summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2012-09-21ARM: EXYNOS: fix address for EXYNOS4 MDMA1Kukjin Kim
use non-secure mdma1 address. Reported-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: EXYNOS: fixed SYSMMU setup definition to mate parameter nameSeung-Woo Kim
This is trivial patch to mate parameter name between iommu api enabled case and disabled case. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: KyongHo Cho <pullip.cho@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-20Merge tag 'omap-cleanup-local-headers-for-v3.7' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren: This branch contains mostly scripted changes to make omap header files local where possible to get us closer to supporting the ARM single zImage. After these changes mach includes are pretty much out of the way for omap2+, but still lots of manual work remains to sort through the remaining plat includes. * tag 'omap-cleanup-local-headers-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits) ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local ARM: OMAP2+: Make ctrl_module_core_44xx.h local ARM: OMAP2+: Make board-rx51.h local ...
2012-09-20Merge tag 'imx-dt-3.7-2' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson
into next/dt From Shawn Guo: This is the second round of imx-dt patches for 3.7. It's based on and imx-dt-3.7 and imx-clk-dt-lookup which have already been pulled. * tag 'imx-dt-3.7-2' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx6q: use pll2_pfd2_396m as the enfc_sel's parent ARM: dts: imx6q-sabrelite: add usbotg pinctrl support ARM: dts: imx6q-sabrelite: add usbmisc device
2012-09-20Merge tag 'mxs-dt-3.7-2' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson
into next/dt From Shawn Guo: This is the second round of mxs-dt patches for 3.7. It's based on mxs-dt-3.7 and mxs-clk-dt-lookup which have been pulled into arm-soc. * tag 'mxs-dt-3.7-2' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: m28evk: Disable OCOTP OUI loading ARM: dts: imx23-olinuxino: Add USB host support ARM: dts: mx23: Add USB resources ARM: dts: mxs: Add ethernetX to macX aliases
2012-09-20Merge tag 'tegra-for-3.7-cleanup2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup2 ARM: tegra: second round of cleanups This branch mainly removes dead code following the removal of all board files. The removals depend on various changes in other branches, so they are all merged together and form the basis of this branch, as enumerated below. Finally, there are no remaining users of pinconf-tegra.h outside the pinctrl subsystem, so that header is incorporated into an existing file there. This reduces the number of headers in mach-tegra/include, and so helps move towards single zImage. This branch is based on tegra-for-3.7-cleanup, followed by a merge of tegra-for-3.7-board-removal, followed by a merge of tegra-for-3.7-common-clk, followed by a merge of: git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git xceiv-for-v3.7 By Stephen Warren (16) and others via Stephen Warren * tag 'tegra-for-3.7-cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (29 commits) pinctrl: tegra: move pinconf-tegra.h content into drivers/pinctrl ARM: tegra: delete unused headers ARM: tegra: remove useless includes of <mach/*.h> ARM: tegra: remove dead code ARM: dt: tegra: harmony: configure power off ARM: dt: tegra: harmony: add regulators ARM: tegra: remove board (but not DT) support for Harmony ARM: tegra: remove board (but not DT) support for Paz00 ARM: tegra: remove board (but not DT) support for TrimSlice ARM: Tegra: Add smp_twd clock for Tegra20 ARM: tegra: cpu-tegra: explicitly manage re-parenting ARM: tegra: fix overflow in tegra20_pll_clk_round_rate() ARM: tegra: Fix data type for io address ARM: tegra: remove tegra_timer from tegra_list_clks ARM: tegra30: clocks: fix the wrong tegra_audio_sync_clk_ops name ARM: tegra: clocks: separate tegra_clk_32k_ops from Tegra20 and Tegra30 ARM: tegra: Remove duplicate code ARM: tegra: Port tegra to generic clock framework ARM: tegra: Add clk_tegra structure and helper functions ARM: tegra: Rename tegra20 clock file ...
2012-09-20Merge tag 'xceiv-for-v3.7' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into next/cleanup2 usb: xceiv: patches for v3.7 merge window nop xceiv got its own header to avoid polluting otg.h. It has also learned to work as USB2 and USB3 phys so we can use it on USB3 controllers. Together with those two changes to nop xceiv, we're adding basic PHY support to dwc3 driver, this is to allow platforms which actually have a SW-controllable PHY talk to them through dwc3 driver. We're adding a new phy driver for the OMAP architecture. This driver is for the PHY found in OMAP4 SoCs, and a new phy driver for the marvell architecture. An extra phy driver - for Tegra SoCs - is now moving from arch/arm/mach-tegra* to drivers/usb/phy. Also here, there's the creation of <linux/usb/phy.h> which should be used from now on for PHY drivers, even those which don't support OTG. * tag 'xceiv-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: otg: mxs-phy: Fix mx23 operation usb: dwc3: add basic PHY support usb: dwc3: exynos: add nop transceiver support usb: dwc3: omap: add nop transceiver support usb: dwc3: pci: add nop transceiver support usb: otg: move the dereference below the NULL test arm: omap: phy: remove unused functions from omap-phy-internal.c usb: twl4030: Add device tree support for twl4030 usb usb: twl6030: Add dt support for twl6030 usb usb: otg: make twl6030_usb as a comparator driver to omap_usb2 usb: phy: add a new driver for omap usb2 phy usb: phy: fix build break usb: move phy driver from mach-tegra to drivers/usb usb: otg: Move phy interface to separate file. usb: phy: isp1301: Remove unused static array and define usb: phy: mv_u3d: Add usb phy driver for mv_u3d usb: otg: Remove the unneeded NULL check usb: xceiv: nop: let it work as USB2 and USB3 phy usb: xceiv: create nop-usb-xceiv.h and avoid pollution on otg.h Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-20Merge tag 'tegra-for-3.7-dmaengine' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup ARM: tegra: switch to dmaengine The Tegra code-base has contained both a legacy DMA and a dmaengine driver since v3.6-rcX. This series flips Tegra's defconfig to enable dmaengine rather than the legacy driver, and removes the legacy driver and all client code. * tag 'tegra-for-3.7-dmaengine' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ASoC: tegra: remove support of legacy DMA driver based access spi: tegra: remove support of legacy DMA driver based access ARM: tegra: apbio: remove support of legacy DMA driver based access ARM: tegra: dma: remove legacy APB DMA driver ARM: tegra: config: enable dmaengine based APB DMA driver + sync to 3.6-rc6
2012-09-20ARM: tegra: harmony: fix ldo7 regulator-nameStephen Warren
On Harmony, LDO7 does not feed vdd_fuse. Correct the regulator name. This issue was probably the result of copying Ventana's regulator setup when creating the Harmony .dts file. No other naming issues appear to exist. Reported-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21ARM: dts: Enable on-board keys as wakeup source for exynos4210-origenTushar Behera
On board keys on Origen board can serve as wakeup sources, hence they are marked accordingly in the device tree file. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: SAMSUNG: Add check for NULL in clock interfaceChander Kashyap
The clock instance parameter in Samsung clock interface is not being checked for NULL pointers. Add checks for NULL pointers. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Acked-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off stateChander Kashyap
The clocks for PCM, Slimbus, Spdif added to off list in order to turn them off at boot time. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Acked-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: dts: use uart2 for console on smdkv310 and smdk5250Kukjin Kim
Cc: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: EXYNOS: Add bus clock for FIMDLeela Krishna Amudala
This patch adds the bus clock for FIMD and changes the device name for lcd clock Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: dts: Add basic dts file for Samsung Trats boardTomasz Figa
This commit adds basic device tree for Exynos4210-based Trats board. Currently it provides support for eMMC over sdhci and MAX8997 PMIC. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: EXYNOS: Add OF compatibility lookups for EXYNOS4 i2c adaptersTomasz Figa
Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: dts: Specify address and size cells for i2c controllers for EXYNOS4Tomasz Figa
Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: dts: Assume status of all optional nodes as disabled for exynos4Tomasz Figa
Currently all boards must explicitly disable all unused device tree nodes of unused components (e.g. i2c, sdhci, etc...). This makes it necessary to all boards to be aware of all components on the SoC, which in turns makes board dts files longer and more difficult to maintain (e.g. adding new components to SoC-level tree requires adding nodes with status="disabled" to every board). This patch changes "status" of all optional components in SoC-level dts file to "disabled", adds status="okay" to respective nodes of used components in dts of all boards and removes all nodes with only status="disabled" from boards dts. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: EXYNOS: Use exynos4 prefix instead of exynos4210 on exynos4-dtTomasz Figa
Since mach-exynos4-dt.c is also going to be used for other SoCs from EXYNOS4 line, rename internal structures and functions to use exynos4_ prefix, instead of exynos4210_. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: dts: Move parts common to EXYNOS4 from exynos4210.dtsi to exynos4.dtsiTomasz Figa
Most definitions from exynos4210.dtsi can be applied for other SoCs from EXYNOS4 line as well, so move the common part into separate file that can be included by dtsi files of other EXYNOS4 SoCs (as well as current exynos4210.dtsi). Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Thomas Abraham <thomas.abraham@linaro.org> [kgene.kim@samsung.com: Dongjin Kim <dongjin.kim@agreeyamobility.net> submitted a similar patch 'Add DTS files derived from common EXYNOS4' before this but I picked this up because of included exynos4x12 stuff] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-20Merge tag 'tegra-for-3.7-dt2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/dt ARM: tegra: second round of device tree changes This branch includes some late device tree changes for Tegra: A property is added to Whistler's device tree to enable the PMIC to act as the pm_power_off() implementation. A number of new device tree are added for boards from Avionic Design. * tag 'tegra-for-3.7-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support ARM: tegra: Add Avionic Design Medcom-Wide support ARM: tegra: Add Avionic Design Plutux support ARM: tegra: Add Avionic Design Tamonten support ARM: tegra: dts: Add pwm label ARM: dt: tegra: whistler: configure power off
2012-09-20Merge tag 'rpi-for-3.7' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/soc ARM: add basic BCM2835 SoC and Raspberry Pi board support The BCM2835 is an ARM SoC from Broadcom. This patch adds very basic support for this SoC; enough to boot the system into an initrd with UART console, interrupt controller, timers, and a stub clock driver. Also provided is a similarly basic device tree for the Raspberry Pi Model B board. This series was written by Simon Arlott, Chris Boot, and Dom Cobley downstream, with reference to a Broadcom tree, and modified for upstream and submitted by Stephen Warren. * tag 'rpi-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi: MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture ARM: bcm2835: instantiate console UART ARM: bcm2835: add stub clock driver ARM: bcm2835: add system timer ARM: bcm2835: add interrupt controller driver ARM: add infra-structure for BCM2835 and Raspberry Pi
2012-09-20Merge branch 'next/defconfig-samsung' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/defconfig From Kukjin Kim: This is for updating s3c6400_defconfig to build every s3c64xx stuff. This helps to know at least building error before merging them. * 'next/defconfig-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: s3c6400_defconfig: enable more boards in defconfig Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-20Merge branch 'next/board-samsung' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/boards From Kukjin Kim: This is for updating non-DT Samsung board files for v3.7, there are adding generic PWM lookup support and some updates. * 'next/board-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Add generic PWM lookup support for SMDKV310 ARM: EXYNOS: Add generic PWM lookup support for SMDK4X12 ARM: EXYNOS: Use generic pwm driver in Origen board ARM: dts: Add heartbeat gpio-leds support to Origen ARM: dts: Use active low flag for gpio-keys on Origen ARM: S3C64XX: Register audio platform devices for Bells on Cragganmore ARM: S3C64XX: Update configuration for WM5102 module on Cragganmore Fixed trivial merge conflict in arch/arm/mach-exynos/mach-smdkv310.c. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-20Merge branch 'next/dt-gscaler' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers From Kukjin Kim: Here is G-Scaler DT for supporting EXYNOS5 SoCs. * 'next/dt-gscaler' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Adds G-Scaler device from Device Tree ARM: EXYNOS: Add clock support for G-Scaler
2012-09-20Merge branch 'next/pinctrl-samsung' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers From Kukjin Kim: This branch is for supporting pinctrl for Samsung EXYNOS. Now this can support EXYNOS4210 and other EXYNOS SoCs such as EXYNOS4X12 will be supported next time. * 'next/pinctrl-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used gpio: exynos4: skip gpiolib registration if pinctrl driver is used pinctrl: add exynos4210 specific extensions for samsung pinctrl driver pinctrl: add samsung pinctrl and gpiolib driver
2012-09-20Merge branch 'samsung/cleanup' into next/cleanupOlof Johansson
From Kukjin Kim: Here, there are cleanup patches for Samsung v3.7 and most of them are related to cleanup Samsung specific gpio API. * samsung/cleanup: gpio: samsung: Update documentation ARM: S3C24XX: Use module_platform_driver macro in mach-osiris-dvs.c ARM: S3C24XX: Use module_platform_driver macro in h1940-bluetooth.c gpio-samsung: Remove now unused s3c2410_gpio* API ARM: S3C24XX: Remove obsolete GPIO API declarations ARM: S3C24XX: Convert users of s3c2410_gpio_setpin to gpiolib API ARM: EXYNOS: cleanup unused code related to GPS
2012-09-21ARM: SAMSUNG: Fix HDMI related warningsSachin Kamat
Silences the following warnings: arch/arm/plat-samsung/devs.c:765:31: warning: symbol 's5p_hdmi_def_platdata' was not declared. Should it be static? arch/arm/plat-samsung/devs.c:767:13: warning: symbol 's5p_hdmi_set_platdata' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: S3C24XX: Add .get_rate callback for "camif-upll" clockSylwester Nawrocki
Add missing get_rate callback for the "camif-upll" clock, so frequency of this clock is properly reported with clk_get_rate(). Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: EXYNOS: Fix incorrect help textSachin Kamat
Changed Exynos4 -> EXYNOS5. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllersChander Kashyap
The clocks for NAND, OneNAND and Transport Stream Interface(TSI) controllers could be either enabled or disabled at boot. To ensure that these are turned off until used, add them to the list of clocks to be turned off during boot. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Reviewed-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-20ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data moveKevin Hilman
AM33xx hwmod data includes "mcspi.h" which has now been moved after the platform_data move. Fix it. Signed-off-by: Kevin Hilman <khilman@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-20ARM: OMAP2+: Make omap4-keypad.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make l4_3xxx.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make l4_2xxx.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make l3_3xxx.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make l3_2xxx.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP1: Move irda.h from plat to machTony Lindgren
This is only used by omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make hdq1w.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make gpmc-smsc911x.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make gpmc-smc91x.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP1: Move flash.h from plat to machTony Lindgren
This is only used by omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make debug-devices.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP1: Move board-voiceblue.h from plat to machTony Lindgren
This is only used by omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP1: Move board-sx1.h from plat to machTony Lindgren
This is only used by omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make omap-wakeupgen.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make omap-secure.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make ctrl_module_wkup_44xx.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>