summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2012-03-20Merge branch 'imx/defconfig' into next/driversArnd Bergmann
Conflicts: arch/arm/configs/imx_v6_v7_defconfig Resolves one conflict with an earlier branch Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-13Merge branch 'next/devel-samsung-dma' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers * 'next/devel-samsung-dma' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: add support DMA for EXYNOS4X12 SoC ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1 ARM: EXYNOS: Enable MDMA driver (includes dependent base of samsung/cleanup-exynos-clock)
2012-03-13Merge branch 'next/devel-samsung-mmc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers * 'next/devel-samsung-mmc' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci mmc: sdhci-s3c: add platform data for the second capability ARM: SAMSUNG: support the second capability for samsung-soc
2012-03-10ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhciJaehoon Chung
Thomas Arbrahams's patchset have changed the device name in sdhci-s3c.c (mmc: sdhci-s3c: Rework platform data and add device tree support) But didn't change the regulator_consumer name. So maybe didn't initialize the mmc/sd card for exynos4. This patch is fixed that (based-on linux-samsung for-next branch) Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-10ARM: SAMSUNG: support the second capability for samsung-socJaehoon Chung
In mmc, there are capabilities and use the host_caps. That capability is expressed with bit[0:31]. But now..already filled the bit[0:31]... so we need to denote with the other capability field. (if we want to use the cache, powerclass, etc for eMMC.. this field is necessary) Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <Kyungmin.park@samsung.com> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-10ARM: EXYNOS: add support DMA for EXYNOS4X12 SoCBoojin Kim
Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-10ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1Tushar Behera
Amba core assumes the pclk to be named as apb_pclk. During device probe, it tries to get that clock and enable that. When PM_RUNTIME is enabled, dma clock is not explicitly enabled in pl330_probe, which causes device probe to fail. Adding a clkdev entry for apb_pclk for mdma1 fixes the problem. This patch fixes following runtime error. dma-pl330 dma-pl330.2: PERIPH_ID 0x0, PCELL_ID 0x0 ! dma-pl330: probe of dma-pl330.2 failed with error -22 Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-10ARM: EXYNOS: Enable MDMA driverBoojin Kim
This patch adds MDMA platform data and enables MDMA for DMA memcpy operation for EXYNOS SoCs. Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-10ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driverMyungJoo Ham
EXYNOS4212/4412 memory bus devfreq driver requires some register addresses that were not defined with EXYNOS4210 support. This patch adds the required register addresses and shift/mask data. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-10ARM: EXYNOS: add clock registers for exynos4x12-cpufreqJaecheol Lee
Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-10ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clockKukjin Kim
This patch changes prefix of the clk register from S5P_ to EXYNOS4_ for new EXYNOS SoCs such as EXYNOS5 and adds prefix exynos4_ on clk declarations. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-10ARM: EXYNOS: use static declaration on regarding clockKukjin Kim
This patch uses static declaration struct which is not used in other file and re-arrange with group in header file. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-10ARM: EXYNOS: replace clock.c for other new EXYNOS SoCsKukjin Kim
This patch changes the name of clock.c to clock-exynos4.c for other EXYNOS series such as EXYNOS5. And since the header file of clock is used only in arch/arm/mach-exynos, moves it in the local directory. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-10Merge branch 'next/cleanup-use-static' into next/cleanup-exynos-clockKukjin Kim
2012-03-10Merge branch 'sr' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers * 'sr' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP3+: SmartReflex: fix error handling ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API ARM: OMAP3+: SmartReflex: micro-optimization for sanity check ARM: OMAP3+: SmartReflex: misc cleanups ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata() ARM: OMAP3+: hwmod: add SmartReflex IRQs ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register ARM: OMAP3+: SmartReflex: Add a shutdown hook ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP ARM: OMAP3+: SmartReflex: fix err interrupt disable sequence ARM: OMAP3+: SmartReflex: use voltage domain name in device attributes ARM: OMAP2+: Fix devexit for smartreflex when CONFIG_HOTPLUG is not set ARM: OMAP2+: Fix zoom LCD backlight if TWL_CORE is not selected ARM: OMAP2+: Fix board_mux section type conflict when OMAP_MUX is not set ARM: OMAP2+: Fix OMAP_HDQ_BASE build error ARM: OMAP2+: Fix Kconfig dependencies for USB_ARCH_HAS_EHCI ARM: OMAP2+: I2C: always compile I2C reset code, even if I2C driver is not built
2012-03-08Merge branch 'regulator' of git://github.com/hzhuang1/linux into next/driversOlof Johansson
* 'regulator' of git://github.com/hzhuang1/linux: (2 commits) regulator: Remove bq24022 regulator driver pxa: magician/hx4700: Convert to gpio-regulator from bq24022 (plus update to v3.3-rc6)
2012-03-07Merge branch 'topic/cleanup-use-static' into next/cleanup-use-staticKukjin Kim
Conflicts: arch/arm/mach-exynos/dma.c arch/arm/mach-s5p64x0/dma.c arch/arm/mach-s5pc100/dma.c arch/arm/mach-s5pv210/dma.c
2012-03-06pxa: magician/hx4700: Convert to gpio-regulator from bq24022Heiko Stübner
The bq24022 on these machines is a very simple regulator using gpios. One provides the on/off functionality and a second one is used to change the current between 100 and 500 mA. This functionality can also be provided by the more generic gpio-regulator. Therefore convert both machines which makes it possible to remove the bq24022 driver later on. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-03-05ARM: OMAP3+: SmartReflex: fix error handlingJean Pihet
Fix the code to correctly use IS_ERR and PTR_ERR on the return values pointers Reported-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-03-05ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* APIJean Pihet
The debugfs_create_* API returns a return code or NULL in the return ptr in case of problem. Fix the smartreflex code to take this into account. Signed-off-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-03-05ARM: OMAP3+: SmartReflex: micro-optimization for sanity checkFelipe Balbi
val && (val != 1) == val > 1 Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-03-05ARM: OMAP3+: SmartReflex: misc cleanupsFelipe Balbi
There are no functional changes here, only misc cleanups in general: - re-organize variable declarations, - converting if {} else if {} else {} into switch statements, - correct comments typos, - add/remove white lines to improve readability, - etc. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-03-05ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argumentFelipe Balbi
no functional changes, trivial patch. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-03-05ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata()Felipe Balbi
That's very useful to fetch the correct struct sr_info from the PM handlers. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-03-05ARM: OMAP3+: hwmod: add SmartReflex IRQsNishanth Menon
Add OMAP3 SmartReflex IRQs in hwmod structures. Without these IRQs being registered the SmartReflex driver will be unable to get the IRQ numbers to handle notifications. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-03-05ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a needNishanth Menon
The VPBOUNDINTST field of the ERRCONFIG register has an additional functional meaning of force clearing the SR internal signal with VP (sr_interruptz). This can result in scenarios where the VP->SR protocol is violated because the SR internal signal with VP is already high and VP will never clear the vpirqclr signal. Therefore during the next force update to reset to nominal voltage, VP cannot pulse vpirqclr, so the PRCM HW cannot generate the tranxdone IRQ and the situation is not recoverable until a cold reset is invoked. To prevent this situation, check if status is set before clearing it as this needs to be done only on a need basis. Reported-by: Vincent Bour <v-bour@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-03-05ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG registerNishanth Menon
ERRCONFIG register has status bits that were intended not to be destroyed by bad modification. We cleanup and simplify the handling the status in the modify path. Reported-by: Vincent Bour <v-bour@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-03-05ARM: OMAP3+: SmartReflex: Add a shutdown hookNishanth Menon
SmartReflex fix for erratum ID i724. Since OMAP's VP and PRM modules do not get reset by warm reset, we should ensure that proper shutdown procedure is followed prior to allowing the kernel to reboot back up. Without this, Smartreflex module might be left active or system might be caught in an indeterminate sequence when software controlled reboot is triggered, leaving the next reboot behavior to be unpredictable. In the case of hardware controlled warm reset such as that by watchdog timer, prevention of this scenario is not possible. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-03-05ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VPNishanth Menon
SmartReflex AVS Errorgen module supplies signals to Voltage Processor. It is suggested that by disabling Errorgen module before we disable VP, we might be able to ensure lesser chances of race condition to occur in the system. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-03-05ARM: OMAP3+: SmartReflex: fix err interrupt disable sequenceNishanth Menon
sr_modify_mask takes mask, value as parameters, the usage currently is value, mask which is wrong, as a result vpboundint_st which was supposed to have been disabled, does not get disabled. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-03-05ARM: OMAP3+: SmartReflex: use voltage domain name in device attributesShweta Gulati
To set sr ntarget values for all volt_domain, volt_table is retrieved by doing a look_up of 'vdd_name' field from omap_hwmod but voltage domain pointer does not belong to omap_hwmod and is not used anywhere else. As a part of voltage layer and SR Layer clean up volt pointer is removed from omap_hwmod and added in dev attributes of SR. The value of the field must match the voltage domain names for the binding to be effective. Tested on OMAP3630 SDP, OMAP3530 Beagleboard and OMAP4430 SDP Board. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Shweta Gulati <shweta.gulati@ti.com> Acked by: Nishanth Menon <nm@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-03-05Merge branch 'depends/irqdomain' into next/driversArnd Bergmann
This is needed in order for the tegra/soc-drivers branch to work. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-04Merge tag 'tegra-soc-drivers' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra into tegra/soc-drivers Tegra SoC driver support. Some device tree conversions, some new drivers. and a fix for an issue introduced in Grant Likely's irq_domain conversion in his tree. Because of that, this branch depends on his branch to build (but not to merge): git://git.secretlab.ca/git/linux-2.6.git irqdomain/next * tag 'tegra-soc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra: (34 commits) ARM: tegra: uncompress.h: Don't depend on kernel headers gpio: tegra: Fix build issue due to irq_domain rework. ARM: tegra: Remove duplicate PMU interrupt inversion code ARM: tegra: Add a simple PMC driver ARM: tegra: dma: not required to move requestor when stopping. ARM: tegra: Fix EMC pdata initialization from registers gpio: tegra: Parameterize the number of banks gpio: tegra: Dynamically allocate IRQ base, and support DT ARM: tegra: Remove use of TEGRA_GPIO_TO_IRQ ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL ARM: tegra: uncompress.h: Choose a UART at runtime ARM: tegra: uncompress.h: Store UART address in a variable ARM: tegra: Introduce define DEBUG_UART_SHIFT ARM: tegra: Support Tegra30 in decompressor UART setup ARM: tegra: Pause DMA when reading transfer count ARM: tegra: emc: device tree support ARM: tegra: emc: convert tegra2_emc to a platform driver ARM: tegra: fuse: add bct strapping reading ARM: tegra: fuse: add functions to access chip revision ARM: tegra: fuse: use apbio dma for register access ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-03Merge tag 'parisc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6 PARISC fixes from James Bottomley: "This is a set of build fixes to get the cross compiled architecture testbeds building again" * tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] don't unconditionally override CROSS_COMPILE for 64 bit. [PARISC] include <linux/prefetch.h> in drivers/parisc/iommu-helpers.h [PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional
2012-03-03Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled
2012-03-02perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabledJoerg Roedel
It turned out that a performance counter on AMD does not count at all when the GO or HO bit is set in the control register and SVM is disabled in EFER. This patch works around this issue by masking out the HO bit in the performance counter control register when SVM is not enabled. The GO bit is not touched because it is only set when the user wants to count in guest-mode only. So when SVM is disabled the counter should not run at all and the not-counting is the intended behaviour. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Avi Kivity <avi@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Robert Richter <robert.richter@amd.com> Cc: stable@vger.kernel.org # v3.2 Link: http://lkml.kernel.org/r/1330523852-19566-1-git-send-email-joerg.roedel@amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: [S390] memory hotplug: prevent memory zone interleave [S390] crash_dump: remove duplicate include [S390] KEYS: Enable the compat keyctl wrapper on s390x
2012-02-29Merge tag 'fixes-3.3-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Arnd Bergmann says: "Another set of arm-soc bug fixes on top of v3.3-rc5. The few larger bits are all for devices that still need to get set up in board code. Only three platforms are in this set of fixes: omap2+, pxa and lpc32xx." * tag 'fixes-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits) ARM: LPC32xx: serial.c: Fixed loop limit ARM: LPC32xx: serial.c: HW bug workaround ARM: LPC32xx: irq.c: Clear latched event ARM: LPC32xx: Fix interrupt controller init ARM: LPC32xx: Fix irq on GPI_28 ARM: OMAP2: fix mailbox init code ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators ARM: OMAP1: Fix out-of-bounds array access for Innovator OMAP3 EVM: remove out-of-bounds array access of gpio_leds ARM: OMAP: Fix build error when mmc_omap is built as module ARM: OMAP: Fix kernel panic with HSMMC when twl4030_gpio is a module pxa/hx4700: add platform device and I2C info for AK4641 codec arch/arm/mach-pxa/: included linux/gpio.h twice arch/arm/mach-mmp/: some files include some headers twice ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe ARM: pxa: fix including linux/gpio.h twice ARM: pxa: fix mixed declarations and code in sharpsl_pm ARM: pxa: fix wrong parsing gpio event on spitz ARM: OMAP2+: usb-host: fix compile warning ARM: OMAP4: Move the barrier memboclk_steal() as part of reserve callback ...
2012-02-29Merge tag 'for-3.3' of git://openrisc.net/jonas/linuxLinus Torvalds
Build fixes for 3.3 from Jonas Bonn * tag 'for-3.3' of git://openrisc.net/jonas/linux: openrisc: Fix up audit_syscall_[entry|exit]() usage openrisc: include export.h for EXPORT_SYMBOL
2012-02-28Merge tag 'iommu-fixes-v3.3-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu IOMMU fixes for Linux 3.3-rc5 All the fixes are for the OMAP IOMMU driver. The first patch is the biggest one. It fixes the calls of the function omap_find_iovm_area() in the omap-iommu-debug module which expects a 'struct device' parameter since commit fabdbca instead of an omap_iommu handle. The omap-iommu-debug code still passed the handle to the function which caused a crash. The second patch fixes a NULL pointer dereference in the OMAP code and the third patch makes sure that the omap-iommu is initialized before the omap-isp driver, which relies on the iommu. The last patch is only a workaround until defered probing is implemented. * tag 'iommu-fixes-v3.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp iommu/omap: fix NULL pointer dereference iommu/omap: fix erroneous omap-iommu-debug API calls
2012-02-28[PARISC] don't unconditionally override CROSS_COMPILE for 64 bit.James Bottomley
The user may wish to set their own value (for real cross compiles). Since the top level Makefile initialises CROSS_COMPILE to empty by default, we must check it for being empty (rather than for being defined) before we override. Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-28Merge branch 'rtc-sa1100' of git://github.com/hzhuang1/linux into next/driversArnd Bergmann
* 'rtc-sa1100' of git://github.com/hzhuang1/linux: ARM: mmp: enable rtc in pxa910 rtc: sa1100: enable clk support ARM: pxa: add rtc dummy clock ARM: sa1100: clean up clock support rtc: sa1100: declare irq in resource rtc: sa1100: remove verification code of alarm rtc: sa1100: remove periodic code
2012-02-28Merge branch 'imx/driver' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann
into next/drivers * 'imx/driver' of git://git.linaro.org/people/shawnguo/linux-2.6: (3 commits) ARM: imx6q: add cko1 clock ARM: mxc: make imx_dma_is_general_purpose more generic for sdma ARM: imx6: Rename DEBUG_IMX6Q_UART to UART4
2012-02-28Merge branch 'mxs/gpmi' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann
into next/drivers * 'mxs/gpmi' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: add GPMI-NAND support for imx23/imx28
2012-02-28ARM: mmp: enable rtc in pxa910Haojian Zhuang
Support rtc-sa1100 driver in pxa910. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2012-02-28ARM: pxa: add rtc dummy clockHaojian Zhuang
sa1100-rtc driver could be shared among sa1100/pxa/mmp series silicon. Since clk is used in mmp series silicon, add dummy clock support in pxa also. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2012-02-28ARM: sa1100: clean up clock supportJett.Zhou
Add rtc clock support and clean clock support for gpio. Signed-off-by: Jett.Zhou <jtzhou@marvell.com> signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2012-02-28rtc: sa1100: declare irq in resourceHaojian Zhuang
Avoid to hard coded irq in rtc-sa1100 driver since we could share it among arch-sa1100/arch-pxa/arch-mmp. We still keep hard coded register address since the requirement is enabling both rtc-sa1100 and rtc-pxa driver. The register addresses are conflict since they're only two wrappers on the same rtc device. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2012-02-27ARM: tegra: uncompress.h: Don't depend on kernel headersStephen Warren
This fixes the following compile error: CC arch/arm/boot/compressed/misc.o In file included from arch/arm/boot/compressed/misc.c:28:0: arch/arm/mach-tegra/include/mach/uncompress.h: In function 'arch_decomp_setup': arch/arm/mach-tegra/include/mach/uncompress.h:125:2: error: implicit declaration of function 'BUILD_BUG_ON_ZERO' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors This is due to use of the ARRAY_SIZE() macro. Typically, this would be solved by including <linux/bug.h>, but the compressor code isn't part of the kernel, and so should not include kernel headers. Instead, define the few macros the code uses directly, and in a way that doesn't depend on <linux/bug.h>. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-02-27Merge branch 'lpc32xx/fixes' of git://git.antcom.de/linux-2.6 into fixesArnd Bergmann
* 'lpc32xx/fixes' of git://git.antcom.de/linux-2.6: (5 commits) ARM: LPC32xx: serial.c: Fixed loop limit ARM: LPC32xx: serial.c: HW bug workaround ARM: LPC32xx: irq.c: Clear latched event ARM: LPC32xx: Fix interrupt controller init ARM: LPC32xx: Fix irq on GPI_28 Update to Linux 3.3-rc5 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-01 20:39:30 +0000