| Age | Commit message (Collapse) | Author |
|---|
|
The following symbols are needlessly defined global: cpuerr_irq and
memerr_irq. This patch makes the symbols static.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The file arch/mips/sgi-ip32/ip32-berr.c needlessly defines the function
ip32_be_handler() as global, and this patch makes it static.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The file arch/mips/mm/sc-rm7k.c needlessly defines two global symbols:
rm7k_sc_ops
rm7k_tcache_enabled
This patch makes these symbols static.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
au1xxx_power_dev_t? is never defined; get rid of all PM stuff as well
since it is not in the driver source anyway.
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Commit 779e7d41ad004946603da139da99ba775f74cb1c created a name collision
in SMTC builds. The attached patch corrects this in a a
not-too-terribly-ugly manner. Note that the SMTC case has to come
first, because CEVT_R4K will also be true.
Signed-off-by: Kevin D. Kissell <kevink@paralogos.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Kevin D. Kissell <kevink@paralogos.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6:
xtensa: Fix linker script to include .literal sections
xtensa: update s6105_defconfig for ccount calibration
xtensa: implement ccount calibration for s6000
xtensa: fix wrong extern declaration renamed in code using it
xtensa: register gpio chip before use
xtensa: always use correct stack pointer for stack traces
xtensa: Fix checksum header file
xtensa: Fix architecture specific Kconfig
|
|
* 'kvm-updates/2.6.30' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Remove port 80 passthrough
KVM: Make EFER reads safe when EFER does not exist
KVM: Fix NX support reporting
KVM: SVM: Fix cross vendor migration issue with unusable bit
|
|
Commit 9b8de7479d0dbab1ed98b5b015d44232c9d3d08e ("FRV: Fix the section
attribute on UP DECLARE_PER_CPU()") cleaned up DECLARE/DEFINE_PER_CPU()
macros and in the process made alpha percpu.h include
include/asm-generic/percpu.h which breaks compilation due to duplicate
definitions.
Remove inclusion of generic asm helper file and define whatever necessary
in alpha header proper.
In the longer term, percpu definitions will be unified and all these
little subtlties will be removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix resembles implementation from Marc Gauthier and Piet Denaly:
In the Xtensa architecture, assembly generates literals which must always
precede the code (the L32R instruction that loads them only uses negative
PC-relative offsets). For any *.text section, literals are placed in a
corresponding *.literal section. The linker script (vmlinux.lds) must
place these in the correct order. It must also combine them, when the
*.text section can be larger than L32R's 256 kB range.
For example, this doesn't work: *(.literal) *(.text) because L32R
instructions at the end of .text can't reach the literals.
The linker can solve this if they are combined in parentheses, like this:
*(.literal .text)
because it is now allowed mix literals in .text to bring them in range.
None of this is done by standard vmlinux.lds.h macros such as TEXT_TEXT
and INIT_TEXT. To avoid replicating the logic of that header file, we
instead post-process the generated linker script to convert *(xxx.text)
to *(xxx.literal xxx.text) for the following text sections:
.text .ref.text .*init.text .*exit.text .text.*
using a sed script. To do this we must override the default rule for
vmlinux.lds (see scripts/Makefile.build and the top-level Makefile)
to insert this extra step.
Signed-off-by: Marc Gauthier <marc@tensilica.com>
Signed-off-by: Pete Delaney <piet@tensilica.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
The previous patch enabled ccount calibration for the s6000 variant.
This patch updates the defconfig for the s6105 platform to reflect this
change.
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
Calculate core frequency from timers at boot time
instead of assuming a fixed frequency. This is
useful as the true frequency is set up by the
boot loader, thus variable.
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
The variable ccount_nsec has been renamed to nsec_per_ccount
in arch/xtensa/kernel/time.c in 2b8aea74 (2007-08-05),
but the fix failed to rename the variable in
arch/xtensa/include/asm/timex.h as well.
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
Platform initialization sets up the LED heartbeat that is controlled
via GPIO. Requesting the GPIO pins fails, however, as the chip is
only initialized later by a device_initcall().
Fix this up by exporting the initialization function. Let the
platform set up the chip before it starts using it.
Signed-off-by: Johannes Weiner <jw@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
Commit '28a0ce7 xtensa: use correct stack pointer for stack traces'
changed the stack tracer from always reading the stack pointer
register to always using the saved value in the task descriptor.
The author was too dense to consider the fact that the saved stack
value is stale for a running process und thus unusable for 'current'.
What we do now is to use the stack pointer register (a1) for when the
task is unknown - we can't help it then - or when the task is
'current'. For everything else use the saved stack pointer value
contained in the task descriptor.
Signed-off-by: Johannes Weiner <jw@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
We need to add a "memory" dependency (barrier) in assembly macros
that access (read or write) memory. Otherwise, the compiler might
ill-optimize the order of memory accesses.
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
Move a misplace endmenu marker to enable platform options and
disable PCI and automatic calibrating for the XT2K board. The
on-board PCI bridge is somewhat broken, anyway, and the
calibrating relies on some whacky usage of the serial port.
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
* 'for-linus' of git://repo.or.cz/cris-mirror:
CRISv32: Fix typo compile error in ARTPEC-3 gpio driver.
CRIS: Wire up syscalls signalfd4 to writev.
CRISv32: Remove obsolete vcs_hook.o from Makefile
CRIS: Merge machine dependent boot/compressed and boot/rescue
|
|
KVM optimizes guest port 80 accesses by passthing them through to the host.
Some AMD machines die on port 80 writes, allowing the guest to hard-lock the
host.
Remove the port passthrough to avoid the problem.
Cc: stable@kernel.org
Reported-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Tested-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Some processors don't have EFER; don't oops if userspace wants us to
read EFER when we check NX.
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
NX support is bit 20, not bit 1.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
AMDs VMCB does not have an explicit unusable segment descriptor field,
so we emulate it by using "not present". This has to be setup before
the fixups, because this field is used there.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (26 commits)
bonding: fix panic if initialization fails
IXP4xx: complete Ethernet netdev setup before calling register_netdev().
IXP4xx: use "ENODEV" instead of "ENOSYS" in module initialization.
ipvs: Fix IPv4 FWMARK virtual services
ipv4: Make INET_LRO a bool instead of tristate.
net: remove stale reference to fastroute from Kconfig help text
net: update skb_recycle_check() for hardware timestamping changes
bnx2: Fix panic in bnx2_poll_work().
net-sched: fix bfifo default limit
igb: resolve panic on shutdown when SR-IOV is enabled
wimax: oops: wimax_dev_add() is the only one that can initialize the state
wimax: fix oops if netlink fails to add attribute
Bluetooth: Move dev_set_name() to a context that can sleep
netfilter: ctnetlink: fix wrong message type in user updates
netfilter: xt_cluster: fix use of cluster match with 32 nodes
netfilter: ip6t_ipv6header: fix match on packets ending with NEXTHDR_NONE
netfilter: add missing linux/types.h include to xt_LED.h
mac80211: pid, fix memory corruption
mac80211: minstrel, fix memory corruption
cfg80211: fix comment on regulatory hint processing
...
|
|
ENOSYS makes modutils complain about missing kernel module support.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: MCE: make cmci_discover_lock irq-safe
x86: xen, i386: reserve Xen pagetables
x86, kexec: fix crashdump panic with CONFIG_KEXEC_JUMP
x86-64: finish cleanup_highmaps()'s job wrt. _brk_end
x86: fix boot hang in early_reserve_e820()
x86: Fix a typo in a printk message
x86, srat: do not register nodes beyond e820 map
|
|
* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Fix return value for sys_ipc
microblaze: Storage class should be before const qualifier
|
|
Lockdep reports the warning below when Li tries to offline one cpu:
[ 110.835487] =================================
[ 110.835616] [ INFO: inconsistent lock state ]
[ 110.835688] 2.6.30-rc4-00336-g8c9ed89 #52
[ 110.835757] ---------------------------------
[ 110.835828] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
[ 110.835908] swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
[ 110.835982] (cmci_discover_lock){?.+...}, at: [<ffffffff80236dc0>] cmci_clear+0x30/0x9b
cmci_clear() can be called via smp_call_function_single().
It is better to disable interrupt while holding cmci_discover_lock,
to turn it into an irq-safe lock - we can deadlock otherwise.
[ Impact: fix possible deadlock in the MCE code ]
Reported-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A03ED38.8000700@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Shaohua Li<shaohua.li@intel.com>
|
|
The Xen pagetables are no longer implicitly reserved as part of the other
i386_start_kernel reservations, so make sure we explicitly reserve them.
This prevents them from being released into the general kernel free page
pool and reused.
[ Impact: fix Xen guest crash ]
Also-Bisected-by: Bryan Donlan <bdonlan@gmail.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Xen-devel <xen-devel@lists.xensource.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4A032EEC.30509@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Tim Starling reported that crashdump will panic with kernel compiled
with CONFIG_KEXEC_JUMP due to null pointer deference in
machine_kexec_32.c: machine_kexec(), when deferencing
kexec_image. Refering to:
http://bugzilla.kernel.org/show_bug.cgi?id=13265
This patch fixes the BUG via replacing global variable reference:
kexec_image in machine_kexec() with local variable reference: image,
which is more appropriate, and will not be null.
Same BUG is in machine_kexec_64.c too, so fixed too in the same way.
[ Impact: fix crash on kexec ]
Reported-by: Tim Starling <tstarling@wikimedia.org>
Signed-off-by: Huang Ying <ying.huang@intel.com>
LKML-Reference: <1241751101.6259.85.camel@yhuang-dev.sh.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
With the introduction of the .brk section, special care must be taken
that no unused page table entries remain if _brk_end and _end are
separated by a 2M page boundary. cleanup_highmap() runs very early and
hence cannot take care of that, hence potential entries needing to be
removed past _brk_end must be cleared once the brk allocator has done
its job.
[ Impact: avoids undesirable TLB aliases ]
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
If the first non-reserved (sub-)range doesn't fit the size requested,
an endless loop will be entered. If a range returned from
find_e820_area_size() turns out insufficient in size, the range must
be skipped before calling the function again.
[ Impact: fixes boot hang on some platforms ]
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
* master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation types
[ARM] 5506/1: davinci: DMA_32BIT_MASK --> DMA_BIT_MASK(32)
i.MX31: Disable CPU_32v6K in mx3_defconfig.
mx3fb: Fix compilation with CONFIG_PM
mx27ads: move PBC mapping out of vmalloc space
MXC: remove BUG_ON in interrupt handler
mx31: remove mx31moboard_defconfig
ARM: ARCH_MXC should select HAVE_CLK
mxc : BUG in imx_dma_request
mxc : Clean up properly when imx_dma_free() used without imx_dma_disable()
[ARM] mv78xx0: update defconfig
[ARM] orion5x: update defconfig
[ARM] Kirkwood: update defconfig
[ARM] Kconfig typo fix: "PXA930" -> "CPU_PXA930".
[ARM] S3C2412: Add missing cache flush in suspend code
[ARM] S3C: Add UDIVSLOT support for newer UARTS
[ARM] S3C64XX: Add S3C64XX_PA_IIS{0,1} to <mach/map.h>
|
|
From: Bruce Ashfield <bruce.ashfield@windriver.com>
To fully support the armv7-a instruction set/optimizations, support
for the R_ARM_MOVW_ABS_NC and R_ARM_MOVT_ABS relocation types is
required.
The MOVW and MOVT are both load-immediate instructions, MOVW loads 16
bits into the bottom half of a register, and MOVT loads 16 bits into the
top half of a register.
The relocation information for these instructions has a full 32 bit
value, plus an addend which is stored in the 16 immediate bits in the
instruction itself. The immediate bits in the instruction are not
contiguous (the register # splits it into a 4 bit and 12 bit value),
so the addend has to be extracted accordingly and added to the value.
The value is then split and put into the instruction; a MOVW uses the
bottom 16 bits of the value, and a MOVT uses the top 16 bits.
Signed-off-by: David Borman <david.borman@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
As per commit 284901a90a9e0b812ca3f5f852cbbfb60d10249d, use
DMA_BIT_MASK(n)
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
[ Impact: printk message cleanup ]
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
LKML-Reference: <200905040908.27299.knikanth@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The mem= option will truncate the memory map at a specified address so
it's not possible to register nodes with memory beyond the e820 upper
bound.
unparse_node() is only called when then node had memory associated with
it, although with the mem= option it is no longer addressable.
[ Impact: fix boot hang on certain (large) systems ]
Reported-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <alpine.DEB.2.00.0905051248150.20021@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] xen_domu_defconfig: fix build issues/warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: x86, mmiotrace: fix range test
tracing: fix ref count in splice pages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: show number of core_siblings instead of thread_siblings in /proc/cpuinfo
amd-iommu: fix iommu flag masks
x86: initialize io_bitmap_base on 32bit
x86: gettimeofday() vDSO: fix segfault when tv == NULL
|
|
- drivers/xen/events.c did not compile
- xen_setup_hook caused a modpost section warning
- the use of u64 (instead of unsigned long long) together with a %llu
in drivers/xen/balloon.c caused a compiler warning
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Fix setting of oprofile cpu type
powerpc: Update MPC5xxx and Xilinx Virtex maintainer entries
powerpc adjust oprofile_cpu_type version 3
|
|
|
|
|
|
The i.MX31 ARM11 core is not a v6K core. Disable this option as it
is incompatible with non v6K cores.
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
Before this patch I got the following line in my dmesg:
[ 0.000000] BUG: mapping for 0xd4000000 at 0xeb000000 overlaps vmalloc space
VMALLOC_END is 0xf4000000 and there are the following other mappings
defined for mx27ads:
(0xa0500000,+0x00001000) maps to 0xffff0000
(0x10000000,+0x00100000) maps to 0xf4000000
(0x80000000,+0x00100000) maps to 0xf4100000
(0xd8000000,+0x00100000) maps to 0xf4200000
So map PBC to 0xf4300000.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
On i.MX31 I sometimes get spurious interrupts. There is no need
to crash the whole system when this happens. Instead, silently
ignore it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
We want to have a mx31_defconfig file that builds a kernel that is able
to boot on all support mx31 systems and thus also can be better tested
by automatic build scripts. For these reasons, this config file is not
needed anymore.
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
All i.MX platforms support <linux/clk.h> calls and should select HAVE_CLK.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
