summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2012-01-27ARM: davinci: update mdio bus nameSekhar Nori
Commit 5a05a8200a4359ef2bfe9094c137dee35cfdd516 ("davinci_emac: use an unique MDIO bus name") introduced during the v3.3 merge window updated the davinci mdio bus name to make it unique. Update the bus name in board files which use DaVinci MDIO bus to match the new name. Without this PHY is not detected with error like: PHY 0:01 not found net eth0: could not connect to phy 0:01 Tested on DM365 and DA850 EVMs. Cc: Florian Fainelli <florian@openwrt.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-01-27Merge commit 'v3.3-rc1' into stable/for-linus-fixes-3.3Konrad Rzeszutek Wilk
* commit 'v3.3-rc1': (9775 commits) Linux 3.3-rc1 x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits qnx4: don't leak ->BitMap on late failure exits qnx4: reduce the insane nesting in qnx4_checkroot() qnx4: di_fname is an array, for crying out loud... KEYS: Permit key_serial() to be called with a const key pointer keys: fix user_defined key sparse messages ima: fix cred sparse warning uml: fix compile for x86-64 MPILIB: Add a missing ENOMEM check tpm: fix (ACPI S3) suspend regression nvme: fix merge error due to change of 'make_request_fn' fn type xen: using EXPORT_SYMBOL requires including export.h gpio: tps65910: Use correct offset for gpio initialization acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec intel_idle: Split up and provide per CPU initialization func ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2 tg3: Fix single-vector MSI-X code openvswitch: Fix multipart datapath dumps. ipv6: fix per device IP snmp counters ...
2012-01-27Merge branches 'sh/urgent' and 'sh/platform-updates' into sh-latestPaul Mundt
2012-01-26Merge branch 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Olof Johansson
fixes * 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: arch/arm/mach-imx/mach-mx53_ard.c: add missing iounmap ARM: imx: iomux-v1.h: Fix build error due to __init annotation
2012-01-26Merge branch 'fixes-for-arm-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes * 'fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: mach-ux500: no MMC_CAP_SD_HIGHSPEED on Snowball mach-ux500: enable ARM errata 764369 mach-ux500: do not override outer.inv_all mach-ux500: musb: now musb is always in OTG mode
2012-01-26Merge branch 'imx6/fixes' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson
into fixes * 'imx6/fixes' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx6: add missing twd_clk for imx6q clock
2012-01-27ARM: SAMSUNG: Fix missing api-change from subsys_interface changeHeiko Stuebner
Commit 4a858cfc9a (arm: convert sysdev_class to a regular subsystem) converted the samsung sysdevs into subsys_interface instances. While the original add-function only had a (struct sys_device *) parameter, the dev_add from subsys_interface needs (struct device *, struct subsys_interface *) leading to "initialized from incompatible pointer type" warnings. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-27ARM: EXYNOS: Fix "warning: initialization from incompatible pointer type"Jonghwan Choi
Fix the wrong function prototype. Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-27sh: add platform_device for SPI1 in setup-sh7757Shimoda, Yoshihiro
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-27sh: modify resource for SPI0 in setup-sh7757Shimoda, Yoshihiro
The new spi-sh driver decodes the IORESOURCE_MEM_TYPE_MASK. So, the resource needs the IORESOURCE_MEM_32BIT. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-27ARM: S5PV210: Fix the name of exynos4_clk_hdmiphy_ctrl() for S5PV210Kukjin Kim
Should be s5pv210_clk_hdmiphy_ctrl() in mach-s5pv210/. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-27sh: se7724: fix compile breakageGuennadi Liakhovetski
Fix compilation breakage arch/sh/boards/mach-se/7724/setup.c:182: error: 'V4L2_PIX_FMT_RGB565' undeclared here (not in a function) make[3]: *** [arch/sh/boards/mach-se/7724/setup.o] Error 1 caused by commit "fbdev: sh_mobile_lcdc: Support FOURCC-based format API" Also add other missing headers, even if compilation currently succeeds because of their indirect inclusion via other headers. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-27ARM: EXYNOS: Remove build warning without enabling PMKukjin Kim
Fixed following build warning with exynos4_defconfig. arch/arm/mach-exynos/clock.c:33: warning: 'exynos4_clock_save' defined but not used arch/arm/mach-exynos/clock-exynos4210.c:35: warning: 'exynos4210_clock_save' defined but not used arch/arm/mach-exynos/clock-exynos4212.c:35: warning: 'exynos4212_clock_save' defined but not used Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-27ARM: SAMSUNG: Fix platform data setup for I2C adapter 0Sylwester Nawrocki
The common static default_i2c_data structure gets bus_num set by each s3c_i2c?_set_platdata() call, except for s3c_i2c0_set_platdata(). Thus if for instance s3c_i2c1_set_platdata() is called prior to s3c_i2c0_set_platdata() the I2C0 controller has bus_num set to wrong value of 1, i.e. the one from previous set_platdata call. Fix this by also setting bus_num for I2C0. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-27ARM: EXYNOS: fix non-SMP builds for EXYNOS4Marek Szyprowski
This patch fixes the following build issue, which happens only if SMP has been disabled: arch/arm/mach-exynos/built-in.o: In function `exynos4_pm_resume': arch/arm/mach-exynos/pm.c:387: undefined reference to `scu_enable' Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-27ARM: S3C6410: Use device names for both I2C clocksMark Brown
When the S3C64xx CPUs were converted to clkdev mappings were added for the I2C controllers on them. On S3C6410 a device name is specified for I2C controller 1 but not for controller 0 which makes the code less robust as we'll falsely return the clock for controller 0 if there's an error in the request for controller 1. Improve things by registering a device name for controller 0 as well. Due to the fact that we change the numbering for controller 0 depending on if we've registered controller 1 this requires an ifdef to choose the name. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-27ARM: S3C64XX: Make s3c64xx_init_uarts() staticMark Brown
Now that it's in common.c it's not used in multiple source files. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc32: forced setting of mode of sun4m per-cpu timers
2012-01-26Merge branch 'omap_fixes_a_3.3rc' of git://git.pwsan.com/linux-2.6 into fixesTony Lindgren
2012-01-26ARM: OMAP2+: arch/arm/mach-omap2/smartreflex.c: add missing iounmapJulia Lawall
Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-26ARM: OMAP2+: arch/arm/mach-omap2/devices.c: introduce missing kfreeJulia Lawall
pdata needs to be freed before leaving the function in an error case. A simplified version of the semantic match that finds the problem is as follows: (http://coccinelle.lip6.fr) // <smpl> @r exists@ local idexpression x; statement S; identifier f1; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } x->f1 ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-26ARM: OMAP: fix MMC2 loopback clock handlingGrazvydas Ignotas
Currently MMC2 setup code can only enable loopback clock and relies on reset value for boards that need to have it disabled. This causes a problem with certain bootloaders that always enable that clock, resulting with unwanted bootloader dependencies. Fix this by making it disable the clock if board data says so. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-26ARM: OMAP: fix erroneous mmc2 clock change on mmc3 setupGrazvydas Ignotas
hsmmc23_before_set_reg() can set MMCSDIO2ADPCLKISEL bit, which enables internal clock for MMC2. Currently this function is also called by code handling MMC3, and if .internal_clock is set in platform data (by default it currently is), it will set MMCSDIO2ADPCLKISEL for MMC2 instead of MMC3 (MMC3 doesn't have such bit so nothing actually needs to be done). This breaks 2nd SD slot on pandora. Fix this by changing hsmmc23_before_set_reg() to only handle MMC2. Note that this removes .remux() call for MMC3, but no board currently needs it and it's also not called for MMC4 and MMC5. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-26ARM: OMAP2+: GPMC: fix device size setupYegor Yefremov
following statement can only change device size from 8-bit(0) to 16-bit(1), but not vice versa: regval |= GPMC_CONFIG1_DEVICESIZE(wval); so as this field has 1 reserved bit, that could be used in future, just clear both bits and then OR with the desired value Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-26ARM: OMAP2+: timer: Fix crash due to wrong arg to __omap_dm_timer_read_counterVaibhav Hiremath
Commit 2f0778af (ARM: 7205/2: sched_clock: allow sched_clock to be selected at runtime) had a typo for the case when CONFIG_OMAP_32K_TIMER is not set. In dmtimer_read_sched_clock(), wrong argument was getting passed to __omap_dm_timer_read_counter() function call; instead of "&clksrc", we were passing "clksrc.io_base", which results into kernel crash. To reproduce kernel crash, just disable the CONFIG_OMAP_32K_TIMER config option (and DEBUG_LL) and build/boot the kernel. This will use dmtimer as a kernel clocksource and lead to kernel crash during boot - [ 0.000000] OMAP clocksource: GPTIMER2 at 26000000 Hz [ 0.000000] sched_clock: 32 bits at 26MHz, resolution 38ns, wraps every 165191ms [ 0.000000] Unable to handle kernel paging request at virtual address 00030ef1 [ 0.000000] pgd = c0004000 [ 0.000000] [00030ef1] *pgd=00000000 [ 0.000000] Internal error: Oops: 5 [#1] SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Not tainted (3.3.0-rc1-11574-g0c76665-dirty #3) [ 0.000000] PC is at dmtimer_read_sched_clock+0x18/0x4c [ 0.000000] LR is at update_sched_clock+0x10/0x84 [ 0.000000] pc : [<c00243b8>] lr : [<c0018684>] psr: 200001d3 [ 0.000000] sp : c0641f38 ip : c0641e18 fp : 0000000a [ 0.000000] r10: 151c3303 r9 : 00000026 r8 : 76276259 [ 0.000000] r7 : 00028547 r6 : c065ac80 r5 : 431bde82 r4 : c0655968 [ 0.000000] r3 : 00030ef1 r2 : fb032000 r1 : 00000028 r0 : 00000001 Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-26Merge branch 'sa11x0-mcp-fixes' into fixesRussell King
2012-01-26Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode_amd: Add support for CPU family specific container files x86/amd: Add missing feature flag for fam15h models 10h-1fh processors x86/boot-image: Don't leak phdrs in arch/x86/boot/compressed/misc.c::Parse_elf() x86/numachip: Drop unnecessary conflict with EDAC x86/uv: Fix uninitialized spinlocks x86/uv: Fix uv_gpa_to_soc_phys_ram() shift
2012-01-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Fix assembler constraint to prevent overeager gcc optimisation mac_esp: rename irq mac_scsi: dont enable mac_scsi irq before requesting it macfb: fix black and white modes m68k/irq: Remove obsolete IRQ_FLG_* definitions Fix up trivial conflict in arch/m68k/kernel/process_mm.c as per Geert.
2012-01-26bugs, x86: Fix printk levels for panic, softlockups and stack dumpsPrarit Bhargava
rsyslog will display KERN_EMERG messages on a connected terminal. However, these messages are useless/undecipherable for a general user. For example, after a softlockup we get: Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ... kernel:Stack: Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ... kernel:Call Trace: Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ... kernel:Code: ff ff a8 08 75 25 31 d2 48 8d 86 38 e0 ff ff 48 89 d1 0f 01 c8 0f ae f0 48 8b 86 38 e0 ff ff a8 08 75 08 b1 01 4c 89 e0 0f 01 c9 <e8> ea 69 dd ff 4c 29 e8 48 89 c7 e8 0f bc da ff 49 89 c4 49 89 This happens because the printk levels for these messages are incorrect. Only an informational message should be displayed on a terminal. I modified the printk levels for various messages in the kernel and tested the output by using the drivers/misc/lkdtm.c kernel modules (ie, softlockups, panics, hard lockups, etc.) and confirmed that the console output was still the same and that the output to the terminals was correct. For example, in the case of a softlockup we now see the much more informative: Message from syslogd@intel-s3e37-04 at Jan 25 10:18:06 ... BUG: soft lockup - CPU4 stuck for 60s! instead of the above confusing messages. AFAICT, the messages no longer have to be KERN_EMERG. In the most important case of a panic we set console_verbose(). As for the other less severe cases the correct data is output to the console and /var/log/messages. Successfully tested by me using the drivers/misc/lkdtm.c module. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: dzickus@redhat.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1327586134-11926-1-git-send-email-prarit@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26x86: Properly parenthesize cmpxchg() macro argumentsJan Beulich
Quite oddly, all of the arguments passed through from the top level macros to the second level which didn't need parentheses had them, while the only expression (involving a parameter) needing them didn't. Very recently I got bitten by the lack thereof when using something like "array + index" for the first operand, with "array" being an array more narrow than int. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/4F2183A9020000780006F3E6@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26arch/arm/mach-imx/mach-mx53_ard.c: add missing iounmapJulia Lawall
Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-01-26ARM: imx: iomux-v1.h: Fix build error due to __init annotationFabio Estevam
Fix the following build error found when building imx_v4_v5_defconfig: CC arch/arm/mach-imx/mach-imx27ipcam.o In file included from arch/arm/plat-mxc/include/mach/iomux-mx27.h:23, from arch/arm/mach-imx/mach-imx27ipcam.c:22: arch/arm/plat-mxc/include/mach/iomux-v1.h:99: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'imx_iomuxv1_init' Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-01-26OMAPDSS: HDMI: PHY burnout fixTomi Valkeinen
A hardware bug in the OMAP4 HDMI PHY causes physical damage to the board if the HDMI PHY is kept powered on when the cable is not connected. This patch solves the problem by adding hot-plug-detection into the HDMI IP driver. This is not a real HPD support in the sense that nobody else than the IP driver gets to know about the HPD events, but is only meant to fix the HW bug. The strategy is simple: If the display device is turned off by the user, the PHY power is set to OFF. When the display device is turned on by the user, the PHY power is set either to LDOON or TXON, depending on whether the HDMI cable is connected. The reason to avoid PHY OFF when the display device is on, but the cable is disconnected, is that when the PHY is turned OFF, the HDMI IP is not "ticking" and thus the DISPC does not receive pixel clock from the HDMI IP. This would, for example, prevent any VSYNCs from happening, and would thus affect the users of omapdss. By using LDOON when the cable is disconnected we'll avoid the HW bug, but keep the HDMI working as usual from the user's point of view. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-01-26OMAP: 4430SDP/Panda: add HDMI HPD gpioTomi Valkeinen
Both Panda and 4430SDP use GPIO 63 as HDMI hot-plug-detect. Configure this GPIO in the board files. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-01-26OMAP: 4430SDP/Panda: setup HDMI GPIO muxesTomi Valkeinen
The HDMI GPIO pins LS_OE and CT_CP_HPD are not currently configured. This patch configures them as output pins. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-01-26OMAPDSS: remove wrong HDMI HPD muxingTomi Valkeinen
"hdmi_hpd" pin is muxed to INPUT and PULLUP, but the pin is not currently used, and in the future when it is used, the pin is used as a GPIO and is board specific, not an OMAP4 wide thing. So remove the muxing for now. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-01-26OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPDTomi Valkeinen
The GPIO 60 on 4430sdp and Panda is not HPD GPIO, as currently marked in the board files, but CT_CP_HPD, which is used to enable/disable HPD functionality. This patch renames the GPIO. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-01-26OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpiosTomi Valkeinen
Instead of freeing the GPIOs individually, use gpio_free_array(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-01-26x86/microcode_amd: Add support for CPU family specific container filesAndreas Herrmann
We've decided to provide CPU family specific container files (starting with CPU family 15h). E.g. for family 15h we have to load microcode_amd_fam15h.bin instead of microcode_amd.bin Rationale is that starting with family 15h patch size is larger than 2KB which was hard coded as maximum patch size in various microcode loaders (not just Linux). Container files which include patches larger than 2KB cause different kinds of trouble with such old patch loaders. Thus we have to ensure that the default container file provides only patches with size less than 2KB. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/r/20120120164412.GD24508@alberich.amd.com [ documented the naming convention and tidied the code a bit. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26x86/amd: Add missing feature flag for fam15h models 10h-1fh processorsAndreas Herrmann
That is the last one missing for those CPUs. Others were recently added with commits fb215366b3c7320ac25dca766a0152df16534932 (KVM: expose latest Intel cpu new features (BMI1/BMI2/FMA/AVX2) to guest) and commit 969df4b82904a30fef19a67398a0c854d223ea67 (x86: Report cpb and eff_freq_ro flags correctly) Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Link: http://lkml.kernel.org/r/20120120163823.GC24508@alberich.amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26x86/boot-image: Don't leak phdrs in arch/x86/boot/compressed/misc.c::Parse_elf()Jesper Juhl
We allocate memory with malloc(), but neglect to free it before the variable 'phdrs' goes out of scope --> leak. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1201232332590.8772@swampdragon.chaosbits.net [ Mostly harmless. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26x86/numachip: Drop unnecessary conflict with EDACDaniel J Blueman
EDAC detection no longer crashes multi-node systems, so don't conflict on it with NumaChip. Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com> Cc: Steffen Persvold <sp@numascale.com> Link: http://lkml.kernel.org/r/1327473349-28395-1-git-send-email-daniel@numascale-asia.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26x86/uv: Fix uninitialized spinlocksCliff Wickman
Initialize two spinlocks in tlb_uv.c and also properly define/initialize the uv_irq_lock. The lack of explicit initialization seems to be functionally harmless, but it is diagnosed when these are turned on: CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_LOCKDEP=y Signed-off-by: Cliff Wickman <cpw@sgi.com> Cc: <stable@kernel.org> Cc: Dimitri Sivanich <sivanich@sgi.com> Link: http://lkml.kernel.org/r/E1RnXd1-0003wU-PM@eag09.americas.sgi.com [ Added the uv_irq_lock initialization fix by Dimitri Sivanich ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26x86/uv: Fix uv_gpa_to_soc_phys_ram() shiftRuss Anderson
uv_gpa_to_soc_phys_ram() was inadvertently ignoring the shift values. This fix takes the shift into account. Signed-off-by: Russ Anderson <rja@sgi.com> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/r/20120119020753.GA7228@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-25ARM: OMAP3: hwmod data: register dss hwmods after dss_coreIlya Yanok
dss_core has to be initialized before any other DSS hwmod. Currently this is broken as dss_core is listed in chip/revision specific hwmod lists while other DSS hwmods are listed in common list which is registered first. This patch moves DSS hwmods (except for dss_core) to the separate list which is registered last to ensure that dss_core is already registered. This solves the problem with BUG() in L3 interrupt handler on boards with DSS enabled in bootloader. The long-term fix to this is to ensure modules are set up in dependency order in the hwmod core code. CC: Tomi Valkeinen <tomi.valkeinen@ti.com> CC: Archit Taneja <archit@ti.com> CC: Paul Walmsley <paul@pwsan.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> [paul@pwsan.com: add notes that this is just a temporary workaround until hwmod dependencies are added] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-01-25ARM: OMAP2/3: PRM: fix missing plat/irqs.h build breakagePaul Walmsley
Commit 22f51371f8c35869ed850f46aa76b6cc2b502110 ("ARM: OMAP3: pm: use prcm chain handler") breaks the build on a 2420-only config, due to a missing include for plat/irqs.h: CC arch/arm/mach-omap2/prm2xxx_3xxx.o arch/arm/mach-omap2/prm2xxx_3xxx.c:41:11: error: 'INT_34XX_PRCM_MPU_IRQ' undeclared here (not in a function) Fix by explicitly including it. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2012-01-25ARM: OMAP2+: io: fix compilation breakage on 2420-only configsPaul Walmsley
Commit 7b250aff1ce346b6c7bc0329a2350334d1c66525 ("ARM: OMAP: Avoid cpu_is_omapxxxx usage until map_io is done") breaks the build on a 2420-only config on v3.3-rc1: arch/arm/mach-omap2/built-in.o: In function `omap2430_init_early': arch/arm/mach-omap2/io.c:406: undefined reference to `omap2_set_globals_243x' arch/arm/mach-omap2/io.c:410: undefined reference to `omap243x_clockdomains_init' arch/arm/mach-omap2/io.c:411: undefined reference to `omap2430_hwmod_init' Fix by only compiling omap2420_init_early() when CONFIG_SOC_OMAP2420 is selected, and only compiling omap2430_init_early() when CONFIG_SOC_OMAP2430 is selected. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
2012-01-25ARM: OMAP4: hwmod data: Add names for DMIC memory address spacePeter Ujfalusi
To be able to get the memory resources by name from the DMIC driver (for MPU and for DMA). Without this patch, functionality that was working in 3.2 breaks in 3.3-rc1. This patch should have gone in as part of the 3.3 merge window, but was inadvertently missed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [paul@pwsan.com: added commit message note] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-01-25ARM: OMAP3: hwmod data: add SYSC_HAS_ENAWAKEUP for dispcTomi Valkeinen
dispc's sysc_flags is missing SYSC_HAS_ENAWAKEUP flag. This seems to cause SYNC_LOST errors from the DSS when the power management is enabled. This patch adds the missing SYSC_HAS_ENAWAKEUP flag. Note that there are other flags missing also (clock activity, DSI's sysc flags), but as they are not critical, they will be fixed in the next merge window. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-01-25ARM: OMAP2+: hwmod data: split omap2/3 dispc hwmod classTomi Valkeinen
Currently OMAP2 and 3 share the same omap_hwmod_class and omap_hwmod_class_sysconfig for dispc. However, OMAP3 has sysconfig bits that OMAP2 doesn't have, so we need to split those structs into OMAP2 and OMAP3 specific versions. This patch only splits the structs, without changing the contents. This is a prerequisite for a subsequent fix. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> [paul@pwsan.com: added commit note] Signed-off-by: Paul Walmsley <paul@pwsan.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-14 19:50:12 +0000