summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2012-05-20m68k: merge the MMU and non-MMU versions of the arch dma codeGreg Ungerer
The majority of the m68k architecture dma code is the same, so merge the current separated files dma_no.c and dma_mm.c back into a single dma.c The main alloc and free routines are a little different, so we keep a single #ifdef based on CONFIG_MMU for them. All the other support functions are now identical. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-05-20m68knommu: reorganize the no-MMU cache flushing to match m68kGreg Ungerer
Introduce cache_push() and cache_clear() functions for the non-MMU m68k devices. With these in place we can more easily merge some of the common m68k arch code. In particular by reorganizing the __flush_cache_all() code and separating the cache push and clear functions it becomes trivial to implement the new cache_push() and cache_clear() functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-05-20m68knommu: move the 54xx platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 532x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5407 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5307 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 528x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 527x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5272 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5249 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 523x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 520x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5206 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: simplify the ColdFire 5407 GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 532x GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 5307 GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 528x GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 527x GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 5272 GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 5249 GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 523x GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 520x GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 5206 GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: make duplicated ColdFire GPIO init code common for allGreg Ungerer
The code that adds each ColdFire platforms GPIO signals is duplicated in each platforms specific code. Remove it from each platforms code and put a single version in the existing ColdFire gpio subsystem init code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 532x init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 5407 init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 5307 init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 528x init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. We also need to rename some of the GPIO registers to be consistent with all other ColdFire parts (we can't use the new GPIO macros otherwise). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 527x init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 5272 init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 5249 init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 523x init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 520x init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 5206 init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: introduce macros to simplify ColdFire GPIO table initializationGreg Ungerer
We have very large tables in the ColdFire CPU GPIO setup code that essentially boil down to 2 distinct types of GPIO pin initiaization. Using 2 macros we can reduce these large tables to at most a dozen lines of setup code, and in quite a few cases a single table entry. Introduce these 2 macros into the existing mcfgpio.h header. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68k: fix compiler warning by properly inlining flat_set_persistent()Ezequiel Garcia
This patch removes the following warning: fs/binfmt_flat.c:752: warning: unused variable 'persistent'. There is neither functionality change, nor extra code generated. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68k: merge the MMU and non-MMU signal.c codeGreg Ungerer
The MMU (signal_mm.c) and non-MMU (signal_no.c) versions of the m68k architecture signal handling code are very similar. Most of their code is the same. Merge the two back into a single signal.c, and move some of the code around inside the file to minimize the number of #ifdefs required. Specificially we can group out the CONFIG_FPU and the CONFIG_MMU code. We end up needing a few other "#ifdef CONFIG_MMU" as well, but not too many. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-05-19sparc32: drop unused inline functions in srmmu.cSam Ravnborg
When decelared inline the compiler does not warn about unused functions. But they are not used so drop them. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32: drop unused functions in pgtsrmmu.hSam Ravnborg
One function was only used by leon - move it to a leon specific file. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32,leon: move leon mmu functions to leon_mm.cSam Ravnborg
We already have a leaon specific file - so keep all the laon stuff in one place. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Konrad Eisele <konrad@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32,leon: remove duplicate definitions in leon.hSam Ravnborg
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Konrad Eisele <konrad@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32,leon: remove duplicate UART register definitionsSam Ravnborg
The registers are defined in leon_amba too. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Konrad Eisele <konrad@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32,leon: move leon ASI definitions to asi.hSam Ravnborg
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Konrad Eisele <konrad@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32: move trap table to a separate fileSam Ravnborg
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc64: renamed ttable.S to ttable_64.SSam Ravnborg
To allow us to add ttable_32.S Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32: Remove asm/sysen.h header.David S. Miller
Defines a sun4c register, thus completely unused. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32: Delete asm/smpprim.hDavid S. Miller
Completely unused. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32: Remove unused empty_bad_page{,_table} declarations.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32: Kill boot_cpu_id4David S. Miller
It is written, but never actually read. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32: Move GET_PROCESSOR*_ID() out of asm/asmmacro.hDavid S. Miller
GET_PROCESSOR4D_ID is completely unused, so delete it. Move GET_PROCESSOR4M_ID to the sun4m specific trap code which uses it. We now no longer need to include asm/asi.h Signed-off-by: David S. Miller <davem@davemloft.net>