summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2011-03-07ARM: tegra: seaboard: register i2c devicesOlof Johansson
Register the base i2c devices on seaboard. A few more are pending, but it's a start. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-03-07ARM: tegra: harmony: Beginnings of audio supportStephen Warren
This change includes everything required to enable audio on Harmony, except those parts which rely on code not currently in Tegra's for-next branch, i.e. except those parts which rely on merges of the Tegra I2C driver or latest ASoC subsystem. * Define GPIO names for audio-related GPIOs * Set up platform data and platform device for ASoC machine driver * Register audio-related platform devices * Initialize audio-related clocks * Correctly configure pinmux and GPIO enables for audio-related pins Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-03-07ARM: tegra: create defines for SD-related GPIO namesStephen Warren
This ensures they're kept in sync between platform_data definitions and the GPIO table initialization. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-03-07ARM: tegra: add devices.c entries for audioStephen Warren
For I2S, DAS, PCM devices Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-03-08ARM: EXYNOS4: enabled lcd and backlight in NURI boardDonghwa Lee
This patch enables lcd and backlight drivers in NURI board. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-08ARM: EXYNOS4: Enable watchdog parent clockInderpal Singh
This patch adds the parent clock for watchdog timer for EXYNOS4. Signed-off-by: Inderpal Singh <inderpal.s@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-07Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: mailbox: resolve hang issue OMAP2+: PM: SmartReflex: fix memory leaks in Smartreflex driver arm: mach-omap2: smartreflex: fix another memory leak
2011-03-07ARM: s3c24xx: Switch to common GPIO controlled UDC pullup implementationLars-Peter Clausen
Currently all boards using the s3c2410_udc driver use a GPIO to control the state of the pullup, as a result the same code is reimplemented in each board This patch changes these boards to use the common implementation for GPIO controlled pullup in the UDC driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07USB: s3c2410_udc: Add common implementation for GPIO controlled pullupsLars-Peter Clausen
Currently all boards using the s3c2410_udc driver use a GPIO to control the state of the pullup, as a result the same code is reimplemented in each board file. This patch adds support for using a GPIO to control the pullup state to the udc driver, so the boards can use a common implementation. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07arm: omap4: 4430sdp: drop ehci supportAnand Gadiyar
Most revisions of the OMAP4 Blaze/SDP platform do not have the EHCI signals routed by default. The pads are routed for the alternate HSI functionality instead, and explicit board modifications are needed to route the signals to the USB PHY on the board. Also, turning on the PHY connected to the EHCI port causes a board reboot during bootup due to an unintended short on the rails - this affects many initial revisions of the board, and needs a minor board mod to fix (or as a workaround, one should not attempt to power on the USB PHY). Given that these boards need explicit board mods to even get EHCI working (separate from the accidental short above), we should not attempt to enable EHCI by default. So drop the EHCI support from the board files for the Blaze/SDP platforms. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Keshava Munegowda <keshava_mgowda@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07ARM: mxs: make ssp error irq definition consistentShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mxs: add dma deviceShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mxs: add dma channel definitionsShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mxs/mx23evk: add framebuffer deviceShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mxs: fix typo "GPO" in iomux-mx23.hShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mxs: add helper macro for pad controlShawn Guo
This patch is to add pad control helper macro to make the code easy to read. The need is being seen when adding pad definitions for LCDIF which gets ~30 pads to define. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mxc91231: select MXC_AVICUwe Kleine-König
This fixes: arch/arm/kernel/built-in.o: In function `__irq_svc': io.c:(.text+0x2e0): undefined reference to `avic_base' arch/arm/kernel/built-in.o: In function `__irq_usr': io.c:(.text+0x4c8): undefined reference to `avic_base' arch/arm/mach-mxc91231/built-in.o: In function `mxc91231_init_irq': magx-zn5.c:(.init.text+0x18): undefined reference to `mxc_init_irq' and was broken by c7259df (ARM i.MX irq: Compile avic irq code only on SoCs that need it) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx3x: clean up ARCH_MX3XRichard Zhao
Move to SOC_SOC_IMX3X. Leave ARCH_MX31/35 definitions there, in case some place prevent multi-soc single image. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx5x: clean up ARCH_MX5XRichard Zhao
Move to SOC_SOC_IMX5X. Leave only places which prevent multi-soc using ARCH_MX5X. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM i.MX: introduce imx_otg_ulpi_create to create ULPI transceiversSascha Hauer
The boards are currently using otg_ulpi_create and mxc_ulpi_access_ops, both are only present if CONFIG_USB_ULPI is set. To remove the need of ifdefs in the board code introduce a imx_otg_ulpi_create functions which expands to a static inline function if compiled without ulpi. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM i.MX31 lilly: remove incomplete otg supportSascha Hauer
The platform data for the otg port is present but never used, so remove it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Daniel Mack <daniel@caiaq.de>
2011-03-07ARM i.MX: iomux v1 initialization away from initcallSascha Hauer
This saves us from soc level dispatching in generic files Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM i.MX: Move gpio initialization to SoC specific filesSascha Hauer
This saves us from soc level dispatching in generic files Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07MX1: Add structure, registration functions for framebuffer and rename LCDC INTGwenhael Goavec-Merou
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx5/mx53_evk: Fix IOMUX for UART3Fabio Estevam
On mx53_evk board only RX/TX pins are used on UART3. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx5/mx53_smd: Fix IOMUX for UART2Fabio Estevam
On mx53_smd board only RX/TX pins are used on UART2. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx3/mx35_3ds: Use MX35 USB OTG ErratumFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07arm: mxs: add irq_chip-name for GPIO IRQsWolfram Sang
Reported-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM i.MX23/28: Add framebuffer device supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com>
2011-03-07video: Add i.MX23/28 framebuffer driverSascha Hauer
changes since v2: - use v3 and v4 for specifying the ip version instead of i.MX23/28. This is a better namespace when future versions are added. - rename mach/fb.h to mach/mxsfb.h changes since v1: - Add a LCDC_ prefix to the register names. - use set/clear registers where appropriate - protect call to mxsfb_disable_controller() in mxsfb_remove() with a (host->enabled) as suggested by Lothar Wassmann Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-fbdev@vger.kernel.org
2011-03-07ARM: mxc91231/iomux: allow pin_list to be constUwe Kleine-König
While at it remove some useless consts from unsigned int arguments. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: iomux-imx31: allow pin_list to be constUwe Kleine-König
This fixes the following warning in a mx3_defconfig build: arch/arm/mach-mx3/mach-bug.c: In function 'bug_board_init': arch/arm/mach-mx3/mach-bug.c:47: warning: passing argument 1 of 'mxc_iomux_setup_multiple_pins' discards qualifiers from pointer target type While at it remove some useless consts from unsigned int arguments. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx53_smd: Add I2C supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx25_3ds: Add I2C supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx27_3ds: Add I2C supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx31_3ds: Add I2C supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx35_3ds: Add I2C supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: Add SSI and aic3204 code to Visstrim_M10 boards.Javier Martin
Visstrim_M10 boards have an TI tlv320aic3204 codec attached to SSI1. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx3/cpuimx35: fix build failureUwe Kleine-König
It seems vim's autocompletion played tricks on me without me noticing. This was intruduced in 97976e2 (ARM: mx3: use .init_early to initialize cpu type, reset address and iomuxer) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx53_loco: add esdhc device supportRichard Zhu
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx51/53: add sdhc3/4 clockRichard Zhu
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07arm: mxs: tx28: add i2c bus and connected RTCWolfram Sang
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07arm: mxs: add i2c-devices for mx28Wolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07MX1: Add registration functions for SPI.Gwenhael Goavec-Merou
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07MX1: Add data structure for SPIGwenhael Goavec-Merou
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07MX1: Register clock for SPI2Gwenhael Goavec-Merou
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07MX1: Rename SPI interrupt name and base address.Gwenhael Goavec-Merou
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx35: fix trivial copy/paste errorRyan Lortie
Change imx31_add_imx_keypad() to imx35_add_imx_keypad() in mach-mx3/devices-imx35.h. Signed-off-by: Ryan Lortie <desrt@desrt.ca> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx35: fix ATA_DATA3 pad control addressRyan Lortie
According to the "i.MX35 (MCIMX35) Multimedia Applications Processor Reference Manual" the correct address for the pad control register IOMUXC_SW_PAD_CTL_PAD_ATA_DATA3 is 0x06ec, not 0x6e8. Signed-off-by: Ryan Lortie <desrt@desrt.ca> Acked-by: Marc Reilly <marc@cpdesign.com.au> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07i.MX25: add sdma clock definitionsEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-07-04 16:44:24 +0000