| Age | Commit message (Collapse) | Author |
|---|
|
Change branch_setup_xol_ops() to simply use opc1 = OPCODE2(insn) - 0x10
if OPCODE1() == 0x0f; this matches the "short" jmp which checks the same
condition.
Thanks to lib/insn.c, it does the rest correctly. branch->ilen/offs are
correct no matter if this jmp is "near" or "short".
Reported-by: Jonathan Lebon <jlebon@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
|
|
Teach branch_emulate_op() to emulate the conditional "short" jmp's which
check regs->flags.
Note: this doesn't support jcxz/jcexz, loope/loopz, and loopne/loopnz.
They all are rel8 and thus they can't trigger the problem, but perhaps
we will add the support in future just for completeness.
Reported-by: Jonathan Lebon <jlebon@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
|
|
See the previous "Emulate unconditional relative jmp's" which explains
why we can not execute "jmp" out-of-line, the same applies to "call".
Emulating of rip-relative call is trivial, we only need to additionally
push the ret-address. If this fails, we execute this instruction out of
line and this should trigger the trap, the probed application should die
or the same insn will be restarted if a signal handler expands the stack.
We do not even need ->post_xol() for this case.
But there is a corner (and almost theoretical) case: another thread can
expand the stack right before we execute this insn out of line. In this
case it hit the same problem we are trying to solve. So we simply turn
the probed insn into "call 1f; 1:" and add ->post_xol() which restores
->sp and restarts.
Many thanks to Jonathan who finally found the standalone reproducer,
otherwise I would never resolve the "random SIGSEGV's under systemtap"
bug-report. Now that the problem is clear we can write the simplified
test-case:
void probe_func(void), callee(void);
int failed = 1;
asm (
".text\n"
".align 4096\n"
".globl probe_func\n"
"probe_func:\n"
"call callee\n"
"ret"
);
/*
* This assumes that:
*
* - &probe_func = 0x401000 + a_bit, aligned = 0x402000
*
* - xol_vma->vm_start = TASK_SIZE_MAX - PAGE_SIZE = 0x7fffffffe000
* as xol_add_vma() asks; the 1st slot = 0x7fffffffe080
*
* so we can target the non-canonical address from xol_vma using
* the simple math below, 100 * 4096 is just the random offset
*/
asm (".org . + 0x800000000000 - 0x7fffffffe080 - 5 - 1 + 100 * 4096\n");
void callee(void)
{
failed = 0;
}
int main(void)
{
probe_func();
return failed;
}
It SIGSEGV's if you probe "probe_func" (although this is not very reliable,
randomize_va_space/etc can change the placement of xol area).
Note: as Denys Vlasenko pointed out, amd and intel treat "callw" (0x66 0xe8)
differently. This patch relies on lib/insn.c and thus implements the intel's
behaviour: 0x66 is simply ignored. Fortunately nothing sane should ever use
this insn, so we postpone the fix until we decide what should we do; emulate
or not, support or not, etc.
Reported-by: Jonathan Lebon <jlebon@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
|
|
Finally we can kill the ugly (and very limited) code in __skip_sstep().
Just change branch_setup_xol_ops() to treat "nop" as jmp to the next insn.
Thanks to lib/insn.c, it is clever enough. OPCODE1() == 0x90 includes
"(rep;)+ nop;" at least, and (afaics) much more.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
|
|
Currently we always execute all insns out-of-line, including relative
jmp's and call's. This assumes that even if regs->ip points to nowhere
after the single-step, default_post_xol_op(UPROBE_FIX_IP) logic will
update it correctly.
However, this doesn't work if this regs->ip == xol_vaddr + insn_offset
is not canonical. In this case CPU generates #GP and general_protection()
kills the task which tries to execute this insn out-of-line.
Now that we have uprobe_xol_ops we can teach uprobes to emulate these
insns and solve the problem. This patch adds branch_xol_ops which has
a single branch_emulate_op() hook, so far it can only handle rel8/32
relative jmp's.
TODO: move ->fixup into the union along with rip_rela_target_address.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Jonathan Lebon <jlebon@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
|
|
arch_uretprobe_hijack_return_addr()
1. Add the trivial sizeof_long() helper and change other callers of
is_ia32_task() to use it.
TODO: is_ia32_task() is not what we actually want, TS_COMPAT does
not necessarily mean 32bit. Fortunately syscall-like insns can't be
probed so it actually works, but it would be better to rename and
use is_ia32_frame().
2. As Jim pointed out "ncopied" in arch_uretprobe_hijack_return_addr()
and adjust_ret_addr() should be named "nleft". And in fact only the
last copy_to_user() in arch_uretprobe_hijack_return_addr() actually
needs to inspect the non-zero error code.
TODO: adjust_ret_addr() should die. We can always calculate the value
we need to write into *regs->sp, just UPROBE_FIX_CALL should record
insn->length.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
|
|
SIGILL after the failed arch_uprobe_post_xol() should only be used as
a last resort, we should try to restart the probed insn if possible.
Currently only adjust_ret_addr() can fail, and this can only happen if
another thread unmapped our stack after we executed "call" out-of-line.
Most probably the application if buggy, but even in this case it can
have a handler for SIGSEGV/etc. And in theory it can be even correct
and do something non-trivial with its memory.
Of course we can't restart unconditionally, so arch_uprobe_post_xol()
does this only if ->post_xol() returns -ERESTART even if currently this
is the only possible error.
default_post_xol_op(UPROBE_FIX_CALL) can always restart, but as Jim
pointed out it should not forget to pop off the return address pushed
by this insn executed out-of-line.
Note: this is not "perfect", we do not want the extra handler_chain()
after restart, but I think this is the best solution we can realistically
do without too much uglifications.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
|
|
Currently the error from arch_uprobe_post_xol() is silently ignored.
This doesn't look good and this can lead to the hard-to-debug problems.
1. Change handle_singlestep() to loudly complain and send SIGILL.
Note: this only affects x86, ppc/arm can't fail.
2. Change arch_uprobe_post_xol() to call arch_uprobe_abort_xol() and
avoid TF games if it is going to return an error.
This can help to to analyze the problem, if nothing else we should
not report ->ip = xol_slot in the core-file.
Note: this means that handle_riprel_post_xol() can be called twice,
but this is fine because it is idempotent.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
|
|
arch_uprobe_analyze_insn() calls handle_riprel_insn() at the start,
but only "0xff" and "default" cases need the UPROBE_FIX_RIP_ logic.
Move the callsite into "default" case and change the "0xff" case to
fall-through.
We are going to add the various hooks to handle the rip-relative
jmp/call instructions (and more), we need this change to enforce the
fact that the new code can not conflict with is_riprel_insn() logic
which, after this change, can only be used by default_xol_ops.
Note: arch_uprobe_abort_xol() still calls handle_riprel_post_xol()
directly. This is fine unless another _xol_ops we may add later will
need to reuse "UPROBE_FIX_RIP_AX|UPROBE_FIX_RIP_CX" bits in ->fixup.
In this case we can add uprobe_xol_ops->abort() hook, which (perhaps)
we will need anyway in the long term.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
|
|
Introduce arch_uprobe->ops pointing to the "struct uprobe_xol_ops",
move the current UPROBE_FIX_{RIP*,IP,CALL} code into the default
set of methods and change arch_uprobe_pre/post_xol() accordingly.
This way we can add the new uprobe_xol_ops's to handle the insns
which need the special processing (rip-relative jmp/call at least).
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
|
|
No functional changes. Preparation to simplify the review of the next
change. Just reorder the code in arch_uprobe_pre/post_xol() functions
so that UPROBE_FIX_{RIP_*,IP,CALL} logic goes to the end.
Also change arch_uprobe_pre_xol() to use utask instead of autask, to
make the code more symmetrical with arch_uprobe_post_xol().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
|
|
Cosmetic. Move pre_xol_rip_insn() and handle_riprel_post_xol() up to
the closely related handle_riprel_insn(). This way it is simpler to
read and understand this code, and this lessens the number of ifdef's.
While at it, update the comment in handle_riprel_post_xol() as Jim
suggested.
TODO: rename them somehow to make the naming consistent.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
|
|
"mm" arg
Kill the "mm->context.ia32_compat" check in handle_riprel_insn(), if
it is true insn_rip_relative() must return false. validate_insn_bits()
passed "ia32_compat" as !x86_64 to insn_init(), and insn_rip_relative()
checks insn->x86_64.
Also, remove the no longer needed "struct mm_struct *mm" argument and
the unnecessary "return" at the end.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
|
|
No functional changes, preparation.
Shift the code from prepare_fixups() to arch_uprobe_analyze_insn()
with the following modifications:
- Do not call insn_get_opcode() again, it was already called
by validate_insn_bits().
- Move "case 0xea" up. This way "case 0xff" can fall through
to default case.
- change "case 0xff" to use the nested "switch (MODRM_REG)",
this way the code looks a bit simpler.
- Make the comments look consistent.
While at it, kill the initialization of rip_rela_target_address and
->fixups, we can rely on kzalloc(). We will add the new members into
arch_uprobe, it would be better to assume that everything is zero by
default.
TODO: cleanup/fix the mess in validate_insn_bits() paths:
- validate_insn_64bits() and validate_insn_32bits() should be
unified.
- "ifdef" is not used consistently; if good_insns_64 depends
on CONFIG_X86_64, then probably good_insns_32 should depend
on CONFIG_X86_32/EMULATION
- the usage of mm->context.ia32_compat looks wrong if the task
is TIF_X32.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
|
|
Pick up the latest fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Commit 8f619b5429d9 ("powerpc/ppc64: Do not turn AIL (reloc-on
interrupts) too early") added code to set the AIL bit in the LPCR
without checking whether the kernel is running in hypervisor mode. The
result is that when the kernel is running as a guest (i.e., under
PowerKVM or PowerVM), the processor takes a privileged instruction
interrupt at that point, causing a panic. The visible result is that
the kernel hangs after printing "returning from prom_init".
This fixes it by checking for hypervisor mode being available before
setting LPCR. If we are not in hypervisor mode, we enable relocation-on
interrupts later in pSeries_setup_arch using the H_SET_MODE hcall.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux
Pull blackfin updates from Steven Miao:
"Code cleanup, some previously ignored patches, and bug fixes"
* tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux:
blackfin: cleanup board files
bf609: clock: drop unused clock bit set/clear functions
Blackfin: bf537: rename "CONFIG_ADT75"
Blackfin: bf537: rename "CONFIG_AD7314"
Blackfin: bf537: rename ad2s120x ->ad2s1200
blackfin: bf537: fix typo "CONFIG_SND_SOC_ADV80X_MODULE"
blackfin: dma: current count mmr is read only
bfin_crc: Move architecture independant crc header file out of the blackfin folder.
bf54x: drop unuesd HOST status,control,timeout registers bit define macros
blackfin: portmux: cleanup head file
Blackfin: remove "config IP_CHECKSUM_L1"
blackfin: Remove GENERIC_GPIO config option again
blackfin:Use generic /proc/interrupts implementation
blackfin: bf60x: fix typo "CONFIG_PM_BFIN_WAKE_PA15_POL"
|
|
git://git.linuxfoundation.org/llvmlinux/kernel
Pull llvm patches from Behan Webster:
"These are some initial updates to support compiling the kernel with
clang.
These patches have been through the proper reviews to the best of my
ability, and have been soaking in linux-next for a few weeks. These
patches by themselves still do not completely allow clang to be used
with the kernel code, but lay the foundation for other patches which
are still under review.
Several other of the LLVMLinux patches have been already added via
maintainer trees"
* tag 'llvmlinux-for-v3.15' of git://git.linuxfoundation.org/llvmlinux/kernel:
x86: LLVMLinux: Fix "incomplete type const struct x86cpu_device_id"
x86 kbuild: LLVMLinux: More cc-options added for clang
x86, acpi: LLVMLinux: Remove nested functions from Thinkpad ACPI
LLVMLinux: Add support for clang to compiler.h and new compiler-clang.h
LLVMLinux: Remove warning about returning an uninitialized variable
kbuild: LLVMLinux: Fix LINUX_COMPILER definition script for compilation with clang
Documentation: LLVMLinux: Update Documentation/dontdiff
kbuild: LLVMLinux: Adapt warnings for compilation with clang
kbuild: LLVMLinux: Add Kbuild support for building kernel with Clang
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
"The first vfs pile, with deep apologies for being very late in this
window.
Assorted cleanups and fixes, plus a large preparatory part of iov_iter
work. There's a lot more of that, but it'll probably go into the next
merge window - it *does* shape up nicely, removes a lot of
boilerplate, gets rid of locking inconsistencie between aio_write and
splice_write and I hope to get Kent's direct-io rewrite merged into
the same queue, but some of the stuff after this point is having
(mostly trivial) conflicts with the things already merged into
mainline and with some I want more testing.
This one passes LTP and xfstests without regressions, in addition to
usual beating. BTW, readahead02 in ltp syscalls testsuite has started
giving failures since "mm/readahead.c: fix readahead failure for
memoryless NUMA nodes and limit readahead pages" - might be a false
positive, might be a real regression..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
missing bits of "splice: fix racy pipe->buffers uses"
cifs: fix the race in cifs_writev()
ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
kill generic_file_buffered_write()
ocfs2_file_aio_write(): switch to generic_perform_write()
ceph_aio_write(): switch to generic_perform_write()
xfs_file_buffered_aio_write(): switch to generic_perform_write()
export generic_perform_write(), start getting rid of generic_file_buffer_write()
generic_file_direct_write(): get rid of ppos argument
btrfs_file_aio_write(): get rid of ppos
kill the 5th argument of generic_file_buffered_write()
kill the 4th argument of __generic_file_aio_write()
lustre: don't open-code kernel_recvmsg()
ocfs2: don't open-code kernel_recvmsg()
drbd: don't open-code kernel_recvmsg()
constify blk_rq_map_user_iov() and friends
lustre: switch to kernel_sendmsg()
ocfs2: don't open-code kernel_sendmsg()
take iov_iter stuff to mm/iov_iter.c
process_vm_access: tidy up a bit
...
|
|
Pull audit updates from Eric Paris.
* git://git.infradead.org/users/eparis/audit: (28 commits)
AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERIC
audit: renumber AUDIT_FEATURE_CHANGE into the 1300 range
audit: do not cast audit_rule_data pointers pointlesly
AUDIT: Allow login in non-init namespaces
audit: define audit_is_compat in kernel internal header
kernel: Use RCU_INIT_POINTER(x, NULL) in audit.c
sched: declare pid_alive as inline
audit: use uapi/linux/audit.h for AUDIT_ARCH declarations
syscall_get_arch: remove useless function arguments
audit: remove stray newline from audit_log_execve_info() audit_panic() call
audit: remove stray newlines from audit_log_lost messages
audit: include subject in login records
audit: remove superfluous new- prefix in AUDIT_LOGIN messages
audit: allow user processes to log from another PID namespace
audit: anchor all pid references in the initial pid namespace
audit: convert PPIDs to the inital PID namespace.
pid: get pid_t ppid of task in init_pid_ns
audit: rename the misleading audit_get_context() to audit_take_context()
audit: Add generic compat syscall support
audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL
...
|
|
using IS_ENABLED() macro instead of defined(CONFIG_XXX) || defined(CONFIG_XXX_MODULE)
Signed-off-by: Steven Miao <realmz6@gmail.com>
|
|
Signed-off-by: Steven Miao <realmz6@gmail.com>
|
|
In v3.2 the Analog Devices ADT75 temperature sensor driver was removed
as an IIO driver and support for it was added to the LM75 HWMON driver.
But it was apparently overlooked to rename one reference to CONFIG_ADT75
to CONFIG_SENSORS_LM75. Do so now. Use the IS_ENABLED() macro, while
we're at it.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
|
|
In v3.2 the Analog Devices AD7314 temperature sensor driver was removed
as an IIO driver and added as a HWMON driver. But it was apparently
overlooked to rename two references to CONFIG_AD7314 to
CONFIG_SENSORS_AD7314. Do so now. Use the IS_ENABLED() macro, while
we're at it.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
|
|
In v3.2 the Analog Devices ad2s1200/ad2s1205 driver was renamed from
ad2s120x to ad2s1200. But it apparently forgot to rename the references
to this driver in the BF537-STAMP code. Rename these now, and use the
IS_ENABLED() macro, while we're at it.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
|
|
There's a (rather subtle) typo in "CONFIG_SND_SOC_ADV80X_MODULE". Fix it
once and for all by using IS_ENABLED(), which is designed to avoid
issues like this.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
|
|
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
|
|
folder.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Steven Miao <realmz6@gmail.com>
|
|
Signed-off-by: Steven Miao <realmz6@gmail.com>
|
|
drop unused head file
change pinmux request/free macro for backward compatiblity
add function declaration
Signed-off-by: Steven Miao <realmz6@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI and power management fixes and updates from Rafael Wysocki:
"This is PM and ACPI material that has emerged over the last two weeks
and one fix for a CPU hotplug regression introduced by the recent CPU
hotplug notifiers registration series.
Included are intel_idle and turbostat updates from Len Brown (these
have been in linux-next for quite some time), a new cpufreq driver for
powernv (that might spend some more time in linux-next, but BenH was
asking me so nicely to push it for 3.15 that I couldn't resist), some
cpufreq fixes and cleanups (including fixes for some silly breakage in
a couple of cpufreq drivers introduced during the 3.14 cycle),
assorted ACPI cleanups, wakeup framework documentation fixes, a new
sysfs attribute for cpuidle and a new command line argument for power
domains diagnostics.
Specifics:
- Fix for a recently introduced CPU hotplug regression in ARM KVM
from Ming Lei.
- Fixes for breakage in the at32ap, loongson2_cpufreq, and unicore32
cpufreq drivers introduced during the 3.14 cycle (-stable material)
from Chen Gang and Viresh Kumar.
- New powernv cpufreq driver from Vaidyanathan Srinivasan, with bits
from Gautham R Shenoy and Srivatsa S Bhat.
- Exynos cpufreq driver fix preventing it from being included into
multiplatform builds that aren't supported by it from Sachin Kamat.
- cpufreq cleanups related to the usage of the driver_data field in
struct cpufreq_frequency_table from Viresh Kumar.
- cpufreq ppc driver cleanup from Sachin Kamat.
- Intel BayTrail support for intel_idle and ACPI idle from Len Brown.
- Intel CPU model 54 (Atom N2000 series) support for intel_idle from
Jan Kiszka.
- intel_idle fix for Intel Ivy Town residency targets from Len Brown.
- turbostat updates (Intel Broadwell support and output cleanups)
from Len Brown.
- New cpuidle sysfs attribute for exporting C-states' target
residency information to user space from Daniel Lezcano.
- New kernel command line argument to prevent power domains enabled
by the bootloader from being turned off even if they are not in use
(for diagnostics purposes) from Tushar Behera.
- Fixes for wakeup sysfs attributes documentation from Geert
Uytterhoeven.
- New ACPI video blacklist entry for ThinkPad Helix from Stephen
Chandler Paul.
- Assorted ACPI cleanups and a Kconfig help update from Jonghwan
Choi, Zhihui Zhang, Hanjun Guo"
* tag 'pm+acpi-3.15-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (28 commits)
ACPI: Update the ACPI spec information in Kconfig
arm, kvm: fix double lock on cpu_add_remove_lock
cpuidle: sysfs: Export target residency information
cpufreq: ppc: Remove duplicate inclusion of fsl_soc.h
cpufreq: create another field .flags in cpufreq_frequency_table
cpufreq: use kzalloc() to allocate memory for cpufreq_frequency_table
cpufreq: don't print value of .driver_data from core
cpufreq: ia64: don't set .driver_data to index
cpufreq: powernv: Select CPUFreq related Kconfig options for powernv
cpufreq: powernv: Use cpufreq_frequency_table.driver_data to store pstate ids
cpufreq: powernv: cpufreq driver for powernv platform
cpufreq: at32ap: don't declare local variable as static
cpufreq: loongson2_cpufreq: don't declare local variable as static
cpufreq: unicore32: fix typo issue for 'clk'
cpufreq: exynos: Disable on multiplatform build
PM / wakeup: Correct presence vs. emptiness of wakeup_* attributes
PM / domains: Add pd_ignore_unused to keep power domains enabled
ACPI / dock: Drop dock_device_ids[] table
ACPI / video: Favor native backlight interface for ThinkPad Helix
ACPI / thermal: Fix wrong variable usage in debug statement
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pullx86 core platform updates from Peter Anvin:
"This is the x86/platform branch with the objectionable IOSF patches
removed.
What is left is proper memory handling for Intel GPUs, and a change to
the Calgary IOMMU code which will be required to make kexec work
sanely on those platforms after some upcoming kexec changes"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, calgary: Use 8M TCE table size by default
x86/gpu: Print the Intel graphics stolen memory range
x86/gpu: Add Intel graphics stolen memory quirk for gen2 platforms
x86/gpu: Add vfunc for Intel graphics stolen memory base address
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"This is a collection of minor fixes for x86, plus the IRET information
leak fix (forbid the use of 16-bit segments in 64-bit mode)"
NOTE! We may have to relax the "forbid the use of 16-bit segments in
64-bit mode" part, since there may be people who still run and depend on
16-bit Windows binaries under Wine.
But I'm taking this in the current unconditional form for now to see who
(if anybody) screams bloody murder. Maybe nobody cares. And maybe
we'll have to update it with some kind of runtime enablement (like our
vm.mmap_min_addr tunable that people who run dosemu/qemu/wine already
need to tweak).
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels
efi: Pass correct file handle to efi_file_{read,close}
x86/efi: Correct EFI boot stub use of code32_start
x86/efi: Fix boot failure with EFI stub
x86/platform/hyperv: Handle VMBUS driver being a module
x86/apic: Reinstate error IRQ Pentium erratum 3AP workaround
x86, CMCI: Add proper detection of end of CMCI storms
|
|
Pull second set of ARM changes from Russell King:
"This is the remainder of the ARM changes for this merge window.
Included in this request are:
- fixes for kprobes for big-endian support
- fix tracing in soft_restart
- avoid phys address overflow in kdump code
- fix reporting of read-only pmd bits in kernel page table dump
- remove unnecessary (and possibly buggy) call to outer_flush_all()
- fix a three sparse warnings (missing header file for function
prototypes)
- fix pj4 crashing single zImage (thanks to arm-soc merging changes
which enables this with knowledge that the corresponding fix had
not even been submitted for my tree before the merge window opened)
- vfp macro cleanups
- dump register state on undefined instruction userspace faults when
debugging"
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
Dump the registers on undefined instruction userspace faults
ARM: 8018/1: Add {inc,dec}_preempt_count asm macros
ARM: 8017/1: Move asm macro get_thread_info to asm/assembler.h
ARM: 8016/1: Check cpu id in pj4_cp0_init.
ARM: 8015/1: Add cpu_is_pj4 to distinguish PJ4 because it has some differences with V7
ARM: add missing system_misc.h include to process.c
ARM: 8009/1: dcscb.c: remove call to outer_flush_all()
ARM: 8014/1: mm: fix reporting of read-only PMD bits
ARM: 8012/1: kdump: Avoid overflow when converting pfn to physaddr
ARM: 8010/1: avoid tracers in soft_restart
ARM: kprobes-test: Workaround GAS .align bug
ARM: kprobes-test: use <asm/opcodes.h> for Thumb instruction building
ARM: kprobes-test: use <asm/opcodes.h> for ARM instruction building
ARM: kprobes-test: use <asm/opcodes.h> for instruction accesses
ARM: probes: fix instruction fetch order with <asm/opcodes.h>
|
|
Pull Microblaze updates from Michal Simek:
- use asm-generic/io.h and fix intc/timer code
- clean platform handling
- enable some syscalls
* tag 'microblaze-3.15-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Use asm-generic/io.h
microblaze: Remove platform folder
microblaze: Remove generic platform
microblaze: Sort Kconfig options
microblaze: Move DTS file to common location at boot/dts folder
microblaze: Fix compilation failure because of release_thread
microblaze: Fix sparse warning because of missing cpu.h header
microblaze: Make timer driver endian aware
microblaze: Make intc driver endian aware
microblaze: Wire-up new system calls sched_setattr/getattr
microblaze: Wire-up preadv/pwritev in syscall table
microblaze: Enable pselect6 syscall
microblaze: Drop architecture-specific declaration of early_printk
microblaze: Rename global function heartbeat()
|
|
The IRET instruction, when returning to a 16-bit segment, only
restores the bottom 16 bits of the user space stack pointer. We have
a software workaround for that ("espfix") for the 32-bit kernel, but
it relies on a nonzero stack segment base which is not available in
32-bit mode.
Since 16-bit support is somewhat crippled anyway on a 64-bit kernel
(no V86 mode), and most (if not quite all) 64-bit processors support
virtualization for the users who really need it, simply reject
attempts at creating a 16-bit segment when running on top of a 64-bit
kernel.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-kicdm89kzw9lldryb1br9od0@git.kernel.org
Cc: <stable@vger.kernel.org>
|
|
The only user of Kconfig symbol IP_CHECKSUM_L1 got removed in v2.6.33,
with commit ddf9ddacef0989fdeb22e182212a232488f0f3ad ("Blackfin: convert
to generic checksum code"). We can remove the Kconfig entry for this
unused symbol now.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
|
|
The Kconfig symbol GENERIC_GPIO was removed in v3.10. Nothing cares
about it anymore. It popped up somehow in v3.13, so it can be removed
again.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
|
|
There is nothing special in that blackfin code. Use the core
implementation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Miao <realmz6@gmail.com>
Cc: bfin <adi-buildroot-devel@lists.sourceforge.net>
|
|
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Steven Miao <realmz6@gmail.com>
|
|
|
|
|
|
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent
Pull EFI fixes from Matt Fleming:
"* Fix EFI boot regression introduced during the merge window where the
firmware was reading random values from the stack because we were
passing a pointer to the wrong object type.
* Kernel corruption has been reported when booting with the EFI boot
stub which was tracked down to setting a bogus value for
bp->hdr.code32_start, resulting in corruption during relocation.
* Olivier Martin reported that the wrong file handles were being passed
to efi_file_(read|close), which works for x86 by luck due to the way
that the FAT driver is implemented, but doesn't work on ARM."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
New kexec-tools wants to pass kdump kernel needed memmap via E820
directly, instead of memmap=exactmap. This makes saved_max_pfn not
be passed down to 2nd kernel. To keep 1st kernel and 2nd kernel using
the same TCE table size, Muli suggest to hard code the size to max (8M).
We can't get rid of saved_max_pfn this time, for backward compatibility
with old first kernel and new second kernel. However new first kernel
and old second kernel can not work unfortunately.
v2->v1:
- retain saved_max_pfn so new 2nd kernel can work with old 1st kernel
from Vivek
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Muli Ben-Yehuda <mulix@mulix.org>
Acked-by: Jon Mason <jdmason@kudzu.us>
Link: http://lkml.kernel.org/r/1394463120-26999-1-git-send-email-chaowang@redhat.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
We're currently passing the file handle for the root file system to
efi_file_read() and efi_file_close(), instead of the file handle for the
file we wish to read/close.
While this has worked up until now, it seems that it has only been by
pure luck. Olivier explains,
"The issue is the UEFI Fat driver might return the same function for
'fh->read()' and 'h->read()'. While in our case it does not work with
a different implementation of EFI_SIMPLE_FILE_SYSTEM_PROTOCOL. In our
case, we return a different pointer when reading a directory and
reading a file."
Fixing this actually clears up the two functions because we can drop one
of the arguments, and instead only pass a file 'handle' argument.
Reported-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
|
|
code32_start should point at the start of the protected mode code, and
*not* at the beginning of the bzImage. This is much easier to do in
assembly so document that callers of make_boot_params() need to fill out
code32_start.
The fallout from this bug is that we would end up relocating the image
but copying the image at some offset, resulting in what appeared to be
memory corruption.
Reported-by: Thomas Bächler <thomas@archlinux.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
|
|
commit 54b52d872680 ("x86/efi: Build our own EFI services pointer
table") introduced a regression because the 64-bit file_size()
implementation passed a pointer to a 32-bit data object, instead of a
pointer to a 64-bit object.
Because the firmware treats the object as 64-bits regardless it was
reading random values from the stack for the upper 32-bits.
This resulted in people being unable to boot their machines, after
seeing the following error messages,
Failed to get file info size
Failed to alloc highmem for files
Reported-by: Dzmitry Sledneu <dzmitry.sledneu@gmail.com>
Reported-by: Koen Kooi <koen@dominion.thruhere.net>
Tested-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
|
|
Pull slave-dmaengine updates from Vinod Koul:
- New driver for Qcom bam dma
- New driver for RCAR peri-peri
- New driver for FSL eDMA
- Various odd fixes and updates thru the subsystem
* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits)
dmaengine: add Qualcomm BAM dma driver
shdma: add R-Car Audio DMAC peri peri driver
dmaengine: sirf: enable generic dt binding for dma channels
dma: omap-dma: Implement device_slave_caps callback
dmaengine: qcom_bam_dma: Add device tree binding
dma: dw: Add suspend and resume handling for PCI mode DW_DMAC.
dma: dw: allocate memory in two stages in probe
Add new line to test result strings produced in verbose mode
dmaengine: pch_dma: use tasklet_kill in teardown
dmaengine: at_hdmac: use tasklet_kill in teardown
dma: cppi41: start tear down only if channel is busy
usb: musb: musb_cppi41: Dont reprogram DMA if tear down is initiated
dmaengine: s3c24xx-dma: make phy->irq signed for error handling
dma: imx-dma: Add missing module owner field
dma: imx-dma: Replace printk with dev_*
dma: fsl-edma: fix static checker warning of NULL dereference
dma: Remove comment about embedding dma_slave_config into custom structs
dma: mmp_tdma: move to generic device tree binding
dma: mmp_pdma: add IRQF_SHARED when request irq
dma: edma: Fix memory leak in edma_prep_dma_cyclic()
...
|
|
Protect more options for x86 with cc-option so that we don't get errors when
using clang instead of gcc. Add more or different options when using clang as
well. Also need to enforce that SSE is off for clang and the stack is 8-byte
aligned.
Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de>
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
|
