summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2010-07-26iomux-mx51: add 4 pin definitionsEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26i.MX51: handle IRQ for gpio 16..31Eric Bénard
The i.MX51 generates 2 IRQ for each GPIO bank : one for gpio 0 to 15 and one for gpio 16 to 31. Actually only the lower IRQ is registered so register the second one. Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26eukrea_mbimx27-baseboard: fix compile when CONFIG_SPI_IMX is disabledEric Bénard
the i2c_board_info structure landed into the SPI #if/#endif which is wrong. Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26imx25: fix low level debugEric Bénard
DEBUG_LL is actually broken on i.MX25, this patch fix it. Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx51_3ds: add keypad support on 3ds platformJason Wang
Add keymaps and imx_keypad device registration for imx51_3ds board. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx51: add imx_keypad device definition for mx51 platformsJason Wang
add imx_keypad platform device definition and clocks for mx51 platforms. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx51_3ds: Add support for the imx51 3-stack boardJason Wang
3-stack is a reference board from Freescale for their i.MX51 SoC. Add board definition, Kconfig and Makefile to enable Freescale 3-stack board. Boot tested on a i.MX51 3-stack Rev2.0 board Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx27_3ds: add support for the keypadRogerio Pimentel
mx27_3ds: add support for the keypad Signed-off-by: Rogerio Pimentel <rogerio.pimentel@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx31_3ds: revert 3ds debug board relate codeJason Wang
Because we add a 3ds debug board support in mxc level, we remove those redundant codes from board level. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mxc: add common debug board for 3-stack platformsJason Wang
The debug board is little different for all mxc 3-stack(PDK) platforms, it is possible here to add a common implementation to support this board. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26Merge branch 'imx/for-2.6.36' of git://git.pengutronix.de/git/ukl/linux-2.6 ↵Uwe Kleine-König
into HEAD There are some more conflicts than detected by git, namely support for the newly added cpuimx machines needed to be converted to dynamic device registration. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Conflicts: arch/arm/mach-imx/Makefile arch/arm/mach-imx/devices.c arch/arm/mach-imx/devices.h arch/arm/mach-imx/eukrea_mbimx27-baseboard.c arch/arm/mach-mx2/Kconfig arch/arm/mach-mx25/Makefile arch/arm/mach-mx25/devices.c arch/arm/plat-mxc/include/mach/mx25.h arch/arm/plat-mxc/include/mach/mxc_nand.h
2010-07-26mx25: add PWM4 to iomuxBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx25: add iomux defines for UART4 on KPP pinsBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx31_3ds: Handle USB OTG GPIO ErrorsFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx25: add support for the CSI deviceBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx27: add support for the CSI deviceBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26pca100: clean up GPIO pin multiplexingLuotao Fu
cleaned up some duplicated mxc_gpio_mode calls and move the correpsonding pin multiplexing either into the initial pin config table or ifdef blocks. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26pca100: add framebuffer device support and TFTLuotao Fu
this one adds the frambuffer device and a TFT panel to the PhyCard-S (pca100) board. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mxc/iomux: add GPIO bank offset for iomux v3 platformsJason Wang
These GPIO bank offsets are useful when define a gpio number. E.G. when GPIO PORTC pin 6 is used for irq request pin of external expanding device, we can define it like: #define EXP_PARENT_IRQ_PIN (GPIO_PORTC + 6) Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx51/iomux: add UART and GPIO pad definitions for imx51_3ds boardJason Wang
Add UART2 CTS/RTS and UART3 RXD/TXD pad definitons for imx51_3ds board, add GPIO_1_6 definiton because this pin is used as a CPLD parent irq request pin on imx51_3ds board. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx51/iomux: Fix mux mode and input path for two padsJason Wang
For pad EIM_D27 to work in UART3_RTS mode, the input path should be 3 instead of 0; for pad USBH1_STP to work in GPIO_1_27 mode, the mux value should be 2 instead of 8. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26[PATCH] mxc: Fix pad names for imx51Amit Kucheria
The pads capable of being used as GPIOs had their pad-name and mode-name switched. Also, fix the following: - Whitespace fixes - Replace IOMUX_CONFIG_ALTn with 'n' Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26i.MX35: add cpuimx35 support and its baseboardEric Bénard
* cpuimx35 integrates i.MX35, RAM, NAND, Ethernet, I2C RTC, USB Host, USB OTG and I2C touchscreen controller * mbimxsd provides access to LCD, Audio, LED, Switch button, UART ... Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx25: add a comment documenting undocumented IPG clocksBaruch Siach
The information in the i.MX25 Reference Manual is lacking. Add information from the Freescale BSP. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx25pdk: register watchdog deviceBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx25: add watchdog clockBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26i.MX25: add cpuimx25 module and its baseboardEric Bénard
* cpuimx25 integrates i.MX25, RAM, NAND, Ethernet, I2C RTC, USB Host and USB OTG * mbimxsd provides access to LCD, Audio, LED, Switch button, UART ... Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26i.MX25: add AUDMUX and SSI supportEric Bénard
* add clocks for audmux and ssi 1 & 2 * add irq for ssi 1 & 2 * add devices platform for ssi1 & 2 * update audmux-v2 for i.MX25 * add base addresses for audmux & ssi 1 & 2 * add iomux configuration for GPIO for AUD5 port Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26i.MX25: fix get_rate_otg to return the correct valueEric Bénard
usb drivers need to get the right value for otg clock so calculate and return it Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26plat-mxc/ehci.c: add i.MX25 supportEric Bénard
i.MX25's OTG has the same USBCTRL registers than i.MX35 so reuse most of the i.MX35's defines. Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26MX25: put define for OTG base address in right includeEric Bénard
the standard place for this define is include/mach/mx25.h Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26i.MX27: add suspend to RAM supportEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26eukrea_mbimx27: fix audio support when SOC is compiled as moduleEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mach-cpuimx27: fix USB_ULPI build warningsEric Bénard
when CONFIG_USB_ULPI is not defined we actually get : warning: 'otg_pdata' defined but not used warning: 'usbh2_pdata' defined but not used Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: linux-arm-kernel@lists.infradead.org Cc: s.hauer@pengutronix.de Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26i.MX35: return IPU clock's value for mx3fbEric Bénard
without this patch, ipu_clk's value is 0 thus preventing mx3fb from calculating the right divisor for pixel clock generator. Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx5: Register i2c on Freescale MX51 Babbage HWDinh Nguyen
Add device registration and setup IOMUX pins in the mx51_babbage board feil. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx5: Add i2c to Freescale MX51 Babbage HWDinh Nguyen
This patch adds I2C functionality to the Freescale MX51 Babbage HW. The patch adds device structures, i2c board slave device defines, IOMUX pin defines, and clocks. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26arm: mxc: utilise usecount field in clock operationsAmit Kucheria
This patch fixes the clock refcounting when reparenting is used. Boot-tested on imx51 babbage board. Sascha pointed out a good explanation of refcounting here: http://www.spinics.net/lists/arm-kernel/msg85879.html Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx25pdk: add keypad supportBaruch Siach
The keymap is taken from the Freescale supplied kernel. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mx25: add platform code for imx-keypadBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mxc_nand: add support for platform defined partitionsBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26eukrea_mbimx27: add audio codecEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26eukrea_mbimx27: add support for the keyboardEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26MX2X: Add Keypad device definition for MX2X archEric Bénard
Based on work from Alberto Panizzo for MX3X Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26eukrea_mbimx27: use card detect through DAT3 for SDHC1Eric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mxcmmc: add card detect through DAT3 possibilityEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mach-cpuimx27: register wdt and w1_master resourcesEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mach-cpuimx27: add USB Host2 and OTG supportEric Bénard
support copied from mach-pca100.c Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26eukrea_mbimx27: fix ADS7846 supportEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26mach-cpuimx27: fix QuadUART's IRQ typo in pins'setupEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-29 19:32:28 +0000