summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2008-04-19[ARM] pxa: cleanup the coding style of pxa_gpio_set_type()eric miao
by 1. wrapping long lines and making comments tidy 2. using IRQ_TYPE_* instead of migration macros __IRQT_* 3. introduce a pr_debug() for the commented printk(KERN_DEBUG ...) stuff Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] pxa: make GPIO IRQ code less dependent on the internal IRQseric miao
by: 1. introduce dedicated pxa_{mask,unmask}_low_gpio() 2. remove set_irq_chip(IRQ_GPIO_2_x, ...) which has already been initialized in pxa_init_irq() 3. introduce dedicated pxa_init_gpio_set_wake() Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] pxa: generalize the muxed gpio IRQ handling code with loop and ffs()eric miao
1. As David Brownell suggests, using ffs() is going to make the loop a bit faster (by avoiding unnecessary shift and iteration) 2. Russell suggested find_{first,next}_bit() being used with the gedr[] array Signed-off-by: eric miao <eric.miao@marvell.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4832/2: Support AC97CLK on PXA3xx via the clock APIMark Brown
The AC97 clock rate on PXA3xx is generated with a configurable divider from sys_pll. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4831/2: Add PXA2xx AC97 clocks to clock APIMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4830/1: Add support for the CLK_POUT pin on PXA3xx CPUsMark Brown
Expose control of the PXA3xx 13MHz CLK_POUT pin via the clock API Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] remove redundant display of free swap space in show_mem()Johannes Weiner
Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] Fix kernel mode preemptionRussell King
Luc Van Oostenryck reported: The code removed by this patch tested the irq_cpustat_t members __local_irq_count and __local_bh_count but these fields have been removed some time ago: http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commitdiff;h=3ab146c93e039dec99fec8d441a8dd046fe510cc Fix this oversight. Acked-by: Bill Gatliff <bgat@billgatliff.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4881/1: print unrecognised processor ID as part of failure messageLennert Buytenhek
If we fail to boot due to an unsupported processor ID, print the processor ID as part of the failure message. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4854/1: fix the load address of uImage for CONFIG_ZBOOT_ROM=yUwe Kleine-König
U-Boot puts an image at the load address specified in the uImage header before jumping to the entry point. In the CONFIG_ZBOOT_ROM case ZBOOT_ROM_TEXT is the right load address. Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4852/1: Add timerfd_create, timerfd_settime and timerfd_gettime ↵Uwe Kleine-König
syscall entries Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] Update mach-typesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-18Convert asm/semaphore.h users to linux/semaphore.hMatthew Wilcox
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18arch: Remove unnecessary inclusions of asm/semaphore.hMatthew Wilcox
None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have fix any build failures as they come up. Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26: (1090 commits) [NET]: Fix and allocate less memory for ->priv'less netdevices [IPV6]: Fix dangling references on error in fib6_add(). [NETLABEL]: Fix NULL deref in netlbl_unlabel_staticlist_gen() if ifindex not found [PKT_SCHED]: Fix datalen check in tcf_simp_init(). [INET]: Uninline the __inet_inherit_port call. [INET]: Drop the inet_inherit_port() call. SCTP: Initialize partial_bytes_acked to 0, when all of the data is acked. [netdrvr] forcedeth: internal simplifications; changelog removal phylib: factor out get_phy_id from within get_phy_device PHY: add BCM5464 support to broadcom PHY driver cxgb3: Fix __must_check warning with dev_dbg. tc35815: Statistics cleanup natsemi: fix MMIO for PPC 44x platforms [TIPC]: Cleanup of TIPC reference table code [TIPC]: Optimized initialization of TIPC reference table [TIPC]: Remove inlining of reference table locking routines e1000: convert uint16_t style integers to u16 ixgb: convert uint16_t style integers to u16 sb1000.c: make const arrays static sb1000.c: stop inlining largish static functions ...
2008-04-18Allow the L2X0 outer cache support to be configurableCatalin Marinas
By default, this option was selected by the platform Kconfig. This patch adds "depends on" to L2X0 so that it can be enabled/disabled manually. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Add the configuration and build changes for PB1176Bahadir Balban
This patch enables the building of Linux for the PB1176 platform. Signed-off-by: Bahadir Balban <bahadir.balban@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Base support for the PB1176 platformBahadir Balban
This patch adds the base files for the PB1176 platform support. Signed-off-by: Bahadir Balban <bahadir.balban@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Add compactflash support for the PB11MPCore platformBahadir Balban
This patch adds the resource and device definitions for the compact flash. Signed-off-by: Bahadir Balban <bahadir.balban@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Enable the configuration options for PB11MPCoreBahadir Balban
This patch adds the PB11MPCore support to the corresponding Kconfig and Makefile to enable building. Signed-off-by: Bahadir Balban <bahadir.balban@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Add the SMP initialisation support for PB11MPCoreCatalin Marinas
This patch adds the initialisation calls for the SMP support on the PB11MPCore platform. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Base support for the PB11MPCore platformBahadir Balban
This patch adds the base files for the PB11MPCore platform support. Signed-off-by: Bahadir Balban <bahadir.balban@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Allow ARMv7 support for RealView/EBCatalin Marinas
This patch changes the CPU_V7 configuration dependency to allow MACH_REALVIEW_EB. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Move more device address definitions to board-eb.hCatalin Marinas
The upcoming PB11MPCore and PB1176 have different memory maps and some of the definitions in platform.h are no longer common. This patch moves them to the board-eb.h file and updates their usage in realview_eb.c. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Move the UART definitions to EB specific filesCatalin Marinas
Since the PB1176 has different UART base addresses, this patch moves the definitions form platorm.h to board-eb.h. It also modifies uncompress.h to detect the platform type at run-time. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Move the timer definitions into the EB specific filesCatalin Marinas
This patch moves the timer definitions from platform.h into board-eb.h as they are different on PB11MPCore and PB1176. It also adds timerX_va_base variables in core.c which are set by the realview_eb_timer_init function before invoking realview_timer_init. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Move the flash definitions out of platform.hCatalin Marinas
This patch moves the patch definitions into board-eb.h and realview_eb.c (from core.c) as they are different on the PB11MPCore and PB1176 platforms. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Move the EB GIC definitions to the board fileCatalin Marinas
This is in preparation for the RealView PB11MPCore and PB1176 patches which have different base addresses for the GIC. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18Add RealView/EB support for the LAN9118 Ethernet chipCatalin Marinas
RealView/EB revD platform comes with the SMSC LAN9118 Ethernet chip. This patch allows either the smc91x or the smc911x drivers to be used with the RealView/EB platform. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18RealView: Move the SCU initialisation out of __v6_setupCatalin Marinas
This patch moves the SCU initialisation from __v6_setup to the smp_prepare_cpus() function as it relies on platform-specific settings. Changes to get_core_count() are mainly for allowing cleaner code with the upcoming PB11MPCore patches. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18Linux Thumb-2 support for user-space applicationsPaul Brook
This patch implements Thumb-2 application support in Linux. Original implementation by Paul Brook with fixes for VFP and Neon by Catalin Marinas. Signed-off-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18Add a prefetch abort handlerPaul Brook
This patch adds a prefetch abort handler similar to the data abort one and renames the latter for consistency. Initial implementation by Paul Brook with some renaming by Catalin Marinas. Signed-off-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18ARMv7: Add support for the ThumbEE state saving/restoringCatalin Marinas
This patch adds the detection and handling of the ThumbEE extension on ARMv7 CPUs. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-18x86 PAT: fix mmap() of holesIngo Molnar
do not return a -EINVAL when mmap()-ing PCI holes. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com>
2008-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (137 commits) [SCSI] iscsi: bidi support for iscsi_tcp [SCSI] iscsi: bidi support at the generic libiscsi level [SCSI] iscsi: extended cdb support [SCSI] zfcp: Fix error handling for blocked unit for send FCP command [SCSI] zfcp: Remove zfcp_erp_wait from slave destory handler to fix deadlock [SCSI] zfcp: fix 31 bit compile warnings [SCSI] bsg: no need to set BSG_F_BLOCK bit in bsg_complete_all_commands [SCSI] bsg: remove minor in struct bsg_device [SCSI] bsg: use better helper list functions [SCSI] bsg: replace kobject_get with blk_get_queue [SCSI] bsg: takes a ref to struct device in fops->open [SCSI] qla1280: remove version check [SCSI] libsas: fix endianness bug in sas_ata [SCSI] zfcp: fix compiler warning caused by poking inside new semaphore (linux-next) [SCSI] aacraid: Do not describe check_reset parameter with its value [SCSI] aacraid: Fix down_interruptible() to check the return value [SCSI] sun3_scsi_vme: add MODULE_LICENSE [SCSI] st: rename flush_write_buffer() [SCSI] tgt: use KMEM_CACHE macro [SCSI] initio: fix big endian problems for auto request sense ...
2008-04-18x86: kgdb build fixHarvey Harrison
TF_MASK is no longer defined, use X86_EFLAGS_TF. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-18sh: Fix up L2 cache probe.Paul Mundt
SH7723 is the first hard silicon to implement the L2, and unsurprisingly, does the precise inverse of what the specification alleges. XOR the URAM/L2 size bits to get back in line with the existing parsing logic. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Fix up SH-4A part probe.Paul Mundt
The SH-4A series probe we were relying on doesn't work any more on the newer parts, bump this up to use CVR.CHIP instead so we have consistent behaviour across all of the parts, which is what this should have been testing in the first place. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Add support for SH7723 CPU subtype.Paul Mundt
This adds basic support for the SH7723 MobileR2 CPU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Fix up SH7763 build.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Add migor_ts support to MigoRMagnus Damm
Add support for the migor_ts touch panel to the MigoR board. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Add rs5c732b RTC support to MigoRMagnus Damm
Add support for the rs5c372b RTC chip to MigoR. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Add I2C support to MigoRMagnus Damm
Enable the sh7722 I2C controller on the MigoR board. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Add I2C platform data to sh7722Magnus Damm
Add platform data for the SuperH Mobile I2C block to sh7722. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: MigoR NAND flash support using gen_flashMagnus Damm
Add NAND flash support to the MigoR board by giving board specific data to the gen_nand platform driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: MigoR NOR flash support using physmap-flashMagnus Damm
Add NOR flash support to the MigoR board by giving board specific data to the physmap-flash platform driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Fix up mach-types formatting from merge damage.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: r7780rp: Hook up the I2C and SMBus platform devices.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Use phyical addresses for MigoR smc91x resourcesMagnus Damm
Use physical addresses and change resource name of MigoR ethernet chip. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Use physical addresses for sh7722 USBF resourcesMagnus Damm
Use physical addresses and change resource name to follow data sheet. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 20:50:39 +0000