summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2013-01-25ARM: shmobile: sh73a0: Add CPU sleep suspendBastian Hecht
Add the lighest possible sleep mode on Cortex-A9 cores: CPU sleep. It is entered by a simple dsb and wfi instruction via cpu_do_idle(). As just clocks are stopped there is no need to save or restore any state of the system. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25ARM: shmobile: add function declarations for sh7372 DT helper functionsGuennadi Liakhovetski
sh7372_add_early_devices_dt() and sh7372_add_standard_devices_dt() are defined as global functions in arch/arm/mach-shmobile/setup-sh7372.c, but their declarations are missing. Add them to common.h, where similar functions for this and other SoC types are already declared. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms@verge.net.au>
2013-01-25ARM: sh7372: fix cache clean / invalidate orderGuennadi Liakhovetski
According to the Cortex A8 TRM the L2 cache should be first cleaned and then disabled. Fix the swapped order on sh7372. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25ARM: sh7372: add clock lookup entries for DT-based devicesGuennadi Liakhovetski
When booting with DT, devices are named differently. To get their clocks additional entries have to be added to the lookup table. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms@verge.net.au>
2013-01-25ARM: mach-shmobile: sh73a0 external IRQ wake updateMagnus Damm
Use sh73a0_set_wake() for external IRQ signals on sh73a0. The sh73a0 IRQ hardware for external IRQ pins consists of the INTCA interrupt controller and the GIC together doing their best to limp along. These external IRQ pins are treated as a special case where interrupts need to be managed in both interrupt controllers in parallel. The ->irq_set_wake() callback for the external IRQ pins can be dealt with in the same way as INTCA-only without involving the GIC. So this patch updates the external IRQ pin code for sh73a0 to no longer involve the GIC. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25ARM: shmobile: sh73a0: fixup div4_clks bitmapKuninori Morimoto
div4_clks's bitmap of sh73a0 was wrong. This patch is based on v2.0 datasheet. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25ARM: shmobile: r8a7740: add TMU timer supportKuninori Morimoto
This patch enabled TMU0 timer on r8a7740. But TMU1 timer is not supported yet Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25ARM: shmobile: Remove duplicate inclusion of dma-mapping.h in setup-r8a7740.cSachin Kamat
linux/dma-mapping.h was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-24Merge remote-tracking branches 'arm-soc/irqchip/gic-vic-move' and ↵Simon Horman
'arm-soc/timer/cleanup' into soc Conflicts: arch/arm/mach-bcm/board_bcm.c arch/arm/mach-cns3xxx/cns3420vb.c arch/arm/mach-ep93xx/adssphere.c arch/arm/mach-ep93xx/edb93xx.c arch/arm/mach-ep93xx/gesbc9312.c arch/arm/mach-ep93xx/micro9.c arch/arm/mach-ep93xx/simone.c arch/arm/mach-ep93xx/snappercl15.c arch/arm/mach-ep93xx/ts72xx.c arch/arm/mach-ep93xx/vision_ep9307.c arch/arm/mach-highbank/highbank.c arch/arm/mach-imx/mach-imx6q.c arch/arm/mach-msm/board-dt-8960.c arch/arm/mach-netx/nxdb500.c arch/arm/mach-netx/nxdkn.c arch/arm/mach-netx/nxeb500hmi.c arch/arm/mach-nomadik/board-nhk8815.c arch/arm/mach-picoxcell/common.c arch/arm/mach-realview/realview_eb.c arch/arm/mach-realview/realview_pb1176.c arch/arm/mach-realview/realview_pb11mp.c arch/arm/mach-realview/realview_pba8.c arch/arm/mach-realview/realview_pbx.c arch/arm/mach-socfpga/socfpga.c arch/arm/mach-spear13xx/spear1310.c arch/arm/mach-spear13xx/spear1340.c arch/arm/mach-spear13xx/spear13xx.c arch/arm/mach-spear3xx/spear300.c arch/arm/mach-spear3xx/spear310.c arch/arm/mach-spear3xx/spear320.c arch/arm/mach-spear3xx/spear3xx.c arch/arm/mach-spear6xx/spear6xx.c arch/arm/mach-tegra/board-dt-tegra20.c arch/arm/mach-tegra/board-dt-tegra30.c arch/arm/mach-u300/core.c arch/arm/mach-ux500/board-mop500.c arch/arm/mach-ux500/cpu-db8500.c arch/arm/mach-versatile/versatile_ab.c arch/arm/mach-versatile/versatile_dt.c arch/arm/mach-versatile/versatile_pb.c arch/arm/mach-vexpress/v2m.c include/asm-generic/vmlinux.lds.h
2013-01-14ARM: at91: fix board-rm9200-dt after sys_timer conversionJoachim Eastwood
After "ARM: delete struct sys_timer" board-rm9200-dt fails compilation with the following error: CC arch/arm/mach-at91/board-rm9200-dt.o arch/arm/mach-at91/board-rm9200-dt.c:50:2: error: unknown field 'timer' specified in initializer arch/arm/mach-at91/board-rm9200-dt.c:50:13: error: 'at91rm9200_timer' undeclared here (not in a function) make[1]: *** [arch/arm/mach-at91/board-rm9200-dt.o] Error 1 make: *** [arch/arm/mach-at91] Error 2 This is a fall out from the timer conversion. Fix it by converting board-rm9200-dt to use new timer init function as well. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-12irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.hRob Herring
Now that we have VIC moved to drivers/irqchip and all VIC DT init for platforms using irqchip_init, move gic.h and update the remaining includes. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: linux-samsung-soc@vger.kernel.org
2013-01-12ARM: picoxcell: use common irqchip_init functionRob Herring
Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Jamie Iles <jamie@jamieiles.com>
2013-01-12ARM: spear: use common irqchip_init functionRob Herring
Convert spear DT irq initialization over to use common irqchip_init function. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com>
2013-01-12irqchip: Move ARM VIC to drivers/irqchipRob Herring
Now that we have drivers/irqchip, move VIC irqchip to drivers/irqchip. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-01-12ARM: samsung: remove unused tick.hRob Herring
Remove tick.h on s5p64x0 and s5pv210 as they are unused. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: linux-samsung-soc@vger.kernel.org
2013-01-12ARM: remove unneeded vic.h includesRob Herring
Numerous includes of asm/hardware/vic.h aren't needed, so remove them. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Hubert Feurstein <hubert.feurstein@contec.at> Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Acked-By: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-samsung-soc@vger.kernel.org Cc: patches@opensource.wolfsonmicro.com Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-01-12ARM: remove mach .handle_irq for VIC usersRob Herring
Now that the VIC initialization sets up the handle_arch_irq pointer, we can remove it for all machines and make it static. Move vic_handle_irq to avoid a forward declaration. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Hubert Feurstein <hubert.feurstein@contec.at> Cc: Alessandro Rubini <rubini@unipv.it> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-01-12ARM: VIC: set handle_arch_irq in VIC initializationRob Herring
Set handle_arch_irq to vic_handle_irq. Only the first VIC initialized can setup the handler. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Olof Johansson <olof@lixom.net>
2013-01-12ARM: VIC: shrink down vic.hRob Herring
Move all register defines except VIC_INT_ENABLE and VIC_INT_ENABLE_CLEAR which are used by Samsung. With multi irq handler, vic.h is not included in assembly any more, so we can remove the assembly ifdefs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Olof Johansson <olof@lixom.net>
2013-01-12irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.hRob Herring
Now that we have GIC moved to drivers/irqchip and all GIC DT init for platforms using irqchip_init, move gic.h and update the remaining includes. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Anton Vorontsov <avorontsov@mvista.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Samuel Ortiz <sameo@linux.intel.com>
2013-01-12ARM: use common irqchip_init for GIC initRob Herring
Convert all GIC DT initialization over to use common irqchip_init function. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2013-01-12irqchip: Move ARM GIC to drivers/irqchipRob Herring
Now that we have drivers/irqchip, move GIC irqchip to drivers/irqchip. This is necessary to share the GIC with arm and arm64. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-01-12ARM: remove mach .handle_irq for GIC usersRob Herring
Now that the GIC initialization sets up the handle_arch_irq pointer, we can remove it for all machines and make it static. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Anton Vorontsov <avorontsov@mvista.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Stephen Warren <swarren@nvidia.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-01-10ARM: GIC: set handle_arch_irq in GIC initializationRob Herring
Set handle_arch_irq to gic_handle_irq. Only the first GIC initialized can setup the handler. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Olof Johansson <olof@lixom.net>
2013-01-10ARM: GIC: remove direct use of gic_raise_softirqRob Herring
In preparation of moving gic code to drivers/irqchip, remove the direct platform dependencies on gic_raise_softirq. Move the setup of smp_cross_call into the gic code and use arch_send_wakeup_ipi_mask function to trigger wake-up IPIs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Stephen Warren <swarren@nvidia.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
2013-01-10ARM: GIC: remove assembly ifdefs from gic.hRob Herring
With multi irq handler and all GIC users converted to it, we don't need asm/hardware/gic.h to be included in assembly. Clean-up ifdefs and unnecessary includes. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Olof Johansson <olof@lixom.net>
2013-01-10ARM: mach-ux500: use SGI0 to wake up the other coreSrinidhi Kasagar
The commit 7d28e3eaa1a8e951251b942e7220f97114bd73b9 ("ARM: ux500: wake secondary cpu via resched") makes use of schedule IPI to wake up the secondary core which seems incorrect. Rather use SGI0. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Olof Johansson <olof@lixom.net>
2013-01-10arm: add set_handle_irq() to register the parent IRQ controller handler functionThomas Petazzoni
In order to allow irqchip drivers to register their IRQ handling function as the parent IRQ controller handler function, we provide a convenience function. This will avoid poking directly into the global handle_arch_irq variable. Suggested by Arnd Bergmann. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> [Rob Herring: remove warning. 1st one to initialize wins.] Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Olof Johansson <olof@lixom.net>
2013-01-09Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King. * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7616/1: cache-l2x0: aurora: Use writel_relaxed instead of writel ARM: 7615/1: cache-l2x0: aurora: Invalidate during clean operation with WT enable ARM: 7614/1: mm: fix wrong branch from Cortex-A9 to PJ4b ARM: 7612/1: imx: Do not select some errata that depends on !ARCH_MULTIPLATFORM ARM: 7611/1: VIC: fix bug in VIC irqdomain code ARM: 7610/1: versatile: bump IRQ numbers ARM: 7609/1: disable errata work-arounds which access secure registers ARM: 7608/1: l2x0: Only set .set_debug on PL310 r3p0 and earlier
2013-01-08Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC fixes from Olof Johansson: "People are back from the holiday breaks, and it shows. Here are a bunch of fixes for a number of platforms: - A couple of small fixes for Nomadik - A larger set of changes for kirkwood/mvebu - uart driver selection, dt clocks, gpio-poweroff fixups, a few __init annotation fixes and some error handling improvement in their xor dma driver. - i.MX had a couple of minor fixes (and a critical one for flexcan2 clock setup) - MXS has a small board fix and a framebuffer bugfix - A set of fixes for Samsung Exynos, fixing default bootargs and some Exynos5440 clock issues - A set of OMAP changes including PM fixes and a few sparse warning fixups All in all a bit more positive code delta than we'd ideally want to see here, mostly from the OMAP PM changes, but nothing overly crazy." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers ...
2013-01-08ARM: sunxi: fix struct sys_timer removalStephen Warren
Commit 6bb27d7 "ARM: delete struct sys_timer" removed struct sys_timer, but didn't update mach-sunxi/sunxi.c for this change, even though the sunxi timer implementation itself was updated. This caused a build break: arch/arm/mach-sunxi/sunxi.c:94:2: error: unknown field 'timer' specified in initializer arch/arm/mach-sunxi/sunxi.c:94:12: error: 'sunxi_timer' undeclared here (not in a function) Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-08Merge tag 'omap-for-v3.8-rc2/fixes-signed-v2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: The biggest change is a fix to deal with different power state on omap2 registers that causes issues trying to use common PM code. Also fix few incorrect registers, and an issue for omap1 USB, and few sparse fixes for issues that sneaked in with all the clean-up. * tag 'omap-for-v3.8-rc2/fixes-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array ARM: OMAP1: fix USB configuration use-after-release ARM: OMAP2/3: PRM: fix bogus OMAP2xxx powerstate return values ARM: OMAP3: clock data: Add missing enable/disable for EMU clock ARM: OMAP4: PRM: Correct wrong instance usage for reading reset sources ARM: OMAP4: PRM: fix RSTTIME and RSTST offsets ARM: OMAP4: PRM: Correct reset source map ARM: OMAP: SRAM: resolve sparse warnings ARM: OMAP AM33xx: hwmod data: resolve sparse warnings ARM: OMAP: 32k counter: resolve sparse warnings Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-08Merge branch 'v3.8-samsung-fixes-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim: Most of them are EXYNOS5440 fixes which are for changing uart console, cpu id (typo) and silent complaining gpio error in kernel boot. * 'v3.8-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: skip the clock initialization for exynos5440 ARM: EXYNOS: enable PINCTRL for EXYNOS5440 ARM: dts: use uart port1 for console on exynos4210-smdkv310 ARM: dts: use uart port0 for console on exynos5440-ssdk5440 ARM: SAMSUNG: fix the cpu id for EXYNOS5440 ARM: EXYNOS: Revise HDMI resource size
2013-01-08Merge tag 'mxs-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson
into fixes From Shawn Guo: I have to send one critical mxsfb fix through arm-soc, as FB maintainer is unresponsive for quite a while. People start complaining the missing of such an important fix. * tag 'mxs-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6: video: mxsfb: fix crash when unblanking the display ARM: dts: imx23-olinuxino: Fix IOMUX settings
2013-01-08Merge tag 'imx-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson
into fixes From Shawn Guo: It includes one critical fix - wrong flexcan2 clock will hang system when the port gets brought up. The other two are non-critical fixes, which are sent together here, since it's still early -rc stage. * tag 'imx-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mx5: Fix MX53 flexcan2 clock ARM: dts: imx31-bug: Fix manufacturer compatible string clk: imx: Remove 'clock-output-names' from the examples
2013-01-07Merge tag 'mvebu_fixes_for_v3.8' of ↵Olof Johansson
git://git.infradead.org/users/jcooper/linux into fixes From Jason Cooper: fixes for mvebu/kirkwood v3.8 - use correct uart driver for mvebu boards - add a missing DT clocks - gpio-poweroff level vs. edge triggering, use gpio_is_valid() - remove an inappropriate __init, modules need to access function. - various DT fixes - error handling in mv_xor * tag 'mvebu_fixes_for_v3.8' of git://git.infradead.org/users/jcooper/linux: pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers Power: gpio-poweroff: Fix documentation and gpio_is_valid ARM: Kirkwood: Fix missing clk for USB device. arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driver Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-07ARM: clps711x: Fix bad merge of clockevents setupOlof Johansson
I mismerged a previous branch from Alexander, and accidentally left in ARCH_USES_GETTIMEOFFSET. Remove it. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Alexander Shiyan <shc_work@mail.ru>
2013-01-07Merge tag 'nomadik-fixes-for-arm-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into fixes From Linus Walleij: Two fixes to the Nomadik: - Delete a dangling include - Bump IRQ numbers to offset at 32 * tag 'nomadik-fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: nomadik: bump the IRQ numbers again ARM: nomadik: delete dangling include
2013-01-07ARM: highbank: save and restore L2 cache and GIC on suspendRob Herring
This fixes suspend to RAM adding necessary save and restore of L2 and GIC. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-07ARM: highbank: add a power request clearRob Herring
When we fail to power down, we need to clear out the power request. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-07ARM: highbank: fix secondary boot and hotplugRob Herring
With commit 384a290 (ARM: gic: use a private mapping for CPU target interfaces), wake-up IPIs now go to all cores as the gic cpu interface numbering may not follow core numbering. This broke secondary boot on highbank since the boot address was already set for all secondary cores, this caused all cores to boot before the kernel was ready. Fix this by moving the setting of the jump address to highbank_boot_secondary instead of highbank_smp_prepare_cpus and highbank_cpu_die. Also, clear the address when we boot. This prevents cores from booting before they are actually triggered and is also necessary to get suspend/resume to work. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-07ARM: highbank: fix typos with hignbank in power request functionsRob Herring
s/hignbank/highbank/ Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-07ARM: dts: fix highbank cpu mpidr valuesRob Herring
With the addition of commit a0ae0240 (ARM: kernel: add device tree init map function), the cpu reg values must match the cpu mpidr register or we'll get warnings. For some reason, the CLUSTERID on highbank is 9, so the reg value needs to be 0x90n to quiet the warnings. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-07ARM: dts: add device_type prop to cpu nodes on Calxeda platformsRob Herring
While device_type is considered deprecated, it is still needed for tools like lshw to identify cpu nodes. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-08ARM: mx5: Fix MX53 flexcan2 clockMarek Vasut
The second FlexCAN port uses different clock than the first one, configure correct clock to prevent hanging of the system during bringing up of the port. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-07ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs arrayPantelis Antoniou
The IRQ array must be terminated by -1 and not by -1+OMAP_INTC_START This led to having a resource list of 100s of IRQs. Looks like this was caused by commit a2cfc509 (ARM: OMAP3+: hwmod: Add AM33XX HWMOD data) that probably had some search and replace updates done for the patch for sparse irq support. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Paul Walmsley <paul@pwsan.com> [tony@atomide.com: updated wit information about the breaking commit] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-07ARM: Dove: Add pinctrl clock to DTSebastian Hesselbarth
During merge of the mvebu patches a clock gate for pinctrl was lost. This patch just readds the clock gate. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-07Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "Various fixes across the tree. The modpost error due to virt_addr_valid() not being usable from modules required a number of preparatory cleanups so a clean fix was possible." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: 64-bit: Fix build if !CONFIG_MODULES MIPS: Wire up finit_module syscall. MIPS: Fix modpost error in modules attepting to use virt_addr_valid(). MIPS: page.h: Remove now unnecessary #ifndef __ASSEMBLY__ wrapper. MIPS: Switch remaining assembler PAGE_SIZE users to <asm/asm-offsets.h>. MIPS: Include PAGE_S{IZE,HIFT} in <asm/offset.h>. MIPS: Don't include <asm/page.h> unnecessarily. MIPS: Fix comment. Revert "MIPS: Optimise TLB handlers for MIPS32/64 R2 cores." MIPS: perf: Fix build failure in XLP perf support. MIPS: Alchemy: Make 32kHz and r4k timer coexist peacefully
2013-01-07Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
Pull microblaze update from Michal Simek: "This fixes noMMU kernel and I have also added defconfig updates which fix issue with one external dependency and enable all xilinx device drivers for 0-day testing system. Additionally wire up finit_module system call, and do highmem fixup and pci warnings reported by the 0-day testing system" * 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Update microblaze defconfigs microblaze: Fix pci compilation and sparse warnings microblaze: Add finit_module syscall microblaze: Kill __kmap_atomic() microblaze: Change section flags for noMMU microblaze: Microblaze wants sys_fork for noMMU too
2013-01-07ARM: 7616/1: cache-l2x0: aurora: Use writel_relaxed instead of writelGregory CLEMENT
The use of writel instead of writel_relaxed lead to deadlock in some situation (SMP on Armada 370 for instance). The use of writel_relaxed as it was done in the rest of this driver fixes this bug. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-30 05:25:02 +0000