summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2012-07-27ARM: Kirkwood: Describe iConnects LEDs in DT.Andrew Lunn
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27ARM: Kirkwood: Describe iConnects temperature sensor in DT.Andrew Lunn
Now that we have I2C support in DT, describe the LM63 in the DT file for the iConnect. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27ARM: Kirkwood: Describe IB62x0 LEDs in DT.Andrew Lunn
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-27ARM: Kirkwood: Describe IB62x0 gpio-keys in DT.Andrew Lunn
Now that the GPIO controllers have been converted over to DT, described the gpio-keys in DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-27ARM: Kirkwood: Describe DNS32? gpio-keys in DT.Jamie Lentin
Move description of GPIO keys on both the DNS320 and DNS325 into DT. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsiJamie Lentin
A lot of device setup is shared between DNS-320 and DNS-325, move the definitions into a common include. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindingsJamie Lentin
Replace code in board-dnskw with the equivalent devicetree bindings. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27ARM: Kirkwood: Describe DNS325 temperature sensor in DT.Andrew Lunn
Now that we have I2C support in DT, describe the LM75 in the DT file for the DNS325. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
2012-07-27ARM: Kirkwood: Use DT to configure SATA device.Andrew Lunn
Convert boards using DT, but the old way of configuring SATA to now use properties in there DT file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-27ARM: kirkwood: use devicetree for SPI on dreamplugMichael Walle
Use the device tree for the SPI driver and partition layout. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27ARM: kirkwood: Add LS-XHL and LS-CHLv2 supportMichael Walle
Add support for Buffalo Linkstation LS-XHL and LS-CHLv2 using the device tree where possible. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex NetJosh Coombs
This patch supplies the necessary DTS and supporting files to boot up a Seagate GoFlex Net with 3.5.0-rc3. Signed-off-by: Joshua Coombs <josh.coombs@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27ARM: Kirkwood: Add basic device tree support for QNAP TS219.Andrew Lunn
The two different variants of QNAP TS devices, varying by SoC, put the GPIO keys on different GPIO lines. Hence we need two different DT board descriptions, which share the same board-ts219.c file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net>
2012-07-27ATA: sata_mv: Add device tree supportAndrew Lunn
Add support for instantiating this driver from device tree, and add the necassary DT information to the kirkwood.dtsi file. This is based on previous work by Michael Walle and Jason Cooper. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Josh Coombs <josh.coombs@gmail.com>
2012-07-27ARM: Orion: DTify the watchdog timer.Andrew Lunn
Add device tree support to the Orion watchdog timer, and enable its use in the kirkwood devices using device tree. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-27ARM: Orion: Add arch support needed for I2C via DT.Andrew Lunn
The MV64XXX I2C driver needs a clock in order to calculate the baud rate factors. So add an clk to the clk tree. Also add the base DT properties for kirkwood devices. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Conflicts: arch/arm/mach-kirkwood/common.c
2012-07-27ARM: kirkwood: use devicetree for orion-spiMichael Walle
Populate the devices with auxdata to set the device names which are used by clkdev to lookup the clocks. Signed-off-by: Michael Walle <micheal@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- v2: Add interrupts properties, although not used.
2012-07-27ARM: Orion: DT support for IRQ and GPIO ControllersAndrew Lunn
Both IRQ and GPIO controllers can now be represented in DT. The IRQ controllers are setup first, and then the GPIO controllers. Interrupts for GPIO lines are placed directly after the main interrupts in the interrupt space. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Josh Coombs <josh.coombs@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-25ARM: Kirkwood: Replace mrvl with marvellAndrew Lunn
It has been decided to use marvell, not mrvl, in the compatibility property. Search & replace. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-25ARM: Dove: Fixup ge00 initialisationHannes Reinecke
The last argument of orion_ge00_init() is actually the error interrupt, so we should be using the correct value here. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-25ARM: Kirkwood: Fix PHY disable clk problemsSimon Baatz
Commit 98d9986 (ARM: Kirkwood: Replace clock gating) and the fix 5fb2ce (ARM: Kirkwood: clk_register_gate_fn: add fn assignment) introduced a custom variant of clock gating which allows to define a function to be called before gating the clock off. This is used to disable the SATA and PCIe PHYs if the respective clocks are unused after initialization. However, of these two drivers, the SATA driver may be compiled as a module. The driver re-enables the clocks at module init but the PHYs stay disabled. Since the custom clock gating disabled the PHYs when gating the clock off, it should also re-enable them when enabling the clock gate. This is done by adding a second function that may be used to enable the PHYs. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-25ARM: Kirkwood: Ensure runit clock always ticks.Andrew Lunn
Marvell engineers tell us: It seems that many units use the RUNIT clock. SPI, UART, NAND, TWSI, ... So it's not possible to clock gate it. Currently the SPI, NAND and TWSI driver will clk_prepaure_enable() this clk, but since we have no idea what ... is, and turning this clk off results in a hard lock, unconditionally enable runit. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-14vsyscall_64: add missing ifdef CONFIG_SECCOMPWill Drewry
vsyscall_seccomp introduced a dependency on __secure_computing. On configurations with CONFIG_SECCOMP disabled, compilation will fail. Reported-by: feng xiangjun <fengxj325@gmail.com> Signed-off-by: Will Drewry <wad@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-14Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Samsung SoC fixes from Arnd Bergmann. * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: S3C24XX: Correct CAMIF interrupt definitions ARM: S3C24XX: Correct AC97 clock control bit for S3C2440 ARM: SAMSUNG: fix race in s3c_adc_start for ADC ARM: SAMSUNG: Update default rate for xusbxti clock ARM: EXYNOS: register devices in 'need_restore' state for pm_domains ARM: EXYNOS: read initial state of power domain from hw registers
2012-07-14Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus' and ↵Linus Torvalds
'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU, perf, and scheduler fixes from Ingo Molnar. The RCU fix is a revert for an optimization that could cause deadlocks. One of the scheduler commits (164c33c6adee "sched: Fix fork() error path to not crash") is correct but not complete (some architectures like Tile are not covered yet) - the resulting additional fixes are still WIP and Ingo did not want to delay these pending fixes. See this thread on lkml: [PATCH] fork: fix error handling in dup_task() The perf fixes are just trivial oneliners. * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "rcu: Move PREEMPT_RCU preemption to switch_to() invocation" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf kvm: Fix segfault with report and mixed guestmount use perf kvm: Fix regression with guest machine creation perf script: Fix format regression due to libtraceevent merge ring-buffer: Fix accounting of entries when removing pages ring-buffer: Fix crash due to uninitialized new_pages list head * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS/sched: Update scheduler file pattern sched/nohz: Rewrite and fix load-avg computation -- again sched: Fix fork() error path to not crash
2012-07-13x86/vsyscall: allow seccomp filter in vsyscall=emulateWill Drewry
If a seccomp filter program is installed, older static binaries and distributions with older libc implementations (glibc 2.13 and earlier) that rely on vsyscall use will be terminated regardless of the filter program policy when executing time, gettimeofday, or getcpu. This is only the case when vsyscall emulation is in use (vsyscall=emulate is the default). This patch emulates system call entry inside a vsyscall=emulate by populating regs->ax and regs->orig_ax with the system call number prior to calling into seccomp such that all seccomp-dependencies function normally. Additionally, system call return behavior is emulated in line with other vsyscall entrypoints for the trace/trap cases. [ v2: fixed ip and sp on SECCOMP_RET_TRAP/TRACE (thanks to luto@mit.edu) ] Reported-and-tested-by: Owen Kibel <qmewlo@gmail.com> Signed-off-by: Will Drewry <wad@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-13Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: SH: Convert out[bwl] macros to inline functions sh: Fix up se7721 GPIOLIB=y build warnings.
2012-07-13Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull a couple of KVM fixes from Avi Kivity: "One is an adjustment for an irq layer change that affected device assignment, the other a one-liner ppc fix." * git://git.kernel.org/pub/scm/virt/kvm/kvm: powerpc/kvm: Fix "PR" KVM implementation of H_CEDE KVM: Fix device assignment threaded irq handler
2012-07-13ARM: S3C24XX: Correct CAMIF interrupt definitionsSylwester Nawrocki
Properly define the CAMIF interrupt resources. This device have two interrupts - corresponding to the "codec" and "preview" data paths. IRQ_CAM is handled internally by the architecture and demultiplexed to IRQ_S3C2440_CAM_C and IRQ_S3C2440_CAM_P - these interrupts only should be handled in the driver. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: S3C24XX: Correct AC97 clock control bit for S3C2440Sylwester Nawrocki
Use correct gate control bit for AC97 clock which is S3C2440_CLKCON_AC97, not S3C2440_CLKCON_CAMERA. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: SAMSUNG: fix race in s3c_adc_start for ADCTodd Poynor
Checking for adc->ts_pend already claimed should be done with the lock held. Signed-off-by: Todd Poynor <toddpoynor@google.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13ARM: SAMSUNG: Update default rate for xusbxti clockTushar Behera
The rate of xusbxti clock is set in individual machine files. The default value should be defined at the clock definition and individual machine files should modify it if required. Division by zero in kernel. [<c0011849>] (unwind_backtrace+0x1/0x9c) from [<c022c663>] (Ldiv0+0x9/0x12) [<c022c663>] (Ldiv0+0x9/0x12) from [<c001a3c3>] (s3c_setrate_clksrc+0x33/0x78) [<c001a3c3>] (s3c_setrate_clksrc+0x33/0x78) from [<c0019e67>] (clk_set_rate+0x2f/0x78) Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-12ARM: EXYNOS: register devices in 'need_restore' state for pm_domainsMarek Szyprowski
Commit ca1d72f033 ('PM / Domains: Make it possible to add devices to inactive domains') introduced possibility to add devices to inactive power domains and added pm_genpd_dev_need_restore() function which lets platform core to notify power domain core that the specified device must be restored (with its runtime_resume() callback) before first use. This patch adds the pm_genpd_dev_need_restore() call what brings back the suspend/resume behaviour for the client devices known from the previous power domain driver (removed by commit 91cfbd4ee0 - 'ARM: EXYNOS: Hook up power domains to generic power domain infrastructure'). Client device drivers relay on that suspend/resume behaviour, thus this patch fixes runtime pm operation for client devices. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-12ARM: EXYNOS: read initial state of power domain from hw registersMarek Szyprowski
Some bootloaders disable unused power domains to reduce power consuption. Power domain driver can easily read the actual state from the hardware registers instead of assuming that their initial state is always 'on'. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-12SH: Convert out[bwl] macros to inline functionsCorey Minyard
The macros just called BUG(), but that results in unused variable warnings all over the place, like in the IPMI driver. The build regression emails were annoying me, so here's the fix. I have not even compile tested this, but it's rather obvious. [ port type mangled to unsigned long ] Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-07-11Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge random patches from Andrew Morton. * Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (32 commits) memblock: free allocated memblock_reserved_regions later mm: sparse: fix usemap allocation above node descriptor section mm: sparse: fix section usemap placement calculation xtensa: fix incorrect memset shmem: cleanup shmem_add_to_page_cache shmem: fix negative rss in memcg memory.stat tmpfs: revert SEEK_DATA and SEEK_HOLE drivers/rtc/rtc-twl.c: fix threaded IRQ to use IRQF_ONESHOT fat: fix non-atomic NFS i_pos read MAINTAINERS: add OMAP CPUfreq driver to OMAP Power Management section sgi-xp: nested calls to spin_lock_irqsave() fs: ramfs: file-nommu: add SetPageUptodate() drivers/rtc/rtc-mxc.c: fix irq enabled interrupts warning mm/memory_hotplug.c: release memory resources if hotadd_new_pgdat() fails h8300/uaccess: add mising __clear_user() h8300/uaccess: remove assignment to __gu_val in unhandled case of get_user() h8300/time: add missing #include <asm/irq_regs.h> h8300/signal: fix typo "statis" h8300/pgtable: add missing #include <asm-generic/pgtable.h> drivers/rtc/rtc-ab8500.c: ensure correct probing of the AB8500 RTC when Device Tree is enabled ...
2012-07-11xtensa: fix incorrect memsetAlan Cox
Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=43871 Reported-by: <dcb314@hotmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11h8300/uaccess: add mising __clear_user()Geert Uytterhoeven
Fix the build error: include/linux/regset.h: In function 'user_regset_copyout_zero': include/linux/regset.h:289:3: error: implicit declaration of function '__clear_user' [-Werror=implicit-function-declaration] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11h8300/uaccess: remove assignment to __gu_val in unhandled case of get_user()Geert Uytterhoeven
__gu_val is const if the passed ptr is const, giving: include/linux/pagemap.h: In function 'fault_in_pages_readable': include/linux/pagemap.h:442:2: error: assignment of read-only variable '__gu_val' include/linux/pagemap.h:448:4: error: assignment of read-only variable '__gu_val' include/linux/pagemap.h: In function 'fault_in_multipages_readable': include/linux/pagemap.h:499:3: error: assignment of read-only variable '__gu_val' include/linux/pagemap.h:508:3: error: assignment of read-only variable '__gu_val' make[4]: *** [init/main.o] Error 1 As we don't care about the actual value of __gu_val in the unhandled case (it will cause a link error anyway), just remove the assignment. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11h8300/time: add missing #include <asm/irq_regs.h>Geert Uytterhoeven
Fix the build error: arch/h8300/kernel/time.c: In function 'h8300_timer_tick': arch/h8300/kernel/time.c:39:2: error: implicit declaration of function 'get_irq_regs' [-Werror=implicit-function-declaration] arch/h8300/kernel/time.c:39:42: error: invalid type argument of '->' (have 'int') Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11h8300/signal: fix typo "statis"Geert Uytterhoeven
The keyword is "static", not "statis": arch/h8300/kernel/signal.c:455:8: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' arch/h8300/kernel/signal.c: In function 'do_notify_resume': arch/h8300/kernel/signal.c:511:3: error: implicit declaration of function 'do_signal' [-Werror=implicit-function-declaration] arch/h8300/kernel/signal.c: At top level: arch/h8300/kernel/signal.c:414:1: warning: 'handle_signal' defined but not used [-Wunused-function] Introduced in commit 7ae4e32a6514 ("h8300: switch to saved_sigmask-based sigsuspend/rt_sigsuspend") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11h8300/pgtable: add missing #include <asm-generic/pgtable.h>Geert Uytterhoeven
Fix the h8300 build error: kernel/sched/core.c: In function 'context_switch': kernel/sched/core.c:2061:2: error: implicit declaration of function 'arch_start_context_switch' [-Werror=implicit-function-declaration] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11mn10300: use "#elif defined(CONFIG_*)" instead of "#elif CONFIG_*"Geert Uytterhoeven
Fix the warnings: arch/mn10300/kernel/irq.c:173:7: warning: "CONFIG_MN10300_TTYSM1_TIMER9" is not defined [-Wundef] arch/mn10300/kernel/irq.c:175:7: warning: "CONFIG_MN10300_TTYSM1_TIMER3" is not defined [-Wundef] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11mn10300: mm/dma-alloc.c needs <linux/export.h>Geert Uytterhoeven
Fix the warnings: arch/mn10300/mm/dma-alloc.c: At top level: arch/mn10300/mm/dma-alloc.c:63:1: warning: data definition has no type or storage class [enabled by default] arch/mn10300/mm/dma-alloc.c:63:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int] arch/mn10300/mm/dma-alloc.c:63:1: warning: parameter names (without types) in function declaration [enabled by default] arch/mn10300/mm/dma-alloc.c:75:1: warning: data definition has no type or storage class [enabled by default] arch/mn10300/mm/dma-alloc.c:75:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int] arch/mn10300/mm/dma-alloc.c:75:1: warning: parameter names (without types) in function declaration [enabled by default] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11mn10300: kernel/traps.c needs <linux/export.h>Geert Uytterhoeven
Fix the warning: arch/mn10300/kernel/traps.c:304:1: warning: data definition has no type or storage class [enabled by default] arch/mn10300/kernel/traps.c:304:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int] arch/mn10300/kernel/traps.c:304:1: warning: parameter names (without types) in function declaration [enabled by default] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11mn10300: kernel/internal.h needs <linux/irqreturn.h>Geert Uytterhoeven
Fix the nm10300 build failure: In file included from arch/mn10300/kernel/csrc-mn10300.c:14:0: arch/mn10300/kernel/internal.h:42:1: error: unknown type name 'irqreturn_t' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11mn10300: remove duplicate definition of PTRACE_O_TRACESYSGOODGeert Uytterhoeven
Fix the warning: include/linux/ptrace.h:66:0: warning: "PTRACE_O_TRACESYSGOOD" redefined [enabled by default] arch/mn10300/include/asm/ptrace.h:85:0: note: this is the location of the previous definition We already have it in <linux/ptrace.h>, so remove it from <asm/ptrace.h> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11mn10300: move setup_jiffies_interrupt() to cevt-mn10300.cGeert Uytterhoeven
Move the static inline function setup_jiffies_interrupt() from <asm/timex.h> to arch/mn10300/kernel/cevt-mn10300.c, which is its only callsite. This allows to remove the inclusion of <asm/hardirq.h> and <linux/irq.h> from <asm/timex.h> and <unit/timex.h>, fixing include hell like: include/linux/jiffies.h:260:31: warning: "CLOCK_TICK_RATE" is not defined [-Wundef] include/linux/jiffies.h:260:31: warning: "CLOCK_TICK_RATE" is not defined [-Wundef] include/linux/jiffies.h:46:42: error: division by zero in #if ... make[4]: *** [arch/mn10300/kernel/asm-offsets.s] Error 1 and (after a quick hack for the above by defining CLOCK_TICK_RATE in <linux/jiffies.h>): In file included from include/linux/notifier.h:15:0, from include/linux/memory_hotplug.h:6, from include/linux/mmzone.h:718, from include/linux/gfp.h:4, from include/linux/irq.h:20, from arch/mn10300/unit-asb2303/include/unit/timex.h:15, from arch/mn10300/include/asm/timex.h:15, from include/linux/timex.h:174, from include/linux/jiffies.h:8, from include/linux/ktime.h:25, from include/linux/timer.h:5, from include/linux/workqueue.h:8, include/linux/srcu.h:55:22: error: field 'work' has incomplete type As a consequence, we do need a few more inclusions of <asm/irq.h>, namely in arch/mn10300/unit-asb2303/smc91111.c and arch/mn10300/unit-asb2305/unit-init.c. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile fix from Chris Metcalf: "This is a single change to fix backtracing in big-endian mode." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: big-endian: properly bswap instruction bundles when backtracing
2012-07-11Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: - multiple omap2+ bug fixes - a regression on ux500 dt support - a build failure on shmobile * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP2+: omap2plus_defconfig: EHCI driver is not stable, disable it ARM: shmobile: fix platsmp.c build when ARCH_SH73A0=n ARM: ux500: Over-ride the DT device naming scheme for pinctrl ARM: ux500: Fix build errors/warnings when MACH_UX500_DT is not set of: address: Don't fail a lookup just because a node has no reg property ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-06 01:36:02 +0000