summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2009-11-18imx: copy constants from mx3x.h to mx35.h using the appropriate namespaceUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: copy constants from mx3x.h to mx31.h using the appropriate namespaceUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: copy constants from mx2x.h to mx27.h using the appropriate namespaceUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: copy constants from mx2x.h to mx21.h using the appropriate namespaceUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: reformat mx25.h to match the other platform includesUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: add namespace prefixes for symbols in mx35.hUwe Kleine-König
The old names are still defined using the new names. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: add namespace prefixes for symbols in mx31.hUwe Kleine-König
The old names are still defined using the new names. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: add namespace prefixes for symbols in mx3x.hUwe Kleine-König
The old names are still defined using the new names. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: add namespace prefixes for symbols in mx27.hUwe Kleine-König
The old names are still defined using the new names. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: add namespace prefixes for symbols in mx21.hUwe Kleine-König
The old names are still defined using the new names. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: add namespace prefixes for symbols in mx2x.hUwe Kleine-König
The old names are still defined using the new names. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: reorder mx3x.hUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: reorder mx27.hUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: reorder mx21.hUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-18imx: reorder mx2x.hUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-11-14i.MX35: Fix audmux clockSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14MXC: Add a digital audio multiplexer driverSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14i.MX3: Add sound (ssi) resourcesSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14i.MX2: Add sound (ssi) resourcesSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14pcm043: Add NAND supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14pca100: use correct irq initialisation functionSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14pca100: Add board to uncompress.hSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14MXC NFC: Fix NFCs address area on i.MX35Juergen Beisert
The address area of the NFC in the i.MX35 silicon is much larger than 4k. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14MXC NFC: Add the clock resource to support NFC in i.MX35Juergen Beisert
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14imx/gpio: Use handle_level_irqUwe Kleine-König
According to Russell King handle_edge_irq is only useful for "edge-based inputs where the controller does not remember transitions with the input masked." So using handle_edge_irq unconditionally for both edge and level irqs is wrong. Testing showed that the controller does remember transitions while the interrupt is masked. So use handle_level_irq unconditionally. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14MXC: Add support for ULPI ViewportsDaniel Mack
The ARC USB OTG Core has support for accessing ULPI tranceivers through so called ULPI viewports. Export a set of function for use with the USB OTG framework. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: linux-usb@vger.kernel.org Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14mx31moboard: camera supportValentin Longchamp
We have two mt9t031 cameras that have a muxed bus on the robot. Only one is currently initialized because of limitations in soc_camera that should be removed later. Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14mx31moboard: initialize ipu device for all the boardsValentin Longchamp
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14mx31moboard: SPI and MC13783 voltage regulator supportValentin Longchamp
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14mx31moboard: support for pin linked for battery presence checkValentin Longchamp
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14mx31moboard: serial port fixValentin Longchamp
We get rid of CTS/RTS lines on uart0 on our platform. This is the port we use as main kernel console. We do not want it to be blocking because of CTS/RTS signals, not allowing the system to boot or print messages. However we often use it with a bluetooth module needing CTS/RTS lines as backup login in case of trouble. To be able to use it, we assert CTS low so that the module can always send chars. Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14mx31: various pins used for mx31moboardValentin Longchamp
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14Armadillo500 Add support for Seiko Instruments S-35390A rtc over i2c.Alberto Panizzo
The RTC chip Seiko Instruments S-35390A is connected to the Application Processor over the second bus i2c with the hard coded address 0x30. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14Armadillo500 Add i2c second bus support.Alberto Panizzo
This add pin allocation an device registration for the second bus i2c. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14Armadillo500 Correct bus length for SMSC9118 on board chip.Alberto Panizzo
Armadillo500 Correct bus length for SMSC9118 on board chip. The SMSC9118 network chip is connected to the data bus with a 16 bit interface, not 32 as early suggested. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14Armadillo500 Add support for onboard GPIO Buttons.Alberto Panizzo
There are two low active Buttons on boards. This patch connect those to the Input Subsystem over gpio-keys driver. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14ARM: MX3: add MX3X_UART1_BASE_ADDR for uncompression on lilly1131Daniel Mack
Reported-by: Jörg Knobloch <knobloch@incostartec.com> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14ARM: MX3: Add pad config for MMC pins on lilly-dbDaniel Mack
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14ARM: MX3: add support for mc13783 on lilly-dbDaniel Mack
The chip is actually located on the module, not on the base board. But other base boards might add more SPI devices, so the spi_board_info struct must be separated from the module code. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14ARM: MX3: add SPI functions for lilly1131-dbDaniel Mack
This adds support for the two SPI busses found on the lilly1131 module. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14ARM: MX3: remove I2C defintions from mx31lilly.cDaniel Mack
The module does not use these pins for I2C but for SPI. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-03Merge branch 'for-linus' of git://github.com/at91linux/linux-2.6-at91Linus Torvalds
* 'for-linus' of git://github.com/at91linux/linux-2.6-at91: at91: at91sam9g45 family: identify several chip versions avr32: add two new at91 to cpu.h definition
2009-11-03at91: at91sam9g45 family: identify several chip versionsNicolas Ferre
cpu_is_xxx() macros are identifying generic at91sam9g45 chip. This patch adds the capacity to differentiate Engineering Samples and final lots through the inclusion of at91_cpu_fully_identify() and the related chip IDs with chip version field preserved. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2009-11-03avr32: add two new at91 to cpu.h definitionNicolas Ferre
Somme common drivers will need those at91 cpu_is_xxx() definitions. As at91sam9g10 and at91sam9g45 are on the way to linus' tree, here is the patch that adds those chips to cpu.h in AVR32 architecture. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-11-03Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (38 commits) MIPS: O32: Fix ppoll MIPS: Oprofile: Rename cpu_type from godson2 to loongson2 MIPS: Alchemy: Fix hang with high-frequency edge interrupts MIPS: TXx9: Fix spi-baseclk value MIPS: bcm63xx: Set the correct BCM3302 CPU name MIPS: Loongson 2: Set cpu_has_dc_aliases and cpu_icache_snoops_remote_store MIPS: Avoid potential hazard on Context register MIPS: Octeon: Use lockless interrupt controller operations when possible. MIPS: Octeon: Use write_{un,}lock_irq{restore,save} to set irq affinity MIPS: Set S-cache linesize to 64-bytes for MTI's S-cache MIPS: SMTC: Avoid queing multiple reschedule IPIs MIPS: GCMP: Avoid accessing registers when they are not present MIPS: GIC: Random fixes and enhancements. MIPS: CMP: Fix memory barriers for correct operation of amon_cpu_start MIPS: Fix abs.[sd] and neg.[sd] emulation for NaN operands MIPS: SPRAM: Clean up support code a little MIPS: 1004K: Enable SPRAM support. MIPS: Malta: Enable PCI 2.1 compatibility in PIIX4 MIPS: Kconfig: Fix duplicate default value for MIPS_L1_CACHE_SHIFT. MIPS: MTI: Fix accesses to device registers on MIPS boards ...
2009-11-03Merge branch 'fixes-s3c-2632-rc5' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'fixes-s3c-2632-rc5' of git://git.fluff.org/bjdooks/linux: ARM: S3C2410: Fix sparse warnings in arch/arm/mach-s3c2410/gpio.c ARM: S3C2440: mini2440: Fix spare warnings ARM: S3C24XX: Fix warnings in arch/arm/plat-s3c24xx/gpio.c ARM: S3C2440: mini2440: Fix missing CONFIG_S3C_DEV_USB_HOST ARM: S3C24XX: arch/arm/plat-s3c24xx: Move dereference after NULL test ARM: S3C: Fix adc function exports ARM: S3C2410: Fix link if CONFIG_S3C2410_IOTIMING is not set ARM: S3C24XX: Introduce S3C2442B CPU ARM: S3C24XX: Define a macro to avoid compilation error ARM: S3C: Add info for supporting circular DMA buffers ARM: S3C64XX: Set rate of crystal mux ARM: S3C64XX: Fix S3C64XX_CLKDIV0_ARM_MASK value
2009-11-02Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: Revert "[IA64] fix percpu warnings" [IA64] fix percpu warnings [IA64] SMT friendly version of spin_unlock_wait() [IA64] use printk_once() unaligned.c/io_common.c [IA64] Require SAL 3.2 in order to do extended config space ops [IA64] unsigned cannot be less than 0 in sn_hwperf_ioctl() [IA64] Restore registers in the stack on INIT [IA64] Re-implement spinaphores using ticket lock concepts [IA64] Squeeze ticket locks back into 4 bytes.
2009-11-02Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: ensure initial page tables are setup for SMP systems ARM: 5776/1: Check compiler version and EABI support when adding ARM unwind support. ARM: 5774/1: Fix Realview ARM1176PB board reboot ARM: Fix errata 411920 workarounds ARM: Fix sparsemem with SPARSEMEM_EXTREME enabled ARM: Use GFP_DMA only for masks _less_ than 32-bit ARM: integrator: allow Integrator to be built with highmem ARM: Fix signal restart issues with NX and OABI compat
2009-11-02Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Make EFI RTC function depend on 32bit again x86-64: Fix register leak in 32-bit syscall audting x86: crash_dump: Fix non-pae kdump kernel memory accesses x86: Side-step lguest problem by only building cmpxchg8b_emu for pre-Pentium x86: Remove STACKPROTECTOR_ALL
2009-11-02Revert "[IA64] fix percpu warnings"Tony Luck
This reverts commit b94b08081fcecf83fa690d6c5664f6316fe72208. genksyms currently cannot handle complicated types for exported percpu variables. Drop this patch for now as it prevents a module from being loaded on sn2 systems: xpc: no symbol version for per_cpu____sn_cnodeid_to_nasid xpc: Unknown symbol per_cpu____sn_cnodeid_to_nasid Signed-off-by: Tony Luck <tony.luck@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-11 18:46:49 +0000