| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit 320c90be7ba1c371e882edff57272a89b213d136.
Christoph Hellwig <hch@infradead.org> commented:
This one shouldn't go in - Geert sent it a bit prematurely, as Lustre
shouldn't use it just to reimplement core VM functionality (which it
shouldn't use either, but that's a separate story).
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
OMAP3 PM core requires IVA2 bootmode to be set to idle during init. Currently,
a direct register write is used for this. Add a new ctrl API for this purpose
instead.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
|
|
OMAP3 PM code for off-mode currently saves the scratchpad contents for CM
registers within OMAP control module driver. However, as we are separating
CM code into its own driver, this must be moved also. This patch adds a
new API for saving the CM scratchpad contents and uses this from the high
level scratchpad save function.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
|
|
McBSP driver require special hacks to enable/disable the autoidle feature
for its interface clock for the proper function of the sidetone hardware.
Currently the driver just writes CM registers directly, which should be
avoided. Thus, changed the driver to use the new deny/allow_autoidle
clock API calls.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
|
|
Some drivers require direct access to the autoidle functionality of the
interface clocks. Added clock APIs for these, so that the drivers do not
need to access CM registers directly.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
|
|
Users of the CM funtionality should not access the CM registers directly
by themselves. Thus, added new CM driver APIs for the OMAP2 specific
functionalities which support the existing direct register accesses, and
changed the platform code to use these. This is done in preparation
for moving the CM code into its own individual driver.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
|
|
BookE version of user_disable_single_step() clears DBCR0_IC for the
instruction completion debug, but did not also clear DBCR0_BT for the
branch taken exception. This behavior was lost by the 2/2010 patch.
Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
KVM need this function when switching from vcpu to user-space
thread. My subsequent patch will use this function.
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
This way we can use same data type struct with KVM and
also help in using other debug related function.
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Acked-by: Michael Neuling <mikey@neuling.org>
[scottwood@freescale.com: removed obvious debug_reg comment]
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
Use DEFINE_PER_CPU to allocate thread_info statically instead of kmalloc().
This can avoid introducing more memory check codes.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
[scottwood@freescale.com: wrapped long line]
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
Extend the list of power gates found on Tegra114. Note that there are
now holes in the list, so perhaps a simple array is no longer the best
data structure to represent it.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
There's no need to modify these at runtime, it is static data and never
needs to change.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
Instead of duplicating powergate defines, reuse the ones from the
include/linux/tegra-powergate.h header file.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
The LP1 suspend procedure is the same with Tegra30 and Tegra114. Just
need to update the difference of the register address, then we can
continue to share the code.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
This patch re-calculates the LP1 data of tegra30/114_sdram_pad_address
to base on its label not rely on others. This can make easier to
maintain if some other Tegra chips keep re-using these codes in the
future. And change the name of tegra30_sdram_pad_save to
tegra_sdram_pad_save to make it more common to other chips.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
The CPUIdle function of Tegra124 is identical to Tegra114, so we share
the same driver with Tegra114.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
Because the CPU0 was the first up and the last down core when cluster
power up/down or platform suspend. So only CPU0 needs the rest of the
functions to reset flow controller and re-enable SCU and L2. We also
move the L2 init function for Cortex-A15 to there. The secondery CPU
can just call cpu_resume.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
The procedure of CPU hotplug for Tegra124 is same with Tegra114. We
re-use the same function with it.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
The PMC HW is not identical to the existing Tegra SoC. Hence add to it.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
Add Tegra124 SoC support that base on CortexA15MP Core. And enable the
SMP function that can re-use the same procedure with Tegra114.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
Various fuses on Tegra include information that's unique to an individual
chip, or a subset of chips. Call add_device_randomness() with this data
to perturb the initial state of the random pool.
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Two fixlets:
- fix a (rare-config) build bug
- fix a next-gen SGI/UV hw/firmware enumeration bug"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Update UV3 hub revision ID
x86/microcode: Correct Kconfig dependencies
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
From Tony Lindgren:
Changes needed to drop legacy booting support for some
omap3 boards.
Note that that these are based on a merge of the
following for the dependencies:
- v3.12-rc5 for fixes to pinctrl mask
- omap-for-v3.13/dt-signed to avoid pointless merge conflicts
- omap-for-v3.13/quirk-signed for legacy pdata handling
* tag 'omap-for-v3.13/board-removal-signed-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (125 commits)
ARM: OMAP2+: remove legacy support for IGEP boards
ARM: OMAP2+: Remove legacy support for zoom platforms
ARM: OMAP2+: Remove legacy booting support for omap3 EVM
ARM: OMAP2: delete board-rm680
ARM: dts: add minimal DT support for Nokia N950 & N9 phones
ARM: dts: Add basic support for zoom3
ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM)
ARM: dts: Add common support for omap3-evm
ARM: dts: Shared file for omap GPMC connected smsc911x
+Linux 3.12-rc5
Signed-off-by: Kevin Hilman <khilman@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into devel-stable
This series extends the existing ARM v2p runtime patching for 64 bit.
Needed for LPAE machines which have physical memory beyond 4GB.
|
|
corrected
Commit f8e7ba66 (ARM: OMAP1: fix incorrect placement of
__initdata tag) fixed things but we started seeing section
warnings. Looks like I missed those in my automatic
build scripts:
Section mismatch in reference from the variable omap7xx_gpio6 to the (unknown reference) .init.data:(unknown)
Section mismatch in reference from the variable omap7xx_gpio6 to the (unknown reference) .init.data:(unknown)
Section mismatch in reference from the variable omap7xx_gpio5 to the (unknown reference) .init.data:(unknown)
...
Fix the issue by removing __initdata for the resources.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
|
|
Device Tree support for IGEP boards in mainline is almost
finished. The only remaining bits are support for the
Marvell SD8686 wifi + BT and TFP410 DVI chips.
Adding support for these should be straightforward so let's
not block OMAP3 moving to Device Tree only boot and remove
the board file for IGEP boards.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We now have pretty decent device tree based support for
zoom platforms. It's not complete, but basics work for
me so adding more features should be quite trivial.
Looks like also 3630 sdp is zoom based, and looking
at it's board file should also be trivial to support
with the device tree based booting.
Patches are welcome if people are still using these.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We now have pretty decent support with the device tree
based booting. Patches to add more features are welcome.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Delete board file for Nokia RM-680/RM-696 (N950/N9). DT-based booting
should be used for further development on this HW.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Add minimal DT support for Nokia N950 & N9 phones. The same functionality
that is provided by the current board file should work: serial console,
USB, OneNAND and MMC.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
I've tested serial, MMC, smsc911x and wl12xx on zoom3. As my
omap is an early ES revision, I have not been able to test
off-idle on this one. But anyways, I'd say we have enough
device tree support for the zoom to be able to drop the
board-zoom files. Patches are welcome to add further features
to this .dts file.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The imx6sl iomuxc syscon is compatible to imx6q, so let's add
compatible string 'fsl,imx6q-iomuxc-gpr' for imx6sl iomuxc syscon node.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
From Nicolas Ferre:
First DT series for 3.13
- addition of sound for at91sam9n12
- a little fix for MMC vs. SPI on at91sam9g20ek
* tag 'at91-dt' of git://github.com/at91linux/linux-at91:
ARM: at91: remove pinctrl conflict between mmc and SPI for at91sam9g20ek
ARM: at91: add sound support on at91sam9n12ek board
ARM: at91: enable ssc on at91sam9n12ek board
ARM: at91: enable wm8904 on at91sam9n12ek board
ARM: at91: add ssc dma parameter for at91sam9n12
ARM: at91: add at91sam9n12 ssc clock in look up table
Signed-off-by: Kevin Hilman <khilman@linaro.org>
|
|
next/cleanup
From Nicolas Ferre:
First cleanup series for 3.13
- a little non-urgent fix
- addition of DT files to MAINTAINERS
- more important, the splitting of .dtsi files
that allows to precisely choose the peripherals
that are present for a particular SoC.
It is useful for upcoming move to common cloks.
* tag 'at91-cleanup' of git://github.com/at91linux/linux-at91:
MAINTAINERS: Add patterns for DTS files for AT91
ARM: at91: remove init_machine() as default is suitable
ARM: at91/dt: split sama5d3 peripheral definitions
ARM: at91/dt: split sam9x5 peripheral definitions
ARM: at91: cam60: fix incorrect placement of __initdata tag
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
From Tony Lindgren:
Changes needed for am43xx for the hwmod data.
This will be the last new set of hwmod data for any SoC
as future SoCs will use a driver and device tree based
approach. But before that can be dealt with, we need to
first sort out the pending driver/clk issues.
Queued by Paul Walmsley <paul@pwsan.com>:
Add hwmod and PRCM data for the TI AM43xx family of SoCs.
Under normal circumstances, these patches would not be merged.
The hwmod and PRCM data should be moved out either to DT data or
to drivers/. Also, the current implementation trades off lines
of diff by dynamically rewriting static data at runtime, which is
a bad practice - it causes future maintenance headaches.
However, after speaking with my upstream, it sounds like it's
better to merge these patches in their current state, due to long
term considerations.
Basic test logs are here:
http://www.pwsan.com/omap/testlogs/am43xx_support_v3.13/20131015213706/
Due to the lack of an AM43xx board and any available public
documentation, it's impossible for me to review or test that
platform in any meaningful way. But at least the tests above
verify that the patches don't affect existing platforms -
particularly AM33xx.
* tag 'omap-for-v3.13/am43xx-hwmod-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2: hwmod: Add qspi data for am437x.
ARM: OMAP2+: hwmod: Add USB hwmod data for AM437x.
ARM: OMAP2+: AM43x PRCM init
ARM: OMAP2+: AM43x: PRCM kbuild
ARM: OMAP2+: hwmod: AM43x operations
ARM: OMAP2+: hwmod: AM43x support
ARM: OMAP2+: CM: AM43x clockdomain data
ARM: OMAP2+: PM: AM43x powerdomain data
ARM: OMAP2+: PRCM: AM43x definitions
ARM: OMAP2+: hwmod: AM335x: remove static register offs
ARM: OMAP2+: hwmod: AM335x: runtime register update
ARM: OMAP2+: hwmod: AM335x/AM43x: move common data
ARM: OMAP2+: CM: cm_inst offset s16->u16
Signed-off-by: Kevin Hilman <khilman@linaro.org>
|
|
These MMC and SPI buses can't be configured at the same time because they
share the same traces on the EK board.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes-non-critical
From Kukjin Kim:
Fixes for v3.12
- correct typo 'samsung,pin-drv'
- correct typo 'earlyprintk'
- cpufreq regulator lookup for exynos4210-origen and trats
- fix PL330 MDMA1 address for universal c210 board
* tag 'samsung-fixes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: fix PL330 MDMA1 address in DT for Universal C210 board
ARM: dts: Work around lack of cpufreq regulator lookup for exynos4210-origen and trats boards
ARM: dts: Fix typo earlyprintk in exynos5440-sd5v1 and ssdk5440 boards
ARM: dts: Correct typo in use of samsung,pin-drv for exynos5250
Signed-off-by: Kevin Hilman <khilman@linaro.org>
|
|
From Heiko Stübner:
Support for the RK3188 SoC, basic RK3188 based Radxa Rock board
and RK3066a based BQ Curie2 tablet.
* rockchip/boards:
ARM: rockchip: add support for rk3188 and Radxa Rock board
ARM: rockchip: add dts for bqcurie2 tablet
ARM: rockchip: enable arm-global-timer
ARM: rockchip: move shared dt properties to common source file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes-non-critical
From Heiko Stübner:
Romoval of obsolete (never used) dt properties
and fix for the selection of the TWD.
* tag 'v3.13-rockchip-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: rockchip: remove obsolete rockchip,config properties
ARM: rockchip: fix wrong use of non-existent CONFIG_LOCAL_TIMERS
|
|
This adds the SSP and SPI blocks to the device tree and makes
them active. Only this way can their clocks be properly gated
off at boot.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The PCLK for I2C4 is controlled by bit 10 in the PCKEN registers
while the KCLK is controlled by bit 9 on the KCKEN, it's
one of these odd assymetric things. Correct the PCLK bit to 10.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The clock assignment in the device tree for GPIO blocks 6
and 7 was incorrect, indicating this was managed by bit 1 on
PRCC 2 while it was in fact bit 11 on PRCC 2.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The clock assignment in the device tree for GPIO block 8 was
incorrect, indicating this was managed by bit 1 on PRCC 6
while it was in fact bit 1 on PRCC 5.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
enable the spi nor for imx6sl-evk boards.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
add a pinctrl for ECSPI1. This pinctrl can be used in the imx6sl-evk board.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
The pwm-node is missing its #pwm-cells property. The pwm-framework will
complain about this.
Add the missing property.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
Support transparent huge pages in KVM/ARM and KVM/ARM64. The
transparent_hugepage_adjust is not very pretty, but this is also how
it's solved on x86 and seems to be simply an artifact on how THPs
behave. This should eventually be shared across architectures if
possible, but that can always be changed down the road.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
|
|
Support huge pages in KVM/ARM and KVM/ARM64. The pud_huge checking on
the unmap path may feel a bit silly as the pud_huge check is always
defined to false, but the compiler should be smart about this.
Note: This deals only with VMAs marked as huge which are allocated by
users through hugetlbfs only. Transparent huge pages can only be
detected by looking at the underlying pages (or the page tables
themselves) and this patch so far simply maps these on a page-by-page
level in the Stage-2 page tables.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
|
|
As Intel rolling out more SoC's after Moorestown, we need to
re-structure the code in a way that is backward compatible and easy to
expand. This patch implements a flexible way to support multiple boards
and devices.
This patch does not add any new functional support. It just refactors
the existing code to increase the modularity and decrease the code
duplication for supporting multiple soc's and boards.
Currently intel-mid.c has both board and soc related code in one file.
This patch moves the board related code to new files and let linker
script to create SFI devite table following this:
1. Move the SFI device specific code to
arch/x86/platform/intel-mid/device-libs/platform_<device>.*
A new device file is added for every supported device. This code will
get conditionally compiled by using corresponding device driver
CONFIG option.
2. Move the device_ids location to .x86_intel_mid_dev.init section by
using new sfi_device() macro.
This patch was based on previous code from Sathyanarayanan Kuppuswamy.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: http://lkml.kernel.org/r/1382049336-21316-13-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
