| Age | Commit message (Collapse) | Author |
|---|
|
Conflicts:
fs/ext3/fsync.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
with CONFIG_PROVE_RCU=y, a warning can be triggered:
# mount -t cgroup -o blkio xxx /mnt
# mkdir /mnt/subgroup
...
kernel/cgroup.c:4442 invoked rcu_dereference_check() without protection!
...
To fix this, we avoid caling css_depth() here, which is a bit simpler
than the original code.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
goto has its place, but lets cut back on some of the more
frivolous uses of it.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
This patch fixes few usability and configurability issues.
o All the cgroup based controller options are configurable from
"Genral Setup/Control Group Support/" menu. blkio is the only exception.
Hence make this option visible in above menu and make it configurable from
there to bring it inline with rest of the cgroup based controllers.
o Get rid of CONFIG_DEBUG_CFQ_IOSCHED.
This option currently does two things.
- Enable printing of cgroup paths in blktrace
- Enables CONFIG_DEBUG_BLK_CGROUP, which in turn displays additional stat
files in cgroup.
If we are using group scheduling, blktrace data is of not really much use
if cgroup information is not present. To get this data, currently one has to
also enable CONFIG_DEBUG_CFQ_IOSCHED, which in turn brings the overhead of
all the additional debug stat files which is not desired.
Hence, this patch moves printing of cgroup paths under
CONFIG_CFQ_GROUP_IOSCHED.
This allows us to get rid of CONFIG_DEBUG_CFQ_IOSCHED completely. Now all
the debug stat files are controlled only by CONFIG_DEBUG_BLK_CGROUP which
can be enabled through config menu.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Divyesh Shah <dpshah@google.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
o Once in a while, I was hitting a BUG_ON() in blkio code. empty_time was
assuming that upon slice expiry, group can't be marked empty already (except
forced dispatch).
But this assumption is broken if cfqq can move (group_isolation=0) across
groups after receiving a request.
I think most likely in this case we got a request in a cfqq and accounted
the rq in one group, later while adding the cfqq to tree, we moved the queue
to a different group which was already marked empty and after dispatch from
slice we found group already marked empty and raised alarm.
This patch does not error out if group is already marked empty. This can
introduce some empty_time stat error only in case of group_isolation=0. This
is better than crashing. In case of group_isolation=1 we should still get
same stats as before this patch.
[ 222.308546] ------------[ cut here ]------------
[ 222.309311] kernel BUG at block/blk-cgroup.c:236!
[ 222.309311] invalid opcode: 0000 [#1] SMP
[ 222.309311] last sysfs file: /sys/devices/virtual/block/dm-3/queue/scheduler
[ 222.309311] CPU 1
[ 222.309311] Modules linked in: dm_round_robin dm_multipath qla2xxx scsi_transport_fc dm_zero dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan]
[ 222.309311]
[ 222.309311] Pid: 4780, comm: fio Not tainted 2.6.34-rc4-blkio-config #68 0A98h/HP xw8600 Workstation
[ 222.309311] RIP: 0010:[<ffffffff8121ad88>] [<ffffffff8121ad88>] blkiocg_set_start_empty_time+0x50/0x83
[ 222.309311] RSP: 0018:ffff8800ba6e79f8 EFLAGS: 00010002
[ 222.309311] RAX: 0000000000000082 RBX: ffff8800a13b7990 RCX: ffff8800a13b7808
[ 222.309311] RDX: 0000000000002121 RSI: 0000000000000082 RDI: ffff8800a13b7a30
[ 222.309311] RBP: ffff8800ba6e7a18 R08: 0000000000000000 R09: 0000000000000001
[ 222.309311] R10: 000000000002f8c8 R11: ffff8800ba6e7ad8 R12: ffff8800a13b78ff
[ 222.309311] R13: ffff8800a13b7990 R14: 0000000000000001 R15: ffff8800a13b7808
[ 222.309311] FS: 00007f3beec476f0(0000) GS:ffff880001e40000(0000) knlGS:0000000000000000
[ 222.309311] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 222.309311] CR2: 000000000040e7f0 CR3: 00000000a12d5000 CR4: 00000000000006e0
[ 222.309311] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 222.309311] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 222.309311] Process fio (pid: 4780, threadinfo ffff8800ba6e6000, task ffff8800b3d6bf00)
[ 222.309311] Stack:
[ 222.309311] 0000000000000001 ffff8800bab17a48 ffff8800bab17a48 ffff8800a13b7800
[ 222.309311] <0> ffff8800ba6e7a68 ffffffff8121da35 ffff880000000001 00ff8800ba5c5698
[ 222.309311] <0> ffff8800ba6e7a68 ffff8800a13b7800 0000000000000000 ffff8800bab17a48
[ 222.309311] Call Trace:
[ 222.309311] [<ffffffff8121da35>] __cfq_slice_expired+0x2af/0x3ec
[ 222.309311] [<ffffffff8121fd7b>] cfq_dispatch_requests+0x2c8/0x8e8
[ 222.309311] [<ffffffff8120f1cd>] ? spin_unlock_irqrestore+0xe/0x10
[ 222.309311] [<ffffffff8120fb1a>] ? blk_insert_cloned_request+0x70/0x7b
[ 222.309311] [<ffffffff81210461>] blk_peek_request+0x191/0x1a7
[ 222.309311] [<ffffffffa0002799>] dm_request_fn+0x38/0x14c [dm_mod]
[ 222.309311] [<ffffffff810ae61f>] ? sync_page_killable+0x0/0x35
[ 222.309311] [<ffffffff81210fd4>] __generic_unplug_device+0x32/0x37
[ 222.309311] [<ffffffff81211274>] generic_unplug_device+0x2e/0x3c
[ 222.309311] [<ffffffffa00011a6>] dm_unplug_all+0x42/0x5b [dm_mod]
[ 222.309311] [<ffffffff8120ca37>] blk_unplug+0x29/0x2d
[ 222.309311] [<ffffffff8120ca4d>] blk_backing_dev_unplug+0x12/0x14
[ 222.309311] [<ffffffff81109a7a>] block_sync_page+0x35/0x39
[ 222.309311] [<ffffffff810ae616>] sync_page+0x41/0x4a
[ 222.309311] [<ffffffff810ae62d>] sync_page_killable+0xe/0x35
[ 222.309311] [<ffffffff8158aa59>] __wait_on_bit_lock+0x46/0x8f
[ 222.309311] [<ffffffff810ae4f5>] __lock_page_killable+0x66/0x6d
[ 222.309311] [<ffffffff81056f9c>] ? wake_bit_function+0x0/0x33
[ 222.309311] [<ffffffff810ae528>] lock_page_killable+0x2c/0x2e
[ 222.309311] [<ffffffff810afbc5>] generic_file_aio_read+0x361/0x4f0
[ 222.309311] [<ffffffff810ea044>] do_sync_read+0xcb/0x108
[ 222.309311] [<ffffffff811e42f7>] ? security_file_permission+0x16/0x18
[ 222.309311] [<ffffffff810ea6ab>] vfs_read+0xab/0x108
[ 222.309311] [<ffffffff810ea7c8>] sys_read+0x4a/0x6e
[ 222.309311] [<ffffffff81002b5b>] system_call_fastpath+0x16/0x1b
[ 222.309311] Code: 58 01 00 00 00 48 89 c6 75 0a 48 83 bb 60 01 00 00 00 74 09 48 8d bb a0 00 00 00 eb 35 41 fe cc 74 0d f6 83 c0 01 00 00 04 74 04 <0f> 0b eb fe 48 89 75 e8 e8 be e0 de ff 66 83 8b c0 01 00 00 04
[ 222.309311] RIP [<ffffffff8121ad88>] blkiocg_set_start_empty_time+0x50/0x83
[ 222.309311] RSP <ffff8800ba6e79f8>
[ 222.309311] ---[ end trace 32b4f71dffc15712 ]---
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Divyesh Shah <dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
This fixes the lockdep warning reported by Gui Jianfeng.
Signed-off-by: Divyesh Shah <dpshah@google.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Fixes compile errors in blk-cgroup code for empty_time stat and a merge fix in
CFQ. The first error was when CONFIG_DEBUG_CFQ_IOSCHED is not set.
Signed-off-by: Divyesh Shah <dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Conflicts:
block/blk-cgroup.c
block/cfq-iosched.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Changelog from v1:
o Call blkiocg_update_idle_time_stats() at cfq_rq_enqueued() instead of at
dispatch time.
Changelog from original patchset: (in response to Vivek Goyal's comments)
o group blkiocg_update_blkio_group_dequeue_stats() with other DEBUG functions
o rename blkiocg_update_set_active_queue_stats() to
blkiocg_update_avg_queue_size_stats()
o s/request/io/ in blkiocg_update_request_add_stats() and
blkiocg_update_request_remove_stats()
o Call cfq_del_timer() at request dispatch() instead of
blkiocg_update_idle_time_stats()
Signed-off-by: Divyesh Shah<dpshah@google.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Currently, IO Controller makes use of blkio.weight to assign weight for
all devices. Here a new user interface "blkio.weight_device" is introduced to
assign different weights for different devices. blkio.weight becomes the
default value for devices which are not configured by "blkio.weight_device"
You can use the following format to assigned specific weight for a given
device:
#echo "major:minor weight" > blkio.weight_device
major:minor represents device number.
And you can remove weight for a given device as following:
#echo "major:minor 0" > blkio.weight_device
V1->V2 changes:
- use user interface "weight_device" instead of "policy" suggested by Vivek
- rename some struct suggested by Vivek
- rebase to 2.6-block "for-linus" branch
- remove an useless list_empty check pointed out by Li Zefan
- some trivial typo fix
V2->V3 changes:
- Move policy_*_node() functions up to get rid of forward declarations
- rename related functions by adding prefix "blkio_"
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
1) group_wait_time - This is the amount of time the cgroup had to wait to get a
timeslice for one of its queues from when it became busy, i.e., went from 0
to 1 request queued. This is different from the io_wait_time which is the
cumulative total of the amount of time spent by each IO in that cgroup waiting
in the scheduler queue. This stat is a great way to find out any jobs in the
fleet that are being starved or waiting for longer than what is expected (due
to an IO controller bug or any other issue).
2) empty_time - This is the amount of time a cgroup spends w/o any pending
requests. This stat is useful when a job does not seem to be able to use its
assigned disk share by helping check if that is happening due to an IO
controller bug or because the job is not submitting enough IOs.
3) idle_time - This is the amount of time spent by the IO scheduler idling
for a given cgroup in anticipation of a better request than the exising ones
from other queues/cgroups.
All these stats are recorded using start and stop events. When reading these
stats, we do not add the delta between the current time and the last start time
if we're between the start and stop events. We avoid doing this to make sure
that these numbers are always monotonically increasing when read. Since we're
using sched_clock() which may use the tsc as its source, it may induce some
inconsistency (due to tsc resync across cpus) if we included the current delta.
Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
These stats are useful for getting a feel for the queue depth of the cgroup,
i.e., how filled up its queues are at a given instant and over the existence of
the cgroup. This ability is useful when debugging problems in the wild as it
helps understand the application's IO pattern w/o having to read through the
userspace code (coz its tedious or just not available) or w/o the ability
to run blktrace (since you may not have root access and/or not want to disturb
performance).
Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
This includes both the number of bios merged into requests belonging to this
cgroup as well as the number of requests merged together.
In the past, we've observed different merging behavior across upstream kernels,
some by design some actual bugs. This stat helps a lot in debugging such
problems when applications report decreased throughput with a new kernel
version.
This needed adding an extra elevator function to capture bios being merged as I
did not want to pollute elevator code with blkiocg knowledge and hence needed
the accounting invocation to come from CFQ.
Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
that include some minor fixes and addresses all comments.
Changelog: (most based on Vivek Goyal's comments)
o renamed blkiocg_reset_write to blkiocg_reset_stats
o more clarification in the documentation on io_service_time and io_wait_time
o Initialize blkg->stats_lock
o rename io_add_stat to blkio_add_stat and declare it static
o use bool for direction and sync
o derive direction and sync info from existing rq methods
o use 12 for major:minor string length
o define io_service_time better to cover the NCQ case
o add a separate reset_stats interface
o make the indexed stats a 2d array to simplify macro and function pointer code
o blkio.time now exports in jiffies as before
o Added stats description in patch description and
Documentation/cgroup/blkio-controller.txt
o Prefix all stats functions with blkio and make them static as applicable
o replace IO_TYPE_MAX with IO_TYPE_TOTAL
o Moved #define constant to top of blk-cgroup.c
o Pass dev_t around instead of char *
o Add note to documentation file about resetting stats
o use BLK_CGROUP_MODULE in addition to BLK_CGROUP config option in #ifdef
statements
o Avoid struct request specific knowledge in blk-cgroup. blk-cgroup.h now has
rq_direction() and rq_sync() functions which are used by CFQ and when using
io-controller at a higher level, bio_* functions can be added.
Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
We also add start_time_ns and io_start_time_ns fields to struct request
here to record the time when a request is created and when it is
dispatched to device. We use ns uints here as ms and jiffies are
not very useful for non-rotational media.
Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
- io_service_time
- io_wait_time
- io_serviced
- io_service_bytes
These stats are accumulated per operation type helping us to distinguish between
read and write, and sync and async IO. This patch does not increment any of
these stats.
Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
that info at request dispatch with other stats now. This patch removes the
existing support for accounting sectors for a blkio_group. This will be added
back differently in the next two patches.
Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
|
Modify the Block I/O cgroup subsystem to be able to be built as a module.
As the CFQ disk scheduler optionally depends on blk-cgroup, config options
in block/Kconfig, block/Kconfig.iosched, and block/blk-cgroup.h are
enhanced to support the new module dependency.
Signed-off-by: Ben Blum <bblum@andrew.cmu.edu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There's no need to take css reference here, for the caller
has already called rcu_read_lock() to prevent cgroup from
being removed.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
I triggered a lockdep warning as following.
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.33-rc2 #1
-------------------------------------------------------
test_io_control/7357 is trying to acquire lock:
(blkio_list_lock){+.+...}, at: [<c053a990>] blkiocg_weight_write+0x82/0x9e
but task is already holding lock:
(&(&blkcg->lock)->rlock){......}, at: [<c053a949>] blkiocg_weight_write+0x3b/0x9e
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&(&blkcg->lock)->rlock){......}:
[<c04583b7>] validate_chain+0x8bc/0xb9c
[<c0458dba>] __lock_acquire+0x723/0x789
[<c0458eb0>] lock_acquire+0x90/0xa7
[<c0692b0a>] _raw_spin_lock_irqsave+0x27/0x5a
[<c053a4e1>] blkiocg_add_blkio_group+0x1a/0x6d
[<c053cac7>] cfq_get_queue+0x225/0x3de
[<c053eec2>] cfq_set_request+0x217/0x42d
[<c052c8a6>] elv_set_request+0x17/0x26
[<c0532a0f>] get_request+0x203/0x2c5
[<c0532ae9>] get_request_wait+0x18/0x10e
[<c0533470>] __make_request+0x2ba/0x375
[<c0531985>] generic_make_request+0x28d/0x30f
[<c0532da7>] submit_bio+0x8a/0x8f
[<c04d827a>] submit_bh+0xf0/0x10f
[<c04d91d2>] ll_rw_block+0xc0/0xf9
[<f86e9705>] ext3_find_entry+0x319/0x544 [ext3]
[<f86eae58>] ext3_lookup+0x2c/0xb9 [ext3]
[<c04c3e1b>] do_lookup+0xd3/0x172
[<c04c56c8>] link_path_walk+0x5fb/0x95c
[<c04c5a65>] path_walk+0x3c/0x81
[<c04c5b63>] do_path_lookup+0x21/0x8a
[<c04c66cc>] do_filp_open+0xf0/0x978
[<c04c0c7e>] open_exec+0x1b/0xb7
[<c04c1436>] do_execve+0xbb/0x266
[<c04081a9>] sys_execve+0x24/0x4a
[<c04028a2>] ptregs_execve+0x12/0x18
-> #1 (&(&q->__queue_lock)->rlock){..-.-.}:
[<c04583b7>] validate_chain+0x8bc/0xb9c
[<c0458dba>] __lock_acquire+0x723/0x789
[<c0458eb0>] lock_acquire+0x90/0xa7
[<c0692b0a>] _raw_spin_lock_irqsave+0x27/0x5a
[<c053dd2a>] cfq_unlink_blkio_group+0x17/0x41
[<c053a6eb>] blkiocg_destroy+0x72/0xc7
[<c0467df0>] cgroup_diput+0x4a/0xb2
[<c04ca473>] dentry_iput+0x93/0xb7
[<c04ca4b3>] d_kill+0x1c/0x36
[<c04cb5c5>] dput+0xf5/0xfe
[<c04c6084>] do_rmdir+0x95/0xbe
[<c04c60ec>] sys_rmdir+0x10/0x12
[<c04027cc>] sysenter_do_call+0x12/0x32
-> #0 (blkio_list_lock){+.+...}:
[<c0458117>] validate_chain+0x61c/0xb9c
[<c0458dba>] __lock_acquire+0x723/0x789
[<c0458eb0>] lock_acquire+0x90/0xa7
[<c06929fd>] _raw_spin_lock+0x1e/0x4e
[<c053a990>] blkiocg_weight_write+0x82/0x9e
[<c0467f1e>] cgroup_file_write+0xc6/0x1c0
[<c04bd2f3>] vfs_write+0x8c/0x116
[<c04bd7c6>] sys_write+0x3b/0x60
[<c04027cc>] sysenter_do_call+0x12/0x32
other info that might help us debug this:
1 lock held by test_io_control/7357:
#0: (&(&blkcg->lock)->rlock){......}, at: [<c053a949>] blkiocg_weight_write+0x3b/0x9e
stack backtrace:
Pid: 7357, comm: test_io_control Not tainted 2.6.33-rc2 #1
Call Trace:
[<c045754f>] print_circular_bug+0x91/0x9d
[<c0458117>] validate_chain+0x61c/0xb9c
[<c0458dba>] __lock_acquire+0x723/0x789
[<c0458eb0>] lock_acquire+0x90/0xa7
[<c053a990>] ? blkiocg_weight_write+0x82/0x9e
[<c06929fd>] _raw_spin_lock+0x1e/0x4e
[<c053a990>] ? blkiocg_weight_write+0x82/0x9e
[<c053a990>] blkiocg_weight_write+0x82/0x9e
[<c0467f1e>] cgroup_file_write+0xc6/0x1c0
[<c0454df5>] ? trace_hardirqs_off+0xb/0xd
[<c044d93a>] ? cpu_clock+0x2e/0x44
[<c050e6ec>] ? security_file_permission+0xf/0x11
[<c04bcdda>] ? rw_verify_area+0x8a/0xad
[<c0467e58>] ? cgroup_file_write+0x0/0x1c0
[<c04bd2f3>] vfs_write+0x8c/0x116
[<c04bd7c6>] sys_write+0x3b/0x60
[<c04027cc>] sysenter_do_call+0x12/0x32
To prevent deadlock, we should take locks as following sequence:
blkio_list_lock -> queue_lock -> blkcg_lock.
The following patch should fix this bug.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
o One of the goals of block IO controller is that it should be able to
support mulitple io control policies, some of which be operational at
higher level in storage hierarchy.
o To begin with, we had one io controlling policy implemented by CFQ, and
I hard coded the CFQ functions called by blkio. This created issues when
CFQ is compiled as module.
o This patch implements a basic dynamic io controlling policy registration
functionality in blkio. This is similar to elevator functionality where
ioschedulers register the functions dynamically.
o Now in future, when more IO controlling policies are implemented, these
can dynakically register with block IO controller.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
o blkio controller is inside the kernel and cfq makes use of interfaces
exported by blkio. CFQ can be a module too, hence export symbols used
by CFQ.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
They should not be declared inside some other file that's not related
to CFQ.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
o Propagate blkio cgroup weight updation to associated cfq groups.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
o Export disk time and sector used by a group to user space through cgroup
interface.
o Also export a "dequeue" interface to cgroup which keeps track of how many
a times a group was deleted from service tree. Helps in debugging.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
o Some debugging aids for CFQ.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
o One can choose to change elevator or delete a cgroup. Implement group
reference counting so that both elevator exit and cgroup deletion can
take place gracefully.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Nauman Rafique <nauman@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
o This is basic implementation of blkio controller cgroup interface. This is
the common interface visible to user space and should be used by different
IO control policies as we implement those.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
