summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2013-09-03Merge branch 'socfpga/dt' into next/dtOlof Johansson
SoCFPGA DT changes from Dinh Nguyen. * socfpga/dt: dts: Rename DW APB timer compatible strings dts: Deprecate ALTR as a vendor prefix of: add vendor prefix for Altera Corp. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-03Merge branch 'armsoc/for-3.12/dt' of git://github.com/broadcom/bcm11351 into ↵Olof Johansson
next/dt From Christian Daudt, DT changes for Broadcom. * 'armsoc/for-3.12/dt' of git://github.com/broadcom/bcm11351: ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) ARM: dts: add sdio blocks to bcm28155-ap board ARM: dts: align sdio numbers to HW definition ARM: bcm281xx: DT changes for reboot code ARM: bcm281xx: Adding bcm28155-ap.dts
2013-09-03Merge tag 'mxs-dt-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Kevin Hilman
into next/dt From Shawn Guo: It contains mxs device tree changes for 3.12. - New board addition and hogpins cleanup for Crystalfontz - New pinctrl entry addition for lcd, ssp2 and saif0 - Add alias and labels for various nodes - Enable devices like LRADC and USB for a couple of imx23 boards, and backlight for M28EVK * tag 'mxs-dt-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: dts: mxs: add pin config for LCD sync and clock pins ARM: dts: mxs: add pin config for SSP3 interface ARM: dts: mxs: add another set of saif0_pins (without MCLK) ARM: dts: mxs: add labels to most nodes for easier reference ARM: dts: mxs: whitespace cleanup ARM: dts: mxs: Add spi alias ARM: dts: imx23-olinuxino: enable Low Resolution ADC ARM: dts: imx23-evk: enable Low Resolution ADC ARM: dts: imx23-evk: enable USB PHY and controller ARM: dts: mxs: remove old DMA binding data from client nodes ARM: mxs: Add backlight support for M28EVK ARM: mxs: dt: cfa10036: make hogpins grabbed by respective drivers ARM: mxs: dt: cfa10057: remove hogpins ARM: mxs: dt: cfa10055: make hogpins grabbed by respective drivers ARM: mxs: dt: cfa10049: make hogpins grabbed by respective drivers ARM: mxs: dt: cfa10037: make hogpins grabbed by respective drivers ARM: mxs: dt: Add Crystalfontz CFA-10058 device tree ARM: mxs: dt: Add Crystalfontz CFA-10056 device tree
2013-08-29dts: Rename DW APB timer compatible stringsDinh Nguyen
"dw-apb-timer-osc" and "dw-apb-timer-sp" are the same implementation of the DW APB timer, just fed by different clocks. Thus, deprecate both "dw-apb-timer-osc" and "dw-apb-timer-sp" in lieu of "dw-apb-timer". Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> CC: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ian.campbell@citrix.com> CC: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> CC: Jamie Iles <jamie@jamieiles.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Pavel Machek <pavel@denx.de> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Olof Johansson <olof@lixom.net> v3: - Split out a separate that cleans up the timer entries and clock information. - Clearly states which binding is deprecated in the bindings doc. v2: - Deprecate the "dw-apb-timer-osc" and "dw-apb-timer-sp" but maintain backwards compatibility in the driver.
2013-08-22Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dtKevin Hilman
From Nicolas Ferre: More DT work on AT91: - sound support for at91sam9x5 family - at91sam9n12: touch button, i2c and gpio-keys - adding missing pinctrl-names to MCI on at91rm9200 and at91sam9260/9g20 - adding ARM Performance Monitor Unit (PMU) on sama5d3 * tag 'at91-dt' of git://github.com/at91linux/linux-at91: ARM: at91/dt: sam9x5ek: add sound configuration ARM: at91/dt: sam9x5ek: enable SSC ARM: at91/dt: sam9x5ek: add WM8731 codec ARM: at91/dt: sam9x5: add SSC DMA parameters ARM: at91/dt: add at91rm9200 PQFP package version ARM: at91: at91rm9200: set default mmc0 pinctrl-names ARM: at91: at91sam9n12: correct pin number of gpio-key ARM: at91: at91sam9n12: add qt1070 support ARM: at91: at91sam9n12: add pinctrl of TWI ARM: at91: Add PMU support for sama5d3 ARM: at91: at91sam9260: add missing pinctrl-names on mmc Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-08-22Merge tag 'nomadik-i2c-for-arm-soc' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt From Linus Walleij: Enables the standard Nomadik I2C driver for use on the original Nomadik instead of using a bit-banged driver. * tag 'nomadik-i2c-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: nomadik: switch to use the Nomadik I2C driver Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-08-22Merge tag 'samsung-dt-1' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt From Kukjin Kim: Samsung Exynos DT updates for v3.12 - update codec, pmic, usb hub for Arndale - add exynos4412-trats 2 board dt - update camera, spi, sensor for Trats2 - update fimc, sensor for Trats - add support tmu for exynos5440 - add support g2d for exynos5250 - correct camera pinctrl for exynos4x12 - add support camera subsystem for exynos4 - add support basic pm domain, fimd, dp for exynos5420 - add support secure-firmware for OrigenQuad - update mfc and add support mfc for exynos5420 - add usb host node for exynos4 * tag 'samsung-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (38 commits) ARM: dts: Add USB host node for Exynos4 ARM: dts: add audio clock controller for exynos5420 ARM: dts: Correct the /include entry on exynos5420 dtsi file ARM: dts: Add MFC node for exynos 5420 ARM: dts: Update 5250 MFC node ARM: dts: Remove unsused MFC clock from exynos4 ARM: dts: Update clocks entry in MFC binding documentation ARM: dts: Hook up internal PHY on Arndale ARM: dts: Enable USB hub on Arndale ARM: dts: Add secure-firmware boot support for OrigenQaud board ARM: dts: Add pin state information for DP HPD support to Exynos5420 ARM: dts: Add DP controller DT node to exynos5420 SoC ARM: dts: Update DP controller DT Node for Exynos5 based SoCs ARM: dts: Add FIMD DT node to exynos5420 DTS files ARM: dts: Add basic PM domains for EXYNOS5420 ARM: dts: Update FIMD DT node for Exynos5 SoCs ARM: dts: Move display-timing information inside FIMD DT node for exynos5250 ARM: dts: Add S5K5BA sensor regulator definitions for Trats board ARM: dts: Add Exynos4210 SoC camera port pinctrl nodes ARM: dts: Add FIMC nodes for Exynos4210 Trats board ... Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-08-21Merge tag 'sunxi-dt-for-3.12-2' of https://github.com/mripard/linux into next/dtKevin Hilman
Allwinner sunXi DT additions for 3.12, take 2 These patches add basic support for: - Allwinner A31 and A20 SoCs - The Olimex A20-Olinuxino board - The Olimex A10s-Olinuxino board * tag 'sunxi-dt-for-3.12-2' of https://github.com/mripard/linux: ARM: sun7i: Add Olimex A20-Olinuxino-Micro support ARM: sun7i: Add Allwinner A20 DTSI ARM: sun6i: Add WITS Colombus A31 evaluation kit support ARM: sunxi: Add Allwinner A31 DTSI
2013-08-21Merge tag 'sunxi-dt-for-3.12' of https://github.com/mripard/linux into next/dtKevin Hilman
Allwinner sunXi DT additions for 3.12 - Cleanups and few fixes to the DTSI - A few additions to the A10s olinuxino board * tag 'sunxi-dt-for-3.12' of https://github.com/mripard/linux: ARM: sunxi: dt: Add device tree for Mele A1000 ARM: sun5i: dt: Fix A13 SoC bus base address ARM: sun5i: a13: Remove useless simple-bus reg property ARM: sun5i: dt: Fix A10s SoC bus base address ARM: sun5i: a10s: Remove useless simple-bus reg property ARM: sun4i: dt: Fix A10 SoC bus base address ARM: sun4i: a10: Remove useless simple-bus reg property ARM: sunxi: make the leds' names conform to the current naming convention ARM: sun5i: dt: Add AT24 device on A10S-OLinuXino-Micro ARM: sun5i: dt: Enable I2C controllers on A10S-OLinuXino-Micro ARM: sun5i: dt: Add I2C controller nodes to the A10S dtsi ARM: sun5i: dt: Add I2C muxings for sun5i A10S Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-08-21ARM: at91/dt: sam9x5ek: add sound configurationRichard Genoud
The sam9x5ek board has 2 jacks: headphone wired on RHPOUT/LHPOUT of the wm8731 line in wired on LLINEIN/RLINEIN of the wm8731 Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-21ARM: at91/dt: sam9x5ek: enable SSCRichard Genoud
Enable the SSC needed for the WM8731 codec Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-21ARM: at91/dt: sam9x5ek: add WM8731 codecRichard Genoud
The WM8731 codec on sam9x5ek board is on i2c, address 1A Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-21ARM: at91/dt: sam9x5: add SSC DMA parametersRichard Genoud
Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-21ARM: at91/dt: add at91rm9200 PQFP package versionJean-Christophe PLAGNIOL-VILLARD
The PQFP version have only 3 gpio banks (A, B & C). Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [nicolas.ferre@atmel.com: correct typo in "status" property] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-21ARM: at91: at91rm9200: set default mmc0 pinctrl-namesJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-21ARM: at91: at91sam9n12: correct pin number of gpio-keyvoice
Correct pin number of gpio-key for at91sam9n12ek board. The pioB4 is connect to LED, the pioB3 use as gpio-key. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-21ARM: at91: at91sam9n12: add qt1070 supportvoice
Add qt1070 support on at91sam9n12ek board. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-21ARM: at91: at91sam9n12: add pinctrl of TWIvoice
Add pinctrl of TWI for at91sam9n12 SoC. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-21ARM: at91: Add PMU support for sama5d3Alexandre Belloni
ARM Performance Monitor Units are available on the sama5d3, add the support in the dtsi. Tested with perf and oprofile on the sama5d31ek. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-21ARM: at91: at91sam9260: add missing pinctrl-names on mmcJean-Christophe PLAGNIOL-VILLARD
pinctrl-names was missing causing mmc pinctrl to never be requested. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> [nicolas.ferre@atmel.com: added a commit message taken from Ludovic] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-20ARM: tegra: configure power off for DalmoreBill Huang
Add DT property to tell the regulator to register pm_power_off to make "shutdown" work. Signed-off-by: Bill Huang <bilhuang@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-08-20Merge tag 'tegra-for-3.12-dt' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/dt From: Stephen Warren: ARM: tegra: device tree changes for 3.12 This branch contains all *.dts (device tree) changes for Tegra. New features enabled are: * PMICs on Dalmore * CPU power-gating on Dalmore * HDMI output on Beaver * LP1 system suspend mode on almost all boards * PCIe support on numerous Tegra20/30 boards * USB support on Tegra30/114 boards * Audio capture on Beaver and Dalmore * Temperature sensor on Cardhu. ... along with a few DT cleanups. * tag 'tegra-for-3.12-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (25 commits) ARM: tegra: add Mic Jack to Dalmore device tree ARM: tegra: add Mic Jack to Beaver device tree ARM: tegra: add USB DT entries for Tegra114, Dalmore ARM: tegra: add USB DT entries for Tegra30 ARM: dts: tegra: Increase prefetchable PCI memory space ARM: tegra: Fix Beaver's PCIe lane configuration ARM: tegra: Enable PCIe controller on Beaver ARM: tegra: Enable PCIe controller on Cardhu ARM: tegra: Add Tegra30 PCIe support ARM: tegra: trimslice: Initialize PCIe from DT ARM: tegra: harmony: Initialize PCIe from DT ARM: tegra: tec: Add PCIe support ARM: tegra: tamonten: Add PCIe support ARM: tegra: Add Tegra20 PCIe support to DT ARM: tegra: enable LP1 suspend mode ARM: tegra: beaver: Enable HDMI output ARM: tegra: use TEGRA_GPIO() in a couple more places ARM: tegra: dalmore: fix the irq trigger type of Palmas MFD device ARM: tegra: define valid function names in DT document ARM: tegra: dalmore: add PM configurations for PMC ...
2013-08-20Merge tag 'ux500-devicetree-for-v3.12-1' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt From: Linus Walleij: Ux500 device tree enablement base for the v3.12 development cycle: - Various cleanups like remove non-existant hardware from the Snowball device tree, prefix all files with "ste-*" - External regulators - Documentation updates - Delete some minor dangling platform data - Pin control settings for U8540 through DT * tag 'ux500-devicetree-for-v3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (22 commits) ARM: ux500: fix devicetree builds ARM: ux500: Remove u9540.dts as it's been replaced ARM: ux500: Apply a ste-* prefix onto dbx5x0.dtsi ARM: ux500: Apply a ste-* prefix onto stuib.dtsi ARM: ux500: Apply a ste-* prefix onto hrefv60plus.dts ARM: ux500: Apply a ste-* prefix onto hrefprev60.dts Signed-off-by: Lee Jones <lee.jones@linaro.org> ARM: ux500: Apply a ste-* prefix onto href.dtsi ARM: ux500: Apply a ste-* prefix onto ccu9540.dts ARM: ux500: Apply a ste-* prefix onto ccu8540.dts ARM: ux500: Apply a ste-* prefix onto snowball.dts ARM: ux500: Remove Snowball DTS entry for ROHM BH1780GLI ambient light sensor ARM: ux500: Remove Snowball DTS entry for TPS61052 chip ARM: ux500: Remove Snowball DTS entry for National Semiconductor LP5521 LED chip ARM: ux500: Remove Toshiba TC35892 I/O Expander's DT entry from Snowball's DTS ARM: u8540: DT: Set pinctrl mapping to i2c0,1,2,4 & 5 ARM: u8540: Add Pinctrl Device Tree settings for uart0, uart2 ARM: ux500: Stop passing MMC's platform data for Device Tree boots Documentation: Update binding for Nomadik and DBx5x based platforms ARM: ux500: Supply external regulator names for Snowball's DT ARM: ux500: Provide a supply name for the AB8500 AUX regulators to use ...
2013-08-20ARM: DT: binding fixup to align with vendor-prefixes.txt (DT)Christian Daudt
[ this is a follow-up to this discussion: http://archive.arm.linux.org.uk/lurker/message/20130730.230827.a1ceb12a.en.html ] This patchset renames all uses of "bcm," name bindings to "brcm," as they were done prior to knowing that brcm had already been standardized as Broadcom vendor prefix (in Documentation/devicetree/bindings/vendor-prefixes.txt). This will not cause any churn on devices because none of these bindings have made it into production yet. Also rename the the following dt binding docs that had "bcm," in their name for consistency: - bcm,kona-sdhci.txt -> kona-sdhci.txt - bcm,kona-timer.txt -> kona-timer.txt Signed-off-by: Christian Daudt <csd@broadcom.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2013-08-20ARM: dts: add sdio blocks to bcm28155-ap boardChristian Daudt
Enable sdio for bcm28155 AP board Signed-off-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
2013-08-20ARM: dts: align sdio numbers to HW definitionChristian Daudt
Clean up the sdio numbering to be 1-base as defined in HW spec, instead of the current 0-base Signed-off-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Alex Elder <elder@linaro.org>
2013-08-20ARM: sun7i: Add Olimex A20-Olinuxino-Micro supportMaxime Ripard
The Olimex A20-Olinuxino is an open-hardware board based on the Allwinner A20 SoC, with most of the pins exported on headers, a 10/100M ethernet port, SATA, SD and uSD slots, etc. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-08-20ARM: sun7i: Add Allwinner A20 DTSIMaxime Ripard
The Allwinner A20 SoC is based on 2 Cortex A7, an ARM Mali GPU, and is built to be pin-compatible with the older Allwinner A10. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-08-19ARM: dts: Add USB host node for Exynos4Dongjin Kim
This patch adds EHCI and OHCI host device nodes for Exynos4. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: add audio clock controller for exynos5420Andrew Bresticker
This adds device-tree bindings for the audio subsystem clock controller on Exynos 5420. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57712 Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Correct the /include entry on exynos5420 dtsi filePadmavathi Venna
This patch corrects the /include to #include on exynos5420 Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Add MFC node for exynos 5420Arun Kumar K
The patch adds MFC nodes for exynos 5420. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Update 5250 MFC nodeArun Kumar K
The patch adds the MFC clock entry for the 5250 SoC. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Remove unsused MFC clock from exynos4Arun Kumar K
Removes the unused sclk_mfc from exynos4 dtsi file. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Hook up internal PHY on ArndaleMark Brown
While the Linux driver stack is capable of figuring this out for itself document the fact that we really do use the internal PHY even with the directly wired hub on the board to save anyone else having to work this out for themselves. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Enable USB hub on ArndaleMark Brown
The Arndale has a SMSC USB3503 connected in hardware only mode like a PHY, support it using the usb-nop-xceiv binding. Note that due to a regrettable decision to use a regulator to represent the reset signal this uses a fixed voltage regulator to do that, there is a plan to use the reset controller binding once that is merged so it does not seem worthwhile to fix the usb-nop-xceiv driver at this point. Signed-off-by: Mark Brown <broonie@linaro.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Add secure-firmware boot support for OrigenQaud boardTushar Behera
OrigenQuad board boots with secure firmware support. Enable support for reading smc commands. The binding has been updated as per the documentation provided in Documentation/devicetree/bindings/arm/samsung-boards.txt. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Add pin state information for DP HPD support to Exynos5420Vikas Sajjan
Add pin state information for DP HPD support that requires pin configuration support using pinctrl interface. Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Add DP controller DT node to exynos5420 SoCVikas Sajjan
Adds DP controller DT node to exynos5420 SoC Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Update DP controller DT Node for Exynos5 based SoCsVikas Sajjan
Moves the properties of DP controller to exynos5.dtsi which are common across exynos5 SoCs like Exynos5250 and Exynos5420. The PHY DP Node is based on Jingoo Han's <jg1.han@samsung.com> patch at https://patchwork.linuxtv.org/patch/19189/ Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Add FIMD DT node to exynos5420 DTS filesVikas Sajjan
Adds FIMD DT node to exynos5420 based SMDK. Also adds display-timimg information node. Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Add basic PM domains for EXYNOS5420Yadwinder Singh Brar
Add DT nodes for gsc, isp, mfc, disp, mau, g2d and msc PM domains. Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Update FIMD DT node for Exynos5 SoCsVikas Sajjan
Moves the properties of FIMD DT node which are common across Exynos5 based SoCs like Exynos5250 and Exynos5420 to exynos5.dtsi Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-19ARM: dts: Move display-timing information inside FIMD DT node for exynos5250Vikas Sajjan
As the display-timing information is parsed by FIMD driver, it makes sense to move the display-timing DT node inside FIMD DT node for exynos5250 Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-16ARM: sun6i: Add WITS Colombus A31 evaluation kit supportMaxime Ripard
This platform from WITS is the evaluation board for the Allwinner A31. It features a quad-Cortex A7, 2048MB of RAM, NAND, USB, MMC, several UART, HDMI, a 2048 x 1536 10" screen, powered by a PowerVR, etc. Of course, most of these peripherals aren't supported yet, but support for those will come eventually. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-08-16ARM: sunxi: Add Allwinner A31 DTSIMaxime Ripard
The Allwinner A31 SoC is a multimedia SoC powered by 4 Cortex-A7 and a PowerVR GPU. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-08-16ARM: dts: mxs: add pin config for LCD sync and clock pinsLothar Waßmann
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16ARM: dts: mxs: add pin config for SSP3 interfaceLothar Waßmann
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16ARM: dts: mxs: add another set of saif0_pins (without MCLK)Lothar Waßmann
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16ARM: dts: mxs: add labels to most nodes for easier referenceLothar Waßmann
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-09-30 16:31:43 +0000