| Age | Commit message (Collapse) | Author |
|---|
|
The vpe_id field of struct cpuinfo_mips is only present when one of
CONFIG_MIPS_MT_{SMP,SMTC} is enabled. That means that any code accessing
which may compile without MT is currently forced to use an #ifdef.
Instead this patch provides an accessor macro, #ifdef'd appropriately
to prevent further #ifdef's elsewhere.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6646/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The packet hash can be considered a property of the packet, not just
on RX path.
This patch changes name of rxhash and l4_rxhash skbuff fields to be
hash and l4_hash respectively. This includes changing uses of the
field in the code which don't call the access functions.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ARM EFI boot stub doesn't need to care about the efi_early
infrastructure that x86 requires in order to do mixed mode thunking. So
wrap everything up in an efi_call_early() macro.
This allows x86 to do the necessary indirection jumps to call whatever
firmware interface is necessary (native or mixed mode), but also allows
the ARM folks to mask the fact that they don't support relocation in the
boot stub and need to pass 'sys_table_arg' to every function.
[ hpa: there are no object code changes from this patch ]
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/20140326091011.GB2958@console-pimps.org
Cc: Roy Franz <roy.franz@linaro.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
I noticed KVM is broken when KVM in-kernel XICS emulation
(CONFIG_KVM_XICS) is disabled.
The problem was introduced in 48eaef05 (KVM: PPC: Book3S HV: use
xics_wake_cpu only when defined). It used CONFIG_KVM_XICS to wrap
xics_wake_cpu, where CONFIG_PPC_ICP_NATIVE should have been
used.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Scott Wood <scottwood@freescale.com>
|
|
This introduces the H_GET_TCE hypervisor call, which is basically the
reverse of H_PUT_TCE, as defined in the Power Architecture Platform
Requirements (PAPR).
The hcall H_GET_TCE is required by the kdump kernel, which uses it to
retrieve TCEs set up by the previous (panicked) kernel.
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
When the guest does an MMIO write which is handled successfully by an
ioeventfd, ioeventfd_write() returns 0 (success) and
kvmppc_handle_store() returns EMULATE_DONE. Then
kvmppc_emulate_mmio() converts EMULATE_DONE to RESUME_GUEST_NV and
this causes an exit from the loop in kvmppc_vcpu_run_hv(), causing an
exit back to userspace with a bogus exit reason code, typically
causing userspace (e.g. qemu) to crash with a message about an unknown
exit code.
This adds handling of RESUME_GUEST_NV in kvmppc_vcpu_run_hv() in order
to fix that. For generality, we define a helper to check for either
of the return-to-guest codes we use, RESUME_GUEST and RESUME_GUEST_NV,
to make it easy to check for either and provide one place to update if
any other return-to-guest code gets defined in future.
Since it only affects Book3S HV for now, the helper is added to
the kvm_book3s.h header file.
We use the helper in two places in kvmppc_run_core() as well for
future-proofing, though we don't see RESUME_GUEST_NV in either place
at present.
[paulus@samba.org - combined 4 patches into one, rewrote description]
Suggested-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
* Remove one liner IRQ ACK accessor, it was coming in the way of readability.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
So no point keeping it weak
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
The symbol is an orphan, get rid of it.
Fixes: 7d0857a54aed ("ARC: [SMP] Disallow RTSC")
Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
With commit 9df62f054406 "arch: use ASM_NL instead of ';'" the generic
macros can handle the arch specific newline quirk. Hence we can get rid
of ARC asm macros and use the "C" style macros.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Currently ARC only supports embedded initrd. This patch enables
external ones too.
[vgupta: Changed from "rt_start"=start/"rd_size"=sz to unified "initrd"=start,sz]
Signed-off-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Conflicts:
Documentation/devicetree/bindings/net/micrel-ks8851.txt
net/core/netpoll.c
The net/core/netpoll.c conflict is a bug fix in 'net' happening
to code which is completely removed in 'net-next'.
In micrel-ks8851.txt we simply have overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
vdso32/vclock_gettime.o was confusing kbuild.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Stefani Seibold <stefani@seibold.net>
Link: http://lkml.kernel.org/r/d741449340642213744dd659471a35bb970a0c4c.1395789923.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
This patch adds DTS entries for NMI controller as child of GIC.
Signed-off-by: Carlo Caione <carlo@caione.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@googlegroups.com
Cc: mark.rutland@arm.com
Cc: hdegoede@redhat.com
Acked-by: maxime.ripard@free-electrons.com
Link: http://lkml.kernel.org/r/1395256879-8475-3-git-send-email-carlo@caione.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
'asoc/fix/cs42l73', 'asoc/fix/rcar', 'asoc/fix/spear' and 'asoc/fix/tegra' into asoc-linus
|
|
The .discard/.discard.* sections are used to generate intermediate
results for the assembler (effectively "test assembly".) The output
is waste and should not be retained.
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-psizrnant8x3nrhbgvq2vekr@git.kernel.org
|
|
Update SATA AHCI support to make use of the new ahci_da850 host
driver (instead of the generic ahci_platform one) and remove
deprecated ahci_platform_data code.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
destroy_timer_on_stack() is hardly the right thing for a delayed
work. We leak a tracking object for the work itself when DEBUG_OBJECTS
is enabled.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20140323141940.034005322@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next
3 fixes
- memory leak on certain SIGP conditions
- wrong size for idle bitmap (always too big)
- clear local interrupts on initial CPU reset
1 performance improvement
- improve performance with many guests on certain workloads
|
|
Empty list of local interrupts when vcpu goes through initial reset
to provide a clean state
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
When kvm_get_vcpu() returned NULL for the destination CPU in
__sigp_emergency() or __sigp_external_call(), the memory for the
"inti" structure was not released anymore. This patch fixes this
issue by moving the check for !dst_vcpu before the kzalloc() call.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
We need BITS_TO_LONGS, not sizeof(long) to calculate
the correct size.
idle_mask is a bitmask, each bit representing the state
of a cpu. The desired outcome is an array of unsigned long
fields that can fit KVM_MAX_VCPUS bits. We should not use
sizeof(long) which returnes the size in bytes, but BITS_TO_LONGS
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
We allocate a page for the 2k sca, so lets use the space to improve
hit rate of some internal cpu caches. No need to change the freeing
of the page, as this will shift away the page offset bits anyway.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
|
|
There is really no need to page align sha1_transform_avx2. The default
alignment is just fine. This is not the hot code but only the entry
point, after all.
Cc: Chandramouli Narayanan <mouli@linux.intel.com>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-by: H. Peter Anvin <hpa@linux.intel.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The AVX2 implementation might waste up to a page of stack memory because
of a wrong alignment calculation. This will, in the worst case, increase
the stack usage of sha1_transform_avx2() alone to 5.4 kB -- way to big
for a kernel function. Even worse, it might also allocate *less* bytes
than needed if the stack pointer is already aligned bacause in that case
the 'sub %rbx, %rsp' is effectively moving the stack pointer upwards,
not downwards.
Fix those issues by changing and simplifying the alignment calculation
to use a 32 byte alignment, the alignment really needed.
Cc: Chandramouli Narayanan <mouli@linux.intel.com>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-by: H. Peter Anvin <hpa@linux.intel.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit 7c1da8d0d0 "crypto: sha - SHA1 transform x86_64 AVX2"
accidentally disabled the AVX variant by making the avx_usable() test
not only fail in case the CPU doesn't support AVX or OSXSAVE but also
if it doesn't support AVX2.
Fix that regression by splitting up the AVX/AVX2 test into two
functions. Also test for the BMI1 extension in the avx2_usable() test
as the AVX2 implementation not only makes use of BMI2 but also BMI1
instructions.
Cc: Chandramouli Narayanan <mouli@linux.intel.com>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-by: H. Peter Anvin <hpa@linux.intel.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This reverts commit a9c8e4beeeb64c22b84c803747487857fe424b68.
PTEs in Xen PV guests must contain machine addresses if _PAGE_PRESENT
is set and pseudo-physical addresses is _PAGE_PRESENT is clear.
This is because during a domain save/restore (migration) the page
table entries are "canonicalised" and uncanonicalised". i.e., MFNs are
converted to PFNs during domain save so that on a restore the page
table entries may be rewritten with the new MFNs on the destination.
This canonicalisation is only done for PTEs that are present.
This change resulted in writing PTEs with MFNs if _PAGE_PROTNONE (or
_PAGE_NUMA) was set but _PAGE_PRESENT was clear. These PTEs would be
migrated as-is which would result in unexpected behaviour in the
destination domain. Either a) the MFN would be translated to the
wrong PFN/page; b) setting the _PAGE_PRESENT bit would clear the PTE
because the MFN is no longer owned by the domain; or c) the present
bit would not get set.
Symptoms include "Bad page" reports when munmapping after migrating a
domain.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <stable@vger.kernel.org> [3.12+]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- revert parts of the latest patch regarding font selection with STICON
console
- wire up the utimes() syscall for parisc
- remove the unused parisc tmpalias code and unnecessary arch*relax
defines
* 'parisc-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: locks: remove redundant arch_*_relax operations
parisc: wire up sys_utimes
parisc: Remove unused CONFIG_PARISC_TMPALIAS code
partly revert commit 8a10bc9: parisc/sti_console: prefer Linux fonts over built-in ROM fonts
|
|
Pull sparc fixes from David Miller:
1) Do serial locking in a way that makes things clear that these are
IRQ spinlocks.
2) Conversion to generic idle loop broke first generation Niagara
machines, need to have %pil interrupts enabled during cpu yield
hypervisor call.
3) Do not use magic constants for iterations over tsb tables, from Doug
Wilson.
4) Fix erroneous truncation of 64-bit system call return values to
32-bit. From Dave Kleikamp.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Make sure %pil interrupts are enabled during hypervisor yield.
sparc64:tsb.c:use array size macro rather than number
sparc64: don't treat 64-bit syscall return codes as 32-bit
sparc: serial: Clean up the locking for -rt
|
|
Replace dev_kfree_skb with dev_consume_skb_any in uml_net_start_xmit
as it can be called in hard irq and other contexts.
dev_consume_skb_any is used as uml_net_start_xmit typically
consumes (not drops) packets.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
In arch_cpu_idle() we must enable %pil based interrupts before
potentially invoking the hypervisor cpu yield call.
As per the Hypervisor API documentation for cpu_yield:
Interrupts which are blocked by some mechanism other that
pstate.ie (for example %pil) are not guaranteed to cause
a return from this service.
It seems that only first generation Niagara chips are hit by this
bug. My best guess is that later chips implement this in hardware
and wake up anyways from %pil events, whereas in first generation
chips the yield is implemented completely in hypervisor code and
requires %pil to be enabled in order to wake properly from this
call.
Fixes: 87fa05aeb3a5 ("sparc: Use generic idle loop")
Reported-by: Fabio M. Di Nitto <fabbione@fabbione.net>
Reported-by: Jan Engelhardt <jengelh@inai.de>
Tested-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There was a potential lock ordering problem with the module kASLR patch
("x86, kaslr: randomize module base load address"). This patch removes
the usage of the module_mutex and creates a new mutex to protect the
module base address offset value.
Chain exists of:
text_mutex --> kprobe_insn_slots.mutex --> module_mutex
[ 0.515561] Possible unsafe locking scenario:
[ 0.515561]
[ 0.515561] CPU0 CPU1
[ 0.515561] ---- ----
[ 0.515561] lock(module_mutex);
[ 0.515561] lock(kprobe_insn_slots.mutex);
[ 0.515561] lock(module_mutex);
[ 0.515561] lock(text_mutex);
[ 0.515561]
[ 0.515561] *** DEADLOCK ***
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andy Honig <ahonig@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
The size of the reserved memory for a 32 bit vdso must be the size of the
32 bit vDSO in pages + HPET page + VVAR page.
One page is not enough for this. Grrrr.... silly copy and paste bug,
was right in previous patch.
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/1395592694-20571-1-git-send-email-stefani@seibold.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
SND_SOC_DAIFMT_CBx_CFx means "codec" side master/slave mode.
Then, rcar will be master mode if it was SND_SOC_DAIFMT_CBS_CFS.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
|
|
Since this macro is identical to pgprot_writecombine() and is only used
in a single place, remove it completely to avoid confusion. On ARMv7+
processors, the coherent DMA mapping must be Normal NonCacheable (a.k.a.
writecombine) to avoid mismatched hardware attribute aliases (with the
kernel linear mapping as Normal Cacheable).
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
DMA_ATTR_WRITE_COMBINE is currently ignored. Set the pgprot
appropriately for non coherent opperations.
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The current dma_ops do not specify an mmap function so maping
falls back to the default implementation. There are at least
two issues with using the default implementation:
1) The pgprot is always pgprot_noncached (strongly ordered)
memory even with coherent operations
2) dma_common_mmap calls virt_to_page on the remapped non-coherent
address which leads to invalid memory being mapped.
Fix both these issue by implementing a custom mmap function which
correctly accounts for remapped addresses and sets vm_pg_prot
appropriately.
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
[catalin.marinas@arm.com: replaced "arm64_" with "__" prefix for consistency]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Freescale updates from Scott. Mostly support for critical
and machine check exceptions on 64-bit BookE, some new
PCI suspend/resume work and misc bits.
|
|
While checking powersaving mode in machine check handler at 0x200, we
clobber CFAR register. Fix it by saving and restoring it during beq/bgt.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
I noticed this when testing setarch. No, we don't magically
support a big endian userspace on a little endian kernel.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable@vger.kernel.org # v3.10+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
The ppc_rtas() syscall allows userspace to interact directly with RTAS.
For the moment, it assumes every thing is big endian and returns either
EINVAL or EFAULT when called in a little endian environment.
As suggested by Benjamin, to avoid bugs when userspace wants to pass
a non 32 bit value to RTAS, it is far better to stick with a simple
rationale: ppc_rtas() should be called with a big endian rtas_args
structure.
With this patch, it is now up to userspace to forge big endian arguments,
as expected by RTAS.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
Our netfilter options are stale and important things like masquerading
are no longer enabled. Instead of trying to keep up with any updates,
set CONFIG_NETFILTER_ADVANCED=n on ppc64* and pseries* defconfigs.
This enables the most common netfilter modules for us.
While here, enable the network bridge module which is heavily used in
KVM setups.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
We also set it to be enabled always. This helps in wider testing
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
We have generic code like the one in get_futex_key that assume that
a local_irq_disable prevents a parallel THP split. Support that by
adding a dummy smp call function after setting _PAGE_SPLITTING. Code
paths like get_user_pages_fast still need to check for _PAGE_SPLITTING
after disabling IRQ which indicate that a parallel THP splitting is
ongoing. Now if they don't find _PAGE_SPLITTING set, then we can be
sure that parallel split will now block in pmdp_splitting flush
until we enables IRQ
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
The facility unavailable exception can be triggered from userspace by
accessing PMU registers when EBB is not enabled. This causes the
included pr_err() to run, hence spamming the kernel log buffer.
This avoids this by rate limiting these messages.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
Currently we reject events which have the L3 bank == 1, such as
0x000084918F, because the cache field is non-zero.
However that is incorrect, because although the bank is non-zero, the
value we would write into MMCRC is zero, and so we can count the event.
So fix the check to ignore the bank selector when checking whether the
cache selector is non-zero.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
The commit adds a Kconfig option which allows the hv_gpci and hv_24x7
PMUs, added in the preceeding commits, to be built.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
This provides a basic interface between hv_24x7 and perf. Similar to
the one provided for gpci, it lacks transaction support and does not
list any events.
Example usage via perf tool:
perf stat -e 'hv_24x7/domain=2,offset=8,starting_index=0,lpar=0xffffffff/' -r 0 -C 0 -x ' ' sleep 0.1
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
