summaryrefslogtreecommitdiffstats
path: root/drivers/acpi/Kconfig
AgeCommit message (Collapse)Author
2012-09-29efi: Fix the ACPI BGRT driver for images located in EFI boot services memoryJosh Triplett
The ACPI BGRT driver accesses the BIOS logo image when it initializes. However, ACPI 5.0 (which introduces the BGRT) recommends putting the logo image in EFI boot services memory, so that the OS can reclaim that memory. Production systems follow this recommendation, breaking the ACPI BGRT driver. Move the bulk of the BGRT code to run during a new EFI late initialization phase, which occurs after switching EFI to virtual mode, and after initializing ACPI, but before freeing boot services memory. Copy the BIOS logo image to kernel memory at that point, and make it accessible to the BGRT driver. Rework the existing ACPI BGRT driver to act as a simple wrapper exposing that image (and the properties from the BGRT) via sysfs. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Link: http://lkml.kernel.org/r/93ce9f823f1c1f3bb88bdd662cce08eee7a17f5d.1348876882.git.josh@joshtriplett.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-06-04drivers: acpi: Fix dependency for ACPI_HOTPLUG_CPUFabio Estevam
Fix the following build warning: warning: (ACPI_HOTPLUG_CPU) selects ACPI_CONTAINER which has unmet direct dependencies (ACPI && EXPERIMENTAL) Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30ACPI: Add support for exposing BGRT dataMatthew Garrett
ACPI 5.0 adds the BGRT, a table that contains a pointer to the firmware boot splash and associated metadata. This simple driver exposes it via /sys/firmware/acpi in order to allow bootsplash applications to draw their splash around the firmware image and reduce the number of jarring graphical transitions during boot. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-04Kconfig: acpi: Fix typo in comment.Justin P. Mattock
The below fixes a typo I found in a comment. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-29Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI EC: remove redundant code ACPI: Add D3 cold state ACPI: processor: fix processor_physically_present in UP kernel ACPI: Split out custom_method functionality into an own driver ACPI: Cleanup custom_method debug stuff ACPI EC: enable MSI workaround for Quanta laptops ACPICA: Update to version 20110413 ACPICA: Execute an orphan _REG method under the EC device ACPICA: Move ACPI_NUM_PREDEFINED_REGIONS to a more appropriate place ACPICA: Update internal address SpaceID for DataTable regions ACPICA: Add more methods eligible for NULL package element removal ACPICA: Split all internal Global Lock functions to new file - evglock ACPI: EC: add another DMI check for ASUS hardware ACPI EC: remove dead code ACPICA: Fix code divergence of global lock handling ACPICA: Use acpi_os_create_lock interface ACPI: osl, add acpi_os_create_lock interface ACPI:Fix goto flows in thermal-sys
2011-05-29ACPI: Split out custom_method functionality into an own driverThomas Renninger
With /sys/kernel/debug/acpi/custom_method root can write to arbitrary memory and increase his priveleges, even if these are restricted. -> Make this an own debug .config option and warn about the security issue in the config description. -> Still keep acpi/debugfs.c which now only creates an empty /sys/kernel/debug/acpi directory. There might be other users of it later. Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: rui.zhang@intel.com Signed-off-by: Len Brown <len.brown@intel.com>
2011-05-25Move ACPI power meter driver to hwmonJean Delvare
As discussed earlier, the ACPI power meter driver would better live in drivers/hwmon, as its only purpose is to create hwmon-style interfaces for ACPI 4.0 power meter devices. Users are more likely to look for it there, and less likely to accidentally hide it by unselecting its dependencies. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: "Darrick J. Wong" <djwong@us.ibm.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Len Brown <lenb@kernel.org>
2011-03-15PM / ACPI: Remove references to pm_flags from bus.cRafael J. Wysocki
If direct references to pm_flags are removed from drivers/acpi/bus.c, CONFIG_ACPI will not need to depend on CONFIG_PM any more. Make that happen. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Len Brown <len.brown@intel.com>
2011-01-20kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-12Merge branch 'kconfig-text' into releaseLen Brown
2011-01-12Merge branch 'ipmi' into releaseLen Brown
2011-01-12ACPI: delete CONFIG_ACPI_PROCFS_POWER and power procfs I/F in 2.6.39Zhang Rui
sysfs I/F for ACPI power devices, including AC and Battery, has been working in upstream kenrel since 2.6.24, Sep 2007. In 2.6.37, we made the sysfs I/F always built in and this option disabled by default. Now, we plan to remove this option and the ACPI power procfs interface in 2.6.39. First, update the feature-removal-schedule to announce this change. Second, add runtime warnings in ACPI AC/Battery/SBS driver, so that users will notice this change even if "make oldconfig" is used. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12ACPI: update CONFIG_ACPI_PROCFS descriptionZhang Rui
Update CONFIG_ACPI_PROCFS description because the processor, video and thermal zone procfs I/F have been removed. Some ACPI drivers, e.g. button, have their procfs I/F always built in, because we don't have sysfs I/F replacement at the moment. But once we finish developing the sysfs I/F for these driver, we need CONFIG_ACPI_PROCFS to enabled/disable the corresponding procfs I/F. So just updating the description rather than removing this option, although there is no procfs I/F depends on it for now. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-12-14IPMI/ACPI: Add the IPMI opregion driver to enable ACPI to access BMC controllerZhao Yakui
ACPI 4.0 spec adds the ACPI IPMI opregion, which means that the ACPI AML code can also communicate with the BMC controller. This is to install the ACPI IPMI opregion and enable the ACPI to access the BMC controller through the IPMI message. It will create IPMI user interface for every IPMI device detected in ACPI namespace and install the corresponding IPMI opregion space handler. Then it can enable ACPI to access the BMC controller through the IPMI message. The following describes how to process the IPMI request in IPMI space handler: 1. format the IPMI message based on the request in AML code. IPMI system address. Now the address type is SYSTEM_INTERFACE_ADDR_TYPE IPMI net function & command IPMI message payload 2. send the IPMI message by using the function of ipmi_request_settime 3. wait for the completion of IPMI message. It can be done in different routes: One is in handled in IPMI user recv callback function. Another is handled in timeout function. 4. format the IPMI response and return it to ACPI AML code. At the same time it also addes the module dependency. The ACPI IPMI opregion will depend on the IPMI subsystem. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-12-14ACPI processor: remove processor throttling control procfs I/FZhang Rui
Remove deprecated ACPI process procfs I/F for throttling control. This is because the t-state control should only be done in kernel, when system is in a overheating state. Now users can only change the processor t-state indirectly, by poking the cooling device sysfs I/F of the processor. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-26Merge branch 'misc' into releaseLen Brown
2010-10-19ACPI: Only processor needs CPU_IDLEJean Delvare
ACPI support itself doesn't need CPU_IDLE, only ACPI_PROCESSOR does, so only ACPI_PROCESSOR should select CPU_IDLE. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-15ACPI ac/battery/sbs: sysfs I/F always built in, procfs I/F disabled by defaultZhang Rui
ACPI AC/Battery/SBS driver has different kernel option for procfs and sysfs I/F. This patch, 1. Change CONFIG_ACPI_PROCFS_POWER to 'n' by default so that we can remove it in the next release or two. 2. Remove CONFIG_ACPI_SYSFS_POWER and always build in the sysfs I/F of these drivers. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-28ACPI: Kconfig: fix typo.Andrea Gelmini
"power of" -> "power off" Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15Merge branch 'linus' into releaseLen Brown
Conflicts: drivers/acpi/debug.c Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15ACPI thermal: make procfs I/F depend on CONFIG_ACPI_PROCFSZhang Rui
Mark the ACPI thermal procfs I/F deprecated, because /sys/class/thermal/ is already available and has been working for years w/o any problem. The ACPI thermal procfs I/F will be removed in 2.6.37. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15ACPI video: make procfs I/F depend on CONFIG_ACPI_PROCFSZhang Rui
Mark ACPI video driver procfs I/F deprecated, including: /proc/acpi/video/*/info /proc/acpi/video/*/DOS /proc/acpi/video/*/ROM /proc/acpi/video/*/POST /proc/acpi/video/*/POST_info /proc/acpi/video/*/*/info /proc/acpi/video/*/*/state /proc/acpi/video/*/*/EDID and /proc/acpi/video/*/*/brightness, because 1. we already have the sysfs I/F /sysclass/backlight/ as the replacement of /proc/acpi/video/*/*/brightness. 2. the other procfs I/F is not useful for userspace. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15ACPI processor: remove deprecated ACPI procfs I/FZhang Rui
Remove deprecated ACPI processor procfs I/F, including: /proc/acpi/processor/CPUX/power /proc/acpi/processor/CPUX/limit /proc/acpi/processor/CPUX/info /proc/acpi/processor/CPUX/throttling still exists, as we don't have sysfs I/F available for now. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15ACPI: remove deprecated ACPI procfs I/FZhang Rui
Rmove deprecated ACPI procfs I/F, including /proc/acpi/debug_layer /proc/acpi/debug_level /proc/acpi/info /proc/acpi/dsdt /proc/acpi/fadt /proc/acpi/sleep because the sysfs I/F is already available and has been working well for years. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-03acpi ec_sys: Be more cautious about ec write accessThomas Renninger
- Set Kconfig option default n - Only allow root to read/write io file (sever bug!) - Introduce write support module param -> default off - Properly clean up if any debugfs files cannot be created Signed-off-by: Thomas Renninger <trenn@suse.de> CC: mjg59@srcf.ucam.org CC: platform-driver-x86@vger.kernel.org CC: linux-acpi@vger.kernel.org CC: astarikovskiy@suse.de Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03ACPI: Provide /sys/kernel/debug/ec/...Thomas Renninger
This patch provides the same information through debugfs, which previously was provided through /proc/acpi/embedded_controller/*/info This is the gpe the EC is connected to and whether the global lock gets used. The io ports used are added to /proc/ioports in another patch. Beside the fact that /proc/acpi is deprecated for quite some time, this info is not needed for applications and thus can be moved to debugfs instead of a public interface like /sys. Signed-off-by: Thomas Renninger <trenn@suse.de> CC: Alexey Starikovskiy <astarikovskiy@suse.de> CC: Len Brown <lenb@kernel.org> CC: linux-kernel@vger.kernel.org CC: linux-acpi@vger.kernel.org CC: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: platform-driver-x86@vger.kernel.org Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-05-19ACPI Hardware Error Device (PNP0C33) supportHuang Ying
Hardware Error Device (PNP0C33) is used to report some hardware errors notified via SCI, mainly the corrected errors. Some APEI Generic Hardware Error Source (GHES) may use SCI on hardware error device to notify hardware error to kernel. After receiving notification from ACPI core, it is forwarded to all listeners via a notifier chain. The listener such as APEI GHES should check corresponding error source for new events when notified. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-19ACPI, APEI, APEI supporting infrastructureHuang Ying
APEI stands for ACPI Platform Error Interface, which allows to report errors (for example from the chipset) to the operating system. This improves NMI handling especially. In addition it supports error serialization and error injection. For more information about APEI, please refer to ACPI Specification version 4.0, chapter 17. This patch provides some common functions used by more than one APEI tables, mainly framework of interpreter for EINJ and ERST. A machine readable language is defined for EINJ and ERST for OS to execute, and so to drive the firmware to fulfill the corresponding functions. The machine language for EINJ and ERST is compatible, so a common framework is defined for them. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-10-09ACPI: Kconfig, fix proc aggregator textJiri Slaby
Fix two typos in the Kconfig text about ACPI_PROCESSOR_AGGREGATOR. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-10-04Merge branch 'acpi-pad' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'acpi-pad' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: acpi_pad: build only on X86 ACPI: create Processor Aggregator Device driver Fixup trivial conflicts in MAINTAINERS file.
2009-09-27acpi_pad: build only on X86Len Brown
X86_FEATURE_MWAIT doesn't exist on ia64... Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-19Merge branch 'processor-procfs-2.6.32' into releaseLen Brown
2009-09-19hwmon driver for ACPI 4.0 power metersDarrick J. Wong
This driver exposes ACPI 4.0 compliant power meters as hardware monitoring devices. This second revision of the driver also exports the ACPI string info as sysfs attributes, a list of the devices that the meter measures, and will send ACPI notifications over the ACPI netlink socket. This latest revision only enables the power capping controls if it can be confirmed that the power cap can be enforced by the hardware and explains how the notification interfaces work. [akpm@linux-foundation.org: remove default-y] [akpm@linux-foundation.org: build fix] Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-07-31ACPI: create Processor Aggregator Device driverShaohua Li
ACPI 4.0 created the logical "processor aggregator device" as a mechinism for platforms to ask the OS to force otherwise busy processors to enter (power saving) idle. The intent is to lower power consumption to ride-out transient electrical and thermal emergencies, rather than powering off the server. On platforms that can save more power/performance via P-states, the platform will first exhaust P-states before forcing idle. However, the relative benefit of P-states vs. idle states is platform dependent, and thus this driver need not know or care about it. This driver does not use the kernel's CPU hot-plug mechanism because after the transient emergency is over, the system must be returned to its normal state, and hotplug would permanently break both cpusets and binding. So to force idle, the driver creates a power saving thread. The scheduler will migrate the thread to the preferred CPU. The thread has max priority and has SCHED_RR policy, so it can occupy one CPU. To save power, the thread will invoke the deep C-state entry instructions. To avoid starvation, the thread will sleep 5% of the time time for every second (current RT scheduler has threshold to avoid starvation, but if other CPUs are idle, the CPU can borrow CPU timer from other, which makes the mechanism not work here) Vaidyanathan Srinivasan has proposed scheduler enhancements to allow injecting idle time into the system. This driver doesn't depend on those enhancements, but could cut over to them when they are available. Peter Z. does not favor upstreaming this driver until the those scheduler enhancements are in place. However, we favor upstreaming this driver now because it is useful now, and can be enhanced over time. Signed-off-by: Shaohua Li <shaohua.li@intel.com> NACKed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24ACPI: Make ACPI processor proc I/F depend on the ACPI_PROCFSZhao Yakui
Now whether the ACPI processor proc I/F is registered depends on the CONFIG_PROC. It had better depend on the CONFIG_ACPI_PROCFS. When the CONFIG_ACPI_PROCFS is unset in kernel configuration, the ACPI processor proc I/F won't be registered. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18PCI: drivers/pci/slot.c should depend on CONFIG_SYSFSAlex Chiang
There is no way to interact with a physical PCI slot without sysfs, so encode the dependency and prevent this build error: drivers/pci/slot.c: In function 'pci_hp_create_module_link': drivers/pci/slot.c:327: error: 'module_kset' undeclared This patch _should_ make pci-sysfs.o depend on CONFIG_SYSFS too, but we cannot (yet) because the PCI core merrily assumes the existence of sysfs: drivers/built-in.o: In function `pci_bus_add_device': drivers/pci/bus.c:89: undefined reference to `pci_create_sysfs_dev_files' drivers/built-in.o: In function `pci_stop_dev': drivers/pci/remove.c:24: undefined reference to `pci_remove_sysfs_dev_files' So do the minimal bit for now and figure out how to untangle it later. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fix-suggested-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-17ACPI: update Kconfig help texts (no functional changes)Bjorn Helgaas
Use "help" (not "---help---") consistently throughout. ACPI can't be a module, so if both ACPI & APM are configured, we use ACPI. Update pointers to ACPI CA and Linux ACPI projects. Replace "Compaq" with "Hewlett-Packard" in the spec developer list. Fix typo in /sys/module path. The user-space daemon is "acpid", not "acpi". Add standard "To compile this driver as a module ..." help text. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-21ACPI: remove CONFIG_ACPI_SYSTEMBjorn Helgaas
Remove CONFIG_ACPI_SYSTEM. It was always set the same as CONFIG_ACPI, and it had no menu label, so there was no way to set it to anything other than "y". Some things under CONFIG_ACPI_SYSTEM (acpi_irq_handled, acpi_os_gpe_count(), event_is_open, register_acpi_notifier(), etc.) are used unconditionally by the CA, the OSPM, and drivers, so we depend on them always being present. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-07Merge branches 'release', 'asus', 'bugzilla-12450', 'cpuidle', 'debug', ↵Len Brown
'ec', 'misc', 'printk' and 'processor' into release
2009-02-07ACPI: Kconfig text - Fix the ACPI_CONTAINER module name according to the ↵Thierry Vignaud
real module name. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-06ACPI: delete CPU_IDLE=n codeLen Brown
CPU_IDLE=y has been default for ACPI=y since Nov-2007, and has shipped in many distributions since then. Here we delete the CPU_IDLE=n ACPI idle code, since nobody should be using it, and we don't want to maintain two versions. Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-19ACPI: move wmi, asus_acpi, toshiba_acpi to drivers/platform/x86Len Brown
These are platform specific drivers that happen to use ACPI, while drivers/acpi/ is for code that implements ACPI itself. Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-07ACPI: update debug parameter documentationBjorn Helgaas
Reformat acpi.debug_layer and acpi.debug_level documentation so it's more readable, add some clues about how to figure out the mask bits that enable a specific ACPI_DEBUG_PRINT statement, and include some useful examples. Move the list of masks to Documentation/acpi/debug.txt (these are copies of the authoritative values in acoutput.h and acpi_drivers.h). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06ACPI: remove CONFIG_ACPI_ECBjorn Helgaas
Remove CONFIG_ACPI_EC. It was always set the same as CONFIG_ACPI, and it had no menu label, so there was no way to set it to anything other than "y". Per section 6.5.4 of the ACPI 3.0b specification, OSPM must make Embedded Controller operation regions, accessed via the Embedded Controllers described in ECDT, available before executing any control method. The ECDT table is optional, but if it is present, the above text means that the EC it describes is a required part of the ACPI subsystem, so CONFIG_ACPI_EC=n wouldn't make sense. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06ACPI: remove CONFIG_ACPI_POWERBjorn Helgaas
Remove CONFIG_ACPI_POWER. It was always set the same as CONFIG_ACPI, and it had no menu label, so there was no way to set it to anything other than "y". The interfaces under CONFIG_ACPI_POWER (acpi_device_sleep_wake(), acpi_power_transition(), etc) are called unconditionally from the ACPI core, so we already depend on it always being present. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-23dock: make dock driver not a moduleShaohua Li
To avoid dock driver is loaded after other drivers like libata, let's make dock driver not a module. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-23Merge branch 'linus' into testLen Brown
Conflicts: MAINTAINERS arch/x86/kernel/acpi/boot.c arch/x86/kernel/acpi/sleep.c drivers/acpi/Kconfig drivers/pnp/Makefile drivers/pnp/quirks.c Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22Merge branch 'misc' into testLen Brown
2008-10-22ACPI suspend: Fix CONFIG_ACPI_SLEEP dependence and some compilation warningsRafael J. Wysocki
Initially CONFIG_PM_SLEEP was defined as CONFIG_SUSPEND || CONFIG_HIBERNATION and some ACPI code, most importantly the code in drivers/acpi/main.c, was written with this assumption. Currently, however, CONFIG_PM_SLEEP is also set when CONFIG_XEN_SAVE_RESTORE is set. This causes some compilation warnings to appear in drivers/acpi/main.c if both CONFIG_SUSPEND and CONFIG_HIBERNATION are unset and CONFIG_PM_SLEEP is set (this was impossible before). To fix this problem, redefine CONFIG_ACPI_SLEEP do depend directly on CONFIG_SUSPEND || CONFIG_HIBERNATION, as originally intended, and use it instead of CONFIG_PM_SLEEP in drivers/acpi/main.c, wherever appropriate. Additionally, move the acpi_target_sleep_state definition from under the #ifdef to prevent compilation from failing in some cases. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-12acpi: Make ACPI_TOSHIBA depend on INPUT.David S. Miller
Selecting INPUT_POLLDEV is not sufficient. Signed-off-by: David S. Miller <davem@davemloft.net>