summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2011-11-23ARM: OMAP2: select ARM_AMBA if OMAP3_EMU is definedMing Lei
This patch selects ARM_AMBA if OMAP3_EMU is defined because OC_ETM depends on ARM_AMBA, so fix the link failure[1]. [1], arch/arm/kernel/built-in.o: In function `etm_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:609: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:409: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etm_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:640: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:646: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:648: undefined reference to `amba_driver_unregister' arch/arm/kernel/built-in.o: In function `etm_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:545: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:595: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:347: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:392: undefined reference to `amba_release_regions' arch/arm/mach-omap2/built-in.o: In function `emu_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:62: undefined reference to `amba_device_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:63: undefined reference to `amba_device_register' make: *** [.tmp_vmlinux1] Error 1 making modules Signed-off-by: Ming Lei <tom.leiming@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23ARM: OMAP: smartreflex: fix IRQ handling bugFelipe Balbi
Fix a bug which has been on this driver since it was added by the original commit 984aa6db which would never clear IRQSTATUS bits. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23ARM: OMAP: PM: only register TWL with voltage layer when device is presentKevin Hilman
Current code registers voltage layer details for TWL PMIC even when a TWL has not been registered. Fix this to only register the TWL with voltage layer when the TWL PMIC is initialized by board-level code. Signed-off-by: Kevin Hilman <khilman@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23ARM: OMAP: hwmod: Fix the addr space, irq, dma count APIssricharan
The address spaces, irqs and dma reqs count APIs return the number of corresponding entries in a hwmod including a additional null value or a -1 terminator in the structure introduced recently. More information here: - 212738a4: omap_hwmod: use a terminator record with omap_hwmod_mpu_irqs arrays - 78183f3f: omap_hwmod: use a null structure record to terminate omap_hwmod_addr_space arrays - bc614958: omap_hwmod: use a terminator record with omap_hwmod_dma_info arrays The issue with irqs and dma info was originally reported by Benoit Cousson. The devices which have multiple hwmods and use device_build_ss are broken with this, as their resources are populated with a extra null value, subsequently the probe fails. So fix the API not to include the array terminator in the count. Reported-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimar@ti.com> Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: fsl-rio: fix compile error
2011-11-14fsl-rio: fix compile errorLiu Gang
The "#include <linux/module.h>" was replaced by "#include <linux/export.h>" in the patch "powerpc: various straight conversions from module.h --> export.h". This will cause the following compile problem: arch/powerpc/sysdev/fsl_rio.c: In function 'fsl_rio_mcheck_exception': arch/powerpc/sysdev/fsl_rio.c:296: error: implicit declaration of function 'search_exception_tables'. The file fsl_rio.c needs the declaration of function "search_exception_tables" in the header file "linux/module.h". Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-11-14blackfin: Fixup export.h includesLars-Peter Clausen
Commit 8dc7a9c84 ("blackfin: Add export.h to files using EXPORT_SYMBOL/THIS_MODULE") inserted some of the include statements into sections protected by an unrelated #if CONFIG_... statement. This can cause, depending on the configuration used, warnings like this one: arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: data definition has no type or storage class arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’ arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: parameter names (without types) in function declaration This patch fixes it by moving the includes out of the #if protected sections. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2011-11-14Blackfin: add serial TX IRQ in individual platform resourceSonic Zhang
The serial TX IRQ is not simply (RX IRQ + 1) on some Blackfin chips, so move the values to the platform resources. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2011-11-14Merge branch 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
* 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-sh: ARM: mach-shmobile: cpuidle single/global and last_state fixes ARM: mach-shmobile: move helper macro PORTCR to sh_pfc.h ARM: mach-shmobile: move helper macro PORT_xx to sh_pfc.h ARM: mach-shmobile: move helper macro PORT_DATA_xx to sh_pfc.h ARM: mach-shmobile: ap4evb: remove white space from end of line ARM: mach-shmobile: clock-sh7372: remove un-necessary index ARM: mach-shmobile: kota2: add comment out separator ARM: mach-shmobile: sh73a0: add MMC data pin pull-up
2011-11-14Merge branch 'sh-fixes-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
* 'sh-fixes-for-linus' of git://github.com/pmundt/linux-sh: mailmap: Fix up some renesas attributions sh: clkfwk: Kill off remaining debugfs cruft. drivers: sh: Kill off dead pathname for runtime PM stub. drivers: sh: Generalize runtime PM platform stub. sh: Wire up process_vm syscalls. sh: clkfwk: add clk_rate_mult_range_round() serial: sh-sci: Fix up SH-2A SCIF support. sh: Fix cached/uncaced address calculation in 29bit mode
2011-11-12Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm/imx: fix imx6q mmc error when mounting rootfs arm/imx: fix AUTO_ZRELADDR selection arm/imx: fix the references to ARCH_MX3 ARM: mx51/53: set pwm clock parent to ipg_perclk arm/tegra: enable headphone detection gpio on seaboard arm/dt: Fix ventana SDHCI power-gpios arm/tegra: Don't create duplicate gpio and pinmux devices ARM: at91: Fix USBA gadget registration atmel/spi: fix missing probe at91/yl-9200: Fix section mismatch at91: vmalloc fix missing AT91_VIRT_BASE define ARM: at91: usart: drop static map regs for dbgu ARM: picoxcell: add extra temp register to addruart ARM: msm: fix compilation flags for MSM_SCM arm/mxs: fix mmc device adding for mach-mx28evk ARM: mxc: Remove test_for_ltirq ARM:i.MX: fix build error in clock-mx51-mx53.c ARM:i.MX: fix build error in tzic/avic.c ARM: mxc: fix local timer interrupt handling msm: boards: Fix fallout from removal of machine_desc in fixup
2011-11-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (29 commits) m68k/mac: Remove mac_irq_{en,dis}able() wrappers m68k/irq: Remove obsolete support for user vector interrupt fixups m68k/irq: Remove obsolete m68k irq framework m68k/q40: Convert Q40/Q60 to genirq m68k/sun3: Convert Sun3/3x to genirq m68k/sun3: Use the kstat_irqs_cpu() wrapper m68k/apollo: Convert Apollo to genirq m68k/vme: Convert VME to genirq m68k/hp300: Convert HP9000/300 and HP9000/400 to genirq m68k/mac: Optimize interrupts using chain handlers m68k/mac: Convert Mac to genirq m68k/amiga: Optimize interrupts using chain handlers m68k/amiga: Convert Amiga to genirq m68k/amiga: Refactor amiints.c m68k/atari: Remove code and comments about different irq types m68k/atari: Convert Atari to genirq m68k/irq: Add genirq support m68k/irq: Remove obsolete IRQ_FLG_* users m68k/irq: Rename {,__}m68k_handle_int() m68k/irq: Add m68k_setup_irq_controller() ...
2011-11-12Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/kvm: Fix build failure with HV KVM and CBE powerpc/ps3: Fix lv1_gpu_attribute hcall powerpc/ps3: Fix PS3 repository build warnings powerpc/ps3: irq: Remove IRQF_DISABLED powerpc/irq: Remove IRQF_DISABLED powerpc/numa: NUMA topology support for PowerNV powerpc: Add System RAM to /proc/iomem powerpc: Add KVM as module to defconfigs powerpc/kvm: Fix build with older toolchains powerpc, tqm5200: update tqm5200_defconfig to fit for charon board. powerpc/5200: add support for charon board
2011-11-11Merge branch 'rc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Fix missing system calls check on mips.
2011-11-11bma023: Add SFI translation for this deviceWilliam Douglas
This needed the sfi IRQ 0xFF fix to go in first. It simply plumbs in the bma023 driver with the firmware naming of it. Signed-off-by: William Douglas <william.douglas@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-11vrtc: change its year offset from 1960 to 1972Feng Tang
Real world year equals the value in vrtc YEAR register plus an offset. We used 1960 as the offset to make leap year consistent, but for a device's first use, its YEAR register is 0 and the system year will be parsed as 1960 which is not a valid UNIX time and will cause many applications to fail mysteriously. So we use 1972 instead to fix this issue. Updated patch which adds a sanity check suggested by Mathias This isn't a change in behaviour for systems, because 1972 is the one we actually use. It's the old version in upstream which is out of sync with all devices. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-11ce4100: fix a build errorZhang Rui
Fix a build error. CE4100 with no serial errors because the alternate function is only a prototype not a null function as intended. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-11Merge branch 'picoxcell-fixes' of git://github.com/jamieiles/linux-2.6-ji ↵Olof Johansson
into fixes
2011-11-11Merge branch 'imx-fixes-for-arnd' of ↵Olof Johansson
git://git.pengutronix.de/git/imx/linux-2.6 into fixes
2011-11-11arm/imx: fix imx6q mmc error when mounting rootfsShawn Guo
The following error is seen in some case when mounting rootfs from SD/MMC cards. Waiting for root device /dev/mmcblk0p1... mmc1: host does not support reading read-only switch. assuming write-enable. mmc1: new high speed SDHC card at address b368 mmcblk0: mmc1:b368 SDC 3.74 GiB mmcblk0: p1 mmc1: Timeout waiting for hardware interrupt. mmcblk0: error -110 transferring data, sector 3678224, nr 40, cmd response 0x900, card status 0xc00 end_request: I/O error, dev mmcblk0, sector 3678225 Buffer I/O error on device mmcblk0p1, logical block 458754 lost page write due to I/O error on mmcblk0p1 This patch fixes the problem by lowering the usdhc clock and correcting watermark configuration. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Chris Ball <cjb@laptop.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-11arm/imx: fix AUTO_ZRELADDR selectionShawn Guo
The AUTO_ZRELADDR selection for ARCH_IMX_V4_V5 and ARCH_MX5 should really be mutually exclusive to ZBOOT_ROM just like what ARCH_IMX_V6_V7 does. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-11arm/imx: fix the references to ARCH_MX3Shawn Guo
The config symbol ARCH_MX3 has been removed by commit 'a89cf59 arm/imx: merge i.MX3 and i.MX6', and it should not be referenced any more. The patch also change ARCH_MX* to SOC_IMX* for other platforms. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-11ARM: mx51/53: set pwm clock parent to ipg_perclkRichard Zhao
Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-11ARM: mach-shmobile: cpuidle single/global and last_state fixesMagnus Damm
The following commits break cpuidle on SH-Mobile ARM: 46bcfad cpuidle: Single/Global registration of idle states e978aa7 cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state This patch remedies these issues by up-porting the SH-Mobile code to fit with the above introduced framework changes. It is worth noting that the new code becomes significantly cleaner, so these framework changes are very welcome. At the same time this breakage could probably have been avoided by grepping for "last_state" and "cpuidle_register_driver". Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: move helper macro PORTCR to sh_pfc.hKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: move helper macro PORT_xx to sh_pfc.hKuninori Morimoto
This patch moves PORT_xx helper macro to sh_pfc.h, and it expects CPU_ALL_PORT() macro for each CPU Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: move helper macro PORT_DATA_xx to sh_pfc.hKuninori Morimoto
This patch move PORT_DATA_xx helper macro to sh_pfc.h. and pfc-sh7372.c used it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: ap4evb: remove white space from end of lineKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: clock-sh7372: remove un-necessary indexKuninori Morimoto
it is not necessary to have sh7372_xxxx index on static variable Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: kota2: add comment out separatorKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11ARM: mach-shmobile: sh73a0: add MMC data pin pull-upKuninori Morimoto
This patch adds MMC data pin pull-up option for pfc-sh73a0.c, and select it on ag5evm board. The MMC read/write will be error without this patch. Cc: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11Merge branches 'sh/pm-runtime' and 'common/clkfwk' into sh-fixes-for-linusPaul Mundt
2011-11-11drivers: sh: Generalize runtime PM platform stub.Paul Mundt
The runtime PM platform support stub in use by ARM-based SH/R-Mobile platforms contains nothing that's specifically ARM-related and instead of wholly generic to anything using the clock framework. The recent runtime PM changes interact rather badly with the lazy disabling of clocks late in the boot process through the clock framework, leading to situations where the runtime suspend/resume paths are entered without a clock being actively driven due to having been lazily gated off. In order to correct this we can trivially tie in the aforementioned stub as a general fallback for all SH platforms that don't presently have their own runtime PM implementations (the corner case being SH-based SH-Mobile platforms, which have their own stub through the hwblk API -- which in turn has bitrotted and will be subsequently adapted to use the same stub as everyone else), regardless of whether the platforms choose to define power domains of their own or not. This fixes up regressions for clock framework users who also build in runtime PM support without any specific power domains of their own, which was previously causing the serial console to be lost when warring with lazy clock disabling. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11sh: Wire up process_vm syscalls.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-09Merge branch 'msm-fix' of git://codeaurora.org/quic/kernel/davidb/linux-msm ↵Olof Johansson
into fixes
2011-11-09Merge branch 'for-3.2/fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra into fixes
2011-11-09arm/tegra: enable headphone detection gpio on seaboardYufeng Shen
Enable the headphone detection gpio on tegra platform. Signed-off-by: Yufeng Shen <miletus@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-09arm/dt: Fix ventana SDHCI power-gpiosStephen Warren
Ventana uses the same SDHCI GPIOs as Seaboard; PI6 (70) is the power GPIO for the SD port, and there is no power GPIO for the MMC chip. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-09arm/tegra: Don't create duplicate gpio and pinmux devicesStephen Warren
*_pinmux_init() register the GPIO and pinmux devices so that they're ready before any other device needs them. *_pinmux_init() are also called by board-dt.c in order to set up the GPIO and pinmux configurations. In this case, if we register the devices, they end up being probed once due to this registration, and a second time due to a device-tree node (or vice-versa). The second probe fails since the memory regions are already requested. Besides, we don't actually want the duplicated devices. To avoid this duplicate registration, modify *_pinmux_init() to check whether it's running on a DT machine. If not, register the pinmux devices. If so, don't register them. Finally, modify board-dt.c to call the *_pinmux_init() after all devices have been instantiated from device-tree. This allows the GPIO and pinmux devices to be instantiated and initialized before calling functions to configure the hardware. This has one disadvantage: The pinmux and GPIO initialization now happens after /all/ devices are instantiated, rather than after just gpio and pinmux but before anything else. So the correct HW configuration is not in place when e.g. the SD/MMC device is probed. Long-term, this should be solved by doing both: a) Initializing the HW state from DT nodes during GPIO and pinmux device probe. b) Using the deferred driver probe mechanism, so that drivers can defer their probe until after the gpio and pinmux drivers have probed. v2: s/int is_dt/bool is_dt/ v3: Use of_machine_is_compatible inside *_pinmux_init() rather than passing an explicit parameter into the function from outside. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-09Merge branch 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson
2011-11-09Merge branch 'imx/compile-fixes' of ↵Olof Johansson
git://git.linaro.org/people/shawnguo/linux-2.6 into fixes
2011-11-09Merge branch 'mxs/fixes' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson
into fixes
2011-11-09ARM: at91: Fix USBA gadget registrationJochen Friedrich
Since 193ab2a6070039e7ee2b9b9bebea754a7c52fd1b, various AT91 boards don't register USBA adapters anymore due to depending on a now non-existing symbol. Fix the symbol name. Signed-off-by: Jochen Friedrich <jochen@scram.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> CC: stable@kernel.org Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-09at91/yl-9200: Fix section mismatchJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-09at91: vmalloc fix missing AT91_VIRT_BASE defineJean-Christophe PLAGNIOL-VILLARD
VMALLOC_END is defined in terms of AT91_VIRT_BASE but this needs mach/hardware.h for it's definition. In file included from arch/arm/mach-at91/board-usb-a926x.c:26:0: include/linux/mm.h: In function 'is_vmalloc_addr': include/linux/mm.h:305:41: error: 'AT91_VIRT_BASE' undeclared (first use in this function) include/linux/mm.h:305:41: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com>
2011-11-09ARM: at91: usart: drop static map regs for dbguJean-Christophe PLAGNIOL-VILLARD
In commit fb149f9e28354 we introduce ioremap support for static map_io, we do not need this register entry anymore. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-09kbuild: Fix missing system calls check on mips.David Daney
Commit 5f7efb4 (Kbuild: append missing-syscalls to the default target list) broke MIPS build. Reported-tested-and-acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-11-09ARM: picoxcell: add extra temp register to addruartJamie Iles
639da5ee3 (ARM: add an extra temp register to the low level debugging addruart macro) didn't include picoxcell as it hadn't been merged at the time. Fix up the compile breakage by adding the extra temp parameter. Signed-off-by: Jamie Iles <jamie@jamieiles.com>
2011-11-08m68k/mac: Remove mac_irq_{en,dis}able() wrappersFinn Thain
Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Remove obsolete support for user vector interrupt fixupsGeert Uytterhoeven
It was used on Apollo only, before its conversion to genirq. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-17 01:53:54 +0000