summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2014-05-02dma: mpc512x: separate 'compatible' values for MPC512x and MPC8308Alexander Popov
MPC512x and MPC8308 have similar DMA controllers, but are independent SoCs. DMA controller driver should have separate 'compatible' values for these SoCs. Signed-off-by: Alexander Popov <a13xp0p0v88@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-30dmaengine: edma: Make reading the position of active channels workThomas Gleixner
As Joel pointed out, edma_read_position() uses memcpy_fromio() to read the parameter ram. That's not synchronized with the internal update as it does a byte by byte copy. We need to do a 32bit read to get a consistent value. Further reading destination and source is pointless. In DEV_TO_MEM transfers we are only interested in the destination, in MEM_TO_DEV we care about the source. In MEM_TO_MEM it really does not matter which one you read. Simple solution: Remove the pointers, select dest/source via a bool and return the read value. Remove the export of this function while at it. The only potential user is the dmaengine and that's always builtin. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-22dmaengine: edma: Set DMA_CYCLIC capability flagPeter Ujfalusi
Indicate that the edma dmaengine driver has support for cyclic mode. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Joel Fernandes <joelf@ti.com> Reviewed-and-Tested-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-22arm: common: edma: Save the number of event queues/TCsPeter Ujfalusi
For later use save the number of queues available for the CC. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Joel Fernandes <joelf@ti.com> Reviewed-and-Tested-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-19Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "This fixes the preemption-count imbalance crash reported by Owen Kibel" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Fix CMCI preemption bugs
2014-04-19Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two kernel side fixes: - an Intel uncore PMU driver potential crash fix - a kprobes/perf-call-graph interaction fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Use rdmsrl_safe() when initializing RAPL PMU kprobes/x86: Fix page-fault handling logic
2014-04-18Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "13 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: thp: close race between split and zap huge pages mm: fix new kernel-doc warning in filemap.c mm: fix CONFIG_DEBUG_VM_RB description mm: use paravirt friendly ops for NUMA hinting ptes mips: export flush_icache_range mm/hugetlb.c: add cond_resched_lock() in return_unused_surplus_pages() wait: explain the shadowing and type inconsistencies Shiraz has moved Documentation/vm/numa_memory_policy.txt: fix wrong document in numa_memory_policy.txt powerpc/mm: fix ".__node_distance" undefined kernel/watchdog.c:touch_softlockup_watchdog(): use raw_cpu_write() init/Kconfig: move the trusted keyring config option to general setup vmscan: reclaim_clean_pages_from_list() must use mod_zone_page_state()
2014-04-18mips: export flush_icache_rangeKees Cook
The lkdtm module performs tests against executable memory ranges, so it needs to flush the icache for proper behaviors. Other architectures already export this, so do the same for MIPS. [akpm@linux-foundation.org: relocate export sites] Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Sanjay Lal <sanjayl@kymasys.com> Cc: John Crispin <blogic@openwrt.org> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18Shiraz has movedViresh Kumar
shiraz.hashim@st.com email-id doesn't exist anymore as he has left the company. Replace ST's id with shiraz.linux.kernel@gmail.com. It also updates .mailmap file to fix address for 'git shortlog'. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18powerpc/mm: fix ".__node_distance" undefinedMike Qiu
CHK include/config/kernel.release CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h ... Building modules, stage 2. WARNING: 1 bad relocations c0000000013d6a30 R_PPC64_ADDR64 uprobes_fetch_type_table WRAP arch/powerpc/boot/zImage.pseries WRAP arch/powerpc/boot/zImage.epapr MODPOST 1849 modules ERROR: ".__node_distance" [drivers/block/nvme.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 make: *** Waiting for unfinished jobs.... The reason is symbol "__node_distance" not been exported in powerpc. Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Jesse Larrew <jlarrew@linux.vnet.ibm.com> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Alistair Popple <alistair@popple.id.au> Cc: Mike Qiu <qiudayu@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18ARC: Delete stale barrier.hVineet Gupta
Commit 93ea02bb8435 ("arch: Clean up asm/barrier.h implementations") wired generic barrier.h for ARC, but failed to delete the existing file. In 3.15, due to rcupdate.h updates, this causes a build breakage on ARC: CC arch/arc/kernel/asm-offsets.s In file included from include/linux/sched.h:45:0, from arch/arc/kernel/asm-offsets.c:9: include/linux/rculist.h: In function __list_add_rcu: include/linux/rculist.h:54:2: error: implicit declaration of function smp_store_release [-Werror=implicit-function-declaration] rcu_assign_pointer(list_next_rcu(prev), new); ^ Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18Merge tag 'pci-v3.15-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "These are fixes for a powerpc NULL pointer dereference, an OF interrupt mapping issue on some of the new host bridges, and a DesignWare iATU issue. Host bridge drivers - Fix OF interrupt mapping for DesignWare, R-Car, Tegra (Lucas Stach) - Fix DesignWare iATU programming (Mohit Kumar) Miscellaneous - Fix powerpc NULL dereference from list_for_each_entry() update (Mike Qiu)" * tag 'pci-v3.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: tegra: Use new OF interrupt mapping when possible PCI: rcar: Use new OF interrupt mapping when possible PCI: designware: Use new OF interrupt mapping when possible PCI: designware: Fix iATU programming for cfg1, io and mem viewport PCI: designware: Fix comment for setting number of lanes powerpc/PCI: Fix NULL dereference in sys_pciconfig_iobase() list traversal
2014-04-18perf/x86/intel: Use rdmsrl_safe() when initializing RAPL PMUVenkatesh Srinivas
CPUs which should support the RAPL counters according to Family/Model/Stepping may still issue #GP when attempting to access the RAPL MSRs. This may happen when Linux is running under KVM and we are passing-through host F/M/S data, for example. Use rdmsrl_safe to first access the RAPL_POWER_UNIT MSR; if this fails, do not attempt to use this PMU. Signed-off-by: Venkatesh Srinivas <venkateshs@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1394739386-22260-1-git-send-email-venkateshs@google.com Cc: zheng.z.yan@intel.com Cc: eranian@google.com Cc: ak@linux.intel.com Cc: linux-kernel@vger.kernel.org [ The patch also silently fixes another bug: rapl_pmu_init() didn't handle the memory alloc failure case previously. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17Merge branch 'parisc-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "There are two major changes in this patchset: The major fix is that the epoll_pwait() syscall for 32bit userspace was not using the compat wrapper on a 64bit kernel. Secondly we changed the value of SHMLBA from 4MB to PAGE_SIZE to reflect that we can actually mmap to any multiple of PAGE_SIZE. The only thing which needs care is that shared mmaps need to be mapped at the same offset inside the 4MB cache window" * 'parisc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix epoll_pwait syscall on compat kernel parisc: change value of SHMLBA from 0x00400000 to PAGE_SIZE parisc: Replace __get_cpu_var uses for address calculation
2014-04-17Merge tag 'stable/for-linus-3.15-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen fixes from David Vrabel: "Xen regression and bug fixes for 3.15-rc1: - fix completely broken 32-bit PV guests caused by x86 refactoring 32-bit thread_info. - only enable ticketlock slow path on Xen (not bare metal) - fix two bugs with PV guests not shutting down when requested - fix a minor memory leak in xen-pciback error path" * tag 'stable/for-linus-3.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/manage: Poweroff forcefully if user-space is not yet up. xen/xenbus: Avoid synchronous wait on XenBus stalling shutdown/restart. xen/spinlock: Don't enable them unconditionally. xen-pciback: silence an unwanted debug printk xen: fix memory leak in __xen_pcibk_add_pci_dev() x86/xen: Fix 32-bit PV guests's usage of kernel_stack
2014-04-17kprobes/x86: Fix page-fault handling logicMasami Hiramatsu
Current kprobes in-kernel page fault handler doesn't expect that its single-stepping can be interrupted by an NMI handler which may cause a page fault(e.g. perf with callback tracing). In that case, the page-fault handled by kprobes and it misunderstands the page-fault has been caused by the single-stepping code and tries to recover IP address to probed address. But the truth is the page-fault has been caused by the NMI handler, and do_page_fault failes to handle real page fault because the IP address is modified and causes Kernel BUGs like below. ---- [ 2264.726905] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 2264.727190] IP: [<ffffffff813c46e0>] copy_user_generic_string+0x0/0x40 To handle this correctly, I fixed the kprobes fault handler to ensure the faulted ip address is its own single-step buffer instead of checking current kprobe state. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Sandeepa Prabhu <sandeepa.prabhu@linaro.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: fche@redhat.com Cc: systemtap@sourceware.org Link: http://lkml.kernel.org/r/20140417081644.26341.52351.stgit@ltc230.yrl.intra.hitachi.co.jp Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17x86/mce: Fix CMCI preemption bugsIngo Molnar
The following commit: 27f6c573e0f7 ("x86, CMCI: Add proper detection of end of CMCI storms") Added two preemption bugs: - machine_check_poll() does a get_cpu_var() without a matching put_cpu_var(), which causes preemption imbalance and crashes upon bootup. - it does percpu ops without disabling preemption. Preemption is not disabled due to the mistaken use of a raw spinlock. To fix these bugs fix the imbalance and change cmci_discover_lock to a regular spinlock. Reported-by: Owen Kibel <qmewlo@gmail.com> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Chen, Gong <gong.chen@linux.intel.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Todorov <atodorov@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/n/tip-jtjptvgigpfkpvtQxpEk1at2@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> -- arch/x86/kernel/cpu/mcheck/mce.c | 4 +--- arch/x86/kernel/cpu/mcheck/mce_intel.c | 18 +++++++++--------- 2 files changed, 10 insertions(+), 12 deletions(-)
2014-04-16Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Various fixes: - reboot regression fix - build message spam fix - GPU quirk fix - 'make kvmconfig' fix plus the wire-up of the renameat2() system call on i386" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Remove the PCI reboot method from the default chain x86/build: Supress "Nothing to be done for ..." messages x86/gpu: Fix sign extension issue in Intel graphics stolen memory quirks x86/platform: Fix "make O=dir kvmconfig" i386: Wire up the renameat2() syscall
2014-04-16Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Tooling fixes, plus a simple hardware-enablement patch for the Intel RAPL PMU (energy use measurement) on Haswell CPUs, which I hope is still fine at this stage" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Instead of redirecting flex output, use -o perf tools: Fix double free in perf test 21 (code-reading.c) perf stat: Initialize statistics correctly perf bench: Set more defaults in the 'numa' suite perf bench: Fix segfault at the end of an 'all' execution perf bench: Update manpage to mention numa and futex perf probe: Use dwarf_getcfi_elf() instead of dwarf_getcfi() perf probe: Fix to handle errors in line_range searching perf probe: Fix --line option behavior perf tools: Pick up libdw without explicit LIBDW_DIR MAINTAINERS: Change e-mail to kernel.org one perf callchains: Disable unwind libraries when libelf isn't found tools lib traceevent: Do not call warning() directly tools lib traceevent: Print event name when show warning if possible perf top: Fix documentation of invalid -s option perf/x86: Enable DRAM RAPL support on Intel Haswell
2014-04-16Merge tag 'pinctrl-v3.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pincontrol fixes from Linus Walleij: "A first set of pin control fixes for the v3.15 series: - Fix a couple of barnsjukdomar on the Rockchip driver. - Remove an idiotic debug print I happened to leave behind in the Nomadik driver. - Fixup the Qualcomm MSM interrupt handling code for the TLMM v2. - Three patches renaming the Broadcom Capri driver to BCM28155. This has been falling between the chairs for some time due to some cross-tree synchronization misunderstandings, now I'm fed up with this and just rename it in this -rc1 phase" * tag 'pinctrl-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: fix typo in bindings documentation Update bcm_defconfig with new pinctrl CONFIG pinctrl: Rename Broadcom Capri pinctrl driver pinctrl: msm: Correct interrupt code for TLMM v2 pinctrl: nomadik: delete stray debug print pinctrl: rockchip: handle first half of rk3188-bank0 correctly pinctrl: rockchip: add return value to rockchip_set_mux pinctrl: rockchip: fix offset of mux registers for rk3188
2014-04-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "An update to the oops output with additional information about the crash. The renameat2 system call is enabled. Two patches in regard to the PTR_ERR_OR_ZERO cleanup. And a bunch of bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/sclp_cmd: replace PTR_RET with PTR_ERR_OR_ZERO s390/sclp: replace PTR_RET with PTR_ERR_OR_ZERO s390/sclp_vt220: Fix kernel panic due to early terminal input s390/compat: fix typo s390/uaccess: fix possible register corruption in strnlen_user_srst() s390: add 31 bit warning message s390: wire up sys_renameat2 s390: show_registers() should not map user space addresses to kernel symbols s390/mm: print control registers and page table walk on crash s390/smp: fix smp_stop_cpu() for !CONFIG_SMP s390: fix control register update
2014-04-16Merge tag 'please-pull-ia64-erratum' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull itanium erratum fix from Tony Luck: "Small workaround for a rare, but annoying, erratum #237" * tag 'please-pull-ia64-erratum' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Change default PSR.ac from '1' to '0' (Fix erratum #237)
2014-04-16[IA64] Change default PSR.ac from '1' to '0' (Fix erratum #237)Tony Luck
April 2014 Itanium processor specification update: http://www.intel.com/content/www/us/en/processors/itanium/itanium-specification-update.html describes this erratum: ========================================================================= 237. Under a complex set of conditions, store to load forwarding for a sub 8-byte load may complete incorrectly Problem: A load instruction may complete incorrectly when a code sequence using 4-byte or smaller load and store operations to the same address is executed in combination with specific timing of all the following concurrent conditions: store to load forwarding, alignment checking enabled, a mis-predicted branch, and complex cache utilization activity. Implication: The affected sub 8-byte instruction may complete incorrectly resulting in unpredictable system behavior. There is an extremely low probability of exposure due to the significant number of complex microarchitectural concurrent conditions required to encounter the erratum. Workaround: Set PSR.ac = 0 to completely avoid the erratum. Disabling Hyper-Threading will significantly reduce exposure to the conditions that contribute to encountering the erratum. Status: See the Summary Table of Changes for the affected steppings. ========================================================================= [Table of changes essentially lists all models from McKinley to Tukwila] The PSR.ac bit controls whether the processor will always generate an unaligned reference trap (0x5a00) for a misaligned data access (when PSR.ac=1) or if it will let the access succeed when running on a cpu that implements logic to handle some unaligned accesses. Way back in 2008 in commit b704882e70d87d7f56db5ff17e2253f3fa90e4f3 [IA64] Rationalize kernel mode alignment checking we made the decision to always enable strict checking. We were already doing so in trap/interrupt context because the common preamble code set this bit - but the rest of supervisor code (and by inheritance user code) ran with PSR.ac=0. We now reverse that decision and set PSR.ac=0 everywhere in the kernel (also inherited by user processes). This will avoid the erratum using the method described in the Itanium specification update. Net effect for users is that the processor will handle unaligned access when it can (typically with a tiny performance bubble in the pipeline ... but much less invasive than taking a trap and having the OS perform the access). Signed-off-by: Tony Luck <tony.luck@intel.com>
2014-04-16x86: Remove the PCI reboot method from the default chainIngo Molnar
Steve reported a reboot hang and bisected it back to this commit: a4f1987e4c54 x86, reboot: Add EFI and CF9 reboot methods into the default list He heroically tested all reboot methods and found the following: reboot=t # triple fault ok reboot=k # keyboard ctrl FAIL reboot=b # BIOS ok reboot=a # ACPI FAIL reboot=e # EFI FAIL [system has no EFI] reboot=p # PCI 0xcf9 FAIL And I think it's pretty obvious that we should only try PCI 0xcf9 as a last resort - if at all. The other observation is that (on this box) we should never try the PCI reboot method, but close with either the 'triple fault' or the 'BIOS' (terminal!) reboot methods. Thirdly, CF9_COND is a total misnomer - it should be something like CF9_SAFE or CF9_CAREFUL, and 'CF9' should be 'CF9_FORCE' ... So this patch fixes the worst problems: - it orders the actual reboot logic to follow the reboot ordering pattern - it was in a pretty random order before for no good reason. - it fixes the CF9 misnomers and uses BOOT_CF9_FORCE and BOOT_CF9_SAFE flags to make the code more obvious. - it tries the BIOS reboot method before the PCI reboot method. (Since 'BIOS' is a terminal reboot method resulting in a hang if it does not work, this is essentially equivalent to removing the PCI reboot method from the default reboot chain.) - just for the miraculous possibility of terminal (resulting in hang) reboot methods of triple fault or BIOS returning without having done their job, there's an ordering between them as well. Reported-and-bisected-and-tested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Li Aubrey <aubrey.li@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Link: http://lkml.kernel.org/r/20140404064120.GB11877@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-15xen/spinlock: Don't enable them unconditionally.Konrad Rzeszutek Wilk
The git commit a945928ea2709bc0e8e8165d33aed855a0110279 ('xen: Do not enable spinlocks before jump_label_init() has executed') was added to deal with the jump machinery. Earlier the code that turned on the jump label was only called by Xen specific functions. But now that it had been moved to the initcall machinery it gets called on Xen, KVM, and baremetal - ouch!. And the detection machinery to only call it on Xen wasn't remembered in the heat of merge window excitement. This means that the slowpath is enabled on baremetal while it should not be. Reported-by: Waiman Long <waiman.long@hp.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> CC: stable@vger.kernel.org CC: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-04-15x86/xen: Fix 32-bit PV guests's usage of kernel_stackBoris Ostrovsky
Commit 198d208df4371734ac4728f69cb585c284d20a15 ("x86: Keep thread_info on thread stack in x86_32") made 32-bit kernels use kernel_stack to point to thread_info. That change missed a couple of updates needed by Xen's 32-bit PV guests: 1. kernel_stack needs to be initialized for secondary CPUs 2. GET_THREAD_INFO() now uses %fs register which may not be the kernel's version when executing xen_iret(). With respect to the second issue, we don't need GET_THREAD_INFO() anymore: we used it as an intermediate step to get to per_cpu xen_vcpu and avoid referencing %fs. Now that we are going to use %fs anyway we may as well go directly to xen_vcpu. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-04-14Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Marcelo Tosatti: - Fix for guest triggerable BUG_ON (CVE-2014-0155) - CR4.SMAP support - Spurious WARN_ON() fix * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: remove WARN_ON from get_kernel_ns() KVM: Rename variable smep to cr4_smep KVM: expose SMAP feature to guest KVM: Disable SMAP for guests in EPT realmode and EPT unpaging mode KVM: Add SMAP support when setting CR4 KVM: Remove SMAP bit from CR4_RESERVED_BITS KVM: ioapic: try to recover if pending_eoi goes out of range KVM: ioapic: fix assignment of ioapic->rtc_status.pending_eoi (CVE-2014-0155)
2014-04-14powerpc/PCI: Fix NULL dereference in sys_pciconfig_iobase() list traversalMike Qiu
3bc955987fb3 ("powerpc/PCI: Use list_for_each_entry() for bus traversal") caused a NULL pointer dereference because the loop body set the iterator to NULL: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc000000000041d78 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c000000000041d78] .sys_pciconfig_iobase+0x68/0x1f0 LR [c000000000041e0c] .sys_pciconfig_iobase+0xfc/0x1f0 Call Trace: [c0000003b4787db0] [c000000000041e0c] .sys_pciconfig_iobase+0xfc/0x1f0 (unreliable) [c0000003b4787e30] [c000000000009ed8] syscall_exit+0x0/0x98 Fix it by using a temporary variable for the iterator. [bhelgaas: changelog, drop tmp_bus initialization] Fixes: 3bc955987fb3 powerpc/PCI: Use list_for_each_entry() for bus traversal Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-04-14KVM: x86: remove WARN_ON from get_kernel_ns()Marcelo Tosatti
Function and callers can be preempted. https://bugzilla.kernel.org/show_bug.cgi?id=73721 Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-14KVM: Rename variable smep to cr4_smepFeng Wu
Rename variable smep to cr4_smep, which can better reflect the meaning of the variable. Signed-off-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-14KVM: expose SMAP feature to guestFeng Wu
This patch exposes SMAP feature to guest Signed-off-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-14KVM: Disable SMAP for guests in EPT realmode and EPT unpaging modeFeng Wu
SMAP is disabled if CPU is in non-paging mode in hardware. However KVM always uses paging mode to emulate guest non-paging mode with TDP. To emulate this behavior, SMAP needs to be manually disabled when guest switches to non-paging mode. Signed-off-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-14KVM: Add SMAP support when setting CR4Feng Wu
This patch adds SMAP handling logic when setting CR4 for guests Thanks a lot to Paolo Bonzini for his suggestion to use the branchless way to detect SMAP violation. Signed-off-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-14KVM: Remove SMAP bit from CR4_RESERVED_BITSFeng Wu
This patch removes SMAP bit from CR4_RESERVED_BITS. Signed-off-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-14Merge tag 'v3.15-rc1' into perf/urgentIngo Molnar
Pick up the latest fixes. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-14x86/build: Supress "Nothing to be done for ..." messagesMasahiro Yamada
When we build an already built kernel again, arch/x86/syscalls/Makefile and arch/x86/tools/Makefile emits "Nothing to be done for ..." messages. Here is the command log: $ make defconfig [ snip ] $ make [ snip ] $ make make[1]: Nothing to be done for `all'. <----- make[1]: Nothing to be done for `relocs'. <----- CHK include/config/kernel.release CHK include/generated/uapi/linux/version.h Besides not emitting those, "all" and "relocs" should be added to PHONY as well. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Peter Foley <pefoley2@pefoley.com> Acked-by: Michal Marek <mmarek@suse.cz> Link: http://lkml.kernel.org/r/1397093742-11144-1-git-send-email-yamada.m@jp.panasonic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-14Update bcm_defconfig with new pinctrl CONFIGSherman Yin
To be consistent with other Broadcom drivers, the Broadcom Capri pinctrl driver and its related CONFIG option are renamed to bcm281xx. This commit updates the defconfig that enables the pinctrl driver. Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-14x86/gpu: Fix sign extension issue in Intel graphics stolen memory quirksVille Syrjälä
Have the KB(),MB(),GB() macros produce unsigned longs to avoid unintended sign extension issues with the gen2 memory size detection. What happens is first the uint8_t returned by read_pci_config_byte() gets promoted to an int which gets multiplied by another int from the MB() macro, and finally the result gets sign extended to size_t. Although this shouldn't be a problem in practice as all affected gen2 platforms are 32bit AFAIK, so size_t will be 32 bits. Reported-by: Bjorn Helgaas <bhelgaas@google.com> Suggested-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1397382303-17525-1-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-14x86/platform: Fix "make O=dir kvmconfig"Antonio Borneo
Running: make O=dir x86_64_defconfig make O=dir kvmconfig the second command dirties the source tree with file ".config", symlink "source" and objects in folder "scripts". Fixed by using properly prefixed paths in the arch Makefile. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Acked-by: Borislav Petkov <bp@suse.de> Cc: Pekka Enberg <penberg@kernel.org> Link: http://lkml.kernel.org/r/1397377568-8375-1-git-send-email-borneo.antonio@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-13parisc: fix epoll_pwait syscall on compat kernelHelge Deller
This bug was detected with the libio-epoll-perl debian package where the test case IO-Ppoll-compat.t failed. Signed-off-by: Helge Deller <deller@gmx.de> CC: stable@kernel.org # 3.0+
2014-04-13parisc: change value of SHMLBA from 0x00400000 to PAGE_SIZEHelge Deller
On parisc, SHMLBA was defined to 0x00400000 (4MB) to reflect that we need to take care of our caches for shared mappings. But actually, we can map a file at any multiple address of PAGE_SIZE, so let us correct that now with a value of PAGE_SIZE for SHMLBA. Instead we now take care of this cache colouring via the constant SHM_COLOUR while we map shared pages. Signed-off-by: Helge Deller <deller@gmx.de> CC: Jeroen Roovers <jer@gentoo.org> CC: John David Anglin <dave.anglin@bell.net> CC: Carlos O'Donell <carlos@systemhalted.org> Cc: stable@kernel.org [3.13+]
2014-04-12powerpc: Don't try to set LPCR unless we're in hypervisor modePaul Mackerras
Commit 8f619b5429d9 ("powerpc/ppc64: Do not turn AIL (reloc-on interrupts) too early") added code to set the AIL bit in the LPCR without checking whether the kernel is running in hypervisor mode. The result is that when the kernel is running as a guest (i.e., under PowerKVM or PowerVM), the processor takes a privileged instruction interrupt at that point, causing a panic. The visible result is that the kernel hangs after printing "returning from prom_init". This fixes it by checking for hypervisor mode being available before setting LPCR. If we are not in hypervisor mode, we enable relocation-on interrupts later in pSeries_setup_arch using the H_SET_MODE hcall. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-12Merge tag 'blackfin-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux Pull blackfin updates from Steven Miao: "Code cleanup, some previously ignored patches, and bug fixes" * tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux: blackfin: cleanup board files bf609: clock: drop unused clock bit set/clear functions Blackfin: bf537: rename "CONFIG_ADT75" Blackfin: bf537: rename "CONFIG_AD7314" Blackfin: bf537: rename ad2s120x ->ad2s1200 blackfin: bf537: fix typo "CONFIG_SND_SOC_ADV80X_MODULE" blackfin: dma: current count mmr is read only bfin_crc: Move architecture independant crc header file out of the blackfin folder. bf54x: drop unuesd HOST status,control,timeout registers bit define macros blackfin: portmux: cleanup head file Blackfin: remove "config IP_CHECKSUM_L1" blackfin: Remove GENERIC_GPIO config option again blackfin:Use generic /proc/interrupts implementation blackfin: bf60x: fix typo "CONFIG_PM_BFIN_WAKE_PA15_POL"
2014-04-12Merge tag 'llvmlinux-for-v3.15' of ↵Linus Torvalds
git://git.linuxfoundation.org/llvmlinux/kernel Pull llvm patches from Behan Webster: "These are some initial updates to support compiling the kernel with clang. These patches have been through the proper reviews to the best of my ability, and have been soaking in linux-next for a few weeks. These patches by themselves still do not completely allow clang to be used with the kernel code, but lay the foundation for other patches which are still under review. Several other of the LLVMLinux patches have been already added via maintainer trees" * tag 'llvmlinux-for-v3.15' of git://git.linuxfoundation.org/llvmlinux/kernel: x86: LLVMLinux: Fix "incomplete type const struct x86cpu_device_id" x86 kbuild: LLVMLinux: More cc-options added for clang x86, acpi: LLVMLinux: Remove nested functions from Thinkpad ACPI LLVMLinux: Add support for clang to compiler.h and new compiler-clang.h LLVMLinux: Remove warning about returning an uninitialized variable kbuild: LLVMLinux: Fix LINUX_COMPILER definition script for compilation with clang Documentation: LLVMLinux: Update Documentation/dontdiff kbuild: LLVMLinux: Adapt warnings for compilation with clang kbuild: LLVMLinux: Add Kbuild support for building kernel with Clang
2014-04-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "The first vfs pile, with deep apologies for being very late in this window. Assorted cleanups and fixes, plus a large preparatory part of iov_iter work. There's a lot more of that, but it'll probably go into the next merge window - it *does* shape up nicely, removes a lot of boilerplate, gets rid of locking inconsistencie between aio_write and splice_write and I hope to get Kent's direct-io rewrite merged into the same queue, but some of the stuff after this point is having (mostly trivial) conflicts with the things already merged into mainline and with some I want more testing. This one passes LTP and xfstests without regressions, in addition to usual beating. BTW, readahead02 in ltp syscalls testsuite has started giving failures since "mm/readahead.c: fix readahead failure for memoryless NUMA nodes and limit readahead pages" - might be a false positive, might be a real regression..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) missing bits of "splice: fix racy pipe->buffers uses" cifs: fix the race in cifs_writev() ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure kill generic_file_buffered_write() ocfs2_file_aio_write(): switch to generic_perform_write() ceph_aio_write(): switch to generic_perform_write() xfs_file_buffered_aio_write(): switch to generic_perform_write() export generic_perform_write(), start getting rid of generic_file_buffer_write() generic_file_direct_write(): get rid of ppos argument btrfs_file_aio_write(): get rid of ppos kill the 5th argument of generic_file_buffered_write() kill the 4th argument of __generic_file_aio_write() lustre: don't open-code kernel_recvmsg() ocfs2: don't open-code kernel_recvmsg() drbd: don't open-code kernel_recvmsg() constify blk_rq_map_user_iov() and friends lustre: switch to kernel_sendmsg() ocfs2: don't open-code kernel_sendmsg() take iov_iter stuff to mm/iov_iter.c process_vm_access: tidy up a bit ...
2014-04-12Merge git://git.infradead.org/users/eparis/auditLinus Torvalds
Pull audit updates from Eric Paris. * git://git.infradead.org/users/eparis/audit: (28 commits) AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERIC audit: renumber AUDIT_FEATURE_CHANGE into the 1300 range audit: do not cast audit_rule_data pointers pointlesly AUDIT: Allow login in non-init namespaces audit: define audit_is_compat in kernel internal header kernel: Use RCU_INIT_POINTER(x, NULL) in audit.c sched: declare pid_alive as inline audit: use uapi/linux/audit.h for AUDIT_ARCH declarations syscall_get_arch: remove useless function arguments audit: remove stray newline from audit_log_execve_info() audit_panic() call audit: remove stray newlines from audit_log_lost messages audit: include subject in login records audit: remove superfluous new- prefix in AUDIT_LOGIN messages audit: allow user processes to log from another PID namespace audit: anchor all pid references in the initial pid namespace audit: convert PPIDs to the inital PID namespace. pid: get pid_t ppid of task in init_pid_ns audit: rename the misleading audit_get_context() to audit_take_context() audit: Add generic compat syscall support audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL ...
2014-04-12blackfin: cleanup board filesSteven Miao
using IS_ENABLED() macro instead of defined(CONFIG_XXX) || defined(CONFIG_XXX_MODULE) Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-04-12bf609: clock: drop unused clock bit set/clear functionsSteven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-04-12Blackfin: bf537: rename "CONFIG_ADT75"Paul Bolle
In v3.2 the Analog Devices ADT75 temperature sensor driver was removed as an IIO driver and support for it was added to the LM75 HWMON driver. But it was apparently overlooked to rename one reference to CONFIG_ADT75 to CONFIG_SENSORS_LM75. Do so now. Use the IS_ENABLED() macro, while we're at it. Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
2014-04-12Blackfin: bf537: rename "CONFIG_AD7314"Paul Bolle
In v3.2 the Analog Devices AD7314 temperature sensor driver was removed as an IIO driver and added as a HWMON driver. But it was apparently overlooked to rename two references to CONFIG_AD7314 to CONFIG_SENSORS_AD7314. Do so now. Use the IS_ENABLED() macro, while we're at it. Signed-off-by: Paul Bolle <pebolle@tiscali.nl>