summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2008-10-16x86: remove irqbalance in kernel for 32 bitYinghai Lu
This has been deprecated for years, the user space irqbalanced utility works better with numa, has configurable policies, etc... Signed-off-by: Yinghai Lu <yhlu.kernel@gmai.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: use 28 bits irq NR for pci msi/msix and htYinghai Lu
also print out irq no in /proc/interrups and /proc/stat in hex, so could tell bus/dev/func. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86_64: make /proc/interrupts work with dyn irq_descYinghai Lu
loop with irq_desc list Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86_64: separate irq_cfgx from irq_cfgx_freeYinghai Lu
so later don't need to compare with -1U Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86_64: rename irq_desc/irq_desc_allocYinghai Lu
change names: irq_desc() ==> irq_desc_alloc __irq_desc() ==> irq_desc Also split a few of the uses in lowlevel x86 code. v2: need to check if desc is null in smp_irq_move_cleanup Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: check with without_new in show_interruptsYinghai Lu
so we don't get new one that we don't need it. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16generic: add irq_desc in function in parameterYinghai Lu
So we could remove some duplicated calling to irq_desc v2: make sure irq_desc in init/main.c is not used without generic_hardirqs Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: remove >= nr_irqs checking with config_have_sparse_irqYinghai Lu
remove irq limit checks - nr_irqs is dynamic and we expand anytime. v2: fix checking about result irq_cfg_without_new, so could use msi again v3: use irq_desc_without_new to check irq is valid Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86, ioapic: replace loop with nr_irqs with for_each_irq_icfgYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: replace loop with nr_irqs with for_each_irq_descYinghai Lu
There are a handful of loops that go from 0 to nr_irqs and use get_irq_desc() on them. These would allocate all the irq_desc entries, regardless of the need for them. Use the smarter for_each_irq_desc() iterator that will only iterate over the present ones. v2: make sure arch without GENERIC_HARDIRQS work too Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: move kstat_irqs from kstat to irq_descYinghai Lu
based on Eric's patch ... together mold it with dyn_array for irq_desc, will allcate kstat_irqs for nr_irq_desc alltogether if needed. -- at that point nr_cpus is known already. v2: make sure system without generic_hardirqs works they don't have irq_desc v3: fix merging v4: [mingo@elte.hu] fix typo [ mingo@elte.hu ] irq: build fix fix: arch/x86/xen/spinlock.c: In function 'xen_spin_lock_slow': arch/x86/xen/spinlock.c:90: error: 'struct kernel_stat' has no member named 'irqs' Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: put irq_2_pin pointer into irq_cfgYinghai Lu
preallocate 32 irq_2_pin entries, and use get_one_free_irq_2_pin() to get one more and link to irq_cfg if needed. so don't waste one where no irq is enabled. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: add irq_cfg in io_apic_64.cYinghai Lu
preallocate size is 32, and if it is not enough, irq_cfg will more via alloc_bootmem() or kzalloc(). (depending on how early we are in system setup) v2: fix typo about size of init_one_irq_cfg ... should use sizeof(struct irq_cfg) v3: according to Eric, change get_irq_cfg() to irq_cfg() v4: squash add irq_cfg_alloc in Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16generic: sparse irqs: use irq_desc() together with dyn_array, instead of ↵Yinghai Lu
irq_desc[] add CONFIG_HAVE_SPARSE_IRQ to for use condensed array. Get rid of irq_desc[] array assumptions. Preallocate 32 irq_desc, and irq_desc() will try to get more. ( No change in functionality is expected anywhere, except the odd build failure where we missed a code site or where a crossing commit itroduces new irq_desc[] usage. ) v2: according to Eric, change get_irq_desc() to irq_desc() Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86, irq: get nr_irqs from madtYinghai Lu
Until now, NR_IRQS was derived from black magic defines that had to be "large enough" to both accomodate NR_CPUS and MAX_NR_IO_APICs. This resulted in a way too large irq_desc[] array on most x86 systems. Especially with larger CPU masks, the size of irq_desc can spiral out of control quickly. So be smarter about it and use precise allocation instead: determine the default maximum possible IRQ number from the ACPI MADT. Use a minimum limit of at least 32 IRQs for broken BIOSes. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: sparse irqs, fix #3Ingo Molnar
fix non-APIC UP build: arch/x86/kernel/built-in.o: In function `setup_arch': : undefined reference to `pin_map_size' arch/x86/kernel/built-in.o: In function `setup_arch': : undefined reference to `first_free_entry' Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: use dyn_array in io_apic_xx.cYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: use nr_irqsYinghai Lu
also add first_free_entry and pin_map_size, which were NR_IRQS derived constants. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: introduce nr_irqsYinghai Lu
at this point nr_irqs is equal NR_IRQS convert a few easy users from NR_IRQS to dynamic nr_irqs. v2: according to Eric, we need to take care of arch without generic_hardirqs Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: enable dyn_array supportYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: alloc dyn_array all togetherYinghai Lu
so could spare some memory with small alignment in bootmem also tighten the alignment checking, and make print out less debug info. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16add per_cpu_dyn_array supportYinghai Lu
allow dyn-array in per_cpu area, allocated dynamically. usage: | /* in .h */ | struct kernel_stat { | struct cpu_usage_stat cpustat; | unsigned int *irqs; | }; | | /* in .c */ | DEFINE_PER_CPU(struct kernel_stat, kstat); | | DEFINE_PER_CPU_DYN_ARRAY_ADDR(per_cpu__kstat_irqs, per_cpu__kstat.irqs, sizeof(unsigned int), nr_irqs, sizeof(unsigned long), NULL); after setup_percpu()/per_cpu_alloc_dyn_array(), the dyn_array in per_cpu area is ready to use. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: add after_bootmem flag for 32bitYinghai Lu
to prepare to use dyn_array support etc. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16Blackfin arch: Zero out bss region in L1/L2 memory.Graf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-16Blackfin arch: add read/write IO accessor functions to BlackfinBryan Wu
This is to kill some compiling warning on DM9000 netdev driver. Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-16[PATCH] remove unused ibcs2/PER_SVR4 in SET_PERSONALITYMartin Schwidefsky
The SET_PERSONALITY macro is always called with a second argument of 0. Remove the ibcs argument and the various tests to set the PER_SVR4 personality. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-16powerpc: fix linux-next build failureStephen Rothwell
Today's linux-next build (powerpc allyesconfig) failed like this: In file included from arch/powerpc/include/asm/mmu-hash64.h:17, from arch/powerpc/include/asm/mmu.h:8, from arch/powerpc/include/asm/pgtable.h:8, from arch/powerpc/mm/slb.c:20: arch/powerpc/include/asm/page.h:76: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'memstart_addr' arch/powerpc/include/asm/page.h:77: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'kernstart_addr' Caused by commit 600715dcdf567c86f8b2c6173fcfb4b873e25a19 ("generic: add phys_addr_t for holding physical addresses") from the tip-core tree. This only fails if CONFIG_RELOCATABLE is set. So include that instead of asm/types.h in asm/page.h for the CONFIG_RELOCATABLE case. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: ppc-dev <linuxppc-dev@ozlabs.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-15cpufreq: remove policy->governor setting in drivers initializationDominik Brodowski
As policy->governor is already set to CPUFREQ_DEFAULT_GOVERNOR in the (always built-in) cpufreq core, we do not need to set it in the drivers. This fixes the sparc64 allmodconfig build failure. Also, remove a totally useles setting of ->policy in cpufreq-pxa3xx.c. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-15Merge branch 'fixes' into for-linusRussell King
Conflicts: arch/arm/mach-versatile/core.c
2008-10-15fix CONFIG_MMCONFIG=n build warningPavel Vasilyev
arch/x86/kernel/acpi/boot.c:100: warning: 'acpi_mcfg_64bit_base_addr' defined but not used http://bugzilla.kernel.org/show_bug.cgi?id=11743 Signed-off-by: Pavel Vasilyev <linuxoid@tochka.ru> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-15Merge branch 'oprofile/x86-oprofile-for-tip' into oprofile/oprofile-for-tipRobert Richter
Conflicts: arch/x86/oprofile/op_model_ppro.c
2008-10-15x86/oprofile: add the logic for enabling additional IBS bitsSuravee Suthikulpanit
This patch adds the logic for enabling additional IBS control bits : * IBS-Fetch IbsRandEn bit (bit 57) * IBS-Op IbsOpCntCtl bit (bit 19) Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-10-15x86/oprofile: reordering functions in nmi_int.cRobert Richter
No functional changes. The intension is to remove static function declarations. Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-10-15oprofile: more whitespace fixesRobert Richter
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-10-15oprofile: whitespace fixesRobert Richter
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-10-15OProfile: Rename IBS sysfs dir into "ibs_op"Robert Richter
The new name is now more close to those used in the spec. Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-10-15OProfile: Rework string handling in setup_ibs_files()Robert Richter
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-10-15OProfile: Rework oprofile_add_ibs_sample() functionRobert Richter
Code looks much more cleaner now. Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-10-15Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Kill unused <asm/debug.h> inclusions MIPS: IP32: Add platform device for CMOS RTC; remove dead code RTC: M48T35: new RTC driver MIPS: IP27: Switch over to RTC class driver MIPS: DS1286: New RTC driver MIPS: IP22/28: Switch over to RTC class driver MIPS: PCI: Scan busses when they are registered MIPS: WGT634U: Add reset button support MIPS: BCM47xx: Use the new SSB GPIO API MIPS: BCM47xx: Remove references to BCM947XX MIPS: WGT634U: Add machine detection message MIPS: Align .data.cacheline_aligned based on CONFIG_MIPS_L1_CACHE_SHIFT MIPS: show_cpuinfo prints the type of the calling CPU MIPS: Fix wrong branch target in new spin_lock code. MIPS: Have a heart for a lonely, lost header file ...
2008-10-15powerpc/mpc5200: Don't touch pipelining for MPC5200BWolfram Sang
MPC5200 needs to have pipelining disabled for ATA to work. MPC5200B does not. So, for the latter, don't touch the original setting from the bootloader. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-10-15powerpc/52xx: Make cuImage more robust in locating immr node.Grant Likely
Current device trees do not have the device_type = soc property set anymore. Fix up the cuImage bootwrapper fragment to still find the IMMR nodes. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-10-15Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (158 commits) powerpc: Fix CHRP PCI config access for indirect_pci powerpc/chrp: Fix detection of Python PCI host bridge on IBM CHRPs powerpc: Fix 32-bit SMP boot on CHRP powerpc: Fix link errors on 32-bit machines using legacy DMA powerpc/pci: Improve detection of unassigned bridge resources hvc_console: Fix free_irq in spinlocked section powerpc: Get USE_STRICT_MM_TYPECHECKS working again powerpc: Reflect the used arguments in machine_init() prototype powerpc: Fix DMA offset for non-coherent DMA powerpc: fix fsl_upm nand driver modular build powerpc/83xx: add NAND support for the MPC8360E-RDK boards powerpc: FPGA support for GE Fanuc SBC610 i2c: MPC8349E-mITX Power Management and GPIO expander driver powerpc: reserve two DMA channels for audio in MPC8610 HPCD device tree powerpc: document the "fsl,ssi-dma-channel" compatible property powerpc: disable CHRP and PMAC support in various defconfigs OF: add fsl,mcu-mpc8349emitx to the exception list powerpc/83xx: add DS1374 RTC support for the MPC837xE-MDS boards powerpc: remove support for bootmem-allocated memory for the DIU driver powerpc: remove non-dependent load fsl_booke PTE_64BIT ...
2008-10-15KVM: ia64: Add intel iommu support for guests.Xiantao Zhang
With intel iommu hardware, we can assign devices to kvm/ia64 guests. Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: ia64: add directed mmio range support for kvm guestsXiantao Zhang
Using vt-d, kvm guests can be assigned physcial devices, so this patch introduce a new mmio type (directed mmio) to handle its mmio access. Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: ia64: Make pmt table be able to hold physical mmio entries.Xiantao Zhang
Don't try to do put_page once the entries are mmio. Set the tag to indicate the mmio space for vmm setting TLB's memory attribute. Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: Move irqchip_in_kernel() from ioapic.h to irq.hXiantao Zhang
Moving irqchip_in_kernel() from ioapic.h to irq.h. Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: Separate irq ack notification out of arch/x86/kvm/irq.cXiantao Zhang
Moving irq ack notification logic as common, and make it shared with ia64 side. Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: Move device assignment logic to common codeXiantao Zhang
To share with other archs, this patch moves device assignment logic to common parts. Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: Device Assignment: Move vtd.c from arch/x86/kvm/ to virt/kvm/Zhang xiantao
Preparation for kvm/ia64 VT-d support. Signed-off-by: Zhang xiantao <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15KVM: VMX: enable invlpg exiting if EPT is disabledMarcelo Tosatti
Manually disabling EPT via module option fails to re-enable INVLPG exiting. Reported-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 12:54:22 +0000