summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2010-08-04CRIS: Don't take faults while in_atomicJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Fixup lookup for delay slot faultsJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Discard exit.text and .data at runtimeJesper Nilsson
This allows us to handle references from __bug_table. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add cache aligned and read mostly data sectionsJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Return something from profile writeJesper Nilsson
Even if it doesn't matter, we should return something. Also, clean up some formatting. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add ARTPEC-3 and timestamps for sync-serialJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Better ARTPEC-3 support for gpioJesper Nilsson
Add PWM support, correct comment for ARTPEC-3. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add include guardJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Better handling of pinmux settingsJesper Nilsson
Depending on eth, eth_mido and geth fields in wr_hwprot, don't set corresponding pins on gpio port b to gpio mode. This avoids re-resetting the ethernet PHY should this already have been done. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: New DMA defines for ARTPEC-3Jesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: __do_strncpy_from_user: Don't read the byte beyond the nilJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Pagetable for ARTPEC-3Jesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Machine dependent memmap.hJesper Nilsson
Move the old one to mach-fs and replace with a new one that only include the correct one for the machine architecture. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Check if pointer is set before using itJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Machine dependent dma.hJesper Nilsson
Move the old one to mach-fs and replace with a new one that only include the correct one for the machine architecture. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Define __read_mostly for CRISv32Jesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Discard .note.gnu.build-id sectionJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Avoid compilation warning for putsJesper Nilsson
Rename to aputs. Also, simplify code by moving some common code out to macros. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add debug for assembler macrosJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Update for ARTPEC-3Jesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add more delays in DDR setupJesper Nilsson
Also, make DDR latency configurable. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add debug info for assembler codeJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add debug info for assembler codeJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add debug symbols for assembler codeJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Minor formatting fix in traps.cJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: v32: Correct auto-restart of syscallsJesper Nilsson
Register number was incorrect in syscalls that go via the restartblock (e.g, poll). Signed-off-by: Edgar Iglesias <Edgar.Iglesias@axis.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: More ARTPEC-3 support and i2c-boardinfo.Jesper Nilsson
Add standard i2d-devices. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Remove obsolete pinmux.c, now machine dependent.Jesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: kgdb: Fix compilation errorsJesper Nilsson
Paths were not correct and pack_hex_byte() takes two arguments. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: v32: Correct path for intr_vect.hJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: v32: Better irq mapping codeJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: v32: Correct address for romfs in the imageJesper Nilsson
Is after __bss_start, not __vmlinux_end Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Additional mmu settings for ARTPEC-3Jesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Faster syscall entry for CRISv32.Jesper Nilsson
Signed-off-by: Edgar Iglesias <Edgar.Iglesias@axis.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Simple insn reschedule to avoid interlocks.Jesper Nilsson
Brings down the CPI from ~1.5 to ~1.1. Signed-off-by: Edgar Iglesias <Edgar.Iglesias@axis.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add debug for assembler functionsJesper Nilsson
Signed-off-by: Edgar Iglesias <Edgar.Iglesias@axis.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Correct address of the romfs in boot imageJesper Nilsson
The romfs should land after __init_end Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Fasttimer: Remove obsolete ifdefJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Better link to rs485 in helpJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Remove CVS tag.Jesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: v10: remove all BKL usageJesper Nilsson
We don't need to take the BKL here. Also fixes compile error after last commit (smp_lock.h was not included) Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: gpio: don't call copy_to_user()/copy_from_user() while holding spinlocksJesper Nilsson
copy_to_user()/copy_from_user() must not be used with spinlocks held. Move locks inside each case so we have better control of when the locks are held. Also, since we use spinlocks, we don't need to hold the BKL, so remove it. Reported-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04arch/cris: Remove unnecessary casts of private_dataJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04cris: autoconvert trivial BKL users to private mutexJesper Nilsson
All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04cris: Pushdown the bkl from ioctlJesper Nilsson
From: Frederic Weisbecker <fweisbec@gmail.com> Pushdown the bkl to the remaining drivers using the deprecated .ioctl. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Kacur <jkacur@redhat.com>
2010-08-04CRIS: invoke oom-killer from page faultJesper Nilsson
As explained in commit 1c0fe6e3bd, we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Mikael Starvik <starvik@axis.com>
2010-08-04CRIS: GENERIC_TIME fixesJesper Nilsson
GENERIC_TIME was not functional for CRIS, giving random backward time jumps. For CRISv32 implement a new clocksource using the free running counter and ditch the arch_gettimeoffset. The random time jumps still existed, but turned out to be the write_seqlock which was missing around our do_timer() call. So switch over to GENERIC_TIME using the clocksource for CRISv32. CRISv10 doesn't have the free running counter needed for the clocksource trick, but we can still use GENERIC_TIME with arch_gettimeoffset. Unfortunately, there were problems in using the prescaler register to timer0 for the gettimeoffset calculation, so it is now ignored, making our resolution worse by the tune of 40usec (0.4%) worst case. At the same time, clean up some formatting and use NSEC_PER_SEC instead of 1000000000. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-07-27perf, powerpc: Use perf_sample_data_init() for the FSL codePeter Zijlstra
We should use perf_sample_data_init() to initialize struct perf_sample_data. As explained in the description of commit dc1d628a ("perf: Provide generic perf_sample_data initialization"), it is possible for userspace to get the kernel to dereference data.raw, so if it is not initialized, that means that unprivileged userspace can possibly oops the kernel. Using perf_sample_data_init makes sure it gets initialized to NULL. This conversion should have been included in commit dc1d628a, but it got missed. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2010-07-26Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Do not try to disable hpet if it hasn't been initialized before x86, i8259: Only register sysdev if we have a real 8259 PIC
2010-07-26Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] powernow-k8: Limit Pstate transition latency check [CPUFREQ] Fix PCC driver error path [CPUFREQ] fix double freeing in error path of pcc-cpufreq [CPUFREQ] pcc driver should check for pcch method before calling _OSC [CPUFREQ] fix memory leak in cpufreq_add_dev [CPUFREQ] revert "[CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)"
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-30 11:12:40 +0000