summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2011-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/nico/orion into devel-stableRussell King
2011-03-05ARM: orion5x: fix compiler cast warnings in ts78xx-setup.cAlexander Clouter
Signed-off-by: Alexander Clouter <alex@digriz.org.uk> [np: used min_t() as suggested by Sergei Shtylyov <sshtylyov@mvista.com>] Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-03-05ARM: orion5x: use safer FPGA ID 'default' for TS-78xxAlexander Clouter
Originally the FPGA ID checking switch statement left disabled all the TS implemented FPGA devices if the ID was unknown to it. Michael Spang created a fix in f9b1184e that changed the default to enable the devices in the event TS silently release more revisions into the wild, this unfortunately breaks custom FPGA bitstreams. This patch amends the switch statement so that the TS devices are only enabled if on the revision number is unknown (whilst the magic matches). Changelog: v2: neater implementation and some cosmetic changes v1: initial release <20110305112937.GA22117@chipmunk> Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-03-04ARM: Enable TS-78XX features in unknown revisionsMichael Spang
When the manufacturer increases the revision number the platform devices for the RTC, NAND, and RNG disappear. We should assume new revisions have these devices instead of assuming they do not. Signed-off-by: Michael Spang <mspang@csclub.uwaterloo.ca> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-03-03ARM: Dove: Remove PXA compatibility IRQ defines.Lennert Buytenhek
These are not currently used anywhere, but when the relevant peripherals are enabled on the Dove port, the IRQ numbers should be passed into the drivers via platform device resources rather than having the drivers get them from platform headers directly. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Acked-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-03-03ARM: Remove dependency of plat-orion GPIO code on mach directory includes.Lennert Buytenhek
This patch makes the various mach dirs that use the plat-orion GPIO code pass in GPIO-related platform info (GPIO controller base address, secondary base IRQ number, etc) explicitly, instead of having plat-orion get those values by including a mach dir include file -- the latter mechanism is problematic if you want to support multiple ARM platforms in the same kernel image. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-03-03ARM: Remove dependency of plat-orion time code on mach directory includes.Lennert Buytenhek
This patch makes the various mach dirs that use the plat-orion time code pass in timer and bridge addresses explicitly, instead of having plat-orion get those values by including a mach dir include file -- the latter mechanism is problematic if you want to support multiple ARM platforms in the same kernel image. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-03-03[ARM] Kirkwood: add LaCie d2 Network v2 to defconfigNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-03-03[ARM] Kirkwood: make kirkwood_find_tclk() staticNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-03-03[ARM] Kirkwood: t5325: add audio supportArnaud Patard
This patch declares the i2c audio codec and initialise audio. It's adding the alc5621 codec in the i2c board info and is calling kirkwood_audio_init() to initialize kirkwood audio. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-03-03[ARM] update FPGA revisions for TS-7800Alexander Clouter
New FPGA revisions have been released and seen in the wild on the platform, so it's time to update the list. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-03-03[ARM] Kirkwood: initialize PCIE1 for QNAP TS-419P+Zintis Pētersons
Initialize PCIE1 on the 6282-based QNAP TS-419P+ since it has a Marvell 9125 SATA chip on each PCI bus. Signed-off-by: Zintis Pētersons <zintis.petersons@abcsolutions.lv> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-03-03[ARM] Kirkwood: enable PCIe for kexecEric Cooper
Use the machine-specific kexec_reinit hook to make sure PCIe is enabled before starting a new kernel. Signed-off-by: Eric Cooper <ecc@cmu.edu> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-03-03[ARM] Kirkwood: enable PCIe before reading device ID registerEric Cooper
PCIe may have been disabled (by kirkwood_clock_gate) if this kernel was started by kexec. Make sure PCIe is enabled before attempting to access the device ID register, otherwise the system will hang. Signed-off-by: Eric Cooper <ecc@cmu.edu> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-03-03[ARM] add machine-specific hook to machine_kexecEric Cooper
Provide the option to call a machine-specific function before kexec'ing a new kernel. Signed-off-by: Eric Cooper <ecc@cmu.edu> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-03-03[ARM] orion5x: accelerate NAND on the TS-78xxAlexander Clouter
The NAND supports 32bit reads and writes so lets stop shunting 8bit chunks across the bus. Doing a dumb 'dd' benchmark, this increases performance roughly like so: * read: 1.3MB/s to 3.4MB/s * write: 614kB/s to 882kB/s Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-02-21Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S5PV210: Fix regulator names ARM: S5PV210: Update max8998_platform_data ARM: SAMSUNG: Drop exporting s3c24xx_ts_set_platdata ARM: S5P: Fix end address in memory resource information for UART devices ARM: S5P64X0: Cleanup map.h file ARM: S5P6442: Cleanup map.h file ARM: S5PC100: Clenaup map.h file ARM: S5PV210: Cleanup map.h file ARM: S5PV310: Cleanup map.h file
2011-02-21Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6745/1: kprobes insn decoding fix ARM: tlb: move noMMU tlb_flush() to asm/tlb.h ARM: tlb: delay page freeing for SMP and ARMv7 CPUs ARM: Keep exit text/data around for SMP_ON_UP ARM: Ensure predictable endian state on signal handler entry ARM: 6740/1: Place correctly notes section in the linker script ARM: 6700/1: SPEAr: Correct SOC config base address for spear320 ARM: 6722/1: SPEAr: sp810: switch to slow mode before reset ARM: 6712/1: SPEAr: replace readl(), writel() with relaxed versions in uncompress.h ARM: 6720/1: SPEAr: Append UL to VMALLOC_END ARM: 6676/1: Correct the cpu_architecture() function for ARMv7 ARM: 6739/1: update .gitignore for boot/compressed ARM: 6743/1: errata: interrupted ICALLUIS may prevent completion of broadcasted operation ARM: 6742/1: pmu: avoid setting IRQ affinity on UP systems ARM: 6741/1: errata: pl310 cache sync operation may be faulty
2011-02-21Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] net: provide architecture specific NET_SKB_PAD [S390] atomic: use inline asm [S390] correct ipl parameter block safe guard [S390] atomic: use ACCESS_ONCE() for atomic_read() [S390] dasd: correct device table
2011-02-21ARM: 6745/1: kprobes insn decoding fixNicolas Pitre
Marcin Slusarz says: > In arch/arm/kernel/kprobes-decode.c there's a function > arm_kprobe_decode_insn which does: > > } else if ((insn & 0x0e000000) == 0x0c400000) { > ... > > This is always false, so code below is dead. > I found this bug by coccinelle (http://coccinelle.lip6.fr/). Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: tlb: move noMMU tlb_flush() to asm/tlb.hRussell King
There's no need to noMMU to put tlb_flush() in asm/tlbflush.h - it's part of the tlb shootdown interface. Move it to asm/tlb.h instead, as per x86. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: tlb: delay page freeing for SMP and ARMv7 CPUsRussell King
We need to delay freeing any mapped page on SMP and ARMv7 systems to ensure that the data is not accessed by other CPUs, or is used for speculative prefetch with ARMv7. This includes not only mapped pages but also pages used for the page tables themselves. This avoids races with the MMU/other CPUs accessing pages after they've been freed but before we've invalidated the TLB. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: Keep exit text/data around for SMP_ON_UPRussell King
When SMP_ON_UP is used and the spinlocks are inlined, we end up with inline spinlocks in the exit code, with references from the SMP alternatives section to the exit sections. This causes link time errors. Avoid this by placing the exit sections in the init-discarded region. Cc: <stable@kernel.org> Tested-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: Ensure predictable endian state on signal handler entryRussell King
Ensure a predictable endian state when entering signal handlers. This avoids programs which use SETEND to momentarily switch their endian state from having their signal handlers entered with an unpredictable endian state. Cc: <stable@kernel.org> Acked-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: 6740/1: Place correctly notes section in the linker scriptPawel Moll
Commit 18991197b4b588255ccabf472ebc84db7b66a19c added --build-id linker option when toolchain supports it. ARM one does, but for some reason places the section at 0 when linker script doesn't mention it explicitly. The 1e621a8e3752367d4aae78a8ab00a18fb2793f34 worked around the problem removing this section from binary image with explicit objcopy options, but it still exists in vmlinux, confusing tools like debuggers and perf. This problem was discussed here: http://lists.infradead.org/pipermail/linux-arm-kernel/2010-May/015994.html http://lists.infradead.org/pipermail/linux-arm-kernel/2010-May/015994.html but the proposed changes to the linker script were substantial. This patch simply places NOTES (36 bytes long, at least when compiled with CodeSourcery toolchain) between data and bss, which seem to be the right place (and suggested by the sample linker script in include/asm-generic/vmlinux.lds.h). It is enough to place it correctly in vmlinux (so debuggers are happy): Section Headers: [11] .data PROGBITS c07ce000 7ce000 020fc0 00 WA 0 0 32 [12] .notes NOTE c07eefc0 7eefc0 000024 00 AX 0 0 4 [13] .bss NOBITS c07ef000 7eefe4 01e628 00 WA 0 0 32 Program Headers: LOAD 0x008000 0xc0008000 0xc0008000 0x7e6fe4 0x805628 RWE 0x8000 NOTE 0x7eefc0 0xc07eefc0 0xc07eefc0 0x00024 0x00024 R E 0x4 Section to Segment mapping: Segment Sections... 00 <...> .data .notes .bss 01 .notes and to get it exposed as /sys/kernel/notes used by perf tools. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: 6700/1: SPEAr: Correct SOC config base address for spear320viresh kumar
SPEAR320_SOC_CONFIG_BASE was wrong, causing the wrong registers to be accessed. Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: 6722/1: SPEAr: sp810: switch to slow mode before resetShiraz Hashim
In sysctl_soft_reset(), switch to slow mode before resetting the system via the system controller. This is required. Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: 6712/1: SPEAr: replace readl(), writel() with relaxed versions in ↵viresh kumar
uncompress.h readl() and writel() calls the outer cache maintainance operations which are not available during Linux uncompression. This patch replaces readl() and writel() with readl_relaxed() and writel_relaxed() to avoid the link time errors. Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-21ARM: 6720/1: SPEAr: Append UL to VMALLOC_ENDviresh kumar
This patch fixes following warning: arch/arm/mm/init.c:606: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int' by appending UL to VMALLOC_END's Number. Reviewed-by: Stanley Miao <stanley.miao@windriver.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19ARM: 6676/1: Correct the cpu_architecture() function for ARMv7Catalin Marinas
If ID_MMFR0[3:0] >= 3, the architecture version is ARMv7. The code was currently only testing for ID_MMFR0[3:0] == 3. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19ARM: 6739/1: update .gitignore for boot/compressedNicolas Pitre
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19ARM: 6743/1: errata: interrupted ICALLUIS may prevent completion of ↵Will Deacon
broadcasted operation On versions of the Cortex-A9 prior to r3p0, an interrupted ICIALLUIS operation may prevent the completion of a following broadcasted operation if the second operation is received by a CPU before the ICIALLUIS has completed, potentially leading to corrupted entries in the cache or TLB. This workaround sets a bit in the diagnostic register of the Cortex-A9, causing CP15 maintenance operations to be uninterruptible. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19ARM: 6742/1: pmu: avoid setting IRQ affinity on UP systemsWill Deacon
Now that we can execute a CONFIG_SMP kernel on a uniprocessor system, extra care has to be taken in the PMU IRQ affinity setting code to ensure that we don't always fail to initialise. This patch changes the CPU PMU initialisation code so that when we only have a single IRQ, whose affinity can not be changed at the controller, we report success (0) rather than -EINVAL. Reported-by: Avik Sil <avik.sil@linaro.org> Acked-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19ARM: 6741/1: errata: pl310 cache sync operation may be faultySrinidhi Kasagar
The effect of cache sync operation is to drain the store buffer and wait for all internal buffers to be empty. In normal conditions, store buffer is able to merge the normal memory writes within its 32-byte data buffers. Due to this erratum present in r3p0, the effect of cache sync operation on the store buffer still remains when the operation completes. This means that the store buffer is always asked to drain and this prevents it from merging any further writes. This can severely affect performance on the write traffic esp. on Normal memory NC one. The proposed workaround is to replace the normal offset of cache sync operation(0x730) by another offset targeting an unmapped PL310 register 0x740. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19Merge branch 'pmu-for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into devel-stable
2011-02-18ARM: S5PV210: Fix regulator namesMarek Szyprowski
Since commit 1130e5b3ff4 regulators are exported to debugfs. The names of the regulators that contains slash ('/') causes an ops during kernel boot. This patch fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-18ARM: S5PV210: Update max8998_platform_dataMarek Szyprowski
Max8998 PMIC driver's platform data has been changed once again in commit 735a3d9efdc. This patch fixes build break caused by that commit. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-18ARM: SAMSUNG: Drop exporting s3c24xx_ts_set_platdataAxel Lin
s3c24xx_ts_set_platdata is annotated __init and not used by any module, thus don't export it. This patch fixes below warning: WARNING: arch/arm/plat-samsung/built-in.o(__ksymtab+0x90): Section mismatch in reference from the variable __ksymtab_s3c24xx_ts_set_platdata to the function .init.text:s3c24xx_ts_set_platdata() The symbol s3c24xx_ts_set_platdata is exported and annotated __init Fix this by removing the __init annotation of s3c24xx_ts_set_platdata or drop the export. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix NMI startup bug which also breaks perf. sparc: fix size argument to find_next_zero_bit() sparc: use bitmap_set() sparc32: unaligned memory access (MNA) trap handler bug
2011-02-17mach-ux500: DB8500 PMU supportRabin Vincent
DB8500 has irqs from two cores ORed into one. Implement a workaround to handle this by bouncing the interrupt by setting the affinity to the other core when the interrupt appears to be spurious on the current core. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-02-17ARM: perf_event: allow platform-specific interrupt handlerRabin Vincent
Allow a platform-specific IRQ handler to be specified via platform data. This will be used to implement the single-irq workaround for the DB8500. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-02-17[S390] net: provide architecture specific NET_SKB_PADHorst Hartmann
NET_SKB_PAD has been increased from 32 to 64 and later to max(32, L1_CACHE_BYTES). This led to a 25% throughput decrease for streaming workloads accompanied by a 37% CPU cost increase on s390. Define a architecture specific NET_SKB_PAD with the old value of 32. Signed-off-by: Horst Hartmann <horsth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-02-17[S390] atomic: use inline asmHeiko Carstens
Use inline assemblies for atomic_read/set(). This way there shouldn't be any questions or subtle volatile semantics left. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-02-17[S390] correct ipl parameter block safe guardMartin Schwidefsky
The 'output' variable is passed from decompress_kernel to check_ipl_parmblock before it is initialized. That disables the safe guard against the overwrite of the ipl parameter block. Fix this by passing the correct value to check_ipl_parmblock. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-02-17[S390] atomic: use ACCESS_ONCE() for atomic_read()Heiko Carstens
Let's make atomic_read() and atomic_set() behave like on all/most other architectures. Generated code is identical with gcc 4.5.2. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-02-17ARM: S5P: Fix end address in memory resource information for UART devicesThomas Abraham
For S5P platforms, the end address in memory resource information for UART devices is one byte more than the intended value. Fix this by reducing the end address by one byte. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-17ARM: S5P64X0: Cleanup map.h fileKukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-17ARM: S5P6442: Cleanup map.h fileKukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-17ARM: S5PC100: Clenaup map.h fileKukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-17ARM: S5PV210: Cleanup map.h fileKukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-23 15:36:51 +0000