summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2012-03-15ARM: at91: add Shutdown Controller (SHDWC) DT supportJean-Christophe PLAGNIOL-VILLARD
Use a string to specific the wakeup mode to make it more readable. Add the Real-time Clock Wake-up support too for sam9g45 and sam9x5. Add AT91_SHDW_CPTWK0_MAX to specific the Max of the Wakeup Counter. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: add ram controller DT supportJean-Christophe PLAGNIOL-VILLARD
We can now drop the call to ioremap_registers() as we have the binding for the SDRAM/DDR Controller. Drop ioremap_registers() for sam9x5 too. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: add RSTC (Reset Controller) dt supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: always enable sam9 restartJean-Christophe PLAGNIOL-VILLARD
This is need for multiple SoC in the same kernel image and DT. As we will chose the restart function via binding. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: add pmc DT supportJean-Christophe PLAGNIOL-VILLARD
Specified the main Oscillator via clock binding. This will allow to do not hardcode it anymore in the DT board at 12MHz. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91/dt: add specific DT soc initJean-Christophe PLAGNIOL-VILLARD
This will allow to have static Device mapping and DT probe mapping for the System Controller. Temporary keep the call to ioremap_registers() until we have the binding for the SDRAM/DDR Controller. Temporary keep the main clock hardcoded to 12MHz until we have the binding for the PMC. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91/dt: add Calao DAB-MMX daugther board support for USB-A9G20Jean-Christophe PLAGNIOL-VILLARD
http://www.calao-systems.com/articles.php?lng=en&pg=6099 this daughter board add the following device: - Micro-SD socket - TTL 3V3 - (Tx/Rx/RTS/CTS) - I2C port - 0.96" Serial OLED Display Module (over UART) - MP3 decoder with Micro & Speakers - 4x PB, 4x Leds (Blue), 3x Leds (Green, Orange, Red) for now we add only the 2 UARTs, 4 Buttons, 7 leds and i2c via DT used_led1 will not be re-add via DT as it's used by the motherboard too Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-03-15ARM: at91: sam9x5 add i2c DT supportJean-Christophe PLAGNIOL-VILLARD
For now on use i2c-gpio driver on the same pin as the hardware IP. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: sam9g45 add i2c DT supportJean-Christophe PLAGNIOL-VILLARD
For now on use i2c-gpio driver on the same pin as the hardware IP. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: usb_a9g20 add DT i2c supportJean-Christophe PLAGNIOL-VILLARD
Use i2c-gpio and enable rv3029 RTC. Enable the rtc in the sam9g20 defconfig. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: sam9g20 add i2c DT supportJean-Christophe PLAGNIOL-VILLARD
For now on use i2c-gpio driver on the same pin as the hardware IP. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: sam9x5 add nand supportJean-Christophe PLAGNIOL-VILLARD
Enable the nand in the cpu module with the partition. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-03-15atmel/nand: add DT supportJean-Christophe PLAGNIOL-VILLARD
Use a local copy of board informatin and fill with DT data. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: enable on flash bbt for Atmel Reference and DT boardsJean-Christophe PLAGNIOL-VILLARD
Enable it on Calao board too as they are in DT too. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-03-15ATMEL: fix nand ecc supportJean-Christophe PLAGNIOL-VILLARD
So we can now choose for the board the ecc mode (ecc soft, soft bch, no ecc and hardware). Set ecc mode in the boards to soft as currently in the driver. Move platform data to a common header include/linux/platform_data/atmel_nand.h Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: David Woodhouse <dwmw2@infradead.org>
2012-03-01ARM: at91: at91sam9x5cm/dt: add leds supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-01ARM: at91: usb_a9g20/dt: add gpio-keys supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-01ARM: at91: at91sam9m10g45ek/dt: add gpio-keys supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-01ARM: at91: at91sam9m10g45ek/dt: add leds supportJean-Christophe PLAGNIOL-VILLARD
Use the gpio for d7 as we do not support yet the pwm led via dt. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-01ARM: at91: usb_a9g20/dt: add leds supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-01ARM: at91/pio: add new PIO3 featuresNicolas Ferre
This patch adds the support for new PIO controller found on some at91sam SOCs. - more peripheral multiplexing - more features to configure on a PIO (pull-down, Schmitt trigger, debouncer) - support for several IRQ triggering features (type and polarity) Support for those new features are retrieved from the device tree compatibility string. Debugfs at91_gpio file is updated to monitor configuration. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-01ARM: at91: add sam9_smc.o to at91sam9x5 buildNicolas Ferre
Add these SMC accessors to the at91sam9x5 as we will need them for NAND flash (for instance). Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-01ARM: at91/tc: add device tree support to atmel_tclibNicolas Ferre
Device tree support added to atmel_tclib: the generic Timer Counter library. This is used by the clocksource/clockevent driver tcb_clksrc. The current DT enabled platforms are also modified to use it: - .dtsi files are modified to add Timer Counter Block entries - alias are created to allow identification of each block - clkdev lookup tables are added for clocks identification. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-01ARM: at91/tclib: take iomem size from resourceNicolas Ferre
Requesting iomem region and ioremaping is now done using the resource size specified instead of a constant value. Each <SoC>_device.c file is modified accordingly to reflect actual user interface size. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-03-01ARM: at91/pit: add traces in case of errorNicolas Ferre
Traces related to IRQ management are useful for timers in case of non-working IRQ subsystem (switch to irq_domain for instance). Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-01ARM: at91: pit add DT supportJean-Christophe PLAGNIOL-VILLARD
Retreive registers address and IRQ from device tree entry. Called from at91_dt_init_irq() so that timers are up-n-running when timers initialization will occur. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [nicolas.ferre@atmel.com: change error path and interrupts property handling] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-01ARM: at91: AIC and GPIO IRQ device tree initializationNicolas Ferre
Both AIC and GPIO controllers are now using the standard of_irq_init() function to initialize IRQs in case of DT use. The DT specific initialization functions are now separated from the non-DT case and are now using "linear" irq domains. The .map() irqdomain operation is responsible for positioning the IRQ handlers. In AIC case, the Linux IRQ number is directly programmed in the hardware to avoid an additional reverse mapping operation. The AIC position its irq domain as the "default" irq domain. For DT case, the priority is not yet filled in the SMR. It will be the subject of another patch. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-01ARM: at91/board-dt: remove AIC irq domain from board fileNicolas Ferre
Adding of irqdomain in AIC code make the specification of the irq domain in board file useless. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-03-01ARM: at91/gpio: remove the static specification of gpio_chip.baseNicolas Ferre
This value is determined at runtime using device tree or platform data information. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-03-01ARM: at91/gpio: add .to_irq gpio_chip handlerNicolas Ferre
Replace the gpio_to_irq() macro by a plain gpiolib .to_irq() handler. This call is using the irqdomain to translate hardware to Linux IRQ numbers. The irq_to_gpio() macro is completely removed. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-03-01ARM: at91/gpio: non-DT builds do not have gpio_chip.of_node fieldNicolas Ferre
Protect build failure in case of non-DT configuration: the gpio_chip structure does not have a of_node field in case of !CONFIG_OF_GPIO. Keep this in a separate patch as it can be reverted if the field is added for both DT/non-DT cases. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-03-01ARM: at91/gpio: add irqdomain and DT supportNicolas Ferre
Add "legacy" type of irqdomain to preserve old-style numbering and allow smooth transition for both DT and non-DT cases. Original idea and code by Jean-Christophe Plagniol-Villard. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-03-01ARM: at91/gpio: change comments and one variable nameNicolas Ferre
What was true only on at91sam9263 about the sharing of a single AIC IRQ line for several GPIO banks is now used by several Atmel SoCs. Change a variable name to allow better understanding while introducing IRQ domains in following patches. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-03-01ARM: at91/snapper9260: move gpio_to_irq out of structure initializationNicolas Ferre
gpio_to_irq() implementation will be moved from a macro to a plain function: we cannot use it in a structure initialization anymore. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com>
2012-03-01ARM: at91/aic: add irq domain and device tree supportNicolas Ferre
Add an irqdomain for the AIC interrupt controller. The device tree support is mapping the registers and is using the irq_domain_add_legacy() to manage hwirq translation. The documentation is describing the meaning of the two cells required for using this "interrupt-controller" in a device tree node. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-03-01Merge branch 'irqdomain/next' of git://git.secretlab.ca/git/linux-2.6Nicolas Ferre
2012-02-29Merge branch 'at91-3.4-base2+cleanup' of ↵Arnd Bergmann
git://github.com/at91linux/linux-at91 into at91/staging/base2+cleanup * 'at91-3.4-base2+cleanup' of git://github.com/at91linux/linux-at91: (20 commits) ARM: at91: properly sort dtb files in Makefile.boot ARM: at91: add at91sam9g25ek.dts in Makefile.boot ARM: at91/board-dt: drop default console Atmel: move console default platform_device to serial driver ARM: at91: merge SRAM Memory banks thanks to mirroring ARM: at91: finally drop at91_sys_read/write ARM: at91/rtc-at91sam9: pass the GPBR to use via resources ARM: at91:rtc/rtc-at91sam9: ioremap register bank ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use ARM: at91/PMC: make register base soc independent ARM: at91/PMC: move assignment out of printf ARM: at91/pm_slowclock: add runtime detection of memory contoller ARM: at91: make sdram/ddr register base soc independent ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h ARM: at91/pm_slowclock: function slow_clock() accepts parameters ARM: at91/pm_slowclock: rename register to named define ARM: at91/ST: remove not needed casts ARM: at91: make ST (System Timer) soc independent ARM: at91: make matrix register base soc independent ARM: at91/at91x40: remove use of at91_sys_read/write Based on top of the at91/9x5, rmk/for-armsoc, at91/device-board, at91/pm_cleanup and at91/base. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-26irq_domain: Centralize definition of irq_dispose_mapping()Grant Likely
Several architectures define their own empty irq_dispose_mapping(). Since the irq_domain code is centralized now, there is little need to do so. This patch removes them and creates a new empty copy when !CONFIG_IRQ_DOMAIN is selected. The patch also means that IRQ_DOMAIN becomes selectable on all architectures. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jonas Bonn <jonas@southpole.se> Cc: sparclinux@vger.kernel.org Cc: linux@lists.openrisc.net
2012-02-24irq_domain/mips: Allow irq_domain on MIPSGrant Likely
This patch makes IRQ_DOMAIN usable on MIPS. It uses an ugly workaround to preserve current behaviour so that MIPS has time to add irq_domain registration to the irq controller drivers. The workaround will be removed in Linux v3.6 Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org
2012-02-23irq_domain/x86: Convert x86 (embedded) to use common irq_domainGrant Likely
This patch removes the x86-specific definition of irq_domain and replaces it with the common implementation. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-02-23ARM: at91: properly sort dtb files in Makefile.bootJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91: add at91sam9g25ek.dts in Makefile.bootNicolas Ferre
Reported-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91/board-dt: drop default consoleJean-Christophe PLAGNIOL-VILLARD
This default console mechanism is not used if the console is selected by command line (console= parameter). Dropping this will simplify the compilation of multiple SoC in the same kernel image. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23Atmel: move console default platform_device to serial driverJean-Christophe PLAGNIOL-VILLARD
This variable spread on every SoC that is using the atmel_serial.c driver can be included directly into the latter. This will allow to compile multiple soc in the same kernel. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: kernel@avr32linux.org
2012-02-23ARM: at91: merge SRAM Memory banks thanks to mirroringJean-Christophe PLAGNIOL-VILLARD
On at91sam9260 and at91sam9g20 the SRAM banks are mirrored. We can merge them together to be able to have bigger and continuous internal RAM. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91: finally drop at91_sys_read/writeJean-Christophe PLAGNIOL-VILLARD
Remove at91_sys_read/write() from io.h file. This function is not used anymore and was a stopper on the way to single zImage kernel for AT91. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91/rtc-at91sam9: pass the GPBR to use via resourcesJean-Christophe PLAGNIOL-VILLARD
The GPBR registers are used for storing RTC values. The GPBR registers to use are now provided using standard resource entry. The array is filled in SoC specific code. rtc-at91sam9 RTT as RTC driver is modified to retrieve this information. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [nicolas.ferre@atmel.com: rework resources assignment] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com>
2012-02-23ARM: at91/rtc-at91sam9: each SoC can select the RTT device to useJean-Christophe PLAGNIOL-VILLARD
For the RTT as RTC driver rtc-at91sam9, the platform_device structure is filled during SoC initialization. This will allow to convert this RTC driver as a standard platform driver. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-23ARM: at91/PMC: make register base soc independentJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Ryan Mallon <rmallon@gmail.com>
2012-02-23ARM: at91/PMC: move assignment out of printfNicolas Ferre
We move the assignment of values of register out of the seq_printf() calls: It is obviously more readable. Reported-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-10 06:40:57 +0000