summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2014-11-27ARM: EXYNOS: use u8 for val[] in struct exynos_pmu_confBartlomiej Zolnierkiewicz
Values stored in val[] are never bigger than a byte. text data bss dec hex filename 7716 3692 8 11416 2c98 arch/arm/mach-exynos/pmu.o.before 5436 1908 8 7352 1cb8 arch/arm/mach-exynos/pmu.o.after Cc: Pankaj Dubey <pankaj.dubey@samsung.com> Cc: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-26ARM: at91: remove old at91-specific clock driverNicolas Ferre
This clock driver collection was specific to AT91 and only used in !DT cases. All clocks and the clock trees for all Atmel SoCs are now described by drivers using the common clock framework. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
2014-11-26ARM: at91: remove clock data in at91sam9n12.c and at91sam9x5.c filesNicolas Ferre
As the CONFIG_OLD_CLK_AT91 option is gone, let's completely remove the AT91 old clock driver related data. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
2014-11-27ARM: dts: Remove unused bootargs from exynos3250-rinatoChanwoo Choi
This patch removes unused dt node of command line from Exynos3250-based Rinato board because kernel use the command line from bootloader. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-27ARM: dts: add board dts file for Exynos3250-based Monk boardYoungjun Cho
This patch adds new board dts file to support Samsung Monk board which is based on Exynos3250 SoC and has different H/W configuration from Rinato. This dts file support following features: - eMMC - Main PMIC (Samsung S2MPS14) - Interface PMIC (Maxim MAX77836, MUIC, fuel-gauge, charger) - RTC of Exynos3250 - ADC of Exynos3250 with NTC thermistor - I2S of Exynos3250 - TMU of Exynos3250 - Secure firmware for Exynos3250 secondary cpu boot - Serial ports of Exynos3250 - gpio-key for power key Signed-off-by: Youngjun Cho <yj44.cho@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-26arm64: Move some head.text functions to executable sectionLaura Abbott
The head.text section is intended to be run at early bootup before any of the regular kernel mappings have been setup. Parts of head.text may be freed back into the buddy allocator due to TEXT_OFFSET so for security requirements this memory must not be executable. The suspend/resume/hotplug code path requires some of these head.S functions to run however which means they need to be executable. Support these conflicting requirements by moving the few head.text functions that need to be executable to the text section which has the appropriate page table permissions. Tested-by: Kees Cook <keescook@chromium.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-26arm64: jump labels: NOP out NOP -> NOP replacementMark Rutland
In the arm64 arch_static_branch implementation we place an A64 NOP into the instruction stream and log relevant details to a jump_entry in a __jump_table section. Later this may be replaced with an immediate branch without link to the code for the unlikely case. At init time, the core calls arch_jump_label_transform_static to initialise the NOPs. On x86 this involves inserting the optimal NOP for a given microarchitecture, but on arm64 we only use the architectural NOP, and hence replace each NOP with the exact same NOP. This is somewhat pointless. Additionally, at module load time we don't call jump_label_apply_nops to patch the optimal NOPs in, unlike other architectures, but get away with this because we only use the architectural NOP anyway. A later notifier will patch NOPs with branches as required. Similarly to x86 commit 11570da1c5b1dee1 (x86/jump-label: Do not bother updating NOPs if they are correct), we can avoid patching NOPs with identical NOPs. Given that we only use a single NOP encoding, this means we can NOP-out the body of arch_jump_label_transform_static entirely. As the default __weak arch_jump_label_transform_static implementation performs a patch, we must use an empty function to achieve this. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Laura Abbott <lauraa@codeaurora.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-26arm64: add support to dump the kernel page tablesLaura Abbott
In a similar manner to arm, it's useful to be able to dump the page tables to verify permissions and memory types. Add a debugfs file to check the page tables. Acked-by: Steve Capper <steve.capper@linaro.org> Tested-by: Steve Capper <steve.capper@linaro.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> [will: s/BUFFERABLE/NORMAL-NC/] Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-26ARM: at91: remove all !DT related configuration optionsNicolas Ferre
OLD_CLK_AT91 & OLD_IRQ_AT91 were only selected by entries in Kconfig.non_dt that are now gone. So we remove all this legacy stuff and select the proper options in the SOC_ entries. As USE_OF is now selected directly in arch/arm/Kconfig AT91 entry, we can safely remove it everywhere in this file. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
2014-11-26irqchip: gic-v2m: Add support for ARM GICv2m MSI(-X) doorbellSuravee Suthikulpanit
ARM GICv2m specification extends GICv2 to support MSI(-X) with a new register frame. This allows a GICv2 based system to support MSI with minimal changes. Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> [maz: converted the driver to use stacked irq domains, updated changelog] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1416941243-7181-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-26irqchip: GICv3: ITS: enable compilation of the ITS driverMarc Zyngier
Get the show on the road... Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1416839720-18400-13-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-26arm64: PCI/MSI: Use asm-generic/msi.hMarc Zyngier
In order to support CONFIG_GENERIC_MSI_IRQ_DOMAIN, we need to define msi_alloc_info_t. As the generic version exposed in asm-generic/msi.h is perfectly convenient, import this file as asm/msi.h. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1416839720-18400-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-26ARM: at91/trivial: update Kconfig comment to mention SAMA5Nicolas Ferre
Cortex-A5 SAMA5 processors were not listed, add this in the AT91 comment. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
2014-11-26ARM: at91: always USE_OF from now onNicolas Ferre
As we always use Device Tree now, we can add the configuration here. Also remove the condition for PINCTRL_AT91. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
2014-11-26[media] ARM: dts: meson: add IR receiver nodeBeniamino Galvani
This adds a node for the IR remote control receiver to the Amlogic Meson DTS. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-26kvm: fix kvm_is_mmio_pfn() and rename to kvm_is_reserved_pfn()Ard Biesheuvel
This reverts commit 85c8555ff0 ("KVM: check for !is_zero_pfn() in kvm_is_mmio_pfn()") and renames the function to kvm_is_reserved_pfn. The problem being addressed by the patch above was that some ARM code based the memory mapping attributes of a pfn on the return value of kvm_is_mmio_pfn(), whose name indeed suggests that such pfns should be mapped as device memory. However, kvm_is_mmio_pfn() doesn't do quite what it says on the tin, and the existing non-ARM users were already using it in a way which suggests that its name should probably have been 'kvm_is_reserved_pfn' from the beginning, e.g., whether or not to call get_page/put_page on it etc. This means that returning false for the zero page is a mistake and the patch above should be reverted. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26arm/arm64: kvm: drop inappropriate use of kvm_is_mmio_pfn()Ard Biesheuvel
Instead of using kvm_is_mmio_pfn() to decide whether a host region should be stage 2 mapped with device attributes, add a new static function kvm_is_device_pfn() that disregards RAM pages with the reserved bit set, as those should usually not be mapped as device memory. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26arm64: KVM: Handle traps of ICC_SRE_EL1 as RAZ/WIChristoffer Dall
When running on a system with a GICv3, we currenly don't allow the guest to access the system register interface of the GICv3. We do this by clearing the ICC_SRE_EL2.Enable, which causes all guest accesses to ICC_SRE_EL1 to trap to EL2 and causes all guest accesses to other ICC_ registers to cause an undefined exception in the guest. However, we currently don't handle the trap of guest accesses to ICC_SRE_EL1 and will spill out a warning. The trap just needs to handle the access as RAZ/WI, and a guest that tries to prod this register and set ICC_SRE_EL1.SRE=1, must read back the value (which Linux already does) to see if it succeeded, and will thus observe that ICC_SRE_EL1.SRE was not set. Add the simple trap handler in the sorted table of the system registers. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> [ardb: added cp15 handling] Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26arm64: KVM: fix unmapping with 48-bit VAsMark Rutland
Currently if using a 48-bit VA, tearing down the hyp page tables (which can happen in the absence of a GICH or GICV resource) results in the rather nasty splat below, evidently becasue we access a table that doesn't actually exist. Commit 38f791a4e499792e (arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2) added a pgd_none check to __create_hyp_mappings to account for the additional level of tables, but didn't add a corresponding check to unmap_range, and this seems to be the source of the problem. This patch adds the missing pgd_none check, ensuring we don't try to access tables that don't exist. Original splat below: kvm [1]: Using HYP init bounce page @83fe94a000 kvm [1]: Cannot obtain GICH resource Unable to handle kernel paging request at virtual address ffff7f7fff000000 pgd = ffff800000770000 [ffff7f7fff000000] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc2+ #89 task: ffff8003eb500000 ti: ffff8003eb45c000 task.ti: ffff8003eb45c000 PC is at unmap_range+0x120/0x580 LR is at free_hyp_pgds+0xac/0xe4 pc : [<ffff80000009b768>] lr : [<ffff80000009cad8>] pstate: 80000045 sp : ffff8003eb45fbf0 x29: ffff8003eb45fbf0 x28: ffff800000736000 x27: ffff800000735000 x26: ffff7f7fff000000 x25: 0000000040000000 x24: ffff8000006f5000 x23: 0000000000000000 x22: 0000007fffffffff x21: 0000800000000000 x20: 0000008000000000 x19: 0000000000000000 x18: ffff800000648000 x17: ffff800000537228 x16: 0000000000000000 x15: 000000000000001f x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000020 x11: 0000000000000062 x10: 0000000000000006 x9 : 0000000000000000 x8 : 0000000000000063 x7 : 0000000000000018 x6 : 00000003ff000000 x5 : ffff800000744188 x4 : 0000000000000001 x3 : 0000000040000000 x2 : ffff800000000000 x1 : 0000007fffffffff x0 : 000000003fffffff Process swapper/0 (pid: 1, stack limit = 0xffff8003eb45c058) Stack: (0xffff8003eb45fbf0 to 0xffff8003eb460000) fbe0: eb45fcb0 ffff8003 0009cad8 ffff8000 fc00: 00000000 00000080 00736140 ffff8000 00736000 ffff8000 00000000 00007c80 fc20: 00000000 00000080 006f5000 ffff8000 00000000 00000080 00743000 ffff8000 fc40: 00735000 ffff8000 006d3030 ffff8000 006fe7b8 ffff8000 00000000 00000080 fc60: ffffffff 0000007f fdac1000 ffff8003 fd94b000 ffff8003 fda47000 ffff8003 fc80: 00502b40 ffff8000 ff000000 ffff7f7f fdec6000 00008003 fdac1630 ffff8003 fca0: eb45fcb0 ffff8003 ffffffff 0000007f eb45fd00 ffff8003 0009b378 ffff8000 fcc0: ffffffea 00000000 006fe000 ffff8000 00736728 ffff8000 00736120 ffff8000 fce0: 00000040 00000000 00743000 ffff8000 006fe7b8 ffff8000 0050cd48 00000000 fd00: eb45fd60 ffff8003 00096070 ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd20: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00000000 00000000 fd40: 00000ae0 00000000 006aa25c ffff8000 eb45fd60 ffff8003 0017ca44 00000002 fd60: eb45fdc0 ffff8003 0009a33c ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd80: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00735000 ffff8000 fda0: 006d3090 ffff8000 006aa25c ffff8000 00735000 ffff8000 006d3030 ffff8000 fdc0: eb45fdd0 ffff8003 000814c0 ffff8000 eb45fe50 ffff8003 006aaac4 ffff8000 fde0: 006ddd90 ffff8000 00000006 00000000 006d3000 ffff8000 00000095 00000000 fe00: 006a1e90 ffff8000 00735000 ffff8000 006d3000 ffff8000 006aa25c ffff8000 fe20: 00735000 ffff8000 006d3030 ffff8000 eb45fe50 ffff8003 006fac68 ffff8000 fe40: 00000006 00000006 fe293ee6 ffff8003 eb45feb0 ffff8003 004f8ee8 ffff8000 fe60: 004f8ed4 ffff8000 00735000 ffff8000 00000000 00000000 00000000 00000000 fe80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 fea0: 00000000 00000000 00000000 00000000 00000000 00000000 000843d0 ffff8000 fec0: 004f8ed4 ffff8000 00000000 00000000 00000000 00000000 00000000 00000000 fee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffa0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000005 00000000 ffe0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Call trace: [<ffff80000009b768>] unmap_range+0x120/0x580 [<ffff80000009cad4>] free_hyp_pgds+0xa8/0xe4 [<ffff80000009b374>] kvm_arch_init+0x268/0x44c [<ffff80000009606c>] kvm_init+0x24/0x260 [<ffff80000009a338>] arm_init+0x18/0x24 [<ffff8000000814bc>] do_one_initcall+0x88/0x1a0 [<ffff8000006aaac0>] kernel_init_freeable+0x148/0x1e8 [<ffff8000004f8ee4>] kernel_init+0x10/0xd4 Code: 8b000263 92628479 d1000720 eb01001f (f9400340) ---[ end trace 3bc230562e926fa4 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jungseok Lee <jungseoklee85@gmail.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26mmc: omap_hsmmc: remove unused slot_id parameterAndreas Fenkart
omap_hsmmc only supports one slot. So slot id is always zero, and slot id was never used in the callbacks anyway Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26mmc: omap_hsmmc: remove unnecessary omap_hsmmc_slot_data indirectionAndreas Fenkart
omap_hsmmc supports only one slot per controller, see OMAP_MMC_MAX_SLOTS. This unnecessary indirection leads to confusion in the omap_hsmmc driver. For example the card_detect callback is not installed by platform code but from the driver probe function. So it should be a field of omap_hsmmc_host. But since it is declared under the platform slot while the drivers struct omap_hsmmc_host has no slot abstraction, this looks like a bug, especially when not familiar that this driver only supports 1 slot anyway. Either we should add a slot abstraction to omap_hsmmc_host or remove it from the platform data struct. Removed since slot multiplexing is an un-implemented feature Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26mmc: omap_hsmmc: remove unused get_context_loss_count callbackAndreas Fenkart
trigger of this callback has been removed in 0a82e06e6183 Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26mmc: omap_hsmmc: remove never read power_saving field in omap2_hsmmc_infoAndreas Fenkart
these fields are never read, probably an unimplemented feature or superseded by pm_runtime Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26mmc: omap_hsmmc: remove unused fields in platform_dataAndreas Fenkart
platform data is built from omap2_hsmmc_info, remove all fields that are never set in omap_hsmmc_info, hence never copied to platform data. Note that the omap_hsmmc driver is not affected by this patch those fields were completely unused. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driverAndreas Fenkart
- omap mmc driver supports multiplexing, omap_mmc_hs doesn't this leads to one of the major confusions in the omap_hsmmc driver - platform data should be read-only for the driver most callbacks are not set by the omap3 platform init code while still required. So they are set from the driver probe function, which is against the paradigm that platform-data should not be modified by the driver typical examples are card_detect, read_only callbacks un-bundling by searching for driver name \"omap_hsmmc in the arch/arm folder. omap_hsmmc_platform_data is not initialized directly, but from omap2_hsmmc_info, which is defined in a separate header file not touched by this patch hwmod includes platform headers to declare features of the platform. All the declared features are prefixed OMAP_HSMMC. There is no need to include platform header from hwmod other except for feature defines Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26ARM: OMAP2: MMC: include mmc-omap platform header directlyAndreas Fenkart
Only a few files really need that platform header. When later splitting omap_mmc_platform_data into omap_mmc and omap_mmc_hs, those files declaring an hs mmc platform data will have to change the platform include, which is a good sanity check. Also removing omap242x_init_mmc, which is not used anywhere, checked with grep. Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-26crypto: include crypto- module prefix in templateKees Cook
This adds the module loading prefix "crypto-" to the template lookup as well. For example, attempting to load 'vfat(blowfish)' via AF_ALG now correctly includes the "crypto-" prefix at every level, correctly rejecting "vfat": net-pf-38 algif-hash crypto-vfat(blowfish) crypto-vfat(blowfish)-all crypto-vfat Reported-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-11-26arm64: Add FIX_HOLE to permanent fixed addressesLaura Abbott
Every other architecture with permanent fixed addresses has FIX_HOLE as the first entry. This seems to be designed as a debugging aid but there are a couple of side effects of not having FIX_HOLE: - If the first fixed address is 0, fix_to_virt -> virt_to_fix triggers a BUG_ON for the virtual address being equal to FIXADDR_TOP - fix_to_virt may return a value outside of FIXADDR_START and FIXADDR_TOP which may look like a bug to a developer. Match up with other architectures and make everything clearer by adding FIX_HOLE. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-26ARM: tegra: Move AHB Kconfig to drivers/ambaThierry Reding
This will allow the Kconfig option to be shared among 32-bit and 64-bit ARM. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-26amba: Add Kconfig fileThierry Reding
Rather than duplicate the ARM_AMBA Kconfig symbol in both 32-bit and 64-bit ARM architectures, move the common definition to drivers/amba where dependent drivers will be located. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-26arm: mvebu: normalize pinctrl entries for Armada SoCsArnaud Ebalard
There are currently 2 differents naming conventions used between the existing Armada SoC DT files for pinctrl entries (*_pin(s): *-pin(s) and pmx_*: pmx-*) with a vast majority of files using the former: $ grep _pin arch/arm/boot/dts/armada-*.dts* | wc -l 155 $ grep pmx arch/arm/boot/dts/armada-*.dts* | wc -l 13 In fact, only some Armada XP files are using the second variant. This patch normalizes those files (mainly ge0/1 entries) to use the first variant. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Link: https://lkml.kernel.org/r/00114c3169e1d93259ff4150ed46ee36eae16b1e.1416670812.git.arno@natisbad.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-26arm: mvebu: fix wrongly named DS414 pinctrl entriesArnaud Ebalard
While renaming pinctrl entries during reviews of Synology DS414 support series, I missed three entries, as reported by Ben. This patch fixes those. Reported-by: Ben Peddell <klightspeed@killerwolves.net> Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Link: https://lkml.kernel.org/r/608e4fd6e06e9c5289a84b9c38e81b2456dbcd79.1416670812.git.arno@natisbad.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-26ARM: mvebu: add PHY support to the dts for the USB controllers on Armada 375Gregory CLEMENT
Now that the USB cluster node has been added, use it as a PHY provider for the USB controller linked to it: the first EHCI and the xHCI. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1415879269-29711-7-git-send-email-gregory.clement@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-26ARM: mvebu: add Device Tree description of USB cluster controller on Armada 375Gregory CLEMENT
On Armada 375, the USB cluster allows to control the cluster composed of the USB2 and USB3 host controllers. Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1415879269-29711-6-git-send-email-gregory.clement@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-26Merge tag 'tags/phy-dt-header' into mvebu/dt-usb_phyJason Cooper
shared header file which will be referenced from both PHY driver and its associated Device Tree node(s)
2014-11-26ARM: orion: convert the irq_reg_{readl,writel} calls to the new APIGregory CLEMENT
The commit "genirq: Generic chip: Change irq_reg_{readl,writel} arguments" modified the API. In the same tome the arch/arm/plat-orion/gpio.c file received a fix with the use of the old API: "ARM: orion: Fix for certain sequence of request_irq can cause irq storm". This commit fixes the use of the API. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Olof Johansson <olof@lixom.net> Link: https://lkml.kernel.org/r/1416928752-24529-1-git-send-email-gregory.clement@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-26Merge tag 'tags/mvebu-fixes-3.18' into irqchip/coreJason Cooper
mvebu fixes for v3.18 - Armada XP - Generalize i2c quirk - orion - Fix irq storm caused by specific sequence of request_irq
2014-11-25tty: bfin, define inlined structuresJiri Slaby
struct bfin_serial_port contains structs circ_buf, timer_list, and work_struct directly (not pointers). This means that these structures have to be defined completely to be inlined in struct bfin_serial_port. So instead of struct declarations, define the structures by including proper headers. They were pulled in by linux/serial_core.h or others until now. But experimenting with circ_buf removal from serial_core, struct circ_buf becomes undefined in bfin_serial: In file included from arch/blackfin/kernel/debug-mmrs.c:21:0: arch/blackfin/include/asm/bfin_serial.h:44:18: error: field 'rx_dma_buf' has incomplete type Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26Merge tag 'tags/renesas-dt-du-for-v3.19' into drm/next/adv7511-baseLaurent Pinchart
Renesas ARM Based SoC DT DU Updates for v3.19 * Enable DU using DT on marzen/r8a7779, lager/r8a7790 and koelsch/r8a7791
2014-11-25x86/nmi: Fix use of unallocated cpumask_var_tSasha Levin
Commit "x86/nmi: Perform a safe NMI stack trace on all CPUs" has introduced a cpumask_var_t variable: +static cpumask_var_t printtrace_mask; But never allocated it before using it, which caused a NULL ptr deref when trying to print the stack trace: [ 1110.296154] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1110.296169] IP: __memcpy (arch/x86/lib/memcpy_64.S:151) [ 1110.296178] PGD 4c34b3067 PUD 4c351b067 PMD 0 [ 1110.296186] Oops: 0002 [#1] PREEMPT SMP KASAN [ 1110.296234] Dumping ftrace buffer: [ 1110.296330] (ftrace buffer empty) [ 1110.296339] Modules linked in: [ 1110.296345] CPU: 1 PID: 10538 Comm: trinity-c99 Not tainted 3.18.0-rc5-next-20141124-sasha-00058-ge2a8c09-dirty #1499 [ 1110.296348] task: ffff880152650000 ti: ffff8804c3560000 task.ti: ffff8804c3560000 [ 1110.296357] RIP: __memcpy (arch/x86/lib/memcpy_64.S:151) [ 1110.296360] RSP: 0000:ffff8804c3563870 EFLAGS: 00010246 [ 1110.296363] RAX: 0000000000000000 RBX: ffffe8fff3c4a809 RCX: 0000000000000000 [ 1110.296366] RDX: 0000000000000008 RSI: ffffffff9e254040 RDI: 0000000000000000 [ 1110.296369] RBP: ffff8804c3563908 R08: 0000000000ffffff R09: 0000000000ffffff [ 1110.296371] R10: 0000000000000000 R11: 0000000000000006 R12: 0000000000000000 [ 1110.296375] R13: 0000000000000000 R14: ffffffff9e254040 R15: ffffe8fff3c4a809 [ 1110.296379] FS: 00007f9e43b0b700(0000) GS:ffff880107e00000(0000) knlGS:0000000000000000 [ 1110.296382] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1110.296385] CR2: 0000000000000000 CR3: 00000004e4334000 CR4: 00000000000006a0 [ 1110.296400] Stack: [ 1110.296406] ffffffff81b1e46c 0000000000000000 ffff880107e03fb8 000000000000000b [ 1110.296413] ffff880107dfffc0 ffff880107e03fc0 0000000000000008 ffffffff93f2e9c8 [ 1110.296419] 0000000000000000 ffffda0020fc07f7 0000000000000008 ffff8804c3563901 [ 1110.296420] Call Trace: [ 1110.296429] ? memcpy (mm/kasan/kasan.c:275) [ 1110.296437] ? arch_trigger_all_cpu_backtrace (include/linux/bitmap.h:215 include/linux/cpumask.h:506 arch/x86/kernel/apic/hw_nmi.c:76) [ 1110.296444] arch_trigger_all_cpu_backtrace (include/linux/bitmap.h:215 include/linux/cpumask.h:506 arch/x86/kernel/apic/hw_nmi.c:76) [ 1110.296451] ? dump_stack (./arch/x86/include/asm/preempt.h:95 lib/dump_stack.c:55) [ 1110.296458] do_raw_spin_lock (./arch/x86/include/asm/spinlock.h:86 kernel/locking/spinlock_debug.c:130 kernel/locking/spinlock_debug.c:137) [ 1110.296468] _raw_spin_lock (include/linux/spinlock_api_smp.h:143 kernel/locking/spinlock.c:151) [ 1110.296474] ? __page_check_address (include/linux/spinlock.h:309 mm/rmap.c:630) [ 1110.296481] __page_check_address (include/linux/spinlock.h:309 mm/rmap.c:630) [ 1110.296487] ? preempt_count_sub (kernel/sched/core.c:2615) [ 1110.296493] try_to_unmap_one (include/linux/rmap.h:202 mm/rmap.c:1146) [ 1110.296504] ? anon_vma_interval_tree_iter_next (mm/interval_tree.c:72 mm/interval_tree.c:103) [ 1110.296514] rmap_walk (mm/rmap.c:1653 mm/rmap.c:1725) [ 1110.296521] ? page_get_anon_vma (include/linux/rcupdate.h:423 include/linux/rcupdate.h:935 mm/rmap.c:435) [ 1110.296530] try_to_unmap (mm/rmap.c:1545) [ 1110.296536] ? page_get_anon_vma (mm/rmap.c:437) [ 1110.296545] ? try_to_unmap_nonlinear (mm/rmap.c:1138) [ 1110.296551] ? SyS_msync (mm/rmap.c:1501) [ 1110.296558] ? page_remove_rmap (mm/rmap.c:1409) [ 1110.296565] ? page_get_anon_vma (mm/rmap.c:448) [ 1110.296571] ? anon_vma_ctor (mm/rmap.c:1496) [ 1110.296579] migrate_pages (mm/migrate.c:913 mm/migrate.c:956 mm/migrate.c:1136) [ 1110.296586] ? _raw_spin_unlock_irq (./arch/x86/include/asm/preempt.h:95 include/linux/spinlock_api_smp.h:169 kernel/locking/spinlock.c:199) [ 1110.296593] ? buffer_migrate_lock_buffers (mm/migrate.c:1584) [ 1110.296601] ? handle_mm_fault (mm/memory.c:3163 mm/memory.c:3223 mm/memory.c:3336 mm/memory.c:3365) [ 1110.296607] migrate_misplaced_page (mm/migrate.c:1738) [ 1110.296614] handle_mm_fault (mm/memory.c:3170 mm/memory.c:3223 mm/memory.c:3336 mm/memory.c:3365) [ 1110.296623] __do_page_fault (arch/x86/mm/fault.c:1246) [ 1110.296630] ? vtime_account_user (kernel/sched/cputime.c:701) [ 1110.296638] ? get_parent_ip (kernel/sched/core.c:2559) [ 1110.296646] ? context_tracking_user_exit (kernel/context_tracking.c:144) [ 1110.296656] trace_do_page_fault (arch/x86/mm/fault.c:1329 include/linux/jump_label.h:114 include/linux/context_tracking_state.h:27 include/linux/context_tracking.h:45 arch/x86/mm/fault.c:1330) [ 1110.296664] do_async_page_fault (arch/x86/kernel/kvm.c:280) [ 1110.296670] async_page_fault (arch/x86/kernel/entry_64.S:1285) [ 1110.296755] Code: 08 4c 8b 54 16 f0 4c 8b 5c 16 f8 4c 89 07 4c 89 4f 08 4c 89 54 17 f0 4c 89 5c 17 f8 c3 90 83 fa 08 72 1b 4c 8b 06 4c 8b 4c 16 f8 <4c> 89 07 4c 89 4c 17 f8 c3 66 2e 0f 1f 84 00 00 00 00 00 83 fa All code ======== 0: 08 4c 8b 54 or %cl,0x54(%rbx,%rcx,4) 4: 16 (bad) 5: f0 4c 8b 5c 16 f8 lock mov -0x8(%rsi,%rdx,1),%r11 b: 4c 89 07 mov %r8,(%rdi) e: 4c 89 4f 08 mov %r9,0x8(%rdi) 12: 4c 89 54 17 f0 mov %r10,-0x10(%rdi,%rdx,1) 17: 4c 89 5c 17 f8 mov %r11,-0x8(%rdi,%rdx,1) 1c: c3 retq 1d: 90 nop 1e: 83 fa 08 cmp $0x8,%edx 21: 72 1b jb 0x3e 23: 4c 8b 06 mov (%rsi),%r8 26: 4c 8b 4c 16 f8 mov -0x8(%rsi,%rdx,1),%r9 2b:* 4c 89 07 mov %r8,(%rdi) <-- trapping instruction 2e: 4c 89 4c 17 f8 mov %r9,-0x8(%rdi,%rdx,1) 33: c3 retq 34: 66 2e 0f 1f 84 00 00 nopw %cs:0x0(%rax,%rax,1) 3b: 00 00 00 3e: 83 fa 00 cmp $0x0,%edx Code starting with the faulting instruction =========================================== 0: 4c 89 07 mov %r8,(%rdi) 3: 4c 89 4c 17 f8 mov %r9,-0x8(%rdi,%rdx,1) 8: c3 retq 9: 66 2e 0f 1f 84 00 00 nopw %cs:0x0(%rax,%rax,1) 10: 00 00 00 13: 83 fa 00 cmp $0x0,%edx [ 1110.296760] RIP __memcpy (arch/x86/lib/memcpy_64.S:151) [ 1110.296763] RSP <ffff8804c3563870> [ 1110.296765] CR2: 0000000000000000 Link: http://lkml.kernel.org/r/1416931560-10603-1-git-send-email-sasha.levin@oracle.com Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-25arm64: alternatives: fix pr_fmt string for consistencyWill Deacon
Consistently use the plural form for alternatives pr_fmt strings. Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-25Merge tag 'usb-for-v3.19' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.19 merge window This time, a very pull request with 216 non-merge commits. Most of the commits contained here are sparse or coccinelle fixes ranging from missing 'static' to returning 0 in case of errors. More importantly, we have the removal the now unnecessary 'driver' argument to ->udc_stop(). DWC2 learned about Dual-Role builds. Users of this IP can now have a single driver built for host and device roles. DWC3 got support for two new HW platforms: Exynos7 and AMD. The Broadcom USB 3.0 Device Controller IP is now supported and so is PLX USB338x, which means DWC3 has lost is badge as the only USB 3.0 peripheral IP supported on Linux. Thanks for Tony Lindgren's work, we can now have a distro-like kernel where all MUSB glue layers can be built into the same kernel (statically or dynamically linked) and it'll work in PIO (DMA will come probably on v3.20). Other than these, the usual set of cleanups and non-critical fixes. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-25USB: host: Remove ehci-octeon and ohci-octeon driversAlan Stern
Remove special-purpose octeon drivers and instead use ehci-platform and ohci-platform as suggested with http://marc.info/?l=linux-mips&m=140139694721623&w=2 [andreas.herrmann: fixed compile error] Cc: David Daney <david.daney@cavium.com> Cc: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25arm64: vmlinux.lds.S: don't discard .exit.* sections at link-timeWill Deacon
.exit.* sections may be subject to patching by the new alternatives framework and so shouldn't be discarded at link-time. Without this patch, such a section will result in the following linker error: `.exit.text' referenced in section `.altinstructions' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-25arm64: Factor out fixmap initialization from ioremapLaura Abbott
The fixmap API was originally added for arm64 for early_ioremap purposes. It can be used for other purposes too so move the initialization from ioremap to somewhere more generic. This makes it obvious where the fixmap is being set up and allows for a cleaner implementation of __set_fixmap. Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-25arm64: Move cpu_resume into the text sectionLaura Abbott
The function cpu_resume currently lives in the .data section. There's no reason for it to be there since we can use relative instructions without a problem. Move a few cpu_resume data structures out of the assembly file so the .data annotation can be dropped completely and cpu_resume ends up in the read only text section. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Kees Cook <keescook@chromium.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-25arm64: Switch to adrp for loading the stub vectorsLaura Abbott
The hyp stub vectors are currently loaded using adr. This instruction has a +/- 1MB range for the loading address. If the alignment for sections is changed the address may be more than 1MB away, resulting in reclocation errors. Switch to using adrp for getting the address to ensure we aren't affected by the location of the __hyp_stub_vectors. Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-25arm64: Treat handle_arch_irq as a function pointerLaura Abbott
handle_arch_irq isn't actually text, it's just a function pointer. It doesn't need to be stored in the text section and doing so causes problesm if we ever want to make the kernel text read only. Declare handle_arch_irq as a proper function pointer stored in the data section. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-25arm64: sanity checks: add ID_AA64DFR{0,1}_EL1Mark Rutland
While we currently expect self-hosted debug support to be identical across CPUs, we don't currently sanity check this. This patch adds logging of the ID_AA64DFR{0,1}_EL1 values and associated sanity checking code. It's not clear to me whether we need to check PMUVer, TraceVer, and DebugVer, as we don't currently rely on these fields at all. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-25arm64: sanity checks: add missing newline to printMark Rutland
A missing newline in the WARN_TAINT_ONCE string results in ugly and somewhat difficult to read output in the case of a sanity check failure, as the next print does not appear on a new line: Unsupported CPU feature variation.Modules linked in: This patch adds the missing newline, fixing the output formatting. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 10:30:39 +0000