summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2012-09-26x86, suspend: On wakeup always initialize cr4 and EFERH. Peter Anvin
We already have a flag word to indicate the existence of MISC_ENABLES, so use the same flag word to indicate existence of cr4 and EFER, and always restore them if they exist. That way if something passes a nonzero value when the value *should* be zero, we will still initialize it. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Link: http://lkml.kernel.org/r/1348529239-17943-1-git-send-email-hpa@linux.intel.com
2012-09-26x86-32: Start out eflags and cr4 cleanH. Peter Anvin
%cr4 is supposed to reflect a set of features into which the operating system is opting in. If the BIOS or bootloader leaks bits here, this is not desirable. Consider a bootloader passing in %cr4.pae set to a legacy paging kernel, for example -- it will not have any immediate effect, but the kernel would crash when turning paging on. A similar argument applies to %eflags, and since we have to look for %eflags.id being settable we can use a sequence which clears %eflags as a side effect. Note that we already do this for x86-64. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1348529239-17943-1-git-send-email-hpa@linux.intel.com
2012-09-26ARM: 7540/1: kexec: Check segment memory addressesMatthew Leach
Ensure that the memory regions that are set within the segments correspond to physical contiguous memory regions. Reviewed-by: Simon Horman <horms@verge.net.au> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Matthew Leach <matthew.leach@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-26ARM: 7539/1: kexec: scan for dtb magic in segmentsMatthew Leach
This patch allows a dtb to be passed to a new kernel using the kexec mechinism. When loading segments from userspace, scan each segment's first four bytes for the dtb magic. If this is found set the kexec_boot_atags parameter to the relocate_kernel code to the phyical address of this segment. Reviewed-by: Simon Horman <horms@verge.net.au> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Matthew Leach <matthew.leach@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-26ARM: 7538/1: delay: add registration mechanism for delay timer sourcesJonathan Austin
The current timer-based delay loop relies on the architected timer to initiate the switch away from the polling-based implementation. This is unfortunate for platforms without the architected timers but with a suitable delay source (that is, constant frequency, always powered-up and ticking as long as the CPUs are online). This patch introduces a registration mechanism for the delay timer (which provides an unconditional read_current_timer implementation) and updates the architected timer code to use the new interface. Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-26Merge branch 'cache-louis' of git://linux-arm.org/linux-2.6-lp into devel-stableRussell King
2012-09-26Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds
Pull c6x arch fixes from Mark Salter: - Add __NR_kcmp to generic syscall list - C6X: Use generic asm/barrier.h * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: syscalls: add __NR_kcmp syscall to generic unistd.h c6x: use asm-generic/barrier.h
2012-09-26Merge branch 'xenarm-for-linus' of ↵Konrad Rzeszutek Wilk
git://xenbits.xen.org/people/sstabellini/linux-pvhvm into stable/for-linus-3.7 * 'xenarm-for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: arm: introduce a DTS for Xen unprivileged virtual machines MAINTAINERS: add myself as Xen ARM maintainer xen/arm: compile netback xen/arm: compile blkfront and blkback xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree xen/arm: receive Xen events on ARM xen/arm: initialize grant_table on ARM xen/arm: get privilege status xen/arm: introduce CONFIG_XEN on ARM xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM xen/arm: Introduce xen_ulong_t for unsigned long xen/arm: Xen detection and shared_info page mapping docs: Xen ARM DT bindings xen/arm: empty implementation of grant_table arch specific functions xen/arm: sync_bitops xen/arm: page.h definitions xen/arm: hypercalls arm: initial Xen support Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-26MIPS: Replace `-' in defconfig filename wth `_' for consistency.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-09-26x86: Exit RCU extended QS on notify resumeFrederic Weisbecker
do_notify_resume() may be called on irq or exception exit. But at that time the exception has already called rcu_user_enter() and the irq has already called rcu_irq_exit(). Since it can use RCU read side critical section, we must call rcu_user_exit() before doing anything there. Then we must call back rcu_user_enter() after this function because we know we are going to userspace from there. This complete support for userspace RCU extended quiescent state in x86-64. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Alessio Igor Bogani <abogani@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Avi Kivity <avi@redhat.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kevin Hilman <khilman@ti.com> Cc: Max Krasnyansky <maxk@qualcomm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-26x86: Use the new schedule_user API on userspace preemptionFrederic Weisbecker
This way we can exit the RCU extended quiescent state before we schedule a new task from irq/exception exit. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Alessio Igor Bogani <abogani@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Avi Kivity <avi@redhat.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kevin Hilman <khilman@ti.com> Cc: Max Krasnyansky <maxk@qualcomm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-26x86: Exception hooks for userspace RCU extended QSFrederic Weisbecker
Add necessary hooks to x86 exception for userspace RCU extended quiescent state support. This includes traps, page fault, debug exceptions, etc... Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Alessio Igor Bogani <abogani@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Avi Kivity <avi@redhat.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kevin Hilman <khilman@ti.com> Cc: Max Krasnyansky <maxk@qualcomm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-09-26x86: Unspaghettize do_general_protection()Frederic Weisbecker
There is some unnatural label based layout in this function. Convert the unnecessary goto to readable conditional blocks. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org>
2012-09-26x86: Syscall hooks for userspace RCU extended QSFrederic Weisbecker
Add syscall slow path hooks to notify syscall entry and exit on CPUs that want to support userspace RCU extended quiescent state. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Alessio Igor Bogani <abogani@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Avi Kivity <avi@redhat.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kevin Hilman <khilman@ti.com> Cc: Max Krasnyansky <maxk@qualcomm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-26rcu: Switch task's syscall hooks on context switchFrederic Weisbecker
Clear the syscalls hook of a task when it's scheduled out so that if the task migrates, it doesn't run the syscall slow path on a CPU that might not need it. Also set the syscalls hook on the next task if needed. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Alessio Igor Bogani <abogani@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Avi Kivity <avi@redhat.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kevin Hilman <khilman@ti.com> Cc: Max Krasnyansky <maxk@qualcomm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-26s390: update defconfigHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/jump label,nss: let shared kernel support depend on !JUMP_LABELHeiko Carstens
We can have either shared kernel or jump label support, but not both. If a kernel gets IPL'ed from an NSS it's not possible to patch the text segment, since it's read-only. Therefore any static branches cannot be updated. So we need to make sure that shared kernel support is disabled if jump label support is enabled. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/disassembler: fix decoding of risblg instructionHeiko Carstens
Fix typo: risblk -> risblg. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/bpf,jit: add support for BPF_S_ANC_ALU_XOR_X instructionHeiko Carstens
Add support for new BPF_S_ANC_ALU_XOR_X instruction which got added with ffe06c17 "filter: add XOR operation". s390 version of 4bfaddf1 "x86 bpf_jit: support BPF_S_ANC_ALU_XOR_X instruction". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/traps: move call to print_modules() out of show_regs()Heiko Carstens
Same as 0fa0e2f0 "x86: Move call to print_modules() out of show_regs()". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/mm: mark free_initrd_mem() as __initHeiko Carstens
Same as 0d26d1d8 "x86/mm: Mark free_initrd_mem() as __init". In addition also add the __init annotation to setup_zero_pages(). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/cmpxchg,percpu: implement cmpxchg_double()Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/percpu: implement this_cpu_add_return()Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/percpu: implement this_cpu_xchg()Heiko Carstens
The generic variant has a local_irq_save/restore pair which is quite expensive. It is sufficient to disable preemption, which is a no-op with !CONFIG_PREEMPT and then use the regular xchg macro. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/kexec: remove CONFIG_KEXECHeiko Carstens
Since "Kconfig: split the s390 base menu" CONFIG_KEXEC gets always selected. Therefore there is no point in keeping CONFIG_KEXEC anywhere. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/irq: use designated initializers for irq class arrayHeiko Carstens
Use designated initializers for the irq class array in irq.c so it's always guaranteed that the order of elements is equal to their corresponding parts in irq.h. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390: add uninitialized_var() to suppress false positive compiler warningsHeiko Carstens
Get rid of these: arch/s390/kernel/smp.c:134:19: warning: ‘status’ may be used uninitialized in this function [-Wuninitialized] arch/s390/mm/pgtable.c:641:10: warning: ‘table’ may be used uninitialized in this function [-Wuninitialized] arch/s390/mm/pgtable.c:644:12: warning: ‘page’ may be used uninitialized in this function [-Wuninitialized] drivers/s390/cio/cio.c:1037:14: warning: ‘schid’ may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/crashdump: move fill_cpu_elf_notes() prototype to header fileHeiko Carstens
Move fill_cpu_elf_notes() prototype to header file. This way we get compile errors if e.g. the number of function parameters get changed. Otherwise it's possible to change just the definition and everything else still compiles fine, but the result is broken code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/process: add missing header includeHeiko Carstens
Add appropriate header file: arch/s390/kernel/process.c:327:15: warning: symbol 'arch_align_stack' was not declared. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/ptrace: add missing ifdefHeiko Carstens
if (MACHINE_HAS_TE) translates to if (0) on !CONFIG_64BIT however the compiler still warns about invalid shifts within non-reachable code. So add an explicit ifdef to get rid of this warning: arch/s390/kernel/ptrace.c: In function ‘update_per_regs’: arch/s390/kernel/ptrace.c:63:4: warning: left shift count >= width of type [enabled by default] arch/s390/kernel/ptrace.c:65:4: warning: left shift count >= width of type [enabled by default] Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/ipl,decrompressor: disable branch profilingHeiko Carstens
The early kernel decrompressing code can't call into the kernel in order to profile branches. Fixes this link error: arch/s390/boot/compressed/misc.o: In function `decompress_kernel': misc.c:(.text+0x9a6): undefined reference to `ftrace_likely_update' Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/perf_events: compile only for CONFIG_64BITHeiko Carstens
The whole hardware support is only available in zArch mode. Fixes also this compile warning: arch/s390/kernel/perf_cpum_cf.c: In function ‘cpumf_pmu_init’: arch/s390/kernel/perf_cpum_cf.c:670:2: warning: left shift count >= width of type [enabled by default] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/topology: use for_each_set_bit to simplify the codeWei Yongjun
Use for_each_set_bit() to simplify the code. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/syscalls: wire up kcmp system callHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/appldata: change return value of appldata_asmHeiko Carstens
Change return value of appldata_asm() to -EOPNOTSUPP in case of an error. The return value was only used internally and not passed to user space. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/kexec: change return value of machine_kexec_prepareHeiko Carstens
Returning -ENOSYS on kexec_load() is a bad idea since user space cannot tell if the system call is not implmented or if it failed. Use -EOPNOTSUPP in case somebody tries a kexec_load on a NSS image based kernel instead. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/etr,stp: use -EOPNOTSUPP instead of -ENOSYSHeiko Carstens
Change -ENOSYS to -EOPNOTSUPP. Return value is used only internally. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/sysinfo,stsi: change return code handlingHeiko Carstens
Change return code handling of the stsi() function: In case function code 0 was specified the return value is the current configuration level (already shifted). That way all the code that actually copied the stsi_0() function can go away. Otherwise the return value is 0 (success) or negative to indicate an error (currently only -EOPNOTSUPP). Also stsi() is no longer an inline function. The function is not performance critical, but every caller would generate an exception table entry for this function. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/exceptions: switch to relative exception table entriesHeiko Carstens
This is the s390 port of 70627654 "x86, extable: Switch to relative exception table entries". Reduces the size of our exception tables by 50% on 64 bit builds. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/scm: remove superfluous lockSebastian Ott
Remove the spinlock from struct scm_device. drvdata and attributes are guarded via device_lock. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/smp,topology: add polarization member to pcpu structHeiko Carstens
The cpu polarization member is the only per cpu state that is not part of the pcpu structure. So add it there and have everything in one place. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/sysinfo,topology: fix cpu topology maximum nesting detectionHeiko Carstens
The maximum nesting of the cpu topology is evaluated when /proc/sysinfo is the first time read. This happens without a lock and a concurrent reader on a different cpu can see and use an invalid intermediate value. Besides the fact that this race is quite unlikely the worst thing that could happen is that /proc/sysinfo would contain bogus information about the machine's cpu topology. Nevertheless this should be fixed. So move the detection code to the early machine detection code and since now the value is early available use it in the topology code as well. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/mm: implement __get_user_pages_fast()Gerald Schaefer
This patch introduces the __get_user_pages_fast() function on s390, which will be needed with CONFIG_TRANSPARENT_HUGEPAGE and futex. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/sysinfo: add additional z196 fields to outputHeiko Carstens
Add a couple of missing fields that were introduced with z196. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/sysinfo: convert /proc/sysinfo to seqfileHeiko Carstens
The current proc implementation of the /proc/sysinfo file writes all informations contained in all system information blocks to a single page. This is done by calling sprintf all the time in the expectation that everything will fit into a single page. This however is not necessarily true if the configuration of a machine is very large. So convert /proc/sysinfo to avoid writing into random memory regions. For readability reasons a couple of lines are longer than 80 characters. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/topology: remove sysinfo header include, add forward declaration insteadHeiko Carstens
Any change to sysinfo.h causes a whole kernel recompile since sysinfo.h is included by topology.h, which again is used nearly everywhere. So remove that include and add a forward declaration instead. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/mm: shorten addressing mode initializationHeiko Carstens
Shorten the code for addressing mode initialization. Also add missing __init annotations, since this code is only used during kernel initialization. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/mm: rename addressing_mode to s390_user_modeHeiko Carstens
Renaming the globally visible variable "user_mode" to "addressing_mode" in order to fix a name clash was not a good idea. (Commit 37fe1d73 "s390/mm: rename user_mode variable to addressing_mode") Looking at the code after a couple of weeks one thinks: addressing mode of what? So rename the variable again. This time to s390_user_mode. Which hopefully makes more sense. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/mm: change default addressing modeHeiko Carstens
Change the default addressing mode so that user space runs in primary space and the kernel runs in home space. In addition remove the "switch_amode" kernel parameter so all users who already specified they want the new default behaviour will stay in the "switched" mode instead of in the opposite they intended. If there is a need to switch addressing modes, this can be done with the "user_mode" kernel parameter: user_mode=home Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/smp: avoid concurrent write to sigp status fieldHeiko Carstens
When a sigp instruction is issued it may store a status. This status is currently stored in a per cpu field of the target cpu. If multiple cpus issue a sigp instruction with the same target cpu and a status is stored the result is not necessarily as expected. Currently this is not an issue: - on cpu hotplug no sigps, except "restart" and "sense" are sent to the target cpu. - on external call we don't look at the status if it is stored - on sense running the condition code "status stored" is sufficient to tell if a cpu is running or not Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-18 03:18:10 +0000