summaryrefslogtreecommitdiffstats
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2013-03-24ACPI: Remove acpi_device dependency in acpi_device_set_id()Toshi Kani
This patch updates the internal operations of acpi_device_set_id() to setup acpi_device_pnp without using acpi_device. There is no functional change to acpi_device_set_id() in this patch. acpi_pnp_type is added to acpi_device_pnp, so that PNPID type is self-contained within acpi_device_pnp. acpi_add_id(), acpi_bay_match(), acpi_dock_match(), acpi_ibm_smbus_match() and acpi_is_video_device() are changed to take acpi_handle as an argument, instead of acpi_device. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-24ACPI: replace kmalloc+memcpy with kmemdupAndrei Epure
Replace the combination of kmalloc() and memcpy() in acpi_run_osc() with a single call to kmemdup(). [rjw: Changelog] Signed-off-by: Andrei Epure <epure.andrei@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-24ACPI video: ignore BIOS backlight value for HP dm4Gustavo Maciel Dias Vieira
On a HP Pavilion dm4 laptop the BIOS sets minimum backlight on boot, completely dimming the screen. Ignore this initial value for this machine. Signed-off-by: Gustavo Maciel Dias Vieira <gustavo@sagui.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-24ACPI: Set length even for TYPE_END_TAG acpi resourceYinghai Lu
Found with a network device in QEMU/KVM guest not working anymore. Bisected to commit c13085e5 ACPICA: Resource Mgr: Prevent infinite loops in resource walks That commit will check acpi_resource length strictly which causes acpi_set_current_resources to return failure and IRQ for PCI devices is not set properly. Set length for all those TYPE_END_TAG acpi_resources. [rjw: Changelog] Bisected-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-21ACPI / LPSS: Add support for exposing LTR registers to user spaceRafael J. Wysocki
Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have registers providing access to LTR (Latency Tolerance Reporting) functionality that allows software to monitor and possibly influence the aggressiveness of the platform's active-state power management. For each LPSS device, there are two modes of operation related to LTR, the auto mode and the software mode. In the auto mode the LTR is set up by the platform firmware and managed by hardware. Software can only read the LTR register values to monitor the platform's behavior. In the software mode it is possible to use LTR to control the extent to which the platform will use its built-in power management features. This changeset adds support for reading the LPSS devices' LTR registers and exposing their values to user space for monitoring and diagnostics purposes. It re-uses the MMIO mappings created to access the LPSS devices' clock registers for reading the values of the LTR registers and exposes them to user space through sysfs device attributes. Namely, a new atrribute group, lpss_ltr, is created for each LPSS device. It contains three new attributes: ltr_mode, auto_ltr, sw_ltr. The value of the ltr_mode attribute reflects the LTR mode being used at the moment (software vs auto) and the other two contain the actual register values (raw) whose meaning depends on the LTR mode. All of these attributes are read-only. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-21ACPI / scan: Add special handler for Intel Lynxpoint LPSS devicesRafael J. Wysocki
Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-19ACPI / hotplug: Make acpi_hotplug_profile_ktype staticRafael J. Wysocki
The acpi_hotplug_profile_ktype object should be static, so make that be the case. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12Merge tag 'stable/for-linus-3.9-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: - Compile warnings and errors (one on x86, two on ARM) - WARNING in xen-pciback - Use the acpi_processor_get_performance_info instead of the 'register' version * tag 'stable/for-linus-3.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/acpi: remove redundant acpi/acpi_drivers.h include xen: arm: mandate EABI and use generic atomic operations. acpi: Export the acpi_processor_get_performance_info xen/pciback: Don't disable a PCI device that is already disabled.
2013-03-12ACPICA: Object repair: Allow 0-length packages for variable-length packagesBob Moore
For the predefined names that return fully variable-length packages, allow a zero-length package with no warning, since it is technically a legal construct (and BIOS writers use it.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12ACPICA: Disassembler: Add warnings for unresolved control methodsBob Moore
Flags the case where external control methods are unresolved, meaning that the disassembler had no idea how many arguments to parse for the method invocation. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12ACPICA: Return object repair: Add resource template repairsLv Zheng
Fixes several possible problems with resource templates returned by _CRS/_PRS/_DMA predefined names. Lv Zheng. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12ACPICA: Return object repair: Add string-to-unicode conversionLv Zheng
Used for the _STR and _MLS predefined names. Lv Zheng. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12ACPICA: Split object conversion functions to a new fileBob Moore
New file, nsconvert.c, for return object conversion functions. Created in preparation for new conversion functions forthcoming. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12ACPICA: Add mechanism for early object repairs on a per-name basisBob Moore
Adds the framework to allow object repairs very early in the return object analysis. Enables repairs like string->unicode, etc. Bob Moore, Lv Zheng. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12ACPICA: Add exception descriptions to exception info tableBob Moore
Descriptions to be compiled/used by the acpihelp utility only. Not compiled for the kernel ACPICA code. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12ACPICA: Regression fix: reinstate safe exit macrosBob Moore
Removal caused a regression on at least FreeBSD. This fix reinstates the macros. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12ACPICA: Update for ACPI 5 hardware-reduced featureBob Moore
Ensure that AcpiEnable and AcpiDisable work properly when the hardware-reduced flag is set in the FADT. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12ACPICA: Add parens within macros around parameter namesBob Moore
Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12ACPICA: Add macros to access pointer to next object in the descriptor listJung-uk Kim
Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12ACPICA: Update error/debug messages for fixed eventsBob Moore
Add the actual fixed event name to all messages for clarity. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12ACPICA: Fix a long-standing bug in local cacheJung-uk Kim
Since 20060317, the pointer to next object is the first element in its common header. Remove bogus LinkOffset from ACPI_MEMORY_LIST and directly use NextObject. Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12ACPICA: Fix a couple warnings detected on FreeBSD buildJung-uk Kim
This fixes a global and a pointer cast. Jung-uk Kim. Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-12ACPICA: Resource Mgr: Prevent infinite loops in resource walksBob Moore
Add checks for zero-length resource descriptors in all code that loops through a resource descriptor list. This prevents possible infinite loops because the length is used to increment the traveral pointer and detect the end-of-descriptor. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-06acpi: Export the acpi_processor_get_performance_infoKonrad Rzeszutek Wilk
The git commit d5aaffa9dd531c978c6f3fea06a2972653bd7fc8 (cpufreq: handle cpufreq being disabled for all exported function) tightens the cpufreq API by returning errors when disable_cpufreq() had been called. The problem we are hitting is that the module xen-acpi-processor which uses the ACPI's functions: acpi_processor_register_performance, acpi_processor_preregister_performance, and acpi_processor_notify_smm fails at acpi_processor_register_performance with -22. Note that earlier during bootup in arch/x86/xen/setup.c there is also an call to cpufreq's API: disable_cpufreq(). This is b/c we want the Linux kernel to parse the ACPI data, but leave the cpufreq decisions to the hypervisor. In v3.9 all the checks that d5aaffa9dd531c978c6f3fea06a2972653bd7fc8 added are now hit and the calls to cpufreq_register_notifier will now fail. This means that acpi_processor_ppc_init ends up printing: "Warning: Processor Platform Limit not supported" and the acpi_processor_ppc_status is not set. The repercussions of that is that the call to acpi_processor_register_performance fails right away at: if (!(acpi_processor_ppc_status & PPC_REGISTERED)) and we don't progress any further on parsing and extracting the _P* objects. The only reason the Xen code called that function was b/c it was exported and the only way to gather the P-states. But we can also just make acpi_processor_get_performance_info be exported and not use acpi_processor_register_performance. This patch does so. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-04ACPI / scan: Make memory hotplug driver use struct acpi_scan_handlerRafael J. Wysocki
Make the ACPI memory hotplug driver use struct acpi_scan_handler for representing the object used to set up ACPI memory hotplug functionality and to remove hotplug memory ranges and data structures used by the driver before unregistering ACPI device nodes representing memory. Register the new struct acpi_scan_handler object with the help of acpi_scan_add_handler_with_hotplug() to allow user space to manipulate the attributes of the memory hotplug profile. This results in a significant reduction of the drvier's code size and removes some ACPI hotplug code duplication. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Tested-by: Toshi Kani <toshi.kani@hp.com>
2013-03-04ACPI / container: Use hotplug profile user space interfaceRafael J. Wysocki
Make the ACPI container driver register its ACPI scan handler object using acpi_scan_add_handler_with_hotplug() to allow user space to manipulate its hotplug profile attributes. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Tested-by: Toshi Kani <toshi.kani@hp.com>
2013-03-04ACPI / hotplug: Introduce user space interface for hotplug profilesRafael J. Wysocki
Introduce user space interface for manipulating hotplug profiles associated with ACPI scan handlers. The interface consists of sysfs directories under /sys/firmware/acpi/hotplug/, one for each hotplug profile, containing an attribute allowing user space to manipulate the enabled field of the corresponding profile. Namely, switching the enabled attribute from '0' to '1' will cause the common hotplug notify handler to be installed for all ACPI namespace objects representing devices matching the scan handler associated with the given hotplug profile (and analogously for the converse switch). Drivers willing to use the new user space interface should add their ACPI scan handlers with the help of new funtion acpi_scan_add_handler_with_hotplug(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Tested-by: Toshi Kani <toshi.kani@hp.com>
2013-03-04ACPI / scan: Introduce acpi_scan_handler_matching()Rafael J. Wysocki
Introduce new helper routine acpi_scan_handler_matching() for checking if the given ACPI scan handler matches a given device ID and rework acpi_scan_match_handler() to use the new routine (that routine will also be useful for other purposes in the future). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Tested-by: Toshi Kani <toshi.kani@hp.com>
2013-03-04ACPI / container: Use common hotplug codeRafael J. Wysocki
Switch the ACPI container driver to using common device hotplug code introduced previously. This reduces the driver down to a trivial definition and registration of a struct acpi_scan_handler object. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Tested-by: Toshi Kani <toshi.kani@hp.com>
2013-03-04ACPI / scan: Introduce common code for ACPI-based device hotplugRafael J. Wysocki
Multiple drivers handling hotplug-capable ACPI device nodes install notify handlers covering the same types of events in a very similar way. Moreover, those handlers are installed in separate namespace walks, although that really should be done during namespace scans carried out by acpi_bus_scan(). This leads to substantial code duplication, unnecessary overhead and behavior that is hard to follow. For this reason, introduce common code in drivers/acpi/scan.c for handling hotplug-related notification and carrying out device insertion and eject operations in a generic fashion, such that it may be used by all of the relevant drivers in the future. To cover the existing differences between those drivers introduce struct acpi_hotplug_profile for representing collections of hotplug settings associated with different ACPI scan handlers that can be used by the drivers to make the common code reflect their current behavior. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Tested-by: Toshi Kani <toshi.kani@hp.com>
2013-03-04ACPI / scan: Introduce acpi_scan_match_handler()Rafael J. Wysocki
Introduce helper routine acpi_scan_match_handler() that will find the ACPI scan handler matching a given device ID, if there is one, and rework acpi_scan_attach_handler() to use the new routine (that routine will also be useful for other purposes going forward). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Tested-by: Toshi Kani <toshi.kani@hp.com>
2013-03-04ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_typeRafael J. Wysocki
After PCI and USB have stopped using the .find_bridge() callback in struct acpi_bus_type, the only remaining user of it is SATA, but SATA only pretends to be a user, because it points that callback to a stub always returning -ENODEV. For this reason, drop the SATA's dummy .find_bridge() callback and remove .find_bridge(), which is not used any more, from struct acpi_bus_type entirely. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Jeff Garzik <jgarzik@pobox.com>
2013-03-04ACPI / glue: Add .match() callback to struct acpi_bus_typeRafael J. Wysocki
USB uses the .find_bridge() callback from struct acpi_bus_type incorrectly, because as a result of the way it is used by USB every device in the system that doesn't have a bus type or parent is passed to usb_acpi_find_device() for inspection. What USB actually needs, though, is to call usb_acpi_find_device() for USB ports that don't have a bus type defined, but have usb_port_device_type as their device type, as well as for USB devices. To fix that replace the struct bus_type pointer in struct acpi_bus_type used for matching devices to specific subsystems with a .match() callback to be used for this purpose and update the users of struct acpi_bus_type, including USB, accordingly. Define the .match() callback routine for USB, usb_acpi_bus_match(), in such a way that it will cover both USB devices and USB ports and remove the now redundant .find_bridge() callback pointer from usb_acpi_bus. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Jeff Garzik <jgarzik@pobox.com>
2013-03-04ACPI / porocessor: Beautify code, pr->id is u32 which is never < 0Chen Gang
pr->id is u32 which never < 0, so remove the redundant pr->id < 0 check from acpi_processor_add(). [rjw: Changelog] Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-04ACPI / processor: Remove redundant NULL check before kfreeSyam Sidhardhan
kfree() on a NULL pointer is a no-op, so remove a redundant NULL pointer check in map_mat_entry(). [rjw: Changelog] Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-04ACPI / Sleep: Avoid interleaved message on errorsJoe Perches
Got this dmesg log on an Acer Aspire 725. [ 0.256351] ACPI: (supports S0ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568) [ 0.256373] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568) [ 0.256391] S3 S4 S5) Avoid this interleaving error messages. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-02x86, ACPI, mm: Revert movablemem_map supportYinghai Lu
Tim found: WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane.isra.2+0x6f/0x80() Hardware name: S2600CP sched: CPU #1's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency. smpboot: Booting Node 1, Processors #1 Modules linked in: Pid: 0, comm: swapper/1 Not tainted 3.9.0-0-generic #1 Call Trace: set_cpu_sibling_map+0x279/0x449 start_secondary+0x11d/0x1e5 Don Morris reproduced on a HP z620 workstation, and bisected it to commit e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock is ready") It turns out movable_map has some problems, and it breaks several things 1. numa_init is called several times, NOT just for srat. so those nodes_clear(numa_nodes_parsed) memset(&numa_meminfo, 0, sizeof(numa_meminfo)) can not be just removed. Need to consider sequence is: numaq, srat, amd, dummy. and make fall back path working. 2. simply split acpi_numa_init to early_parse_srat. a. that early_parse_srat is NOT called for ia64, so you break ia64. b. for (i = 0; i < MAX_LOCAL_APIC; i++) set_apicid_to_node(i, NUMA_NO_NODE) still left in numa_init. So it will just clear result from early_parse_srat. it should be moved before that.... c. it breaks ACPI_TABLE_OVERIDE...as the acpi table scan is moved early before override from INITRD is settled. 3. that patch TITLE is total misleading, there is NO x86 in the title, but it changes critical x86 code. It caused x86 guys did not pay attention to find the problem early. Those patches really should be routed via tip/x86/mm. 4. after that commit, following range can not use movable ram: a. real_mode code.... well..funny, legacy Node0 [0,1M) could be hot-removed? b. initrd... it will be freed after booting, so it could be on movable... c. crashkernel for kdump...: looks like we can not put kdump kernel above 4G anymore. d. init_mem_mapping: can not put page table high anymore. e. initmem_init: vmemmap can not be high local node anymore. That is not good. If node is hotplugable, the mem related range like page table and vmemmap could be on the that node without problem and should be on that node. We have workaround patch that could fix some problems, but some can not be fixed. So just remove that offending commit and related ones including: f7210e6c4ac7 ("mm/memblock.c: use CONFIG_HAVE_MEMBLOCK_NODE_MAP to protect movablecore_map in memblock_overlaps_region().") 01a178a94e8e ("acpi, memory-hotplug: support getting hotplug info from SRAT") 27168d38fa20 ("acpi, memory-hotplug: extend movablemem_map ranges to the end of node") e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock is ready") fb06bc8e5f42 ("page_alloc: bootmem limit with movablecore_map") 42f47e27e761 ("page_alloc: make movablemem_map have higher priority") 6981ec31146c ("page_alloc: introduce zone_movable_limit[] to keep movable limit for nodes") 34b71f1e04fc ("page_alloc: add movable_memmap kernel parameter") 4d59a75125d5 ("x86: get pg_data_t's memory from other node") Later we should have patches that will make sure kernel put page table and vmemmap on local node ram instead of push them down to node0. Also need to find way to put other kernel used ram to local node ram. Reported-by: Tim Gardner <tim.gardner@canonical.com> Reported-by: Don Morris <don.morris@hp.com> Bisected-by: Don Morris <don.morris@hp.com> Tested-by: Don Morris <don.morris@hp.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28Merge branch 'linux_next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull EDAC fixes and ghes-edac from Mauro Carvalho Chehab: "For: - Some fixes at edac drivers (i7core_edac, sb_edac, i3200_edac); - error injection support for i5100, when EDAC debug is enabled; - fix edac when it is loaded builtin (early init for the subsystem); - a "Firmware First" EDAC driver, allowing ghes to report errors via EDAC (ghes-edac). With regards to ghes-edac, this fixes a longstanding BZ at Red Hat that happens with Nehalem and Sandy Bridge CPUs: when both GHES and i7core_edac or sb_edac are running, the error reports are unpredictable, as both BIOS and OS race to access the registers. With ghes-edac, the EDAC core will refuse to register any other concurrent memory error driver. This patchset moves the ghes struct definitions to a separate header file (include/acpi/ghes.h) and adds 3 hooks at apei/ghes.c to register/unregister and to report errors via ghes-edac. Those changes were acked by ghes driver maintainer (Huang)." * 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (30 commits) i5100_edac: convert to use simple_open() ghes_edac: fix to use list_for_each_entry_safe() when delete list items ghes_edac: Fix RAS tracing ghes_edac: Make it compliant with UEFI spec 2.3.1 ghes_edac: Improve driver's printk messages ghes_edac: Don't credit the same memory dimm twice ghes_edac: do a better job of filling EDAC DIMM info ghes_edac: add support for reporting errors via EDAC ghes_edac: Register at EDAC core the BIOS report ghes: add the needed hooks for EDAC error report ghes: move structures/enum to a header file edac: add support for error type "Info" edac: add support for raw error reports edac: reduce stack pressure by using a pre-allocated buffer edac: lock module owner to avoid error report conflicts edac: remove proc_name from mci structure edac: add a new memory layer type edac: initialize the core earlier edac: better report error conditions in debug mode i5100_edac: Remove two checkpatch warnings ...
2013-02-27Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more x86 fixes from Peter Anvin: "Additional x86 fixes. Three of these patches are pure documentation, two are pretty trivial; the remaining one fixes boot problems on some non-BIOS machines." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Make sure we can boot in the case the BDA contains pure garbage x86, efi: Mark disable_runtime as __initdata x86, doc: Fix incorrect comment about 64-bit code segment descriptors doc, kernel-parameters: Document 'console=hvc<n>' doc, xen: Mention 'earlyprintk=xen' in the documentation. ACPI: Overriding ACPI tables via initrd only works with an initrd and on X86
2013-02-25Merge tag 'pm+acpi-fixes-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - Fixes for blackfin and microblaze build problems introduced by the removal of global pm_idle. From Lars-Peter Clausen. - OPP core build fix from Shawn Guo. - Error condition check fix for the new imx6q-cpufreq driver from Wei Yongjun. - Fix for an AER driver crash related to the lack of APEI initialization for acpi=off. From Rafael J Wysocki. - Fix for a USB breakage on Thinkpad T430 related to ACPI power resources and PCI wakeup from Rafael J. Wysocki. * tag 'pm+acpi-fixes-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PM: Take unusual configurations of power resources into account imx6q-cpufreq: fix return value check in imx6q_cpufreq_probe() PM / OPP: fix condition for empty of_init_opp_table() ACPI / APEI: Fix crash in apei_hest_parse() for acpi=off microblaze idle: Fix compile error blackfin idle: Fix compile error
2013-02-25Merge tag 'pci-v3.9-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu) - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu) - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu) - Stop caching _PRT and make independent of bus numbers (Yinghai Lu) PCI device hotplug - Clean up cpqphp dead code (Sasha Levin) - Disable ARI unless device and upstream bridge support it (Yijing Wang) - Initialize all hot-added devices (not functions 0-7) (Yijing Wang) Power management - Don't touch ASPM if disabled (Joe Lawrence) - Fix ASPM link state management (Myron Stowe) Miscellaneous - Fix PCI_EXP_FLAGS accessor (Alex Williamson) - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov) - Document hotplug resource and MPS parameters (Yijing Wang) - Add accessor for PCIe capabilities (Myron Stowe) - Drop pciehp suspend/resume messages (Paul Bolle) - Make pci_slot built-in only (not a module) (Jiang Liu) - Remove unused PCI/ACPI bind ops (Jiang Liu) - Removed used pci_root_bus (Bjorn Helgaas)" * tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS ACPI / PCI: Make pci_slot built-in only, not a module PCI/PM: Clear state_saved during suspend PCI: Use atomic_inc_return() rather than atomic_add_return() PCI: Catch attempts to disable already-disabled devices PCI: Disable Bus Master unconditionally in pci_device_shutdown() PCI: acpiphp: Remove dead code for PCI host bridge hotplug PCI: acpiphp: Create companion ACPI devices before creating PCI devices PCI: Remove unused "rc" in virtfn_add_bus() PCI: pciehp: Drop suspend/resume ENTRY messages PCI/ASPM: Don't touch ASPM if forcibly disabled PCI/ASPM: Deallocate upstream link state even if device is not PCIe PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc PCI: Document hpiosize= and hpmemsize= resource reservation parameters PCI: Use PCI Express Capability accessor PCI: Introduce accessor to retrieve PCIe Capabilities Register PCI: Put pci_dev in device tree as early as possible PCI: Skip attaching driver in device_add() PCI: acpiphp: Keep driver loaded even if no slots found ...
2013-02-25Merge tag 'modules-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module update from Rusty Russell: "The sweeping change is to make add_taint() explicitly indicate whether to disable lockdep, but it's a mechanical change." * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: MODSIGN: Add option to not sign modules during modules_install MODSIGN: Add -s <signature> option to sign-file MODSIGN: Specify the hash algorithm on sign-file command line MODSIGN: Simplify Makefile with a Kconfig helper module: clean up load_module a little more. modpost: Ignore ARC specific non-alloc sections module: constify within_module_* taint: add explicit flag to show whether lock dep is still OK. module: printk message when module signature fail taints kernel.
2013-02-25ghes: add the needed hooks for EDAC error reportMauro Carvalho Chehab
In order to allow reporting errors via EDAC, add hooks for: 1) register an EDAC driver; 2) unregister an EDAC driver; 3) report errors via EDAC. As the EDAC driver will need to access the ghes structure, adds it as one of the parameters for ghes_do_proc. Acked-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25ACPI: Overriding ACPI tables via initrd only works with an initrd and on X86Thomas Renninger
Reflect this dependency in Kconfig, to prevent build failures. Shorten the config description as suggested by Borislav Petkov. Finding a suitable memory area to store the modified table(s) has been taken over from arch/x86/kernel/setup.c and makes use of max_low_pfn_mapped: memblock_find_in_range(0, max_low_pfn_mapped,...) This one is X86 specific. It may not be hard to extend this functionality for other ACPI aware architectures if there is need for. For now make this feature only available for X86 to avoid build failures on IA64, compare with: https://bugzilla.kernel.org/show_bug.cgi?id=54091 Signed-off-by: Thomas Renninger <trenn@suse.de> Link: http://lkml.kernel.org/r/1361538742-67599-3-git-send-email-trenn@suse.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-23acpi, memory-hotplug: parse SRAT before memblock is readyTang Chen
On linux, the pages used by kernel could not be migrated. As a result, if a memory range is used by kernel, it cannot be hot-removed. So if we want to hot-remove memory, we should prevent kernel from using it. The way now used to prevent this is specify a memory range by movablemem_map boot option and set it as ZONE_MOVABLE. But when the system is booting, memblock will allocate memory, and reserve the memory for kernel. And before we parse SRAT, and know the node memory ranges, memblock is working. And it may allocate memory in ranges to be set as ZONE_MOVABLE. This memory can be used by kernel, and never be freed. So, let's parse SRAT before memblock is called first. And it is early enough. The first call of memblock_find_in_range_node() is in: setup_arch() |-->setup_real_mode() so, this patch add a function early_parse_srat() to parse SRAT, and call it before setup_real_mode() is called. NOTE: 1) early_parse_srat() is called before numa_init(), and has initialized numa_meminfo. So DO NOT clear numa_nodes_parsed in numa_init() and DO NOT zero numa_meminfo in numa_init(), otherwise we will lose memory numa info. 2) I don't know why using count of memory affinities parsed from SRAT as a return value in original acpi_numa_init(). So I add a static variable srat_mem_cnt to remember this count and use it as the return value of the new acpi_numa_init() [mhocko@suse.cz: parse SRAT before memblock is ready fix] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Wen Congyang <wency@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Len Brown <lenb@kernel.org> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23cpu-hotplug, memory-hotplug: try offlining the node when hotremoving a cpuWen Congyang
The node will be offlined when all memory/cpu on the node is hotremoved. So we should try offline the node when hotremoving a cpu on the node. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23memory-hotplug: remove sysfs file of nodeTang Chen
Introduce a new function try_offline_node() to remove sysfs file of node when all memory sections of this node are removed. If some memory sections of this node are not removed, this function does nothing. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23Merge branch 'acpi-pm' into fixesRafael J. Wysocki
* acpi-pm: ACPI / PM: Take unusual configurations of power resources into account
2013-02-23ACPI / PM: Take unusual configurations of power resources into accountRafael J. Wysocki
Commit d2e5f0c (ACPI / PCI: Rework the setup and cleanup of device wakeup) moved the initial disabling of system wakeup for PCI devices into a place where it can actually work and that exposed a hidden old issue with crap^Wunusual system designs where the same power resources are used for both wakeup power and device power control at run time. Namely, say there is one power resource such that the ACPI power state D0 of a PCI device depends on that power resource (i.e. the device is in D0 when that power resource is "on") and it is used as a wakeup power resource for the same device. Then, calling acpi_pci_sleep_wake(pci_dev, false) for the device in question will cause the reference counter of that power resource to drop to 0, which in turn will cause it to be turned off. As a result, the device will go into D3cold at that point, although it should have stayed in D0. As it turns out, that happens to USB controllers on some laptops and USB becomes unusable on those machines as a result, which is a major regression from v3.8. To fix this problem, (1) increment the reference counters of wakup power resources during their initialization if they are "on" initially, (2) prevent acpi_disable_wakeup_device_power() from decrementing the reference counters of wakeup power resources that were not enabled for wakeup power previously, and (3) prevent acpi_enable_wakeup_device_power() from incrementing the reference counters of wakeup power resources that already are enabled for wakeup power. In addition to that, if it is impossible to determine the initial states of wakeup power resources, avoid enabling wakeup for devices whose wakeup power depends on those power resources. Reported-by: Dave Jones <davej@redhat.com> Reported-by: Fabio Baltieri <fabio.baltieri@linaro.org> Tested-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-23Merge branch 'acpi-cleanup' into fixesRafael J. Wysocki
* acpi-cleanup: ACPI / APEI: Fix crash in apei_hest_parse() for acpi=off