summaryrefslogtreecommitdiffstats
path: root/drivers/acpi/sleep.c
AgeCommit message (Collapse)Author
2014-03-13ACPI / sleep: Add extra checks for HW Reduced ACPI mode sleep statesRafael J. Wysocki
If the HW Reduced ACPI mode bit is set in the FADT, ACPICA uses the optional sleep control and sleep status registers for making the system enter sleep states (including S5), so it is not possible to use system sleep states or power it off using ACPI if the HW Reduced ACPI mode bit is set and those registers are not available. For this reason, add a new function, acpi_sleep_state_supported(), checking if the HW Reduced ACPI mode bit is set and whether or not system sleep states are usable in that case in addition to checking the return value of acpi_get_sleep_type_data() and make the ACPI sleep setup routines use that function to check the availability of system sleep states. Among other things, this prevents the kernel from attempting to use ACPI for powering off HW Reduced ACPI systems without the sleep control and sleep status registers, because ACPI power off doesn't have a chance to work on them. That allows alternative power off mechanisms that may actually work to be used on those systems. The affected machines include Dell Venue 8 Pro, Asus T100TA, Haswell Desktop SDP and Ivy Bridge EP Demo depot. References: https://bugzilla.kernel.org/show_bug.cgi?id=70931 Reported-by: Adam Williamson <awilliam@redhat.com> Tested-by: Aubrey Li <aubrey.li@linux.intel.com> Cc: 3.4+ <stable@vger.kernel.org> # 3.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-09Revert "ACPI / sleep: pm_power_off needs more sanity checks to be installed"Rafael J. Wysocki
Revert commit 3130497f5bab ("ACPI / sleep: pm_power_off needs more sanity checks to be installed") that breaks power ACPI power off on a lot of systems, because it checks wrong registers. Fixes: 3130497f5bab ("ACPI / sleep: pm_power_off needs more sanity checks to be installed") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-03ACPI / sleep: pm_power_off needs more sanity checks to be installedLi, Aubrey
Sleep control and status registers need santity checks as well before ACPI installs acpi_power_off to pm_power_off hook. The checking code in acpi_enter_sleep_state() is too late, we should not allow a not-working pm_power_off function to be hooked up. Signed-off-by: Aubrey Li <aubrey.li@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-12Merge branches 'acpi-gpe', 'acpi-video', 'acpi-thermal', 'acpi-processor', ↵Rafael J. Wysocki
'acpi-sleep' * acpi-gpe: ACPI / EC: disable GPE before removing GPE handler ACPI / Button: Fix enabling button GPEs twice * acpi-video: ACPI: Blacklist Win8 OSI for some HP laptop 2013 models ACPI / video: Fix typo in video_detect.c * acpi-thermal: ACPI / thermal: remove const from thermal_zone_device_ops declaration * acpi-processor: ACPI / scan: bail out early if failed to parse APIC ID for CPU * acpi-sleep: ACPI / sleep: remove panic in case hardware has changed after S4
2014-01-12Merge branch 'acpi-cleanup'Rafael J. Wysocki
* acpi-cleanup: (22 commits) ACPI / tables: Return proper error codes from acpi_table_parse() and fix comment. ACPI / tables: Check if id is NULL in acpi_table_parse() ACPI / proc: Include appropriate header file in proc.c ACPI / EC: Remove unused functions and add prototype declaration in internal.h ACPI / dock: Include appropriate header file in dock.c ACPI / PCI: Include appropriate header file in pci_link.c ACPI / PCI: Include appropriate header file in pci_slot.c ACPI / EC: Mark the function acpi_ec_add_debugfs() as static in ec_sys.c ACPI / NVS: Include appropriate header file in nvs.c ACPI / OSL: Mark the function acpi_table_checksum() as static ACPI / processor: initialize a variable to silence compiler warning ACPI / processor: use ACPI_COMPANION() to get ACPI device ACPI: correct minor typos ACPI / sleep: Drop redundant acpi_disabled check ACPI / dock: Drop redundant acpi_disabled check ACPI / table: Replace '1' with specific error return values ACPI: remove trailing whitespace ACPI / IBFT: Fix incorrect <acpi/acpi.h> inclusion in iSCSI boot firmware module ACPI / i915: Fix incorrect <acpi/acpi.h> inclusions via <linux/acpi_io.h> SFI / ACPI: Fix warnings reported during builds with W=1 ... Conflicts: drivers/acpi/nvs.c drivers/hwmon/asus_atk0110.c
2014-01-11ACPI / sleep: remove panic in case hardware has changed after S4Oliver Neukum
Some BIOSes change hardware based on the state of a laptop's lid. If the lid is closed, the touchpad is disabled and the checksum changes. Windows 8 no longer aborts resume if the checksum has changed. Signed-off-by: Oliver Neukum <oneukum@suse.de> [rjw: Use pr_crit() for the message and don't break the string] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-07ACPI / sleep: Drop redundant acpi_disabled checkHanjun Guo
acpi_sleep_init() is only called from acpi_bus_init() and the code logic shows that it doesn't need to check acpi_disabled: acpi_init(); if (acpi_disabled) return; acpi_bus_init(); acpi_sleep_init(); if (acpi_disabled) return 0; Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> [rjw: Subject and changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-07ACPI: Clean up inclusions of ACPI header filesLv Zheng
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-21ACPI / sleep: clean up compiler warning about uninitialized fieldAl Stone
Initialize pwr_btn_status as disabled which (a) makes sure it is in a proper state to start, and (b) cleans up a compiler warning about an uninitialized variable. Signed-off-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-27Merge branch 'acpi-assorted'Rafael J. Wysocki
* acpi-assorted: ACPI / osl: Kill macro INVALID_TABLE(). earlycpio.c: Fix the confusing comment of find_cpio_data(). ACPI / x86: Print Hot-Pluggable Field in SRAT. ACPI / thermal: Use THERMAL_TRIPS_NONE macro to replace number ACPI / thermal: Remove unused macros in the driver/acpi/thermal.c ACPI / thermal: Remove the unused lock of struct acpi_thermal ACPI / osl: Fix osi_setup_entries[] __initdata attribute location ACPI / numa: Fix __init attribute location in slit_valid() ACPI / dock: Fix __init attribute location in find_dock_and_bay() ACPI / Sleep: Fix incorrect placement of __initdata ACPI / processor: Fix incorrect placement of __initdata ACPI / EC: Fix incorrect placement of __initdata ACPI / scan: Drop unnecessary label from acpi_create_platform_device() ACPI: Move acpi_bus_get_device() from bus.c to scan.c ACPI / scan: Allow platform device creation without any IO resources ACPI: Cleanup sparse warning on acpi_os_initialize1() platform / thinkpad: Remove deprecated hotkey_report_mode parameter ACPI: Remove the old /proc/acpi/event interface
2013-08-21ACPI / PM: Hold acpi_scan_lock over system PM transitionsRafael J. Wysocki
Bad things happen if ACPI hotplug events are handled during system PM transitions, especially if devices are removed as a result. To prevent those bad things from happening, acquire acpi_scan_lock when a PM transition is started and release it when that transition is complete or has been aborted. This fixes resume lockup on my test-bed Acer Aspire S5 that happens when Thunderbolt devices are disconnected from the machine while suspended. Also fixes the analogous problem for Mika Westerberg on an Intel DZ77RE-75K board. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-08-07ACPI / Sleep: Fix incorrect placement of __initdataSachin Kamat
__initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-15ACPI: introduce helper function acpi_execute_simple_method()Jiang Liu
Introduce helper function acpi_execute_simple_method() and use it in a number of places to simplify code. [rjw: Changelog] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-19x86 / ACPI / sleep: Provide registration for acpi_suspend_lowlevel.Konrad Rzeszutek Wilk
Which by default will be x86_acpi_suspend_lowlevel. This registration allows us to register another callback if there is a need to use another platform specific callback. Signed-off-by: Liang Tang <liang.tang@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Ben Guthro <benjamin.guthro@citrix.com> Acked-by: "H. Peter Anvin" <hpa@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-27ACPI / PM: fix suspend and resume on Sony Vaio VGN-FW21MFabio Valentini
Add Sony Vaio VGN-FW21M to the device blacklist in drivers/acpi/sleep.c. Fixes suspend/resume on this device (device no longer reboots instead of resuming). References: https://bugzilla.kernel.org/show_bug.cgi?id=55001 Signed-off-by: Fabio Valentini <fafatheone@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-04ACPI / Sleep: Avoid interleaved message on errorsJoe Perches
Got this dmesg log on an Acer Aspire 725. [ 0.256351] ACPI: (supports S0ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568) [ 0.256373] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568) [ 0.256391] S3 S4 S5) Avoid this interleaving error messages. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-15Merge branch 'acpi-assorted'Rafael J. Wysocki
* acpi-assorted: ACPI: Add DMI entry for Sony VGN-FW41E_H ACPI: fix obsolete comment in custom_method.c ACPI / thermal: Use mode to enable/disable kernel thermal processing ACPI thermal: remove unnecessary newline from exception message ACPI sysfs: remove unnecessary newline from exception ACPI video: remove unnecessary newline from error messages ACPI: SRAT: report non-volatile memory in debug ACPI: Rework acpi_get_child() to be more efficient
2013-02-06ACPI: Add DMI entry for Sony VGN-FW41E_HJoseph Salisbury
This patch adds a quirk to allow the Sony VGN-FW41E_H to suspend/resume properly. References: http://bugs.launchpad.net/bugs/1113547 Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Cc: All <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-19ACPI / PM: Consolidate suspend-specific and hibernate-specific codeRafael J. Wysocki
Move some suspend-specific and hibernate-specific code from acpi_sleep_init() into separate functions to get rid of explicit #ifdefs in acpi_sleep_init(). Use pr_info() to start and pr_cont() to continue printing the supported ACPI sleep states line. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-17ACPI: Drop power resources driverRafael J. Wysocki
The ACPI power resources driver is not very useful, because the only thing it really does is to restore the state of the power resources that were "on" before system suspend or hibernation, but that may be achieved in a different way. Drop the ACPI power resources driver entirely and add acpi_resume_power_resources() that will walk the list of all registered power resources during system resume and turn on the ones that were "on" before the preceding system suspend or hibernation. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-12-04Merge branch 'acpi-general'Rafael J. Wysocki
* acpi-general: ACPI / PNP: Do not crash due to stale pointer use during system resume ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklist ACPI: do acpisleep dmi check when CONFIG_ACPI_SLEEP is set
2012-11-30ACPI: do acpisleep dmi check when CONFIG_ACPI_SLEEP is setZhang Rui
The current acpisleep DMI checks only run when CONFIG_SUSPEND is set. And this may break hibernation on some platforms when CONFIG_SUSPEND is cleared. Move acpisleep DMI check into #ifdef CONFIG_ACPI_SLEEP instead. [rjw: Added acpi_sleep_dmi_check() and rebased on top of earlier patches adding entries to acpisleep_dmi_table[].] References: https://bugzilla.kernel.org/show_bug.cgi?id=45921 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-29Merge branch 'acpi-general'Rafael J. Wysocki
* acpi-general: (38 commits) ACPI / thermal: _TMP and _CRT/_HOT/_PSV/_ACx dependency fix ACPI: drop unnecessary local variable from acpi_system_write_wakeup_device() ACPI: Fix logging when no pci_irq is allocated ACPI: Update Dock hotplug error messages ACPI: Update Container hotplug error messages ACPI: Update Memory hotplug error messages ACPI: Update CPU hotplug error messages ACPI: Add acpi_handle_<level>() interfaces ACPI: remove use of __devexit ACPI / PM: Add Sony Vaio VPCEB1S1E to nonvs blacklist. ACPI / battery: Correct battery capacity values on Thinkpads Revert "ACPI / x86: Add quirk for "CheckPoint P-20-00" to not use bridge _CRS_ info" ACPI: create _SUN sysfs file ACPI / memhotplug: bind the memory device when the driver is being loaded ACPI / memhotplug: don't allow to eject the memory device if it is being used ACPI / memhotplug: free memory device if acpi_memory_enable_device() failed ACPI / memhotplug: fix memory leak when memory device is unbound from acpi_memhotplug ACPI / memhotplug: deal with eject request in hotplug queue ACPI / memory-hotplug: add memory offline code to acpi_memory_device_remove() ACPI / memory-hotplug: call acpi_bus_trim() to remove memory device ... Conflicts: include/linux/acpi.h (two additions at the end of the same file)
2012-11-21ACPI / PM: Add Sony Vaio VPCEB1S1E to nonvs blacklist.Lan Tianyu
Sony Vaio VPCEB1S1E does not resume correctly without acpi_sleep=nonvs, so add it to the ACPI sleep blacklist. References: https://bugzilla.kernel.org/show_bug.cgi?id=48781 Reported-by: Sébastien Wilmet <swilmet@gnome.org> Cc: <stable@vger.kernel.org> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPI / Sleep: add acpi_sleep=nonvs_s3 parameterKristen Carlson Accardi
The ACPI specificiation would like us to save NVS at hibernation time, but makes no mention of saving NVS over S3. Not all versions of Windows do this either, and it is clear that not all machines need NVS saved/restored over S3. Allow the user to improve their suspend/resume time by disabling the NVS save/restore at S3 time, but continue to do the NVS save/restore for S4 as specified. Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPI / PM: Move device PM functions related to sleep statesRafael J. Wysocki
Introduce helper function returning the target sleep state of the system and use it to move the remaining device power management functions from sleep.c to device_pm.c. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPI / PM: Split device wakeup management routinesRafael J. Wysocki
Two device wakeup management routines in device_pm.c and sleep.c, acpi_pm_device_run_wake() and acpi_pm_device_sleep_wake(), take a device pointer argument and use it to obtain the ACPI handle of the corresponding ACPI namespace node. That handle is then used to get the address of the struct acpi_device object corresponding to the struct device passed as the argument. Unfortunately, that last operation may be costly, because it involves taking the global ACPI namespace mutex, so it shouldn't be carried out too often. However, the callers of those routines usually call them in a row with acpi_pm_device_sleep_state() which also takes that mutex for the same reason, so it would be more efficient if they ran acpi_bus_get_device() themselves to obtain a pointer to the struct acpi_device object in question and then passed that pointer to the appropriate PM routines. To make that possible, split each of the PM routines mentioned above in two parts, one taking a struct acpi_device pointer argument and the other implementing the current interface for compatibility. Additionally, change acpi_pm_device_run_wake() to actually return an error code if there is an error while setting up runtime remote wakeup for the device. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPI / PM: Move runtime remote wakeup setup routine to device_pm.cRafael J. Wysocki
The ACPI function for setting up devices to do runtime remote wakeup is now located in drivers/acpi/sleep.c, but drivers/acpi/device_pm.c is a more logical place for it, so move it there. No functional changes should result from this modification. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPI / PM: Move device power state selection routine to device_pm.cRafael J. Wysocki
The ACPI function for choosing device power state is now located in drivers/acpi/sleep.c, but drivers/acpi/device_pm.c is a more logical place for it, so move it there. However, instead of moving the function entirely, move its core only under a different name and with a different list of arguments, so that it is more flexible, and leave a wrapper around it in the original location. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15ACPI / PM: Fix device PM kernedoc comments and #ifdefsRafael J. Wysocki
The kerneldoc comments for acpi_pm_device_sleep_state(), acpi_pm_device_run_wake(), and acpi_pm_device_sleep_wake() are outdated or otherwise inaccurate and/or don't follow the common kerneldoc patterns, so fix them. Additionally, notice that acpi_pm_device_run_wake() should be under CONFIG_PM_RUNTIME rather than under CONFIG_PM_SLEEP, so fix that too. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-10-24PM / ACPI: Take device PM QoS flags into accountRafael J. Wysocki
Make ACPI power management routines and PCI power management routines depending on ACPI take device PM QoS flags into account when deciding what power state to put the device into. In particular, after this change acpi_pm_device_sleep_state() will not return ACPI_STATE_D3_COLD as the deepest available low-power state if PM_QOS_FLAG_NO_POWER_OFF is requested for the device and it will not require remote wakeup to work for the device in the returned low-power state if there is at least one PM QoS flags request for the device, but PM_QOS_FLAG_REMOTE_WAKEUP is not requested for it. Accordingly, acpi_pci_set_power_state() will refuse to put the device into D3cold if PM_QOS_FLAG_NO_POWER_OFF is requested for it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Huang Ying <ying.huang@intel.com>
2012-08-03Merge branches 'delete-gts-bfs', 'misc', 'novell-bugzilla-757888-numa' and ↵Len Brown
'osc-pcie' into base
2012-07-30ACPI: delete _GTS/_BFS supportLen Brown
_GTS and _BFS were added to the suspend/resume flow in the ACPI 2.0 specification. Linux dutifully implemented _GTS and _BFS. We discovered that it was rarely seen in systems in the field. Further, some of those systems had AML so bogus that it could never work -- proof that no other operating system supports _GTS and _BFS. So we made _GTS and _BFS optional via modparam, and disabled them by default. But we've had to complicate some code to keep this support in the kernel, as these methods are defined to be evaluated very close to sleep entry and exit. Indeed, no other AML is ever evaluated with interrupts off. We have submitted a proposal for _GTS and _BFS to be officially removed from the ACPI specification on the next revision. Here we remove it from Linux. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-07-26ACPI / PM: Fix build warning in sleep.c for CONFIG_ACPI_SLEEP unsetRafael J. Wysocki
If CONFIG_ACPI_SLEEP is unset, the compiler complains that pwr_btn_event_pending is defined but not used. To silence the warning, move the definition of pwr_btn_event_pending under an appropriate #ifdef. Reported-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Len Brown <len.brown@intel.com>
2012-07-26Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & power management update from Len Brown: "Re-write of the turbostat tool. lower overhead was necessary for measuring very large system when they are very idle. IVB support in intel_idle It's what I run on my IVB, others should be able to also:-) ACPICA core update We have found some bugs due to divergence between Linux and the upstream ACPICA base. Most of these patches are to reduce that divergence to reduce the risk of future bugs. Some cpuidle updates, mostly for non-Intel More will be coming, as they depend on this part. Some thermal management changes needed by non-ACPI systems. Some _OST (OS Status Indication) updates for hot ACPI hot-plug." * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (51 commits) Thermal: Documentation update Thermal: Add Hysteresis attributes Thermal: Make Thermal trip points writeable ACPI/AC: prevent OOPS on some boxes due to missing check power_supply_register() return value check tools/power: turbostat: fix large c1% issue tools/power: turbostat v2 - re-write for efficiency ACPICA: Update to version 20120711 ACPICA: AcpiSrc: Fix some translation issues for Linux conversion ACPICA: Update header files copyrights to 2012 ACPICA: Add new ACPI table load/unload external interfaces ACPICA: Split file: tbxface.c -> tbxfload.c ACPICA: Add PCC address space to space ID decode function ACPICA: Fix some comment fields ACPICA: Table manager: deploy new firmware error/warning interfaces ACPICA: Add new interfaces for BIOS(firmware) errors and warnings ACPICA: Split exception code utilities to a new file, utexcep.c ACPI: acpi_pad: tune round_robin_time ACPICA: Update to version 20120620 ACPICA: Add support for implicit notify on multiple devices ACPICA: Update comments; no functional change ...
2012-07-26Merge branches 'acpi_pad', 'acpica', 'apei-bugzilla-43282', 'battery', ↵Len Brown
'cpuidle-coupled', 'cpuidle-tweaks', 'intel_idle-ivb', 'ost', 'red-hat-bz-772730', 'thermal', 'thermal-spear' and 'turbostat-v2' into release
2012-07-25Merge branch 'master' [vanilla Linus master] into libata-dev.git/upstreamJeff Garzik
Two bits were appended to the end of the bitfield list in struct scsi_device. Resolve that conflict by including both bits. Conflicts: include/scsi/scsi_device.h
2012-06-29libata-acpi: add ata port runtime D3Cold supportLin Ming
ATA port may support runtime D3Cold state, for example, Zero-power ODD case. This patch adds wakeup notifier and enable/disable run_wake during supend/resume. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-06-23ACPI/PM: specify lowest allowed state for device sleep stateHuang Ying
Lower device sleep state can save more power, but has more exit latency too. Sometimes, to satisfy some power QoS and other requirement, we need to constrain the lowest device sleep state. In this patch, a parameter to specify lowest allowed state for acpi_pm_device_sleep_state is added. So that the caller can enforce the constraint via the parameter. This is needed by PCIe D3cold support, where the lowest power state allowed may be D3_HOT instead of default D3_COLD. CC: Len Brown <lenb@kernel.org> CC: linux-acpi@vger.kernel.org Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-04Merge branches 'bugfix-battery', 'bugfix-misc', 'bugfix-rafael', ↵Len Brown
'bugfix-turbostat', 'bugfix-video' and 'workaround-pss' into release bug fixes Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-03Merge branch 'pm-acpi' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull some left-over PM patches from Rafael J. Wysocki. * 'pm-acpi' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PM: Make acpi_pm_device_sleep_state() follow the specification ACPI / PM: Make __acpi_bus_get_power() cover D3cold correctly ACPI / PM: Fix error messages in drivers/acpi/bus.c rtc-cmos / PM: report wakeup event on ACPI RTC alarm ACPI / PM: Generate wakeup events on fixed power button
2012-06-01ACPICA: Remove argument of acpi_os_wait_events_completeLin Ming
Remove the unused argument of acpi_os_wait_events_complete. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-05-30x86, realmode: Unbreak the ia64 build of drivers/acpi/sleep.cH. Peter Anvin
Revert usage of acpi_wakeup_address and move definition to x86 architecture code in order to make compilation work in ia64. [jsakkine: tested compilation in ia64/x86-64 and added proper commit message] Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Originally-by: H. Peter Anvin <hpa@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com> Link: http://lkml.kernel.org/r/1338370421-27735-1-git-send-email-jarkko.sakkinen@intel.com Cc: Tony Luck <tony.luck@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-05-29Merge branch 'x86-trampoline-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 trampoline rework from H. Peter Anvin: "This code reworks all the "trampoline"/"realmode" code (various bits that need to live in the first megabyte of memory, most but not all of which runs in real mode at some point) in the kernel into a single object. The main reason for doing this is that it eliminates the last place in the kernel where we needed pages to be mapped RWX. This code separates all that code into proper R/RW/RX pages." Fix up conflicts in arch/x86/kernel/Makefile (mca removed next to reboot code), and arch/x86/kernel/reboot.c (reboot code moved around in one branch, modified in this one), and arch/x86/tools/relocs.c (mostly same code came in earlier due to working around the ld bugs just before the 3.4 release). Also remove stale x86-relocs entry from scripts/.gitignore as per Peter Anvin. * commit '61f5446169046c217a5479517edac3a890c3bee7': (36 commits) x86, realmode: Move end signature into header.S x86, relocs: When printing an error, say relative or absolute x86, relocs: More relocations which may end up as absolute x86, relocs: Workaround for binutils 2.22.52.0.1 section bug xen-acpi-processor: Add missing #include <xen/xen.h> acpi, bgrd: Add missing <linux/io.h> to drivers/acpi/bgrt.c x86, realmode: Change EFER to a single u64 field x86, realmode: Move kernel/realmode.c to realmode/init.c x86, realmode: Move not-common bits out of trampoline_common.S x86, realmode: Mask out EFER.LMA when saving trampoline EFER x86, realmode: Fix no cache bits test in reboot_32.S x86, realmode: Make sure all generated files are listed in targets x86, realmode: build fix: remove duplicate build x86, realmode: read cr4 and EFER from kernel for 64-bit trampoline x86, realmode: fixes compilation issue in tboot.c x86, realmode: move relocs from scripts/ to arch/x86/tools x86, realmode: header for trampoline code x86, realmode: flattened rm hierachy x86, realmode: don't copy real_mode_header x86, realmode: fix 64-bit wakeup sequence ...
2012-05-29ACPI / PM: Make acpi_pm_device_sleep_state() follow the specificationRafael J. Wysocki
The comparison between the system sleep state being entered and the lowest system sleep state the given device may wake up from in acpi_pm_device_sleep_state() is reversed, because the specification (ACPI 5.0) says that for wakeup to work: "The sleeping state being entered must be less than or equal to the power state declared in element 1 of the _PRW object." In other words, the state returned by _PRW is the deepest (lowest-power) system sleep state the device is capable of waking up the system from. Moreover, acpi_pm_device_sleep_state() also should check if the wakeup capability is supported through ACPI, because in principle it may be done via native PCIe PME, for example, in which case _SxW should not be evaluated. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-29ACPI / PM: Generate wakeup events on fixed power buttonDaniel Drake
When the system is woken up by the ACPI fixed power button, currently there is no way of userspace becoming aware that the power button was pressed. OLPC would like to know this, so that we can respond appropriately. For example, if the system was woken up by a network packet, we know we can go back to sleep very quickly. But if the user explicitly woke the system with the power button, we're going to want to stay awake for a while. The wakeup count mechanism seems like a good fit for communicating this. Mark the fixed power button as wakeup-enabled, and increment its wakeup counter when the system is woken with the power button. (The wakeup counter is also incremented when the power button is pressed during system operation; this is already handled by an existing acpi-button codepath). Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-08x86, realmode: don't copy real_mode_headerJarkko Sakkinen
Replaced copying of real_mode_header with a pointer to beginning of RM memory. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com> Link: http://lkml.kernel.org/r/1336501366-28617-19-git-send-email-jarkko.sakkinen@intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-05-08x86, realmode: Move ACPI wakeup to unified realmode codeJarkko Sakkinen
Migrated ACPI wakeup code to the real-mode blob. Code existing in .x86_trampoline can be completely removed. Static descriptor table in wakeup_asm.S is courtesy of H. Peter Anvin. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com> Link: http://lkml.kernel.org/r/1336501366-28617-7-git-send-email-jarkko.sakkinen@intel.com Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <len.brown@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-05-08acpi: use KERN_CONT in printk() continuation linesKay Sievers
Cc: Len Brown <lenb@kernel.org> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-23ACPI: Convert wake_sleep_flags to a value instead of functionKonrad Rzeszutek Wilk
With commit a2ef5c4fd44ce3922435139393b89f2cce47f576 "ACPI: Move module parameter gts and bfs to sleep.c" the wake_sleep_flags is required when calling acpi_enter_sleep_state, which means that if there are functions outside the sleep.c code they can't get the wake_sleep_flags values. This converts the function in to a exported value and converts the module config operands to a function. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Lin Ming <ming.m.lin@intel.com> [v2: Parameters can be turned on/off dynamically] [v3: unsigned char -> u8] [v4: val -> kp->arg] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Link: http://lkml.kernel.org/r/1335150198-21899-2-git-send-email-konrad.wilk@oracle.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>