summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2011-09-11mtd: pxa3xx_nand: enable multiple chip select supportLei Wen
Current pxa3xx_nand controller has two chip select which both be workable. This patch enable this feature. Update platform driver to support this feature. Another notice should be taken that: When you want to use this feature, you should not enable the keep configuration feature, for two chip select could be attached with different nand chip. The different page size and timing requirement make the keep configuration impossible. Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-09-11ts72xx: use MTDPART_OFS_RETAIN for mtd partitioningDmitry Eremin-Solenikov
Instead of specifying a callback for dynamic partitioning, use MTDPART_OFS_RETAIN for reserving a place near the end of flash for RedBoot. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-09-11mtd: ATMEL, AVR32: inline nand partition table accessDmitry Eremin-Solenikov
Currently atmel_nand driver used by AT91 and AVR32 calls a special callback which return nand partition table and number of partitions. However in all boards this callback returns just static data. So drop this callback and make atmel_nand use partition table provided statically via platform_data. Nicolas Ferre: I am in favor for a mainline inclusion through linux-mtd tree. Hans-Christian Egtvedt: I'm fine by sending the changes for AVR32 through linux-mtd Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-09-11mtd: nand: rename NAND_USE_FLASH_BBTBrian Norris
Recall the recently added prefix requirements: * "NAND_" for flags in nand.h, used in nand_chip.options * "NAND_BBT_" for flags in bbm.h, used in nand_chip.bbt_options or in nand_bbt_descr.options Thus, I am changing NAND_USE_FLASH_BBT to NAND_BBT_USE_FLASH. Again, this flag is found in bbm.h and so should NOT be used in the "nand_chip.options" field. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-09-11mtd: nand: consolidate redundant flash-based BBT flagsBrian Norris
This patch works with the following three flags from two headers (nand.h and bbm.h): (1) NAND_USE_FLASH_BBT (nand.h) (2) NAND_USE_FLASH_BBT_NO_OOB (nand.h) (3) NAND_BBT_NO_OOB (bbm.h) These flags are all related and interdependent, yet they were in different headers. Flag (2) is simply the combination of (1) and (3) and can be eliminated. This patch accomplishes the following: * eliminate NAND_USE_FLASH_BBT_NO_OOB (i.e., flag (2)) * move NAND_USE_FLASH_BBT (i.e., flag (1)) to bbm.h It's important to note that because (1) and (3) are now both found in bbm.h, they should NOT be used in the "nand_chip.options" field. I removed a small section from the mtdnand DocBook because it referes to NAND_USE_FLASH_BBT in nand.h, which has been moved to bbm.h. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-08-12Merge branch 'x86-vdso-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-tip * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-tip: x86-64: Rework vsyscall emulation and add vsyscall= parameter x86-64: Wire up getcpu syscall x86: Remove unnecessary compile flag tweaks for vsyscall code x86-64: Add vsyscall:emulate_vsyscall trace event x86-64: Add user_64bit_mode paravirt op x86-64, xen: Enable the vvar mapping x86-64: Work around gold bug 13023 x86-64: Move the "user" vsyscall segment out of the data segment. x86-64: Pad vDSO to a page boundary
2011-08-12Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (32 commits) ARM: mmp: Change the way we use timer 0 as clockevent timer. ARM: mmp: Switch to using timer 1 as clocksource timer. ARM: mmp: Also start timer 1 on boot. ARM: pxa168/gplugd: free correct GPIO ARM: pxa168/gplugd: get rid of mfp-gplugd.h ARM: pxa: fix logic error in PJ4 iWMMXt handling mach-sa1100: fix PCI build problem omap: timer: Set dmtimer used as clocksource in autoreload mode OMAP3: am3517crane: remove NULL board_mux from board file arm: mach-omap2: mux: use kstrdup() arch:arm:plat-omap:iovmm: remove unused variable 'va' Update Nook Color machine 3284 to common Encore name am3505/3517: Various platform defines for UART4 OMAP: hwmod: fix build break on non-OMAP4 multi-OMAP2 builds OMAP: Fix linking error in twl-common.c for OMAP2/3/4 only builds iMX: Fix build for iMX53 ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage OMAP2+: PM: SmartReflex: use put_sync_suspend for IRQ-safe disabling OMAP3: beagle: don't touch omap_device internals OMAP1: enable GENERIC_IRQ_CHIP ...
2011-08-12Merge branch 'fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into fixes
2011-08-12Merge branch 'fix' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into fixes
2011-08-12Merge branch 'imx-fixes-for-arnd' of ↵Arnd Bergmann
git://git.pengutronix.de/git/imx/linux-2.6 into fixes
2011-08-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Don't do hypervisor calls on non-sun4v in DS driver.
2011-08-11sparc: Don't do hypervisor calls on non-sun4v in DS driver.David S. Miller
Reported-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf symbols: Check '/tmp/perf-' symbol file ownership perf sched: Usage leftover from trace -> script rename perf sched: Do not delete session object prematurely perf tools: Check $HOME/.perfconfig ownership perf, x86: Add model 45 SandyBridge support perf tools: Add support to install perf python extension perf tools: do not look at ./config for configuration perf tools: Make clean leaves some files perf lock: Dropping unsupported ':r' modifier perf probe: Fix coredump introduced by probe module option jump label: Reduce the cycle count by changing the link order perf report: Use ui__warning in some more places perf python: Add PERF_RECORD_{LOST,READ,SAMPLE} routine tables perf evlist: Introduce 'disable' method trace events: Update version number reference to new 3.x scheme for EVENT_POWER_TRACING_DEPRECATED perf buildid-cache: Zero out buffer of filenames when adding/removing buildid
2011-08-11ARM: mmp: Change the way we use timer 0 as clockevent timer.Lennert Buytenhek
Instead of setting up a match interrupt for 'current_time + delta' on ->set_next_event(), program timer 0 to count down from 'delta - 1' and trigger an interrupt when it reaches zero. Signed-off-by: Lennert Buytenhek <buytenh@laptop.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11ARM: mmp: Switch to using timer 1 as clocksource timer.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@laptop.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11ARM: mmp: Also start timer 1 on boot.Lennert Buytenhek
Currently, arch-mmp/time.c uses timer 0 both as a clocksource timer and as a clockevent timer, the latter by setting up a comparator interrupt to match on 'current_time + delta'. This is problematic if delta is small enough, as that can lead to 'current_time + delta' already being in the past when comparator setup has finished, leading to the requested event not triggering. As there is also a silicon issue that requires stopping a timer's counter while writing to one of its match registers, we'll switch to using two separate timers -- timer 0 as clockevent timer, which we'll start and stop on every invocation of ->set_next_event(), and timer 1 as clocksource timer, which will be free-running. This first patch enables timer 1 on boot, so that we can use it as clocksource timer. Signed-off-by: Lennert Buytenhek <buytenh@laptop.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11ARM: pxa168/gplugd: free correct GPIOTanmay Upadhyay
Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11ARM: pxa168/gplugd: get rid of mfp-gplugd.hTanmay Upadhyay
Move definitions from mfp-gplugd.h to mfp-pxa168.h as they aren't gplugD specific. Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11ARM: pxa: fix logic error in PJ4 iWMMXt handlingLennert Buytenhek
This got added in: commit ef6c84454f8567d4968c210d7d194fb711ed3739 Author: Haojian Zhuang <haojian.zhuang@marvell.com> Date: Wed Nov 24 11:54:25 2010 +0800 ARM: pxa: add iwmmx support for PJ4 which does: - mrc p15, 0, r2, c15, c1, 0 - orr r2, r2, #0x3 @ enable access to CP0 and CP1 - mcr p15, 0, r2, c15, c1, 0 + @ enable access to CP0 and CP1 + XSC(mrc p15, 0, r2, c15, c1, 0) + XSC(orr r2, r2, #0x3) + XSC(mcr p15, 0, r2, c15, c1, 0) but then later does: - mrc p15, 0, r4, c15, c1, 0 - orr r4, r4, #0x3 @ enable access to CP0 and CP1 - mcr p15, 0, r4, c15, c1, 0 + @ enable access to CP0 and CP1 + XSC(mrc p15, 0, r4, c15, c1, 0) + XSC(orr r4, r4, #0xf) + XSC(mcr p15, 0, r4, c15, c1, 0) Signed-off-by: Lennert Buytenhek <buytenh@laptop.org> Acked-by Haojian <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-10Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: drop experimental status for ARM_PATCH_PHYS_VIRT ARM: 7008/1: alignment: Make SIGBUS sent to userspace POSIXly correct ARM: 7007/1: alignment: Prevent ignoring of faults with ARMv6 unaligned access model ARM: 7010/1: mm: fix invalid loop for poison_init_mem ARM: 7005/1: freshen up mm/proc-arm946.S dmaengine: PL08x: Fix trivial build error ARM: Fix build error for SMP=n builds
2011-08-10x86-64: Rework vsyscall emulation and add vsyscall= parameterAndy Lutomirski
There are three choices: vsyscall=native: Vsyscalls are native code that issues the corresponding syscalls. vsyscall=emulate (default): Vsyscalls are emulated by instruction fault traps, tested in the bad_area path. The actual contents of the vsyscall page is the same as the vsyscall=native case except that it's marked NX. This way programs that make assumptions about what the code in the page does will not be confused when they read that code. vsyscall=none: Trying to execute a vsyscall will segfault. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/8449fb3abf89851fd6b2260972666a6f82542284.1312988155.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-10x86-64: Wire up getcpu syscallAndy Lutomirski
getcpu is available as a vdso entry and an emulated vsyscall. Programs that for some reason don't want to use the vdso should still be able to call getcpu without relying on the slow emulated vsyscall. It costs almost nothing to expose it as a real syscall. We also need this for the following patch in vsyscall=native mode. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/6b19f55bdb06a0c32c2fa6dba9b6f222e1fde999.1312988155.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-10x86: Remove unnecessary compile flag tweaks for vsyscall codeAndy Lutomirski
As of commit 98d0ac38ca7b1b7a552c9a2359174ff84decb600 Author: Andy Lutomirski <luto@mit.edu> Date: Thu Jul 14 06:47:22 2011 -0400 x86-64: Move vread_tsc and vread_hpet into the vDSO user code no longer directly calls into code in arch/x86/kernel/, so we don't need compile flag hacks to make it safe. All vdso code is in the vdso directory now. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/835cd05a4c7740544d09723d6ba48f4406f9826c.1312988155.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-10Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Really fix build without CONFIG_PCI powerpc: Fix build without CONFIG_PCI powerpc/4xx: Fix build of PCI code on 405 powerpc/pseries: Simplify vpa deregistration functions powerpc/pseries: Cleanup VPA registration and deregistration errors powerpc/pseries: Fix kexec on recent firmware versions MAINTAINERS: change maintainership of mpc5xxx powerpc: Make KVM_GUEST default to n powerpc/kvm: Fix build errors with older toolchains powerpc: Lack of ibm,io-events not that important! powerpc: Move kdump default base address to half RMO size on 64bit powerpc/perf: Disable pagefaults during callchain stack read ppc: Remove duplicate definition of PV_POWER7 powerpc: pseries: Fix kexec on machines with more than 4TB of RAM powerpc: Jump label misalignment causes oops at boot powerpc: Clean up some panic messages in prom_init powerpc: Fix device tree claim code powerpc: Return the_cpu_ spec from identify_cpu powerpc: mtspr/mtmsr should take an unsigned long
2011-08-10mach-sa1100: fix PCI build problemLinus Walleij
The PCI nanoengine driver in the SA1100 machine probably has not been building for some time. It probably dragged hardware.h in implicitly and now it doesn't anymore. After this an SA1100 build selecting all system variants will build successfully. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-08-11powerpc: Really fix build without CONFIG_PCIBenjamin Herrenschmidt
Brown paper bag day, previous commit wouldn't work very well with modules enabled. Move the exports into the ifdef. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-10omap: timer: Set dmtimer used as clocksource in autoreload modeHemant Pedanekar
If CONFIG_OMAP_32K_TIMER is not selected and dmtimer is used as clocksource, the timer stops counting once overflow occurs as it was not set in autoreload mode. This results into timekeeping failure: for example, 'sleep 1' at the shell after the timer counter overflow would hang. This patch sets up autoreload when starting the clocksource timer which fixes the above issue. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10OMAP3: am3517crane: remove NULL board_mux from board fileJohan Hovold
Since 7203f8a48bb63015ebe58a6f2a38aec1cb208b9d (arm: mach-omap2: remove NULL board_mux from board files) NULL board_mux is defined in mux.h. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10arm: mach-omap2: mux: use kstrdup()Thomas Meyer
Use kstrdup rather than duplicating its implementation The semantic patch that makes this output is available in scripts/coccinelle/api/kstrdup.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10arch:arm:plat-omap:iovmm: remove unused variable 'va'Maxin John
The pointer "va" returned from "phys_to_virt(pa)" is never used in "sgtable_fill_kmalloc()".So,it is safe to remove this set-but-unused variable. Signed-off-by: Maxin B. John <maxin.john@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10Update Nook Color machine 3284 to common Encore nameOleg Drokin
Machine database already updated: http://www.arm.linux.org.uk/developer/machines/list.php?id=3284 Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10am3505/3517: Various platform defines for UART4Raphaël Assénat
Add missing definitions for the AM3505/3517 UART4 such as DMAs, INTs and base address. Signed-of-by: Raphael Assenat <raph@8d.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10Merge branch 'for_3.1/pm-fixes' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into fixes
2011-08-10ARM: drop experimental status for ARM_PATCH_PHYS_VIRTRussell King
This has now been well tested, and several platforms are now selecting this directly. It's time to drop its experimental status. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-10OMAP: hwmod: fix build break on non-OMAP4 multi-OMAP2 buildsPaul Walmsley
Builds for multi-OMAP2 (e.g., OMAP2420 with OMAP2430) with CONFIG_ARCH_OMAP4=n fail with the following errors: arch/arm/mach-omap2/built-in.o: In function `_enable_module': arch/arm/mach-omap2/omap_hwmod.c:701: undefined reference to `omap4_cminst_module_enable' arch/arm/mach-omap2/built-in.o: In function `_disable_module': arch/arm/mach-omap2/omap_hwmod.c:726: undefined reference to `omap4_cminst_module_disable' arch/arm/mach-omap2/built-in.o: In function `_wait_target_disable': arch/arm/mach-omap2/omap_hwmod.c:1179: undefined reference to `omap4_cminst_wait_module_idle' This is probably due to the preprocessor directives in arch/arm/plat-omap/include/plat/cpu.h that convert some cpu_is_omap*() expressions from preprocessor directives into something that is only resolvable during runtime, if multiple OMAP2 build targets are selected. Thanks to Tony Lindgren <tony@atomide.com> for reporting. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10OMAP: Fix linking error in twl-common.c for OMAP2/3/4 only buildsPeter Ujfalusi
Commit b22f954 (OMAP4: Move common twl6030 configuration to twl-common) caused compile failures for code for OMAP arch which is not selected by the config. Fixes issues like: With CONFIG_ARCH_OMAP3=y and CONFIG_ARCH_OMAP4=n, I'm getting this: arch/arm/mach-omap2/built-in.o:(.data+0xf99c): undefined reference to `omap4430_phy_init' arch/arm/mach-omap2/built-in.o:(.data+0xf9a0): undefined reference to `omap4430_phy_exit' arch/arm/mach-omap2/built-in.o:(.data+0xf9a4): undefined reference to `omap4430_phy_power' arch/arm/mach-omap2/built-in.o:(.data+0xf9a8): undefined reference to `omap4430_phy_set_clk' arch/arm/mach-omap2/built-in.o:(.data+0xf9ac): undefined reference to `omap4430_phy_suspend' Fix the problem by moving the code to ifdef sections for omap3 and omap4. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-09perf, x86: Add model 45 SandyBridge supportYouquan Song
Add support to Romely-EP SandyBridge. Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Anhua Xu <anhua.xu@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1312264895-2010-1-git-send-email-youquan.song@intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-09ARM: 7008/1: alignment: Make SIGBUS sent to userspace POSIXly correctDave Martin
With the UM_SIGNAL alignment fault mode, no siginfo structure is passed to userspace. POSIX specifies how siginfo_t should be populated for alignment faults, so this patch does just that: * si_signo = SIGBUS * si_code = BUS_ADRALN * si_addr = misaligned data address at which access was attempted Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-09ARM: 7007/1: alignment: Prevent ignoring of faults with ARMv6 unaligned ↵Dave Martin
access model Currently, it's possible to set the kernel to ignore alignment faults when changing the alignment fault handling mode at runtime via /proc/sys/alignment, even though this is undesirable on ARMv6 and above, where it can result in infinite spins where an un-fixed- up instruction repeatedly faults. In addition, the kernel clobbers any alignment mode specified on the command-line if running on ARMv6 or above. This patch factors out the necessary safety check into a couple of new helper functions, and checks and modifies the fault handling mode as appropriate on boot and on writes to /proc/cpu/alignment. Prior to ARMv6, the behaviour is unchanged. For ARMv6 and above, the behaviour changes as follows: * Attempting to ignore faults on ARMv6 results in the mode being forced to UM_FIXUP instead. A warning is printed if this happened as a result of a write to /proc/cpu/alignment. The user's UM_WARN bit (if present) is still honoured. * An alignment= argument from the kernel command-line is now honoured, except that the kernel will modify the specified mode as described above. This is allows modes such as UM_SIGNAL and UM_WARN to be active immediately from boot, which is useful for debugging purposes. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-09ARM: 7010/1: mm: fix invalid loop for poison_init_memJamie Iles
poison_init_mem() used a loop of: while ((count = count - 4)) which has 2 problems - an off by one error so that we do one less word than we should, and the other is that if count == 0 then we loop forever and poison too much. On a platform with HAVE_TCM=y but nothing in the TCM's, this caused corruption and the platform failed to boot. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-09ARM: 7005/1: freshen up mm/proc-arm946.SBrian S. Julin
The file mm/proc-arm946.S contains a typo and is missing a structure member in __arm946_proc_info. The former prevents compilation and the latter causes problems during boot. It is likely this file was manually copied from a similar file and not tested, then later updates to the *_proc_info structures missed this file. This patch will apply (with offset) with or without the recent macro unification work that has been done in this directory. This was verified against linux-next/stable last week. See arm-linux-kernel thread: http://lists.arm.linux.org.uk/lurker/message/20110718.103237.0106d468.en.html Signed-off-by: Brian S. Julin <bri@abrij.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-08iMX: Fix build for iMX53Arnaud Patard (Rtp)
Commit fad107086d5a869c1c07e5bb35b7b57a10ecf578 fixed the wrong test for MX51 as the MX51 addresses are wrong for MX50 and MX53 but now it's MX51 only, UART_PADDR is not defined anymore when building for MX50/MX53. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Tested-by: Steev Klimaszewski <steev@genesi-usa.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-08ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usageBen Dooks
irq_to_gpio() is being called on a GPIO so change to using gpio_to_irq() instead. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-08Merge commit 'v3.1-rc1' into imx-fixesSascha Hauer
2011-08-08ASoC: Rename WM8915 to WM8996Mark Brown
For marketing reasons the part will be called WM8996. In order to avoid user confusion rename the driver to reflect this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Fix build with DEBUG_PAGEALLOC enabled.
2011-08-07arm: remove stale export of 'sha_transform'Linus Torvalds
The generic library code already exports the generic function, this was left-over from the ARM-specific version that just got removed. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-07arm: remove "optimized" SHA1 routinesLinus Torvalds
Since commit 1eb19a12bd22 ("lib/sha1: use the git implementation of SHA-1"), the ARM SHA1 routines no longer work. The reason? They depended on the larger 320-byte workspace, and now the sha1 workspace is just 16 words (64 bytes). So the assembly version would overwrite the stack randomly. The optimized asm version is also probably slower than the new improved C version, so there's no reason to keep it around. At least that was the case in git, where what appears to be the same assembly language version was removed two years ago because the optimized C BLK_SHA1 code was faster. Reported-and-tested-by: Joachim Eastwood <manabian@gmail.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-06Merge branch 'stable/bug.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/trace: Fix compile error when CONFIG_XEN_PRIVILEGED_GUEST is not set xen: Fix misleading WARN message at xen_release_chunk xen: Fix printk() format in xen/setup.c xen/tracing: it looks like we wanted CONFIG_FTRACE xen/self-balloon: Add dependency on tmem. xen/balloon: Fix compile errors - missing header files. xen/grant: Fix compile warning. xen/pciback: remove duplicated #include
2011-08-06sparc: Fix build with DEBUG_PAGEALLOC enabled.David S. Miller
arch/sparc/mm/init_64.c:1622:22: error: unused variable '__swapper_4m_tsb_phys_patch_end' [-Werror=unused-variable] arch/sparc/mm/init_64.c:1621:22: error: unused variable '__swapper_4m_tsb_phys_patch' [-Werror=unused-variable] Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-16 20:21:04 +0000