summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2014-07-28powerpc: Remove misleading DISABLE_INTSMichael Ellerman
DISABLE_INTS has a long and storied history, but for some time now it has not actually disabled interrupts. For the open-coded exception handlers, just stop using it, instead call RECONCILE_IRQ_STATE directly. This has the benefit of removing a level of indirection, and making it clear that r10 & r11 are used at that point. For the addition case we still need a macro, so rename it to clarify what it actually does. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28powerpc: Document register clobbering in EXCEPTION_COMMON()Michael Ellerman
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28powerpc: Update comments in irqflags.hMichael Ellerman
The comment on TRACE_ENABLE_INTS is incorrect, and appears to have always been incorrect since the code was merged. It probably came from an original out-of-tree patch. Replace it with something that's correct. Also propagate the message to RECONCILE_IRQ_STATE(), because it's potentially subtle. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28powerpc: Move bad_stack() below the fwnmi_data_areaMichael Ellerman
At the moment the allmodconfig build is failing because we run out of space between altivec_assist() at 0x5700 and the fwnmi_data_area at 0x7000. Fixing it permanently will take some more work, but a quick fix is to move bad_stack() below the fwnmi_data_area. That gives us just enough room with everything enabled. bad_stack() is called from the common exception handlers, but it's a non-conditional branch, so we have plenty of scope to move it further way. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28powerpc: Remove CLASSIC_PPCMichael Ellerman
We have a strange #define in cputable.h called CLASSIC_PPC. Although it is defined for 32 & 64bit, it's only used for 32bit and it's basically a duplicate of CONFIG_PPC_BOOK3S_32, so let's use the latter. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28powerpc: Remove CONFIG_POWER4Michael Ellerman
Although the name CONFIG_POWER4 suggests that it controls support for power4 cpus, this symbol is actually misnamed. It is a historical wart from the powermac code, which used to support building a 32-bit kernel for power4. CONFIG_POWER4 was used in that context to guard code that was 64-bit only. In the powermac code we can just use CONFIG_PPC64 instead, and in other places it is a synonym for CONFIG_PPC_BOOK3S_64. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28powerpc: Remove power3 from commentsMichael Ellerman
There are still a few occurences where it remains, because it helps to explain something that persists. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28powerpc: Remove oprofile RS64 supportMichael Ellerman
We no longer support these cpus, so we don't need oprofile support for them either. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28powerpc: Remove CONFIG_POWER3Michael Ellerman
Now that we have dropped power3 support we can remove CONFIG_POWER3. The usage in pgtable_32.c was already dead code as CONFIG_POWER3 was not selectable on PPC32. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28powerpc: Pull out ksp_vsid logic into a helperMichael Ellerman
The previous patch left a bit of a wart in copy_process(). Clean it up a bit by moving the logic out into a helper. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28powerpc: Remove MMU_FTR_SLBMichael Ellerman
We now only support cpus that use an SLB, so we don't need an MMU feature to indicate that. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28powerpc: Remove STAB codeMichael Ellerman
Old cpus didn't have a Segment Lookaside Buffer (SLB), instead they had a Segment Table (STAB). Now that we've dropped support for those cpus, we can remove the STAB support entirely. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28powerpc: Drop support for pre-POWER4 cpusMichael Ellerman
We inadvertently broke power3 support back in 3.4 with commit f5339277eb8d "powerpc: Remove FW_FEATURE ISERIES from arch code". No one noticed until at least 3.9. By then we'd also broken it with the optimised memcpy, copy_to/from_user and clear_user routines. We don't want to add any more complexity to those just to support ancient cpus, so it seems like it's a good time to drop support for power3 and earlier. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28powerpc: Use standard macros for sys_sigpending() & sys_old_getrlimit()Michael Ellerman
Currently we have sys_sigpending and sys_old_getrlimit defined to use COMPAT_SYS() in systbl.h, but then both are #defined to sys_ni_syscall in systbl.S. This seems to have been done when ppc and ppc64 were merged, in commit 9994a33 "Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S". AFAICS there's no longer (or never was) any need for this, we can just use SYSX() for both and remove the #defines to sys_ni_syscall. The expansion before was: #define COMPAT_SYS(func) .llong .sys_##func,.compat_sys_##func #define sys_old_getrlimit sys_ni_syscall COMPAT_SYS(old_getrlimit) => .llong .sys_old_getrlimit,.compat_sys_old_getrlimit => .llong .sys_ni_syscall,.compat_sys_old_getrlimit After is: #define SYSX(f, f3264, f32) .llong .f,.f3264 SYSX(sys_ni_syscall, compat_sys_old_getrlimit, sys_old_getrlimit) => .llong .sys_ni_syscall,.compat_sys_old_getrlimit ie. they are equivalent. Finally both COMPAT_SYS() and SYSX() evaluate to sys_ni_syscall in the Cell SPU code. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28Merge branch 'merge' into nextBenjamin Herrenschmidt
Bring in some important fixes from the 3.16 branch
2014-07-28powerpc: Fix endianness of flash_block_list in rtas_flashThomas Falcon
The function rtas_flash_firmware passes the address of a data structure, flash_block_list, when making the update-flash-64-and-reboot rtas call. While the endianness of the address is handled correctly, the endianness of the data is not. This patch ensures that the data in flash_block_list is big endian when passed to rtas on little endian hosts. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28powerpc/powernv: Change BUG_ON to WARN_ON in elog codeVasant Hegde
We can continue to read the error log (up to MAX size) even if we get the elog size more than MAX size. Hence change BUG_ON to WARN_ON. Also updated error message. Reported-by: Gopesh Kumar Chaudhary <gopchaud@in.ibm.com> Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-27Merge branches 'pm-opp' and 'pm-general'Rafael J. Wysocki
* pm-opp: PM / OPP: Remove ARCH_HAS_OPP * pm-general: MAINTAINERS: power_supply: update maintainership
2014-07-27Merge branch 'acpi-config'Rafael J. Wysocki
* acpi-config: ACPI / processor: Introduce ARCH_MIGHT_HAVE_ACPI_PDC ACPI: Don't use acpi_lapic in ACPI core code ACPI: add config for BIOS table scan
2014-07-27Merge branch 'acpi-headers'Rafael J. Wysocki
* acpi-headers: ACPI: Add support to force header inclusion rules for <acpi/acpi.h>. ACPI / SFI: Fix wrong <acpi/acpi.h> inclusion in SFI/ACPI wrapper - table definitions. ACPICA: Linux: Allow ACPICA inclusion for CONFIG_ACPI=n builds. ACPICA: Linux: Add support to exclude <asm/acenv.h> inclusion. ACPICA: Linux: Add stub implementation of ACPICA 64-bit mathematics. ACPICA: Linux: Add stub support for Linux specific variables and functions.
2014-07-27staging: silicom: remove driverKristina Martšenko
The driver hasn't been cleaned up and it doesn't look like anyone is working on it anymore (including the original author). So remove it. If someone wants to work on cleaning the driver up and moving it out of staging, this commit can be reverted. In addition, since this removes the CONFIG_NET_VENDOR_SILICOM config symbol, remove the symbol from all defconfig files that reference it. Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com> Cc: Daniel Cotey <puff65537@bansheeslibrary.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-27Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A bunch of fixes for perf and kprobes: - revert a commit that caused a perf group regression - silence dmesg spam - fix kprobe probing errors on ia64 and ppc64 - filter kprobe faults from userspace - lockdep fix for perf exit path - prevent perf #GP in KVM guest - correct perf event and filters" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kprobes: Fix "Failed to find blacklist" probing errors on ia64 and ppc64 kprobes/x86: Don't try to resolve kprobe faults from userspace perf/x86/intel: Avoid spamming kernel log for BTS buffer failure perf/x86/intel: Protect LBR and extra_regs against KVM lying perf: Fix lockdep warning on process exit perf/x86/intel/uncore: Fix SNB-EP/IVT Cbox filter mappings perf/x86/intel: Use proper dTLB-load-misses event on IvyBridge perf: Revert ("perf: Always destroy groups on exit")
2014-07-27Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "A couple of crash fixes, plus a fix that on 32 bits would cause a missing -ENOSYS for nonexistent system calls" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, cpu: Fix cache topology for early P4-SMT x86_32, entry: Store badsys error code in %eax x86, MCE: Robustify mcheck_init_device
2014-07-27ARM: dts: rk3188-radxarock: add GPIO IR receiver nodeBeniamino Galvani
This adds a device tree node for the infrared receiver connected to a GPIO pin on the Radxa Rock. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27ARM: dts: rockchip: add pwm nodesBeniamino Galvani
This adds the necessary nodex and pinctrl settings for the Rockchip PWM-driver. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Modified to use the new clock defines and added rk3066 pins. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26ARM: dts: rockchip: add both clocks to uart nodesHeiko Stuebner
Use the newly ammended dw_8250 clock binding to define both the baudclk as well as the pclk supplying the ip. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26ARM: dts: rk3188-radxarock: enable sd-card slotHeiko Stuebner
The Radxa Rock contains one sd-card slot. Add the supplying regulator and enable its dw_mmc node. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26ARM: dts: add i2c and regulator nodes to rk3188-radxarockBeniamino Galvani
This enables the 2nd i2c bus and adds the act8846 pmic as device. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26ARM: dts: rockchip: add tps65910 regulator for bqcurie2Heiko Stuebner
The Curie2 uses a tps659102 as its main pmic, so add the i2c1 and tps65910 node as well as define the used voltages and regulator-names according to the schematics. Also fix the supply of the sd0 regulator, as it is supplied by the vio reg. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26ARM: dts: add rk3066 and rk3188 i2c device nodes and pinctrl settingsHeiko Stuebner
The core controller settings themself are identical, only the compatible and pinctrl settings differ. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26ARM: dts: rockchip: oder nodes by register addressHeiko Stuebner
To create some sort of ordering of nodes, they are suggested to be ordered by their register address. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26ARM: dts: rockchip: remove address from pinctrl nodesHeiko Stuebner
The pincontroller uses the GRF and PMU syscons nowadays, so should not contain an address in its device node. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26ARM: dts: uses handles to reference nodes for changesHeiko Stuebner
Use the handles for subsequent changes to nodes, similar to like the rk3288 submission does it. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26ARM: dts: rockchip: add handles for shared nodes that don't have one yetHeiko Stuebner
Some nodes that are changed in the dtsi hierarchy do not have handles yet. As it was suggested in the rk3288 submission to do subsequent nodes changes through such handle-references, add the missing ones. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26ARM: dts: rockchip: remove soc subnodesHeiko Stuebner
Comments received from the rk3288 submission indicated that a generic subnode to group soc components should not be used. So to keep all rockchip devicetree files similar, remove it from rk3066 and rk3188. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26arm: dts: rockchip: remove obsolete clock gate definitionsHeiko Stuebner
The clock and reset unit is now provided by the rk3188-cru clock driver and thus the old style definitions of the gate clocks can go away. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de>
2014-07-26ARM: dts: rockchip: move oscillator input clock into main dtsiHeiko Stuebner
The clock definitions get a lot shorter due to the soc clocks being handled by rk3188-cru and only the input clock remains. These can now simply live in the main rk3xxx.dtsi without affecting readability. At the same time, rename the node to oscillator, adding a clock-output-names property to match how the rk3288 handles this. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de>
2014-07-26ARM: dts: rockchip: add cru nodes and update device clocks to use itHeiko Stuebner
This adds a node for the clock and reset unit on rk3188 and rk3066 SoCs and also updates the device nodes retrieve their clocks from there, instead of the previous gate clock nodes. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de>
2014-07-26Merge tag 'mvebu-soc-3.17-4' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
next/soc Merge "mvebu SoC changes for v3.17 (round 4)" from Jason Cooper: - Armada XP - Fix return value check in pmsu code - Document URLs for new public datasheets (Thanks, Marvell & free-electrons!) - Armada 370/38x - Add cpuidle support - mvebu - Fix build when no platforms are selected - Update EBU SoC status in docs * tag 'mvebu-soc-3.17-4' of git://git.infradead.org/linux-mvebu: (21 commits) Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ARM: mvebu: make the snoop disabling optional in mvebu_v7_pmsu_idle_prepare() ARM: mvebu: use a local variable to store the resume address ARM: mvebu: make the cpuidle initialization more generic ARM: mvebu: rename the armada_370_xp symbols to mvebu_v7 in pmsu.c ARM: mvebu: use the common function for Armada 375 SMP workaround ARM: mvebu: add a common function for the boot address work around ARM: mvebu: sort the #include of pmsu.c in alphabetic order ARM: mvebu: split again armada_370_xp_pmsu_idle_enter() in PMSU code ARM: mvebu: fix return value check in armada_xp_pmsu_cpufreq_init() clk: mvebu: extend clk-cpu for dynamic frequency scaling ARM: mvebu: extend PMSU code to support dynamic frequency scaling ... Conflicts: arch/arm/mach-mvebu/Kconfig drivers/cpuidle/cpuidle-armada-370-xp.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26Merge branch 'cleanup/gpio-header-removal' into next/socArnd Bergmann
* cleanup/gpio-header-removal: ARM: delete old reference to ARM_GPIOLIB_COMPLEX ARM: kill CONFIG_NEED_MACH_GPIO_H ARM: mach-s5p: get rid of all <mach/gpio.h> headers ARM: s5p: cut the custom ARCH_NR_GPIOS definition This resolves a massive amount of conflicts between the mach/gpio.h removal and the s5p platform removal. Almost all changes are trivial, as both sides remove stuff. Conflicts: arch/arm/Kconfig arch/arm/mach-s5p64x0/common.c arch/arm/mach-s5p64x0/dev-audio.c arch/arm/mach-s5p64x0/include/mach/gpio-samsung.h arch/arm/mach-s5p64x0/mach-smdk6440.c arch/arm/mach-s5p64x0/mach-smdk6450.c arch/arm/mach-s5p64x0/setup-fb-24bpp.c arch/arm/mach-s5p64x0/setup-i2c0.c arch/arm/mach-s5p64x0/setup-i2c1.c arch/arm/mach-s5p64x0/setup-sdhci-gpio.c arch/arm/mach-s5p64x0/setup-spi.c arch/arm/mach-s5pc100/dev-audio.c arch/arm/mach-s5pc100/include/mach/gpio-samsung.h arch/arm/mach-s5pc100/mach-smdkc100.c arch/arm/mach-s5pc100/setup-fb-24bpp.c arch/arm/mach-s5pc100/setup-i2c0.c arch/arm/mach-s5pc100/setup-i2c1.c arch/arm/mach-s5pc100/setup-ide.c arch/arm/mach-s5pc100/setup-keypad.c arch/arm/mach-s5pc100/setup-sdhci-gpio.c arch/arm/mach-s5pc100/setup-spi.c arch/arm/mach-s5pv210/dev-audio.c arch/arm/mach-s5pv210/include/mach/gpio-samsung.h arch/arm/mach-s5pv210/mach-aquila.c arch/arm/mach-s5pv210/mach-goni.c arch/arm/mach-s5pv210/mach-smdkv210.c arch/arm/mach-s5pv210/setup-fb-24bpp.c arch/arm/mach-s5pv210/setup-fimc.c arch/arm/mach-s5pv210/setup-i2c0.c arch/arm/mach-s5pv210/setup-i2c1.c arch/arm/mach-s5pv210/setup-i2c2.c arch/arm/mach-s5pv210/setup-ide.c arch/arm/mach-s5pv210/setup-keypad.c arch/arm/mach-s5pv210/setup-sdhci-gpio.c arch/arm/mach-s5pv210/setup-spi.c arch/arm/plat-samsung/Kconfig arch/arm/plat-samsung/s5p-irq-eint.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26Merge branch 'next/fixes-non-critical' into next/socArnd Bergmann
This resolves a nontrivial conflict against a bug fix in another branch. Conflicts: arch/arm/mach-exynos/pm.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26m68k/sun3: Remove define statement no longer neededNicholas Krause
In the file sun3_pgalloc.h we should remove #define_KERNPG_TABLE equals 0 as this define statement hasn't been used since kernel verison 2.5.18 and is now no longer needed. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2014-07-26Merge tag 'v3.17-rockchip-smp-hotplug' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc Merge "CPU-Hotplug support for RK3066 and RK3188" from Heiko Stuebner: * tag 'v3.17-rockchip-smp-hotplug' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: rockchip: Add cpu hotplug support for RK3XXX SoCs ARM: rockchip: select ARMv7 compiler flags for platsmp.o Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26ARM: dts: Build dtbs for Rockchip boardsDoug Anderson
This allows the "make dtbs" target to work. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26ARM: dts: add rk3288 evaluation boardHeiko Stuebner
There exist 2 variants using either the act8846 or rk808 as pmic, while the rest of the board stays the same. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26ARM: dts: rockchip: add core rk3288 dtsiHeiko Stuebner
Node definitions shared by all rk3288 based boards. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Will Deacon <will.deacon@arm.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26ARM: rockchip: enable support for RK3288 SoCsHeiko Stuebner
Enable HAVE_ARM_ARCH_TIMER and add a rockchip,rk3288 compatible. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26ARM: Kconfig: set default gpio number for rockchip SoCsHeiko Stuebner
The new rk3288 needs a bigger gpio space, as it has 9 gpio banks. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Tested-by: Will Deacon <will.deacon@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26ARM: rockchip: add debug uart used by rk3288Heiko Stuebner
The uarts on rk3288 are still compatible with the dw_8250, but located at a different position and need DEBUG_UART_8250_WORD enabled. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Tested-by: Will Deacon <will.deacon@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26ARM: rockchip: clarify usability of DEBUG_RK3X_UART debug_ll optionsHeiko Stuebner
The debug uart settings from the DEBUG_RK3X_UART options are usable on all Rockchip SoCs from the rk30xx and rk31xx series but not on the new rk3288 SoCs. Thus clarify their use to prevent confusion. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de>