summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2008-12-22sh: Drop the special qemu defconfig.Paul Mundt
QEMU can now use rts7751r2dplus_defconfig directly, there is no more need for a neutered defconfig. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Delete unnecessary mov in the interrupt exception entry point.Aoi Shinkai
The INTEVT read at interrupt exception entry is uneccessary, as the read is deferred until we are ready to enter do_IRQ(). The kgdb nmi path still requires it, so move it there. Signed-off-by: Aoi Shinkai <shinkoi2005@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Fix an off-by-1 check in __mutex_fastpath_unlock().Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Update rsk701_defconfig to reflect mach-rsk changes.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Enable leds-gpio in rsk7203 defconfig.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Consolidate rsk7203/7201 in to a new mach-rsk.Paul Mundt
RSK+ platforms have quite a few characteristics in common, so roll them together in to a shiny new RSK mach-type. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Provide ftrace_make_call()/ftrace_make_nop().Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Disable -Werror for arch/sh/oprofile/.Paul Mundt
drivers/oprofile/ objects have proven to be problematic in this regard, so simply disable -Werror for now. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add plain udivsi3 (not _i4*) for gcc-4.1 and lower.Takashi YOSHII
We chan't share code for udivsi3 and udivsi3_i4, because they have a different clobber list. Copy udivsi3 from gcc-4.1.2. As shown in arch/sh/lib/udivsi3.S (and -Os.S), .global __udivsi3_i4i .global __udivsi3_i4 .global __udivsi3 __udivsi3_i4i: ... Three symbols are sharing one code, which is actually udivsi3_i4i. But, this results unwanted code with gcc 4.1. In gcc, these three are treated as pseudo instructions that have their own clobber list apart from the usual calling convention. According to sh's machine description. The clobber list is as follows: - udivsi3_i4i : t,r1,pr,mach,macl - udivsi3_i4 : t,r0,r1,r4,r5,pr,dr0,dr2,dr4 - udivsi3 : t,r4,pr The caller of udivsi3 will be left with a broken r1 and mac*. gcc-4.1.x and older(at least to 3.4) generate udivsi3. ST's gcc-4.1.1 seems to be OK because it has _i4i. Signed-off-by: Takashi YOSHII <yoshii.takashi@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22Fix incorrect use of loose in c-checksum.cNick Andrew
Fix incorrect use of loose in c-checksum.c It should be 'lose', not 'loose'. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Fix up the SH-4A mutex fastpath semantics.Paul Mundt
This fixes up the __mutex_fastpath_xxx() routines to match the semantics noted in the comment. Previously these were looping rather than doing a single-pass, which is counter-intuitive, as the slow path takes care of the looping for us in the event of contention. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: allow CONFIG_CPU_IDLEMagnus Damm
Allow users to select CONFIG_CPU_IDLE regardless of processor type or board. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: allow CONFIG_PMMagnus Damm
Allow users to select CONFIG_PM regardless of processor type or board. Suspend and hibernation are only allowed on supported platforms. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: move the hp6xx pm codeMagnus Damm
Move the not-so-generic pm code from arch/sh/kernel/pm.c to the platform directory together with the rest of the hp6xx pm code. This is done to let non-hp6xx platforms enable CONFIG_PM. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: update se7343 defconfigMagnus Damm
Update the se7343 defconfig with: - use 33MHz PCLK - increase max number of SCIFs - add serial console configuration to compiled-in kernel command line - add 8250 serial port support - add sh-mobile-i2c driver - add uio driver to export VEU and VPU - add usb support and isp1161 host controller - add dm9601 ethernet-over-usb support - remove smc91x support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: remove ioport cruft and smc91x from se7343Magnus Damm
Remove out-of-date se7343 ioport code including some old support for unknown-ne2000-pcmcia-card, cf-over-pcmcia and a mysterical smc91x that once must have been on a special daughterboard. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: add isp1161 usb host device to se7343Magnus Damm
Add isp1161 platform data to get usb host working on se7343. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: add st16c2550 devices to se7343Magnus Damm
Add 8250 platform data to setup the ST16C2550C chip on se7343. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: fix number of interrupts on se7343Magnus Damm
Fix to make sure that the on-board interrupt sources are included in the interrupt count on se7343. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh7343 scif configuration updateMagnus Damm
Fix interrupt values for the first sh7343 SCIF port and update the configuration to include the remaining 3 ones. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: propagate r_clkMagnus Damm
Make sure the 32 KHz r_clk rate gets propagated correctly. Without this fix the clocks for RTC, CMT, KEYSC and RWDT are stuck at 0 Hz. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: RSK+ 7201 board support.Peter Griffin
This patch adds support for the RTE RSK+ 7201 board. Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add support for SH7201 CPU subtype.Peter Griffin
This patch adds support for the SH-2A FPU based SH7201 processor subtype. Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Switch HD64461 from hw_interrupt_type to irq_chipMatt Fleming
Use struct irq_chip for the interrupt handler for the HD64461. Also convert some in{b,w} and out{b,w} calls to the equivalent __raw_* calls. Include <linux/io.h> and not <asm/io.h> to stop checkpatch.pl complaining. This change should now allow machines with HD64461 to define GENERIC_HARDIRQS_NO__DO_IRQ. Acked-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: pci-sh7780: fix pci memory address maskYoshihiro Shimoda
Fix the problem that cannot work a PCI device when system memory size is 256Mbyte in 29bit address mode. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Provide a dyn_arch_ftrace struct definition.Paul Mundt
Needed for dynamic ftrace API changes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Split out the idle loop for reuse between _32/_64 variants.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Consolidate cpu_relax()/cpu_sleep() definitions across _32/_64.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: do not latency trace idle.Paul Mundt
Description snipped from Steven Rostedt's PPC patch: When idle is called, interrupts are blocked, but the idle function will still wake up on an interrupt. The problem is that the interrupt disabled latency tracer will take this call to idle as a latency. This patch disables the latency tracing when going into idle. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Tidy up backtrace formatting with kallsyms disabled.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add a simple code dumper for SUPERH32 show_regs().Paul Mundt
This implements a simple show_code() that is in turn plugged in to show_regs() to provide minimal code dumping at the end of the trace. Built on top of a simple instruction disassembler derived from the binutils opcode table. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add a few more branch types to the branch emulator.Paul Mundt
This plugs in some extra encodings for matching more bsr/bsrf/jsr branches. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Re-add support for best fit ISA tuning if none is available.Paul Mundt
This was removed in the libgcc integration, but there are still some compilers that need this. We also relax the rules on the ISA tuning in the cases where there are no matches for the CPU tuning and adopt the -any default, which matches the intent of the isa-y target list. This compensates for mismatches where binutils supports a wide array of targets whilst the compiler is much more restricted. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: More movmem alias symbol exports for older compilers.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Provide optimized unaligned loads on SH-4A.Paul Mundt
This adds support for unaligned loads on SH-4A, using the SH-4A's neutered movua.l instruction. As movua.l is r0-inspired, stores are still handled through the packed struct. Based on asm-generic/unaligned.h by Harvey Harrison. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: P4 ioremap pass-throughMagnus Damm
This patch adds a pass-through case when ioremapping P4 addresses. Addresses passed to ioremap() should be physical addresses, so the best option is usually to convert the virtual address to a physical address before calling ioremap. This will give you a virtual address in P2 which matches the physical address and this works well for most internal hardware blocks on the SuperH architecture. However, some hardware blocks must be accessed through P4. Converting the P4 address to a physical and then back to a P2 does not work. One example of this is the sh7722 TMU block, it must be accessed through P4. Without this patch P4 addresses will be mapped using PTEs which requires the page allocator to be up and running. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add SH-4A optimized fastpath mutex implementation.Michael Trimarchi
Add fast mutex path implementation for the SH4A architecture Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: add SH DMAC burst mode constantSteve Glendinning
The SH7709 datasheet defines bit 5 as set for burst mode, clear for cycle-steal mode. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: fix DMAOR register access on SH7709Steve Glendinning
sh7709 hardware manual says DMAOR is 16 bits long on this platform. Tested and working with a modified smsc911x ethernet driver (sh-dma support patch for this driver is coming soon). Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add platform-specific constants for SH7709Steve Glendinning
I'm using these constants in support of an in-house development board, and thought they may be useful to other users of SH7709. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Provide optimized non-atomic bitops for SH-2A.Paul Mundt
This ties in the new SH-2A 32-bit non-atomic bitops. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add -m4al tuning for SH4AL-DSP.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add exports for __udivsi3/__sdivsi3 and the _i4 versions.Paul Mundt
Needed by older compilers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Convert to generic bitops for IRQ-toggling implementation.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Specify sane default image targets for the SH-2 platforms.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Migrate necessary libgcc bits in to arch/sh/lib for SUPERH32.Paul Mundt
This moves in the necessary libgcc bits for SUPERH32 and drops the libgcc linking for the regular targets. This in turn allows us to rip out quite a few hacks both in sh_ksyms_32 and arch/sh/Makefile. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: __udivdi3 -> do_div() in softfloat lib.Paul Mundt
Inhibit the generation of __udivdi3 for the softfloat lib, use do_div() outright. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Fix clock framework compiler warnings.Paul Mundt
CC arch/sh/kernel/cpu/clock.o arch/sh/kernel/cpu/clock.c: In function 'clk_disable': arch/sh/kernel/cpu/clock.c:156: warning: 'return' with a value, in function returning void Introduced by ("sh: enable and disable clocks recursively"). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: dynamic ftrace support.Matt Fleming
First cut at dynamic ftrace support. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: remove old sh_mobile mstpc clocksMagnus Damm
Remove the old sh_mobile mstpcr clocks. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 08:43:29 +0000