summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2010-08-04omap mailbox: Set a device in logical mbox instance for traceabilityHiroshi DOYU
With this patch, you'll get the following sysfs directories. This structure implies that a single platform device, "omap2-mailbox" holds multiple logical mbox instances. This could be the base to add sysfs files for each logical mboxes. Then userland application can access a mbox through sysfs entries if necessary(ex: setting kfifo size dynamically) ~# tree -d -L 2 /sys/devices/platform/omap2-mailbox/ /sys/devices/platform/omap2-mailbox/ |-- driver -> ../../../bus/platform/drivers/omap2-mailbox |-- mbox | |-- dsp <- they are each instances of logical mailbox. | |-- ducati | |-- iva2 | |-- mbox01 | |-- mbox02 | |-- mbox03 | |-- ..... | `-- tesla |-- power `-- subsystem -> ../../../bus/platform This was wrongly dropped by: commit c7c158e57bce6220644f2bcd65d82e1468aa40ec Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: convert block api to kfifoOhad Ben-Cohen
The underlying buffering implementation of mailbox is converted from block API to kfifo due to the simplicity and speed of kfifo. The default size of the kfifo buffer is set to 256 bytes. This value is configurable at compile time (via CONFIG_OMAP_MBOX_KFIFO_SIZE), and can be changed at runtime (via the mbox_kfifo_size module parameter). Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: remove (un)likely macros from cold pathsOhad Ben-Cohen
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox cleanup: split MODULE_AUTHOR lineOhad Ben-Cohen
use multiple MODULE_AUTHOR lines for multiple authors Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04omap: mailbox: convert rwlocks to spinlockOhad Ben-Cohen
rwlocks are slower and have potential starvation issues therefore spinlocks are generally preferred. see also: http://lwn.net/Articles/364583/ Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Kanigeri Hari <h-kanigeri2@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04Mailbox: disable mailbox interrupt when request queueFernando Guzman Lugo
when blk_get_request fails to get the request it is returning without read the message from the mailbox fifo, then when it leaves the isr and interruption is trigger again and again and the workqueue which get elements from the request queue is never executed and the kernel is stuck and shows a softlockup message. Now the mailbox interrupt is disabled when request queue is full and enabled when it pop a elememt form the request queue. Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04Mailbox: new mutext lock for h/w mailbox configurationHiroshi DOYU
mailbox startup and shutdown are being executed against a single H/W module, and a mailbox H/W module is totally __independent__ of the registration of logical mailboxes. So, an independent mutext should be used for startup and shutdown. Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04Mailbox: Check valid registered callback before callingFernando Guzman Lugo
This patch checks if the mailbox user has assinged a valid callback fuction before calling it. Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04Mailbox: flush pending deferred works before freeing blk queueFernando Guzman Lugo
flush pending deferred works before freeing blk_queue to prevent any attempt of access to blk_queue after it was freed Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04Mailbox: free mailbox interrupt before freeing blk queueFernando Guzman Lugo
Free interrupt before freeing blk_queue to avoid any attempt of access to blk_queue after it was freed. Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-08-04Remove ARM default configurations which duplicate omap3_defconfigVincent Sanders
These configurations are no longer useful as the systems they support are covered by the generic omap3_defconfig Signed-off-by:Vincent Sanders <vince@simtec.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-04CRIS: Discard exit.text and .data at runtimeJesper Nilsson
This allows us to handle references from __bug_table. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add cache aligned and read mostly data sectionsJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04Merge commit 'v2.6.35' into kbuild/kbuildMichal Marek
Conflicts: arch/powerpc/Makefile
2010-08-04omap: 3630: disable TLL SAR on 3630 ES1Anand Gadiyar
USBTLL Save-and-Restore is broken in 3630 ES1.0. Having it enabled could result in incorrect register restores as the OMAP exits off-mode. This could potentially result in unexpected wakeup events. (Refer 3630 errata ID i579) This is fixed in ES1.1. So disable it for ES1.0s. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-04OMAP3630: Add ES1.1 and ES1.2 detectionAnand Gadiyar
Add revision detection for ES1.1 and ES1.2. Set default revision as ES1.2. Add CHIP_GE_OMAP3630ES1_1 to detect revisions 1.1 and later. This is needed for at least one feature that is broken in 3630ES1.0 but exists on older (3430 ES3.1) and newer revisions. Additionally, update some of the CHIP_GE_* macros to use other macros for ease of maintenance. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Manjunatha GK <manjugk@ti.com> [tony@atomide.com: update to remove fallthrough handling] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-04omap: device: improve errors handlingArtem Bityutskiy
Do not forget to check the 'platform_device_add_data()' error code in 'omap_device_build_ss()'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-04Merge branch 'devel-map-io' into omap-for-linusTony Lindgren
2010-08-04omap3: introduce omap3_map_ioMike Rapoport
Most OMAP3-based boards use exactly the same code for .map_io method in the machine_desc structure. This patch introduces omap3_map_io and updates board-* files to use it as .map_io method. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-04omap3: Unify omap2_set_globals_3[43,6x]x functionsSergio Aguirre
The only difference between them is the physical address of the uart4 port, which is only present in 36xx chips. We don't really need to care about keeping these 2 functions, since the decision to use uart4 is more cleanly done later when we do have access to omap_revision variable. Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> [tony@atomide.com: added comment for the uart4_phys] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-04CRIS: Return something from profile writeJesper Nilsson
Even if it doesn't matter, we should return something. Also, clean up some formatting. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add ARTPEC-3 and timestamps for sync-serialJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Better ARTPEC-3 support for gpioJesper Nilsson
Add PWM support, correct comment for ARTPEC-3. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add include guardJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Better handling of pinmux settingsJesper Nilsson
Depending on eth, eth_mido and geth fields in wr_hwprot, don't set corresponding pins on gpio port b to gpio mode. This avoids re-resetting the ethernet PHY should this already have been done. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: New DMA defines for ARTPEC-3Jesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: __do_strncpy_from_user: Don't read the byte beyond the nilJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Pagetable for ARTPEC-3Jesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Machine dependent memmap.hJesper Nilsson
Move the old one to mach-fs and replace with a new one that only include the correct one for the machine architecture. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Check if pointer is set before using itJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Machine dependent dma.hJesper Nilsson
Move the old one to mach-fs and replace with a new one that only include the correct one for the machine architecture. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Define __read_mostly for CRISv32Jesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Discard .note.gnu.build-id sectionJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Avoid compilation warning for putsJesper Nilsson
Rename to aputs. Also, simplify code by moving some common code out to macros. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add debug for assembler macrosJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Update for ARTPEC-3Jesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add more delays in DDR setupJesper Nilsson
Also, make DDR latency configurable. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add debug info for assembler codeJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add debug info for assembler codeJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add debug symbols for assembler codeJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Minor formatting fix in traps.cJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: v32: Correct auto-restart of syscallsJesper Nilsson
Register number was incorrect in syscalls that go via the restartblock (e.g, poll). Signed-off-by: Edgar Iglesias <Edgar.Iglesias@axis.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: More ARTPEC-3 support and i2c-boardinfo.Jesper Nilsson
Add standard i2d-devices. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Remove obsolete pinmux.c, now machine dependent.Jesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: kgdb: Fix compilation errorsJesper Nilsson
Paths were not correct and pack_hex_byte() takes two arguments. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: v32: Correct path for intr_vect.hJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: v32: Better irq mapping codeJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: v32: Correct address for romfs in the imageJesper Nilsson
Is after __bss_start, not __vmlinux_end Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Additional mmu settings for ARTPEC-3Jesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Faster syscall entry for CRISv32.Jesper Nilsson
Signed-off-by: Edgar Iglesias <Edgar.Iglesias@axis.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 14:55:57 +0000