summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2011-12-07MIPS: Alchemy: Au1300 SoC supportManuel Lauss
Add basic support for the Au1300 variant(s): - New GPIO/Interrupt controller - DBDMA ids - USB setup - MMC support - enable various PSC drivers - detection code. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2866/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: devboards: remove unneeded BCSR IRQ reg accManuel Lauss
Initially I had to write to both the MASK and ENABLE registers, otherwise the CPLD would generate tons of spurious interrupts. With the change to the demux handler to disable the muxed line, it is now sufficient to disable the interrupt by writing either the enable or mask register. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2865/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: Drop MIRAGE/BOSPORUS board supportManuel Lauss
No test hardware and no (apparent) users. These boards seem very similar to the DB1500, so if required support can be brought back again (I have datasheets) but then with dedicated board code, not tacked on to DB1000 support. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2864/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: remove PB1000 supportManuel Lauss
Noone seems to have test hardware or care anymore. Drop PB1000 support and along with it the old Alchemy PCMCIA socket driver. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Cc: linux-pcmcia@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/2881/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-01Merge branch 'fixes' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7182/1: ARM cpu topology: fix warning ARM: 7181/1: Restrict kprobes probing SWP instructions to ARMv5 and below ARM: 7180/1: Change kprobes testcase with unpredictable STRD instruction ARM: 7177/1: GIC: avoid skipping non-existent PPIs in irq_start calculation ARM: 7176/1: cpu_pm: register GIC PM notifier only once ARM: 7175/1: add subname parameter to mfp_set_groupg callers ARM: 7174/1: Fix build error in kprobes test code on Thumb2 kernels ARM: 7172/1: dma: Drop GFP_COMP for DMA memory allocations ARM: 7171/1: unwind: add unwind directives to bitops assembly macros ARM: 7170/2: fix compilation breakage in entry-armv.S ARM: 7168/1: use cache type functions for arch_get_unmapped_area ARM: perf: check that we have a platform device when reserving PMU ARM: 7166/1: Use PMD_SHIFT instead of PGDIR_SHIFT in dma-consistent.c ARM: 7165/2: PL330: Fix typo in _prepare_ccr() ARM: 7163/2: PL330: Only register usable channels ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds ARM: 7161/1: errata: no automatic store buffer drain ARM: perf: initialise used_mask for fake PMU during validation ARM: PMU: remove pmu_init declaration ARM: PMU: re-export release_pmu symbol to modules
2011-11-30Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) ARM: ux500: update defconfig ARM: u300: update defconfig ARM: at91: enable additional boards in existing soc defconfig files ARM: at91: refresh soc defconfig files for 3.2 ARM: at91: rename defconfig files appropriately ARM: OMAP2+: Fix Compilation error when omap_l3_noc built as module ARM: OMAP2+: Remove empty io.h ARM: OMAP2: select ARM_AMBA if OMAP3_EMU is defined ARM: OMAP: smartreflex: fix IRQ handling bug ARM: OMAP: PM: only register TWL with voltage layer when device is present ARM: OMAP: hwmod: Fix the addr space, irq, dma count APIs arm: mx28: fix bit operation in clock setting ARM: imx: export imx_ioremap ARM: imx/mm-imx3: conditionally compile i.MX31 and i.MX35 code ARM: mx5: Fix checkpatch warnings in cpu-imx5.c MAINTAINERS: Add missing directory ARM: imx: drop 'ARCH_MX31' and 'ARCH_MX35' ARM: imx6q: move clock register map to machine_desc.map_io ARM: pxa168/gplugd: add the correct SSP device ARM: Update mach-types to fix mxs build breakage ...
2011-11-30ARM: 7182/1: ARM cpu topology: fix warningVincent Guittot
kernel/sched.c:7354:2: warning: initialization from incompatible pointer type Align cpu_coregroup_mask prototype interface with sched_domain_mask_f typedef use int cpu instead of unsigned int cpu Cc: <stable@vger.kernel.org> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-30ARM: 7181/1: Restrict kprobes probing SWP instructions to ARMv5 and belowJon Medhurst (Tixy)
The SWP instruction is deprecated on ARMv6 and with ARMv7 it will be UNDEFINED when CONFIG_SWP_EMULATE is selected. In this case, probing a SWP instruction will cause an oops when the kprobes emulation code executes an undefined instruction. As the SWP instruction should be rare or non-existent in kernels for ARMv6 and later, we can simply avoid these problems by not allowing probing of these. Reported-by: Leif Lindholm <leif.lindholm@arm.com> Tested-by: Leif Lindholm <leif.lindholm@arm.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Jon Medhurst <tixy@yxit.co.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-30ARM: 7180/1: Change kprobes testcase with unpredictable STRD instructionJon Medhurst (Tixy)
There is a kprobes testcase for the instruction "strd r2, [r3], r4". This has unpredictable behaviour as it uses r3 for register writeback addressing and also stores it to memory. On a cortex A9, this testcase would fail because the instruction writes the updated value of r3 to memory, whereas the kprobes emulation code writes the original value. Fix this by changing testcase to used r5 instead of r3. Reported-by: Leif Lindholm <leif.lindholm@arm.com> Tested-by: Leif Lindholm <leif.lindholm@arm.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Jon Medhurst <tixy@yxit.co.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-29Merge branch 'defconfigs-for-arnd' of ↵Arnd Bergmann
git://git.linaro.org/people/triad/linux-stericsson into fixes
2011-11-29ARM: ux500: update defconfigLinus Walleij
This updates the Ux500 defconfig with the new drivers for HWSEM and AB5500 core that were merged in the 3.2 cycle. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-11-29ARM: u300: update defconfigLinus Walleij
This updates the U300 defconfig to support some new drivers like FSMC, sets it to use the MMC clock gating scheme, and removes some stale config options. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-11-26ARM: 7177/1: GIC: avoid skipping non-existent PPIs in irq_start calculationWill Deacon
Commit 4294f8baa ("ARM: gic: add irq_domain support") defines irq_start as irq_start = (irq_start & ~31) + 16; On a platform with a GIC and a CPU without PPIs, this results in irq_start being off by 16. This patch fixes gic_init so that we only carve out a PPI space when PPIs exist for the GIC being initialised. Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-26ARM: 7176/1: cpu_pm: register GIC PM notifier only onceMarc Zyngier
When multiple GICs exist on a platform (RealView PB1176/11MP), we must make sure the PM notifier block is only registered once, otherwise we end up corrupting the PM notifier list. The fix is to only register the notifier when initializing the first GIC, as the power management functions seem to iterate over all the registered GICs. Tested on PB11MP and PB1176. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Cc: Colin Cross <ccross@android.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-26ARM: 7174/1: Fix build error in kprobes test code on Thumb2 kernelsJon Medhurst
When compiling kprobes-test-thumb.c an error like below may occur: /tmp/ccKcuJcG.s:19179: Error: offset out of range This is caused by the compiler underestimating the size of the inline assembler instructions containing ".space 0x1000" and failing to spill the literal pool in time to prevent the generation of PC relative load instruction with invalid offsets. The fix implemented by this patch is to replace a single large .space directive by a number of 4 byte .space's. This requires splitting the macros which generate test cases for branch instructions into two forms: one with, and one without support for inserting extra code between branch and target. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Jon Medhurst <jon.medhurst@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-26ARM: 7172/1: dma: Drop GFP_COMP for DMA memory allocationsSumit Bhattacharya
dma_alloc_coherent wants to split pages after allocation in order to reduce the memory footprint. This does not work well with GFP_COMP pages, so drop this flag before allocation. This patch is ported from arch/avr32 (commit 3611553ef985ef7c5863c8a94641738addd04cff). [swarren: s/HUGETLB_PAGE/HUGETLBFS/ in comment, minor comment cleanup] Signed-off-by: Sumit Bhattacharya <sumitb@nvidia.com> Tested-by: Varun Colbert <vcolbert@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-26ARM: 7171/1: unwind: add unwind directives to bitops assembly macrosWill Deacon
The bitops functions (e.g. _test_and_set_bit) on ARM do not have unwind annotations and therefore the kernel cannot backtrace out of them on a fatal error (for example, NULL pointer dereference). This patch annotates the bitops assembly macros with UNWIND annotations so that we can produce a meaningful backtrace on error. Callers of the macros are modified to pass their function name as a macro parameter, enforcing that the macros are used as standalone function implementations. Acked-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-26ARM: 7170/2: fix compilation breakage in entry-armv.SGuennadi Liakhovetski
Fix compilation failure, when Thumb support is not enabled: arch/arm/kernel/entry-armv.S: Assembler messages: arch/arm/kernel/entry-armv.S:501: Error: backward ref to unknown label "2:" arch/arm/kernel/entry-armv.S:502: Error: backward ref to unknown label "3:" make[2]: *** [arch/arm/kernel/entry-armv.o] Error 1 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-26ARM: 7168/1: use cache type functions for arch_get_unmapped_areaRob Herring
There are already cache type decoding functions, so use those instead of custom decode code which only works for ARMv6. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-25powerpc/44x: Add mtd ndfc to the ppx44x defconfigTony Breeds
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Acked-by: Josh Boyer <jwboyer@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-25powerpc: Fix compiliation with hugetlbfs enabledKumar Gala
arch/powerpc/mm/hugetlbpage.c: In function 'reserve_hugetlb_gpages': arch/powerpc/mm/hugetlbpage.c:312:2: error: implicit declaration of function 'parse_args' Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-24Merge branch 'fixes-dss' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
2011-11-24Merge branch 'fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
2011-11-24Merge branch 'at91/defconfig' into fixesArnd Bergmann
2011-11-24ARM: at91: enable additional boards in existing soc defconfig filesJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-11-24ARM: at91: refresh soc defconfig files for 3.2Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-11-24ARM: at91: rename defconfig files appropriatelyJean-Christophe PLAGNIOL-VILLARD
rename all Atmel reference board as soc defconfig Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-11-24arch/powerpc/sysdev/ehv_pic.c: add missing kfreeJulia Lawall
At this point, ehv_pic has been allocated but not stored anywhere, so it should be freed before leaving the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24powerpc/fsl-lbc: Fix for fsl_upmAlexandre Rusev
If Freescale LBC driver fails to initialise itself from device tree, then internal structure is freed only but not NULL-fied. As result functions fsl_lbc_find() after checking the structure is not NULL are trying to access device registers. Signed-off-by: Alexandre Rusev <arusev@dev.rtsoft.ru> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24powerpc/qe: Fixup QE_General4 errataJoakim Tjernlund
QE_General4 should only round up the divisor iff divisor is > 3. Rounding up lower divisors makes the error too big, causing USB on MPC832x to fail. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-23powerpc/85xx: Fix compile error on p3060_qds.cKumar Gala
arch/powerpc/platforms/85xx/p3060_qds.c: In function '__machine_initcall_p3060_qds_declare_of_platform_devices': arch/powerpc/platforms/85xx/p3060_qds.c:73:1: error: implicit declaration of function 'declare_of_platform_devices' declare_of_platform_devices should have been corenet_ds_publish_devices. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-23powerpc/p3060qds: Fix select of 'MPC8xxx_GPIO'Paul Bolle
The driver for the Freescale P3060 QDS got added by commit 96cc017c5b ("[...] Add support for P3060QDS board"). Its Kconfig entry selects MPC8xxx_GPIO. But at the time that driver got added MPC8xxx_GPIO was already renamed to GPIO_MPC8XXX, by commit c68308dd50c ("gpio: move mpc8xxx/512x gpio driver to drivers/gpio"). So make this driver select GPIO_MPC8XXX. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-23powerpc/p1023: set IRQ[4:6,11] to active-high level sensitive for PCIeRoy Zang
P1023 external IRQ[4:6, 11] are not pin out, but the interrupts are utilized by the PCIe controllers. As they are not exposed as pins we need to set them as active-high (internal to the SoC these interrupts are pulled down). IRQs[0:3,7:10] are pulled up on the board so we have them set as active-low. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-23Merge branch 'hwmod_dss_fixes_3.2rc' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren
fixes-dss
2011-11-23Merge branch 'fixes-v3.2-rc2' into fixesTony Lindgren
2011-11-23ARM: OMAP2+: Fix Compilation error when omap_l3_noc built as moduleGovindraj.R
Fix below compilation failure on mainline kernel 3.2-rc1 when omap_l3_noc.c is built as module. arch/arm/mach-omap2/omap_l3_noc.c:240: error: expected ',' or ';' before 'MODULE_DEVICE_TABLE' Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23ARM: OMAP2+: Remove empty io.hThomas Weber
The file arch/arm/mach-omap2/io.h is empty, so we can remove it. Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23ARM: OMAP2: select ARM_AMBA if OMAP3_EMU is definedMing Lei
This patch selects ARM_AMBA if OMAP3_EMU is defined because OC_ETM depends on ARM_AMBA, so fix the link failure[1]. [1], arch/arm/kernel/built-in.o: In function `etm_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:609: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_remove': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:409: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etm_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:640: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:646: undefined reference to `amba_driver_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:648: undefined reference to `amba_driver_unregister' arch/arm/kernel/built-in.o: In function `etm_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:545: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:595: undefined reference to `amba_release_regions' arch/arm/kernel/built-in.o: In function `etb_probe': /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:347: undefined reference to `amba_request_regions' /home/tom/git/omap/linux-2.6-omap/arch/arm/kernel/etm.c:392: undefined reference to `amba_release_regions' arch/arm/mach-omap2/built-in.o: In function `emu_init': /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:62: undefined reference to `amba_device_register' /home/tom/git/omap/linux-2.6-omap/arch/arm/mach-omap2/emu.c:63: undefined reference to `amba_device_register' make: *** [.tmp_vmlinux1] Error 1 making modules Signed-off-by: Ming Lei <tom.leiming@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23ARM: OMAP: smartreflex: fix IRQ handling bugFelipe Balbi
Fix a bug which has been on this driver since it was added by the original commit 984aa6db which would never clear IRQSTATUS bits. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23ARM: OMAP: PM: only register TWL with voltage layer when device is presentKevin Hilman
Current code registers voltage layer details for TWL PMIC even when a TWL has not been registered. Fix this to only register the TWL with voltage layer when the TWL PMIC is initialized by board-level code. Signed-off-by: Kevin Hilman <khilman@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23ARM: OMAP: hwmod: Fix the addr space, irq, dma count APIssricharan
The address spaces, irqs and dma reqs count APIs return the number of corresponding entries in a hwmod including a additional null value or a -1 terminator in the structure introduced recently. More information here: - 212738a4: omap_hwmod: use a terminator record with omap_hwmod_mpu_irqs arrays - 78183f3f: omap_hwmod: use a null structure record to terminate omap_hwmod_addr_space arrays - bc614958: omap_hwmod: use a terminator record with omap_hwmod_dma_info arrays The issue with irqs and dma info was originally reported by Benoit Cousson. The devices which have multiple hwmods and use device_build_ss are broken with this, as their resources are populated with a extra null value, subsequently the probe fails. So fix the API not to include the array terminator in the count. Reported-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimar@ti.com> Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-23Merge branch 'fix' of git://github.com/ycmiao/pxa-linux into fixesArnd Bergmann
2011-11-23Merge branch 'imx-for-arnd' of git://git.pengutronix.de/git/imx/linux-2.6 ↵Arnd Bergmann
into fixes
2011-11-23Merge branch 'samsung-fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
2011-11-23Merge branch 'for-arnd' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into fixes
2011-11-23Merge branch 'imx6q/fixes' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann
into fixes
2011-11-23arm: mx28: fix bit operation in clock settingWolfram Sang
reg | (1 << clk->enable_shift) always evaluates to true. Switch it to & which makes much more sense. Same fix as 13be9f00 (ARM i.MX28: fix bit operation) at a different location. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: stable@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-11-22Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into fixes
2011-11-22ARM: perf: check that we have a platform device when reserving PMUWill Deacon
Attempting to use a hardware counter on a platform with a supported PMU but where the platform_device (defining the interrupts) has not been registered results in a NULL pointer dereference. This patch fixes the problem by checking that we actually have a platform device registered before attempting to grab the interrupts. Reported-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-11-22Merge branch 'cleanups/remove-unused-kconfig' into imx-fixes-for-arndSascha Hauer
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-05 07:58:54 +0000