summaryrefslogtreecommitdiffstats
path: root/drivers/acpi/fan.c
AgeCommit message (Collapse)Author
2010-10-15ACPI fan: remove deprecated procfs I/FZhang Rui
Remove deprecated ACPI Fan driver procfs interface. The ACPI fan driver (CONFIG_ACPI_FAN) selects the generic thermal sysfs driver (CONFIG_THERMAL) since 2.6.26, so new sysfs I/F is available at /sys/class/thermal/cooling_devicecX/ Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-29ACPI: fan: Fix more unbalanced code blockLuis Henriques
commit 934231de706d2579fae14f5857fcd8de991009ff fixes an unbalanced CONFIG_ACPI_PROCFS code block during module initialisation. This patch fixes similar issue but for the module exit. Signed-off-by: Luis Henriques <luis.henrix@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-10ACPI: fan: fix unbalanced code blockLiang Li
The code block braced with CONFIG_ACPI_PROCFS is unblanced. When CONFIG_ACPI_PROCFS=n, kernel trace will be produced like: Call Trace: [<c111637d>] ? remove_proc_entry+0x20d/0x290 [<c111637d>] ? remove_proc_entry+0x20d/0x290 [<c103b02c>] warn_slowpath_common+0x6c/0xc0 [<c111637d>] ? remove_proc_entry+0x20d/0x290 [<c103b0c6>] warn_slowpath_fmt+0x26/0x30 [<c111637d>] remove_proc_entry+0x20d/0x290 [<c1116bd7>] ? proc_register+0x117/0x1f0 [<c1116e83>] ? proc_mkdir_mode+0x33/0x50 [<c14f483c>] ? acpi_fan_init+0x0/0x2c [<c14f485f>] acpi_fan_init+0x23/0x2c [<c1001123>] do_one_initcall+0x23/0x180 [<c107dcf7>] ? init_irq_proc+0x67/0x80 [<c14d43bd>] kernel_init+0x13c/0x20e [<c1030e50>] ? schedule_tail+0x20/0x90 [<c1389e06>] ? syscall_exit+0x5/0x16 [<c14d4281>] ? kernel_init+0x0/0x20e [<c14d4281>] ? kernel_init+0x0/0x20e [<c10032f6>] kernel_thread_helper+0x6/0x30 ---[ end trace a7919e7f17c0a725 ]--- Then also bracket later error checking code with ACPI_PROCFS option to avoid mismatch problem. Signed-off-by: Liang Li <liang.li@windriver.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-16ACPI: Remove repeated registered as cooling_device messagesMike Travis
This message shows up for each cpu. Print as debug messages. [ 12.893967] processor ACPI0007:00: registered as cooling_device0 [ 12.907838] processor ACPI0007:01: registered as cooling_device1 Signed-off-by: Mike Travis <travis@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: linux-acpi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28ACPI: Move definition of PREFIX from acpi_bus.h to internal..hLen Brown
Linux/ACPI core files using internal.h all PREFIX "ACPI: ", however, not all ACPI drivers use/want it -- and they should not have to #undef PREFIX to define their own. Add GPL commment to internal.h while we are there. This does not change any actual console output, asside from a whitespace fix. Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05Merge branch 'linus' into releaseLen Brown
Conflicts: arch/x86/kernel/cpu/cpufreq/longhaul.c Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-31proc 2/2: remove struct proc_dir_entry::ownerAlexey Dobriyan
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy as correctly noted at bug #12454. Someone can lookup entry with NULL ->owner, thus not pinning enything, and release it later resulting in module refcount underflow. We can keep ->owner and supply it at registration time like ->proc_fops and ->data. But this leaves ->owner as easy-manipulative field (just one C assignment) and somebody will forget to unpin previous/pin current module when switching ->owner. ->proc_fops is declared as "const" which should give some thoughts. ->read_proc/->write_proc were just fixed to not require ->owner for protection. rmmod'ed directories will be empty and return "." and ".." -- no harm. And directories with tricky enough readdir and lookup shouldn't be modular. We definitely don't want such modular code. Removing ->owner will also make PDE smaller. So, let's nuke it. Kudos to Jeff Layton for reminding about this, let's say, oversight. http://bugzilla.kernel.org/show_bug.cgi?id=12454 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-02-20thermal: use integers rather than strings for thermal valuesMatthew Garrett
The thermal API currently uses strings to pass values to userspace. This makes it difficult to use from within the kernel. Change the interface to use integers and fix up the consumers. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-07ACPI: consolidate ACPI_*_COMPONENT definitions in acpi_drivers.hBjorn Helgaas
Move all the component definitions for drivers to a single shared place, include/acpi/acpi_drivers.h. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22Merge branch 'misc' into testLen Brown
2008-10-22ACPI: replace ACPI_DEBUG_PRINT((ACPI_DB_ERROR, ...) with printkLin Ming
ACPI_DB_ERROR and ACPI_DB_WARN were removed from ACPICA core. So replace ACPI_DEBUG_PRINT((ACPI_DB_ERROR, ...) with printk(KERN_ERR PREFIX ...) and ACPI_DEBUG_PRINT((ACPI_DB_WARN, ...) with printk(KERN_WARNING PREFIX ...) We do not use ACPI_ERROR/ACPI_WARNING since they're not exported, see ------------------------------------------------------------- commit 6468463abd7051fcc29f3ee7c931f9bbbb26f5a4 Author: Len Brown <len.brown@intel.com> Date: Mon Jun 26 23:41:38 2006 -0400 ACPI: un-export ACPI_ERROR() -- use printk(KERN_ERR...) Signed-off-by: Len Brown <len.brown@intel.com> ------------------------------------------------------------- Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-10ACPI: catch calls of acpi_driver_data on pointer of wrong typePavel Machek
Catch attempts to use of acpi_driver_data on pointers of wrong type. akpm: rewritten to use proper C typechecking and remove the "function"-used-as-lvalue thing. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-21driver core: fix a lot of printk usages of bus_idGreg Kroah-Hartman
We have the dev_printk() variants for this kind of thing, use them instead of directly trying to access the bus_id field of struct device. This is done in order to remove bus_id entirely. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-16ACPI: fix acpi fan state set errorYi Yang
Under /proc/acpi, there is a fan control interface, a user can set 0 or 3 to /proc/acpi/fan/*/state, 0 denotes D0 state, 3 denotes D3 state, but in current implementation, a user can set a fan to D1 state by any char excluding '1', '2' and '3'. For example: [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on [root@localhost acpi]# echo "3" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "xxxxx" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on Obviously, such inputs as "" and "xxxxx" are invalid for fan state. This patch fixes this issue, it strictly limits fan state only to accept 0, 1, 2 and 3, any other inputs are invalid. Before applying this patch, the test result is: [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on [root@localhost acpi]# echo "3" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "xxxxx" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on [root@localhost acpi]# echo "3" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "3x" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "-1x" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on [root@localhost acpi]# After applying this patch, the test result is: [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "" > /proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "3" > /proc/acpi/fan/C31B/state [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "xxxxx" > /proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "-1x" > /proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "0" > //proc/acpi/fan/C31B/state [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: on [root@localhost ~]# echo "4" > //proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: on [root@localhost ~]# echo "3" > //proc/acpi/fan/C31B/state [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "0" > //proc/acpi/fan/C31B/state [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: on [root@localhost ~]# echo "3x" > //proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# Signed-off-by: Yi Yang <yi.y.yang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-30Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (179 commits) ACPI: Fix acpi_processor_idle and idle= boot parameters interaction acpi: fix section mismatch warning in pnpacpi intel_menlo: fix build warning ACPI: Cleanup: Remove unneeded, multiple local dummy variables ACPI: video - fix permissions on some proc entries ACPI: video - properly handle errors when registering proc elements ACPI: video - do not store invalid entries in attached_array list ACPI: re-name acpi_pm_ops to acpi_suspend_ops ACER_WMI/ASUS_LAPTOP: fix build bug thinkpad_acpi: fix possible NULL pointer dereference if kstrdup failed ACPI: check a return value correctly in acpi_power_get_context() #if 0 acpi/bay.c:eject_removable_drive() eeepc-laptop: add hwmon fan control eeepc-laptop: add backlight eeepc-laptop: add base driver ACPI: thinkpad-acpi: bump up version to 0.20 ACPI: thinkpad-acpi: fix selects in Kconfig ACPI: thinkpad-acpi: use a private workqueue ACPI: thinkpad-acpi: fluff really minor fix ACPI: thinkpad-acpi: use uppercase for "LED" on user documentation ... Fixed conflicts in drivers/acpi/video.c and drivers/misc/intel_menlow.c manually.
2008-04-29acpi: use non-racy method for proc entries creationDenis V. Lunev
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Add correct ->owner to proc_fops to fix reading/module unloading race. Signed-off-by: Denis V. Lunev <den@openvz.org> Cc: Len Brown <lenb@kernel.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29ACPI: elide a non-zero test on a result that is never 0Julia Lawall
thermal_cooling_device_register used to return NULL if THERMAL is "n". As the ACPI fan, processor and video drivers SELECT the generic thermal in PATCH 01, this is not a problem any more. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-28revert "ACPI: drivers/acpi: elide a non-zero test on a result that is never 0"Ingo Molnar
Revert commit 1192aeb957402b45f311895f124e4ca41206843c ("ACPI: drivers/acpi: elide a non-zero test on a result that is never 0") because it turns out that thermal_cooling_device_register() does actually return NULL if CONFIG_THERMAL is turned off (then the routine turns into a dummy inline routine in the header files that returns NULL unconditionally). This was found with randconfig testing, causing a crash during bootup: initcall 0x78878534 ran for 13 msecs: acpi_button_init+0x0/0x51() Calling initcall 0x78878585: acpi_fan_init+0x0/0x2c() BUG: unable to handle kernel NULL pointer dereference at 00000000 IP: [<782b8ad0>] acpi_fan_add+0x7d/0xfd *pde = 00000000 Oops: 0000 [#1] Modules linked in: Pid: 1, comm: swapper Not tainted (2.6.25-rc7-sched-devel.git-x86-latest.git #14) EIP: 0060:[<782b8ad0>] EFLAGS: 00010246 CPU: 0 EIP is at acpi_fan_add+0x7d/0xfd EAX: b787c718 EBX: b787c400 ECX: b782ceb4 EDX: 00000007 ESI: 00000000 EDI: b787c6f4 EBP: b782cee0 ESP: b782cecc DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 Process swapper (pid: 1, ti=b782c000 task=b7846000 task.ti=b782c000) Stack: b787c459 00000000 b787c400 78790888 b787c60c b782cef8 782b6fb8 ffffffda b787c60c 00000000 78790958 b782cf0c 783005d7 b787c60c 78790958 78790584 b782cf1c 783007f6 b782cf28 00000000 b782cf40 782ffc4a 78790958 b794d558 Call Trace: [<782b6fb8>] ? acpi_device_probe+0x3e/0xdb [<783005d7>] ? driver_probe_device+0x82/0xfc [<783007f6>] ? __driver_attach+0x3a/0x70 [<782ffc4a>] ? bus_for_each_dev+0x3e/0x60 [<7830048c>] ? driver_attach+0x14/0x16 [<783007bc>] ? __driver_attach+0x0/0x70 [<7830006a>] ? bus_add_driver+0x9d/0x1b0 [<783008c3>] ? driver_register+0x47/0xa3 [<7813db00>] ? timespec_to_ktime+0x9/0xc [<782b7331>] ? acpi_bus_register_driver+0x3a/0x3c [<78878592>] ? acpi_fan_init+0xd/0x2c [<78863656>] ? kernel_init+0xac/0x1f9 [<788635aa>] ? kernel_init+0x0/0x1f9 [<78114563>] ? kernel_thread_helper+0x7/0x10 ======================= Code: 6e 78 e8 57 44 e7 ff 58 e9 93 00 00 00 8b 55 f0 8d bb f4 02 00 00 80 4b 2d 10 8b 03 e8 87 cb ff ff 8d 83 18 03 00 00 80 63 2d ef <ff> 35 00 00 00 00 50 68 e8 9c 6e 78 e8 22 44 e7 ff b9 b6 9c 6e EIP: [<782b8ad0>] acpi_fan_add+0x7d/0xfd SS:ESP 0068:b782cecc ---[ end trace 778e504de7e3b1e3 ]--- Kernel panic - not syncing: Attempted to kill init! Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Julia Lawall <julia@diku.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-27ACPI: drivers/acpi: elide a non-zero test on a result that is never 0Julia Lawall
The function thermal_cooling_device_register always returns either a valid pointer or a value made with ERR_PTR, so a test for non-zero on the result will always succeed. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) //<smpl> @a@ expression E, E1; statement S,S1; position p; @@ E = thermal_cooling_device_register(...) ... when != E = E1 if@p (E) S else S1 @n@ position a.p; expression E,E1; statement S,S1; @@ E = NULL ... when != E = E1 if@p (E) S else S1 @depends on !n@ expression E; statement S,S1; position a.p; @@ * if@p (E) S else S1 //</smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-15ACPI fan: extract return values using PTR_ERRThomas Sujith
Need to extract errors using PTR_ERR macro and process accordingly. thermal_cooling_device_register returning NULL means that CONFIG_THERMAL=n and in that case no need to create symbolic links. Signed-off-by: Thomas Sujith <sujith.thomas@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-02ACPI: fan: build fix for CONFIG_ACPI_PROCFS=nLen Brown
drivers/acpi/fan.c:340: error: ‘acpi_fan_dir’ undeclared (first use in this function) Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01ACPI: register ACPI Fan as generic thermal cooling deviceZhang Rui
Register ACPI Fan as thermal cooling device. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Thomas Sujith <sujith.thomas@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23Revert "ACPI: Fan: Drop force_power_state acpi_device option"Len Brown
This reverts commit 93ad7c07ad487b036add8760dabcc35666a550ef. http://bugzilla.kernel.org/show_bug.cgi?id=9798 Signed-off-by: Len Brown <len.brown@intel.com>
2007-10-25ACPI: Fan: Drop force_power_state acpi_device optionAlexey Starikovskiy
force_power_state was used as a workaround for invalid cached power state of the device. We do not cache power state, so no need for workaround. Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2007-10-25ACPI: Fan: fan device does not need own structureAlexey Starikovskiy
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-23ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI ↵Thomas Renninger
drivers modpost is going to use these to create e.g. acpi:ACPI0001 in modules.alias. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12ACPI: delete extra #defines in /drivers/acpi/ driversLen Brown
Cosmetic only. Except in a single case, #define ACPI_*_DRIVER_NAME were invoked 0 or 1 times. Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12ACPI: fix acpi_driver.name usageLen Brown
It was erroneously used as a description rather than a name. ie. turn this: lenb@se7525gp2:/sys> ls bus/acpi/drivers ACPI AC Adapter Driver ACPI Embedded Controller Driver ACPI Power Resource Driver ACPI Battery Driver ACPI Fan Driver ACPI Processor Driver ACPI Button Driver ACPI PCI Interrupt Link Driver ACPI Thermal Zone Driver ACPI container driver ACPI PCI Root Bridge Driver hpet into this: lenb@se7525gp2:~> ls /sys/bus/acpi/drivers ac battery button container ec fan hpet pci_link pci_root power processor thermal Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12ACPI: clean up ACPI_MODULE_NAME() useLen Brown
cosmetic only Make "module name" actually match the file name. Invoke with ';' as leaving it off confuses Lindent and gcc doesn't care. Fix indentation where Lindent did get confused. Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-03Pull sysfs into test branchLen Brown
Conflicts: Documentation/feature-removal-schedule.txt include/acpi/acpi_drivers.h Signed-off-by: Len Brown <len.brown@intel.com>
2006-12-20ACPI: replace kmalloc+memset with kzallocBurman Yan
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-12-15ACPI: add ACPI bus_type for driver modelPatrick Mochel
Add ACPI bus_type for Linux driver model. 1. .shutdown method is added into acpi_driver.ops needed by bus_type operations. 2. remove useless parameter 'int state' in .resume method. 3. change parameter 'int state' to 'pm_message_t state' in .suspend method. Note: The new .uevent method mark ACPI drivers by PNPID instead of by name. Udev script needs to look for "HWID=" or "COMPTID=" to load ACPI drivers as a result. Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: Remove unnecessary from/to-void* and to-void casts in drivers/acpiJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-10ACPI: add 'const' to several ACPI file_operationsArjan van de Ven
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30ACPI: fan: Remove unneeded acpi_handle from driver.Patrick Mochel
Signed-off-by: Patrick Mochel <mochel@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30ACPI: fan: Use acpi_device's handle instead of driver'sPatrick Mochel
Signed-off-by: Patrick Mochel <mochel@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30ACPI: fan: add struct acpi_device to struct acpi_fan.Patrick Mochel
Signed-off-by: Patrick Mochel <mochel@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-27ACPI: delete tracing macros from drivers/acpi/*.cPatrick Mochel
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-27ACPI: un-export ACPI_ERROR() -- use printk(KERN_ERR...)Len Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-26ACPI: Enable ACPI error messages w/o CONFIG_ACPI_DEBUGThomas Renninger
Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2006-05-15ACPI: create acpi_fan_suspend()/acpi_fan_resume()Konstantin Karasyov
http://bugzilla.kernel.org/show_bug.cgi?id=5000 Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-05[ACPI] Lindent all ACPI filesLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-05[ACPI] whitespacePavel Machek
Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-15 13:30:21 +0000