summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2013-02-19xen: implement updated XENMEM_add_to_physmap_range ABIIan Campbell
Allows for more fine grained error reporting. Only used by PVH and ARM both of which are marked EXPERIMENTAL precisely because the ABI is not yet stable Signed-off-by: Ian Campbell <ian.campbell@citrix.com> [v1: Rebased without PVH patches] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-19xen/smp: Move the common CPU init code a bit to prep for PVH patch.Konrad Rzeszutek Wilk
The PV and PVH code CPU init code share some functionality. The PVH code ("xen/pvh: Extend vcpu_guest_context, p2m, event, and XenBus") sets some of these up, but not all. To make it easier to read, this patch removes the PV specific out of the generic way. No functional change - just code movement. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> [v2: Fixed compile errors noticed by Fengguang Wu build system] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-19Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "Main changes: - scheduler side full-dynticks (user-space execution is undisturbed and receives no timer IRQs) preparation changes that convert the cputime accounting code to be full-dynticks ready, from Frederic Weisbecker. - Initial sched.h split-up changes, by Clark Williams - select_idle_sibling() performance improvement by Mike Galbraith: " 1 tbench pair (worst case) in a 10 core + SMT package: pre 15.22 MB/sec 1 procs post 252.01 MB/sec 1 procs " - sched_rr_get_interval() ABI fix/change. We think this detail is not used by apps (so it's not an ABI in practice), but lets keep it under observation. - misc RT scheduling cleanups, optimizations" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched/rt: Add <linux/sched/rt.h> header to <linux/init_task.h> cputime: Remove irqsave from seqlock readers sched, powerpc: Fix sched.h split-up build failure cputime: Restore CPU_ACCOUNTING config defaults for PPC64 sched/rt: Move rt specific bits into new header file sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice sched: Move sched.h sysctl bits into separate header sched: Fix signedness bug in yield_to() sched: Fix select_idle_sibling() bouncing cow syndrome sched/rt: Further simplify pick_rt_task() sched/rt: Do not account zero delta_exec in update_curr_rt() cputime: Safely read cputime of full dynticks CPUs kvm: Prepare to add generic guest entry/exit callbacks cputime: Use accessors to read task cputime stats cputime: Allow dynamic switch between tick/virtual based cputime accounting cputime: Generic on-demand virtual cputime accounting cputime: Move default nsecs_to_cputime() to jiffies based cputime file cputime: Librarize per nsecs resolution cputime definitions cputime: Avoid multiplication overflow on utime scaling context_tracking: Export context state for generic vtime ... Fix up conflict in kernel/context_tracking.c due to comment additions.
2013-02-19Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf changes from Ingo Molnar: "There are lots of improvements, the biggest changes are: Main kernel side changes: - Improve uprobes performance by adding 'pre-filtering' support, by Oleg Nesterov. - Make some POWER7 events available in sysfs, equivalent to what was done on x86, from Sukadev Bhattiprolu. - tracing updates by Steve Rostedt - mostly misc fixes and smaller improvements. - Use perf/event tracing to report PCI Express advanced errors, by Tony Luck. - Enable northbridge performance counters on AMD family 15h, by Jacob Shin. - This tracing commit: tracing: Remove the extra 4 bytes of padding in events changes the ABI. All involved parties (PowerTop in particular) seem to agree that it's safe to do now with the introduction of libtraceevent, but the devil is in the details ... Main tooling side changes: - Add 'event group view', from Namyung Kim: To use it, 'perf record' should group events when recording. And then perf report parses the saved group relation from file header and prints them together if --group option is provided. You can use the 'perf evlist' command to see event group information: $ perf record -e '{ref-cycles,cycles}' noploop 1 [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ] $ perf evlist --group {ref-cycles,cycles} With this example, default perf report will show you each event separately. You can use --group option to enable event group view: $ perf report --group ... # group: {ref-cycles,cycles} # ======== # Samples: 7K of event 'anon group { ref-cycles, cycles }' # Event count (approx.): 6876107743 # # Overhead Command Shared Object Symbol # ................ ....... ................. .......................... 99.84% 99.76% noploop noploop [.] main 0.07% 0.00% noploop ld-2.15.so [.] strcmp 0.03% 0.00% noploop [kernel.kallsyms] [k] timerqueue_del 0.03% 0.03% noploop [kernel.kallsyms] [k] sched_clock_cpu 0.02% 0.00% noploop [kernel.kallsyms] [k] account_user_time 0.01% 0.00% noploop [kernel.kallsyms] [k] __alloc_pages_nodemask 0.00% 0.00% noploop [kernel.kallsyms] [k] native_write_msr_safe 0.00% 0.11% noploop [kernel.kallsyms] [k] _raw_spin_lock 0.00% 0.06% noploop [kernel.kallsyms] [k] find_get_page 0.00% 0.02% noploop [kernel.kallsyms] [k] rcu_check_callbacks 0.00% 0.02% noploop [kernel.kallsyms] [k] __current_kernel_time As you can see the Overhead column now contains both of ref-cycles and cycles and header line shows group information also - 'anon group { ref-cycles, cycles }'. The output is sorted by period of group leader first. - Initial GTK+ annotate browser, from Namhyung Kim. - Add option for runtime switching perf data file in perf report, just press 's' and a menu with the valid files found in the current directory will be presented, from Feng Tang. - Add support to display whole group data for raw columns, from Jiri Olsa. - Add per processor socket count aggregation in perf stat, from Stephane Eranian. - Add interval printing in 'perf stat', from Stephane Eranian. - 'perf test' improvements - Add support for wildcards in tracepoint system name, from Jiri Olsa. - Add anonymous huge page recognition, from Joshua Zhu. - perf build-id cache now can show DSOs present in a perf.data file that are not in the cache, to integrate with build-id servers being put in place by organizations such as Fedora. - perf top now shares more of the evsel config/creation routines with 'record', paving the way for further integration like 'top' snapshots, etc. - perf top now supports DWARF callchains. - Fix mmap limitations on 32-bit, fix from David Miller. - 'perf bench numa mem' NUMA performance measurement suite - ... and lots of fixes, performance improvements, cleanups and other improvements I failed to list - see the shortlog and git log for details." * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (270 commits) perf/x86/amd: Enable northbridge performance counters on AMD family 15h perf/hwbp: Fix cleanup in case of kzalloc failure perf tools: Fix build with bison 2.3 and older. perf tools: Limit unwind support to x86 archs perf annotate: Make it to be able to skip unannotatable symbols perf gtk/annotate: Fail early if it can't annotate perf gtk/annotate: Show source lines with gray color perf gtk/annotate: Support multiple event annotation perf ui/gtk: Implement basic GTK2 annotation browser perf annotate: Fix warning message on a missing vmlinux perf buildid-cache: Add --update option uprobes/perf: Avoid uprobe_apply() whenever possible uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVE uprobes/perf: Teach trace_uprobe/perf code to pre-filter uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event's uprobes: Introduce uprobe_apply() perf: Introduce hw_perf_event->tp_target and ->tp_list uprobes/perf: Always increment trace_uprobe->nhit uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into trace_uprobe uprobes/tracing: Introduce is_trace_uprobe_enabled() ...
2013-02-19Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq core changes from Ingo Molnar: "The biggest changes are the IRQ-work and printk changes from Frederic Weisbecker, which prepare the code for 'full dynticks' (the ability to stop or slow down the periodic tick arbitrarily, not just in idle time as today): - Don't stop tick with irq works pending. This fix is generally useful and concerns archs that can't raise self IPIs. - Flush irq works before CPU offlining. - Introduce "lazy" irq works that can wait for the next tick to be executed, unless it's stopped. - Implement klogd wake up using irq work. This removes the ad-hoc printk_tick()/printk_needs_cpu() hooks and make it working even in dynticks mode. - Cleanups and fixes." * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Export enable/disable_percpu_irq() arch Kconfig: Remove references to IRQ_PER_CPU irq_work: Remove return value from the irq_work_queue() function genirq: Avoid deadlock in spurious handling printk: Wake up klogd using irq_work irq_work: Make self-IPIs optable irq_work: Warn if there's still work on cpu_down irq_work: Flush work on CPU_DYING irq_work: Don't stop the tick with pending works nohz: Add API to check tick state irq_work: Remove CONFIG_HAVE_IRQ_WORK irq_work: Fix racy check on work pending flag irq_work: Fix racy IRQ_WORK_BUSY flag setting
2013-02-20Merge remote-tracking branch 'agust/next' into nextBenjamin Herrenschmidt
<< Please pull mpc5xxx patches for v3.9. The bestcomm driver is moved to drivers/dma (so it will be usable for ColdFire). mpc5121 now provides common dtsi file and existing mpc5121 device trees use it. There are some minor clock init and sparse fixes and updates for various 5200 device tree files from Grant. Some fixes for bugs in the mpc5121 DIU driver are also included here (Andrew Morton suggested to push them via my mpc5xxx tree). >>
2013-02-19Merge tag 'arm-imx-clk-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 ↵Arnd Bergmann
into next/fixes-non-critical ARM: i.MX: clock fixes - fix wrong timer clock on i.MX25 leading to strange timing inconsistencies - fix SPI clocks for i.MX27 * tag 'arm-imx-clk-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: ARM: i.MX25: clk: parent per5_clk to AHB clock ARM: imx27: clk-imx27: SPI: Rename IPG clock and add PER clock Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-19Merge tag 'tegra-for-3.9-soc-ccf-fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/dt ARM: tegra: common clock framework fixes A number of small fixes are included to the new Tegra common clock driver. These are: Missing locking, definition of device tree clock IDs not matching the binding, a static cleanup, missing initialization of some UART clocks. This branch is based on Tegra's previous pull request tegra-for-3.9-dt. This dependency is caused by the one patch that edits the device tree. If this causes a problem, I can drop the final two patches in this pull request for now, and rebase it onto previous tegra-for-3.9-soc-ccf instead. * tag 'tegra-for-3.9-soc-ccf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: clk: tegra: initialise parent of uart clocks ARM: tegra: remove clock-frequency properties from serial nodes clk: tegra: fix driver to match DT binding clk: tegra: local arrays should be static clk: tegra: Add missing spinlock for hclk and pclk clk: tegra: Implement locking for super clock clk: tegra: fix wrong clock index between se to sata_cold (applied to next/dt branch rather than next/soc because of the dependency) Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-19Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree"Arnd Bergmann
This reverts commit 0749a4424b5cb23262661e914d84b504c1d1d34f. The patch caused a build problem in allyesconfig by referencing an undefined device tree label 'pio'. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-19Revert "sunxi: a13-olinuxino: Add user LED to the device tree"Arnd Bergmann
This reverts commit 867dc8beba816695485f61c2c4ad80f11073c280. The patch caused a build problem in allyesconfig by referencing an undefined device tree label 'pio'. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-19Merge tag 'omap-for-v3.9/usb-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc These changes contain the OMAP USB related platform data changes that were dropped from linux next because of the merge conflicts as requested by me and Olof. The reason was that at this point we really should be able to do the arch/arm related changes separately from driver changes to avoid dependencies between branches. These patches were initially part of the USB related MFD patches. Based on our comments, Roger Quadros quickly reworked these patches into a shared branch between ARM SoC tree and the MFD tree, then separate patches for the OMAP platform data and MFD driver. Note that this branch will conflict with c1d1cd597fc7 ("ARM: OMAP2+: omap_device: remove obsolete pm_lats and early_device code"). Please see http://lkml.org/lkml/2013/2/11/16 for the merge resolution. [arnd - resolved the merge conflict] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-19x86, kvm: Add MSR_AMD64_BU_CFG2 to the list of ignored MSRsBorislav Petkov
The "x86, AMD: Enable WC+ memory type on family 10 processors" patch currently in -tip added a workaround for AMD F10h CPUs which #GPs my guest when booted in kvm. This is because it accesses MSR_AMD64_BU_CFG2 which is not currently ignored by kvm. Do that because this MSR is only baremetal-relevant anyway. While at it, move the ignored MSRs at the beginning of kvm_set_msr_common so that we exit then and there. Acked-by: Gleb Natapov <gleb@redhat.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Andre Przywara <andre@andrep.de> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1361298793-31834-2-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-19x86, cpu, amd: Fix WC+ workaround for older virtual hostsBorislav Petkov
The WC+ workaround for F10h introduces a new MSR and kvm host #GPs on accesses to unknown MSRs if paravirt is not compiled in. Use the exception-handling MSR accessors so as not to break 3.8 and later guests booting on older hosts. Remove a redundant family check while at it. Cc: Gleb Natapov <gleb@redhat.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1361298793-31834-1-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-19Merge remote-tracking branch 'kumar/next' into nextBenjamin Herrenschmidt
<< Mostly misc code cleanups in various board ports and adding support for a new MPC85xx board - ppa8548. >>
2013-02-19powerpc/85xx: l2sram - Add compatible string for BSC9131 platformHarninder Rai
Signed-off-by: Harninder Rai <harninder.rai@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-19powerpc/85xx: bsc9131 - Correct typo in SDHC device nodeHarninder Rai
BSC9131RDB doesn't have SDHC enabled. As a result of this typo, the node was not getting disabled from the device tree which was leading to linux hang during bootup Signed-off-by: Harninder Rai <harninder.rai@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-19Merge branch 'imx/cpuidle' into late/dtArnd Bergmann
This resolves one non-obvious merge conflict between the imx cpuidle patches and the imx DT changes for 3.9. Conflicts: arch/arm/mach-imx/mach-imx6q.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-19Merge tag 'renesas-soc5-for-v3.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc This resolves a panic-on-boot regression introduced by me when incorrectly updating TMU clock definitions. * tag 'renesas-soc5-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7779: Correct TMU clock support again Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-19ARM: SPEAr13xx: Enable CONFIG_ARCH_HAS_CPUFREQViresh Kumar
SPEAr13xx supports cpufreq and has an upstreamed driver for it. This patch enables cpufreq configs for SPEAr13xx. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-19Merge branches 'core', 'arm/omap', 'iommu/fixes', 'arm/tegra', ↵Joerg Roedel
'arm/shmobile', 'arm/exynos', 'x86/vt-d' and 'x86/amd' into next
2013-02-19MIPS: remove broken conditional inside vpe loader codeJohn Crispin
The commit [1] breaks builds and results in the following error arch/mips/kernel/vpe.c: In function 'vpe_run': arch/mips/kernel/vpe.c:708:16: error: invalid type argument of '->' (have 'struct list_head') Taking a closer look at the conditional we notice that list_first_entry wont ever return NULL. The easiest fix is to just drop the dead code. [1] commit 3d2d03247632920aa21b42a0b032a4ffd44ce15e MIPS: vpe.c: Fix null pointer dereference in print arguments. Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: SMTC: fix implicit declaration of set_vi_handlerFlorian Fainelli
This patch fixes the following implicit declaration while building with MIPS SMTC support enabled: arch/mips/kernel/smtc.c: In function 'setup_cross_vpe_interrupts': arch/mips/kernel/smtc.c:1205:2: error: implicit declaration of function 'set_vi_handler' [-Werror=implicit-function-declaration] cc1: all warnings being treated as errors Signed-off-by: Florian Fainelli <florian@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4931/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: early_printk: drop __init annotationsAaro Koskinen
We cannot use __init for earlyprintk code or data, since the kernel parameter "keep_bootcon" allows leaving the boot console enabled. Currently MIPS will crash/hang/die if you use keep_bootcon. The patch fixes it at least on Lemote FuLoong mini-PC. Changes for other boards were done based on what I could find with grep... Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Patchwork: http://patchwork.linux-mips.org/patch/4935/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: Probe for and report hardware virtualization support.David Daney
The presence of the MIPS Virtualization Application-Specific Extension is indicated by CP0_Config3[23]. Probe for this and report it in /proc/cpuinfo. Signed-off-by: David Daney <david.daney@cavium.com> Patchwork: http://patchwork.linux-mips.org/patch/4904/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: ath79: add support for the Qualcomm Atheros AP136-010 boardGabor Juhos
Also enable the board in the default configuration. Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> Cc: Giori, Kathy <kgiori@qca.qualcomm.com> Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4953/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: ath79: add USB controller registration code for the QCA955X SoCsGabor Juhos
Register platfom devices for the built-in USB controllers of the SoCs. Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> Cc: Giori, Kathy <kgiori@qca.qualcomm.com> Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4952/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: ath79: add PCI controller registration code for the QCA955X SoCsGabor Juhos
Add SoC specific PCI IRQ map, and register platform devices for the two built-in PCIe RCs. Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> Cc: Giori, Kathy <kgiori@qca.qualcomm.com> Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4951/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: ath79: add WMAC registration code for the QCA955X SoCsGabor Juhos
The SoC has a built-in wireless MAC. Register a platform device for that to make it usable with the ath9k driver. Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> Cc: Giori, Kathy <kgiori@qca.qualcomm.com> Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4956/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: ath79: register UART for the QCA955X SoCsGabor Juhos
Similarly to the preceding SoCs, the QCA955X SoCs also have a built-in NS16650 compatible UART. Register the platform device for that to make it usable. Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> Cc: Giori, Kathy <kgiori@qca.qualcomm.com> Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4949/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}Gabor Juhos
The ath79_device_reset_* are causing BUG when those are used on the QCA955x SoCs. The patch adds the required code to avoid that. Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> Cc: Giori, Kathy <kgiori@qca.qualcomm.com> Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4948/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: ath79: add GPIO setup code for the QCA955X SoCsGabor Juhos
The existing code can handle the GPIO controller of the QCA955x SoCs. Add a minimal glue code to make it working. Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> Cc: Giori, Kathy <kgiori@qca.qualcomm.com> Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4947/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: ath79: add IRQ handling code for the QCA955X SoCsGabor Juhos
The IRQ routing in the QCA955x SoCs is slightly different from the routing implemented in the already supported SoCs. Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> Cc: Giori, Kathy <kgiori@qca.qualcomm.com> Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4955/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: ath79: add clock setup code for the QCA955X SoCsGabor Juhos
The patch adds code to get various clock frequencies from the PLLs used in the QCA955x SoCs. Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> Cc: Giori, Kathy <kgiori@qca.qualcomm.com> Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4945/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: ath79: add SoC detection code for the QCA955X SoCsGabor Juhos
Also add 'soc_is_qca955[68x]' helper functions and a Kconfig symbol for the SoC family. Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> Cc: Giori, Kathy <kgiori@qca.qualcomm.com> Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4943/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: ath79: add early printk support for the QCA955X SoCsGabor Juhos
The patch allows to see kernel messages on the QCA955X SoCs in early boot stage. Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> Cc: Giori, Kathy <kgiori@qca.qualcomm.com> Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4944/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: ath79: fix WMAC IRQ resource assignmentGabor Juhos
The '.start' field of the IRQ resource assigned twice in ar934x_wmac_setup(). The second assignment must set the '.end' field. Fix it. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4954/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19mips: reserve elfcorehdrCorey Minyard
/proc/vmcore wasn't showing up in kdump kernels. It turns that that for Octeon, the memory used by elfcorehdr wasn't being set aside properly and it was getting clobbered before /proc/vmcore could get it. So reserve the memory if it shows up in a memory area managed by the kernel. Signed-off-by: Corey Minyard <cminyard@mvista.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Cc: Ralf Baechle <ralf@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/4936/
2013-02-19mips: Make sure kernel memory is in iomemCorey Minyard
Kernel memory isn't necessarily added to the memory tables, so it wouldn't show up in /proc/iomem. This was breaking kdump, which requires these memory addresses to work correctly. Signed-off-by: Corey Minyard <cminyard@mvista.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Cc: Ralf Baechle <ralf@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/4937/
2013-02-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net into netDavid S. Miller
Pull in 'net' to take in the bug fixes that didn't make it into 3.8-final. Also, deal with the semantic conflict of the change made to net/ipv6/xfrm6_policy.c A missing rt6->n neighbour release was added to 'net', but in 'net-next' we no longer cache the neighbour entries in the ipv6 routes so that change is not appropriate there. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18x86: pvclock kvm: align allocation size to page sizeMarcelo Tosatti
To match whats mapped via vsyscalls to userspace. Reported-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-02-19ARM: shmobile: r8a7779: Correct TMU clock support againSimon Horman
After discussion on the linux-sh mailing list and reference to the hardware documentation it appears that 'TMU00', 'TMU01' and 'TMU02' use a common clock. The sh_tmu.1 portion of this change resolves a regression introduced in 58079fa7d54a0929d304054ee759187a2ccd3cdf (ARM: shmobile: r8a7779: Correct TMU clock support) and fixes a regression introduced by that patch. That patch is queued up for v3.9. ... hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected INFO: rcu_sched self-detected stall on CPUINFO: rcu_sched detected stalls on +CPUs/tasks: { 1} (detected by 2, t=279640 jiffies, g=4294967052, c=4294967051, +q=38) Task dump for CPU 1: swapper/0 R running 0 1 0 0x00000002 [<c02b8f5c>] (__schedule+0x1b0/0x4c0) from [<c013c590>] (__loop_delay+0x4/0xc) { 1} (t=279640 jiffies g=4294967052 c=4294967052 q=37) [<c000ef9c>] (unwind_backtrace+0x0/0xf8) from [<c0068488>] +(rcu_check_callbacks+0x218/0x6b8) [<c0068488>] (rcu_check_callbacks+0x218/0x6b8) from [<c0026774>] +(update_process_times+0x38/0x4c) [<c0026774>] (update_process_times+0x38/0x4c) from [<c00569e0>] +(tick_nohz_handler+0xb4/0x11c) [<c00569e0>] (tick_nohz_handler+0xb4/0x11c) from [<c000e518>] +(twd_handler+0x34/0x44) [<c000e518>] (twd_handler+0x34/0x44) from [<c0063484>] +(handle_percpu_devid_irq+0x68/0x80) [<c0063484>] (handle_percpu_devid_irq+0x68/0x80) from [<c005febc>] +(generic_handle_irq+0x20/0x30) [<c005febc>] (generic_handle_irq+0x20/0x30) from [<c000a5ec>] +(handle_IRQ+0x40/0x90) [<c000a5ec>] (handle_IRQ+0x40/0x90) from [<c000934c>] (gic_handle_irq+0x2c/0x5c) [<c000934c>] (gic_handle_irq+0x2c/0x5c) from [<c0009a40>] (__irq_svc+0x40/0x50) Exception stack(0xef03ddf8 to 0xef03de40) dde0: 000001c1 ffffffff de00: 000001d8 01bf01bf ef35ec40 ef35e800 ef35ec6c 0000002b ef35ec68 c013c560 de20: c0392994 60000113 00000000 ef03de40 c01a5d40 c013c590 20000113 ffffffff [<c0009a40>] (__irq_svc+0x40/0x50) from [<c013c590>] (__loop_delay+0x4/0xc) Cc: Denis Oliver Kropp <dok@directfb.org> Cc: Magnus Damm <damm@opensource.se> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-02-18Merge branch 'release' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (35 commits) PM idle: remove global declaration of pm_idle unicore32 idle: delete stray pm_idle comment openrisc idle: delete pm_idle mn10300 idle: delete pm_idle microblaze idle: delete pm_idle m32r idle: delete pm_idle, and other dead idle code ia64 idle: delete pm_idle cris idle: delete idle and pm_idle ARM64 idle: delete pm_idle ARM idle: delete pm_idle blackfin idle: delete pm_idle sparc idle: rename pm_idle to sparc_idle sh idle: rename global pm_idle to static sh_idle x86 idle: rename global pm_idle to static x86_idle APM idle: register apm_cpu_idle via cpuidle tools/power turbostat: display SMI count by default intel_idle: export both C1 and C1E cpuidle: remove vestage definition of cpuidle_state_usage.driver_data x86 idle: remove 32-bit-only "no-hlt" parameter, hlt_works_ok flag x86 idle: remove mwait_idle() and "idle=mwait" cmdline param ... Conflicts: arch/x86/kernel/process.c (with PM / tracing commit 43720bd) drivers/acpi/processor_idle.c (with ACPICA commit 4f84291)
2013-02-18Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/dvm/tx.c drivers/net/wireless/ti/wlcore/sdio.c drivers/net/wireless/ti/wlcore/spi.c
2013-02-18x86/memtest: Shorten time for testsAlexander Holler
By just reversing the order memtest is using the test patterns, an additional round to zero the memory is not necessary. This might save up to a second or even more for setups which are doing tests on every boot. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1361029097-8308-1-git-send-email-holler@ahsoftware.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-18Merge branch 'misc' into releaseLen Brown
Conflicts: arch/x86/kernel/process.c Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-18Merge branches 'idle-remove-statedata', 'pm_idle' and 'idle-hsw-turbostat' ↵Len Brown
into release
2013-02-17unicore32 idle: delete stray pm_idle commentLen Brown
as pm_idle() has already been deleted from this code, the comment was a stray. Signed-off-by: Len Brown <len.brown@intel.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
2013-02-17openrisc idle: delete pm_idleLen Brown
pm_idle() on openrisc was dead code. Signed-off-by: Len Brown <len.brown@intel.com> Cc: linux@lists.openrisc.net
2013-02-17mn10300 idle: delete pm_idleLen Brown
pm_idle on mn10300 served no purpose. Signed-off-by: Len Brown <len.brown@intel.com> Cc: linux-am33-list@redhat.com
2013-02-17microblaze idle: delete pm_idleLen Brown
pm_idle on microblaze served no purpose. Signed-off-by: Len Brown <len.brown@intel.com> Cc: microblaze-uclinux@itee.uq.edu.au