summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2009-09-10[ARM] pxa/em-x270: add vcc_core regulatorMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa/em-x270: remove debug leftoversMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa/em-x270: convert em-x270 to soc-camera as platform-deviceGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa/mioa701: convert mioa701 to the new platform-device soc-camera ↵Guennadi Liakhovetski
interface Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa/pcm990: convert pcm990 to soc-camera as platform-deviceGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa/colibri: add UART MFP configuration for the PXA320 moduleAlex Roman
This patch configures the MFP pads for UART1, UART2, UART3 for the Toradex Colibri PXA320 module. Previously they were just not configured resulting in just the first UART working because it was the only one that was configured by the bootloader (Toradex EBOOT in our case). This patch is against vanilla 2.6.30 and has been tested with the Toradex Orchid carrier board (all three UARTs were functional). Signed-off-by: Alex Roman <alex.roman@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa/colibri: add NAND config for Colibri PXA3xx boardsDaniel Mack
NAND feature will be enabled when the appropriate config option is set. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa/ezx: set IRQ_BOARD_END for EZXDaniel Ribeiro
Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa/littleton: update littleton to use the new gpio_card_detect for mmcEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: factor pxamci gpio handlingRobert Jarzmik
Several boards use always the same pattern with pxamci : request gpio, request irq for that gpio to detect MMC card insertion, request gpio for read-only mode detection, etc ... Now that pxamci provides platform_data to describe simple gpio management of the MMC external controls, use it. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: rpurdie@rpsys.net Cc: drwyrm@gmail.com Cc: sakoman@gmail.com Cc: marek.vasut@gmail.com Cc: s.hauer@pengutronix.de Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxamci: add simple gpio controlsRobert Jarzmik
The MMC block needs 3 external datas to work : - is the MMC card put in "read-only mode" ? - is a MMC card inserted or removed ? - enable power towards the MMC card Several platforms provide these controls through gpios. Expand the platform_data to request and use these gpios is set up by board code. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Pierre.Ossman <pierre@ossman.eu> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa/dma: add debugfs entriesRobert Jarzmik
Add some debug information for PXA DMA : - descriptors queued - channels state - global state -- Since V1: reverted to old register access (no more dma_readl() or dma_writel()). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa/dma: optimize irq handler loopRobert Jarzmik
Reduce loop for dma irq handler callbacks to the minimum required. Since V1: included suggestion from Nicolas Pitre to improve even further the loop. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa/dma: cosmetic move of EXPORT_SYMBOL under their functionsRobert Jarzmik
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: merge {zylonite,littleton}_defconfig into pxa3xx_defconfigHaojian Zhuang
Merge zylonite_defconfig and littleton_defconfig into pxa3xx_defconfig. Since they're similar platform and servicing for same SoC family. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: rename GCU IRQ for consistencyDaniel Mack
For consistency reasons, rename IRQ_GRPHICS to IRQ_GCU. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: add device definition for graphics controllerDaniel Mack
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: add clock definition for graphics controllerDaniel Mack
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: initialize default interrupt priority and use ICHP for IRQ handlingHaojian Zhuang
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: add more registers in interrupt controllerHaojian Zhuang
Add priority registers and new registers of pxa935. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: add cpu_is_pxa950() and Kconfig optionsHaojian Zhuang
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: update cpu_is_xsc3() to include Marvell CPUIDHaojian Zhuang
CPU id is changed in Marvell chip. So update the code in cpu_is_xsc3(). Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: expand irq support for PXA93x and PXA950Haojian Zhuang
PXA93x/950 has additional 64 GPIOs, each is a secondary interrupt source for IRQ_GPIO_2_x, extend PXA_GPIO_IRQ_{BASE,NUM}. PXA93x/950 specific IRQ definitions are added as well. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: support mfp of pxa935Haojian Zhuang
Add and initialize the mfp setting of pxa935 chip. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: add MFP_PULL_FLOATDaniel Mack
There is currently an uncovered case for MFP configuration on PXAs which is selected by setting the PULL_SEL bit but none of the PULL{UP,DOWN}_EN bits. This case is needed to explicitly let pins float, even if the selected alternate function would default to a configuration with a pull resistor enabled. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: remove duplicate mfp definition in machHaojian Zhuang
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: remove left-over struct clk *other field from struct clkPhilipp Zabel
Its removal was omitted when all its uses were removed in 8c3abc7d... "[ARM] pxa: convert to clkdev and match clocks by struct device where possible" Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10KVM guest: fix bogus wallclock physical address calculationGlauber Costa
The use of __pa() to calculate the address of a C-visible symbol is wrong, and can lead to unpredictable results. See arch/x86/include/asm/page.h for details. It should be replaced with __pa_symbol(), that does the correct math here, by taking relocations into account. This ensures the correct wallclock data structure physical address is passed to the hypervisor. Cc: stable@kernel.org Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: VMX: Fix cr8 exiting control clobbering by EPTGleb Natapov
Don't call adjust_vmx_controls() two times for the same control. It restores options that were dropped earlier. This loses us the cr8 exit control, which causes a massive performance regression Windows x64. Cc: stable@kernel.org Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: Optimize kvm_mmu_unprotect_page_virt() for tdpAvi Kivity
We know no pages are protected, so we can short-circuit the whole thing (including fairly nasty guest memory accesses). Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: Protect update_cr8_intercept() when running without an apicAvi Kivity
update_cr8_intercept() can be triggered from userspace while there is no apic present. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: VMX: Fix EPT with WP bit change during pagingSheng Yang
QNX update WP bit when paging enabled, which is not covered yet. This one fix QNX boot with EPT. Cc: stable@kernel.org Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: Use kvm_{read,write}_guest_virt() to read and write segment descriptorsMikhail Ershov
Segment descriptors tables can be placed on two non-contiguous pages. This patch makes reading segment descriptors by linear address. Signed-off-by: Mikhail Ershov <Mike.Ershov@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: x86 emulator: Add adc and sbb missing decoder flagsMohammed Gamal
Add missing decoder flags for adc and sbb instructions (opcodes 0x14-0x15, 0x1c-0x1d) Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: Add missing #includeAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: Add __KERNEL__ guards to exported headersAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: Rename x86_emulate.c to emulate.cAvi Kivity
We're in arch/x86, what could we possibly be emulating? Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: When switching to a vm8086 task, load segments as 16-bitAnthony Liguori
According to 16.2.5 in the SDM, eflags.vm in the tss is consulted before loading and new segments. If eflags.vm == 1, then the segments are treated as 16-bit segments. The LDTR and TR are not normally available in vm86 mode so if they happen to somehow get loaded, they need to be treated as 32-bit segments. This fixes an invalid vmentry failure in a custom OS that was happening after a task switch into vm8086 mode. Since the segments were being mistakenly treated as 32-bit, we loaded garbage state. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: VMX: Adjust rflags if in real mode emulationAvi Kivity
We set rflags.vm86 when virtualizing real mode to do through vm8086 mode; so we need to take it out again when reading rflags. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: SVM: Drop tlb flush workaround in nptAvi Kivity
It is no longer possible to reproduce the problem any more, so presumably it has been fixed. Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: Update cr8 intercept when APIC TPR is changed by userspaceGleb Natapov
Since on vcpu entry we do it only if apic is enabled we should do it when TPR is changed while apic is disabled. This happens when windows resets HW without setting TPR to zero. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: SVM: enable nested svm by defaultJoerg Roedel
Nested SVM is (in my experience) stable enough to be enabled by default. So omit the requirement to pass a module parameter. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: SVM: check for nested VINTR flag in svm_interrupt_allowedJoerg Roedel
Not checking for this flag breaks any nested hypervisor that does not set VINTR. So fix it with this patch. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: SVM: move nested_svm_intr main logic out of if-clauseJoerg Roedel
This patch removes one indentation level from nested_svm_intr and makes the logic more readable. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: SVM: remove unnecessary is_nested check from svm_cpu_runJoerg Roedel
This check is not necessary. We have to sync the vcpu->arch.cr2 always back to the VMCB. This patch remove the is_nested check. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: SVM: move special nested exit handling to separate functionJoerg Roedel
This patch moves the handling for special nested vmexits like #pf to a separate function. This makes the kvm_override parameter obsolete and makes the code more readable. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: SVM: handle errors in vmrun emulation path appropriatlyJoerg Roedel
If nested svm fails to load the msrpm the vmrun succeeds with the old msrpm which is not correct. This patch changes the logic to roll back to host mode in case the msrpm cannot be loaded. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: SVM: remove nested_svm_do and helper functionsJoerg Roedel
This function is not longer required. So remove it. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: SVM: clean up nested vmrun pathJoerg Roedel
This patch removes the usage of nested_svm_do from the vmrun emulation path. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10KVM: SVM: clean up nestec vmload/vmsave pathsJoerg Roedel
This patch removes the usage of nested_svm_do from the vmload and vmsave emulation code paths. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>