summaryrefslogtreecommitdiffstats
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2009-06-16Merge branch 'acpica' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits) ACPICA: Update version to 20090521. ACPICA: Disable preservation of SCI enable bit (SCI_EN) ACPICA: Region deletion: Ensure region object is removed from handler list ACPICA: Eliminate extra call to NsGetParentNode ACPICA: Simplify internal operation region interface ACPICA: Update Load() to use operation region interfaces ACPICA: New: AcpiInstallMethod - install a single control method ACPICA: Invalidate DdbHandle after table unload ACPICA: Fix reference count issues for DdbHandle object ACPICA: Simplify and optimize NsGetNextNode function ACPICA: Additional validation of _PRT packages (resource mgr) ACPICA: Fix DebugObject output for DdbHandle objects ACPICA: Fix allowable release order for ASL mutex objects ACPICA: Mutex support: Fix release ordering issue and current sync level ACPICA: Update version to 20090422. ACPICA: Linux OSL: cleanup/update/merge ACPICA: Fix implementation of AML BreakPoint operator (break to debugger) ACPICA: Fix miscellaneous warnings under gcc 4+ ACPICA: Miscellaneous lint changes ACPICA: Fix possible dereference of null pointer ...
2009-06-10Merge branch 'irq-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (76 commits) x86, apic: Fix dummy apic read operation together with broken MP handling x86, apic: Restore irqs on fail paths x86: Print real IOAPIC version for x86-64 x86: enable_update_mptable should be a macro sparseirq: Allow early irq_desc allocation x86, io-apic: Don't mark pin_programmed early x86, irq: don't call mp_config_acpi_gsi() if update_mptable is not enabled x86, irq: update_mptable needs pci_routeirq x86: don't call read_apic_id if !cpu_has_apic x86, apic: introduce io_apic_irq_attr x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector(), fix x86: read apic ID in the !acpi_lapic case x86: apic: Fixmap apic address even if apic disabled x86: display extended apic registers with print_local_APIC and cpu_debug code x86: read apic ID in the !acpi_lapic case x86: clean up and fix setup_clear/force_cpu_cap handling x86: apic: Check rev 3 fadt correctly for physical_apic bit x86/pci: update pirq_enable_irq() to setup io apic routing x86/acpi: move setup io apic routing out of CONFIG_ACPI scope x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector() ...
2009-06-09cpumask: alloc zeroed cpumask for static cpumask_var_tsYinghai Lu
These are defined as static cpumask_var_t so if MAXSMP is not used, they are cleared already. Avoid surprises when MAXSMP is enabled. Signed-off-by: Yinghai Lu <yinghai.lu@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-01Merge branch 'linus' into irq/numaIngo Molnar
Conflicts: arch/mips/sibyte/bcm1480/irq.c arch/mips/sibyte/sb1250/irq.c Merge reason: we gathered a few conflicts plus update to latest upstream fixes. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29Merge branches 'bugzilla-13121+', 'bugzilla-13233', ↵Len Brown
'redhat-bugzilla-500311', 'pci-bind-oops', 'misc-2.6.30' and 'i7300_idle' into release
2009-05-29ACPI processor: remove spurious newline from warning messageFrans Pop
Commit 4973b22a ("ACPI processor: reset the throttling state once it's invalid") introduced a new warning which prints a spurious newline. The ACPI_WARNING macro that is used already takes care of adding a newline, after adding ACPI_CA_VERSION to the message. Remove the newline to avoid the message getting split into two lines. Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29drm/i915: acpi/video.c fix section mismatch warningJaswinder Singh Rajput
Currently acpi_video_exit() is exported as well as using __exit which causes: WARNING: drivers/acpi/video.o(__ksymtab+0x0): Section mismatch in reference from the variable __ksymtab_acpi_video_exit to the function .exit.text:acpi_video_exit() The symbol acpi_video_exit is exported and annotated __exit Fix this by removing the __exit annotation of acpi_video_exit or drop the export. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29ACPI: video: DMI workaround broken Acer 5315 BIOS enabling display brightnessZhang Rui
http://bugzilla.kernel.org/show_bug.cgi?id=13121 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29ACPI: video: DMI workaround broken eMachines E510 BIOS enabling display ↵Zhang Rui
brightness http://bugzilla.kernel.org/show_bug.cgi?id=13376 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29ACPI: sanity check _PSS frequency to prevent cpufreq crashLen Brown
When BIOS SETUP is changed to disable EIST, some BIOS hand the OS an un-initialized _PSS: Name (_PSS, Package (0x06) { Package (0x06) { 0x80000000, // frequency [MHz] 0x80000000, // power [mW] 0x80000000, // latency [us] 0x80000000, // BM latency [us] 0x80000000, // control 0x80000000 // status }, ... These are outrageous values for frequency, power and latency, raising the question where to draw the line between legal and illegal. We tend to survive garbage in the power and latency fields, but we can BUG_ON when garbage is in the frequency field. Cpufreq multiplies the frequency by 1000 and stores it in a u32 KHz. So disregard a _PSS with a frequency so large that it can't be represented by cpufreq. https://bugzilla.redhat.com/show_bug.cgi?id=500311 Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27PCI/ACPI: fix wrong ref count handling in acpi_pci_bind()Kenji Kaneshige
The 'dev' field of struct acpi_pci_data is having a pointer to struct pci_dev without incrementing the reference counter. Because of this, I got the following kernel oops when I was doing some pci hotplug operations. This patch fixes this bug by replacing wrong hand-made pci_find_slot() with pci_get_slot() in acpi_pci_bind(). BUG: unable to handle kernel NULL pointer dereference at 00000000000000e8 IP: [<ffffffff803f0e9b>] acpi_pci_unbind+0xb1/0xdd Call Trace: [<ffffffff803ecee4>] acpi_bus_remove+0x54/0x68 [<ffffffff803ecf6d>] acpi_bus_trim+0x75/0xe3 [<ffffffffa0345ddd>] acpiphp_disable_slot+0x16d/0x1e0 [acpiphp] [<ffffffffa03441f0>] disable_slot+0x20/0x60 [acpiphp] [<ffffffff803cfc18>] power_write_file+0xc8/0x110 [<ffffffff803c6a54>] pci_slot_attr_store+0x24/0x30 [<ffffffff803469ce>] sysfs_write_file+0xce/0x140 [<ffffffff802e94e7>] vfs_write+0xc7/0x170 [<ffffffff802e9aa0>] sys_write+0x50/0x90 [<ffffffff8020bd6b>] system_call_fastpath+0x16/0x1b Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: Alex Chiang <achiang@hp.com> Tested-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Disable preservation of SCI enable bit (SCI_EN)Bob Moore
Preserving this bit breaks some machines. Not preserving this bit seems to work OK in all cases, even though this goes against the ACPI spec. http://bugzilla.kernel.org/show_bug.cgi?id=13289 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Region deletion: Ensure region object is removed from handler listLin Ming
Prevents a possible fault when a dynamic operation region is deleted. ACPICA BZ 507. http://acpica.org/bugzilla/show_bug.cgi?id=507 Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Eliminate extra call to NsGetParentNodeAlex Chiang
Was called twice in the same function with the same parameter. Alex Chiang. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Simplify internal operation region interfaceBob Moore
Changed address parameter to a simple offset. This removes the need for the caller to access the region object to obtain the physical address. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Update Load() to use operation region interfacesBob Moore
Replace memory mapping with region access calls. Now, all region accesses go through the region handler as they should. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: New: AcpiInstallMethod - install a single control methodLin Ming
This interface enables the override or creation of a single control method. Useful to repair a bug or install a missing method. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Invalidate DdbHandle after table unloadLin Ming
Mark the DdbHandle as invalid after the table it refers to is unloaded. This is needed because the handle itself may not be deleted after the table unload, depending on whether it has been stored in a named object by the caller. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Fix reference count issues for DdbHandle objectLin Ming
Fix a problem where the DdbHandle could be prematurely deleted, possibly causing a fault. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Simplify and optimize NsGetNextNode functionBob Moore
Reduced parameter count and reduced code for this frequently used function. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Additional validation of _PRT packages (resource mgr)Bob Moore
Fixes a possible fault when parsing an ill-formed _PRT package. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Fix DebugObject output for DdbHandle objectsBob Moore
Was putting several extra spaces on the next line. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Fix allowable release order for ASL mutex objectsBob Moore
The ACPI 4.0 specification has been changed to make the SyncLevel for mutex objects more useful. When releasing a mutex, the synclevel of the mutex must now be the same as the current sync level. This makes more sense. This change updates the code to match the spec. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Mutex support: Fix release ordering issue and current sync levelBob Moore
Fixes a problem where if multiple mutexes of the same sync level are acquired but then not released in strict opposite order, the current sync level becomes confused and can cause errors. ACPICA BZ 471. http://acpica.org/bugzilla/show_bug.cgi?id=471 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Fix implementation of AML BreakPoint operator (break to debugger)Bob Moore
The AML BreakPoint opcode will now cause a break into the AML debugger if it is present/configured. This matches the expected behavior per the ACPI specification. Previously, only a message was output. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Fix miscellaneous warnings under gcc 4+Bob Moore
Some possible warnings with gcc 4+, especially with extended warnings enabled Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Miscellaneous lint changesBob Moore
Unused variables/headers, casting, etc. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Fix possible dereference of null pointerBob Moore
Fix dereference of possibly null pointer "Predefined" in the case where the method is not one of the predefined methods. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Fix printf format warnings for 64-bit buildBob Moore
Fix warnings caused by size_t and ACPI_SIZE changing to 64 bits. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Fix possible warnings for ACPI_THREAD_ID on 64-bit buildBob Moore
Warnings can be generated for printf-like statements that output the ACPI_THREAD_ID on 64-bit builds, since this type can expand to 64-bits depending on how it is defined. Use the %p format specifier to allow the output to automatically expand to 64 bits. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Remove unused global variablesBob Moore
Remove two unused/obsolete variables. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Change behavior of object copy for mutex/event objectsBob Moore
When copying these internal objects, cannot simply copy the underlying OS object. A new OS object must be created. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Fix a few warnings for gcc 3.4.4Bob Moore
Mostly for acpiexec, one in the core subsystem. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27ACPICA: Update error/warning interfacesBob Moore
Moved the module name and line number to the end of the message. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-26cpuidle: fix AMD C1E suspend hangShaohua Li
When AMD C1E is enabled, local APIC timer will stop even in C1. To avoid suspend/resume hang, this patch removes C1 and replace it with a cpu_relax() in suspend/resume path. This hasn't any impact in runtime path. http://bugzilla.kernel.org/show_bug.cgi?id=13233 [ impact: avoid suspend/resume hang in AMD CPU with C1E enabled ] Tested-by: Dmitry Lyzhyn <thisistempbox@yahoo.com> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-26cpuidle: makes AMD C1E work in acpi_idleShaohua Li
When AMD C1E is enabled, local APIC timer will stop even in C1. This patch uses broadcast IPI to replace local APIC timer in C1. http://bugzilla.kernel.org/show_bug.cgi?id=13233 [ impact: avoid boot hang in AMD CPU with C1E enabled ] Tested-by: Dmitry Lyzhyn <thisistempbox@yahoo.com> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-16Merge branches 'release', 'bugzilla-13032', 'bugzilla-13041+', ↵Len Brown
'bugzilla-13121', 'bugzilla-13165', 'bugzilla-13243', 'bugzilla-13259', 'resume-sci-en-regression', 'thermal-regression', 'tsc-regression' and 'asus-2.6.30' into release
2009-05-16ACPI: Idle C-states disabled by max_cstate should not disable the TSCLen Brown
Processor idle power states C2 and C3 stop the TSC on many machines. Linux recognizes this situation and marks the TSC as unstable: Marking TSC unstable due to TSC halts in idle But if those same machines are booted with "processor.max_cstate=1", then there is no need to validate C2 and C3, and no need to disable the TSC, which can be reliably used as a clocksource. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-16ACPI: idle: fix init-time TSC check regressionLen Brown
A previous 2.6.30 patch, a71e4917dc0ebbcb5a0ecb7ca3486643c1c9a6e2, (ACPI: idle: mark_tsc_unstable() at init-time, not run-time) erroneously disabled the TSC on systems that did not actually have valid deep C-states. Move the check after the deep-C-states are validated, via new helper, tsc_check_state(), hich replaces tsc_halts_in_c(). Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Frans Pop <elendil@planet.nl>
2009-05-15ACPI processor: reset the throttling state once it's invalidZhang Rui
If the BIOS hands us an invalid throttling state, write a valid state. http://bugzilla.kernel.org/show_bug.cgi?id=13259 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: James Ettle <theholyettlz@googlemail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-15ACPI processor: introduce module parameter processor.ignore_tpcZhang Rui
Introduce module parameter processor.ignore_tpc. Some laptops are shipped with buggy _TPC, this module parameter is used to to disable the buggy support. http://bugzilla.kernel.org/show_bug.cgi?id=13259 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: James Ettle <theholyettlz@googlemail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-15ACPI: suspend: restore BM_RLD on resumeLen Brown
In 2.6.29, 31878dd86b7df9a147f5e6cc6e07092b4308782b "ACPI: remove BM_RLD access from idle entry path" moved BM_RLD initialization to init-time from run time. But we discovered that some BIOS do not restore BM_RLD after suspend, causing device errors on C3 and C4 after resume. So now the kernel restores BM_RLD. http://bugzilla.kernel.org/show_bug.cgi?id=13032 Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-15ACPI: resume: re-enable SCI-enable workaroundLin Ming
The BIOS bug workaround mistakenly got disabled when we followed the ACPI specification more closely by ignoring OS updates to that bit. (The BIOS is supposed to update SCI_EN, not the OS) http://bugzilla.kernel.org/show_bug.cgi?id=13289 Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-12Merge branch 'x86/apic' into irq/numaIngo Molnar
Merge reason: both topics modify the APIC code but were able to do it in parallel so far. An upcoming patch generates a conflict so merge them to avoid the conflict. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-08ACPI: power: update error messageLen Brown
"Transitioning device [%s] to D%d" is not correct. We print this line when we attempted to transition the device, and it failed. So instead, print "Device [%s] failed to transition to D%d\n" This can happen under two conditions: 1. acpi_power_transition() fails when trying to handle the _ON/_OFF for associated power resource. 2. acpi_evaluate_object() on the explicit _PS0/_PS3 for that actual device could fail. this change clarifies, but doesn't fix http://bugzilla.kernel.org/show_bug.cgi?id=13243 Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-07ACPI: video: DMI workaround another broken Acer BIOS enabling display brightnessLen Brown
http://bugzilla.kernel.org/show_bug.cgi?id=13121 Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-07ACPICA: use acpi.* modparam namespaceLen Brown
Add acpi/acpica/*.c to the acpi.* modparam namespace so that any modparams we stick into ACPICA do not expose ACPICA filenames to users. There are currently only two modparams in ACPICA, just recently added for http://bugzilla.kernel.org/show_bug.cgi?id=13041 With this change, they become acpi.gts=1 acpi.bfs=1 rather than hwsleep.gts=1 hwsleep.bfs=1 Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-02acpica: validate package element more carefully in ↵Robert Moore
acpi_rs_get_pci_routing_table_length acpi_rs_get_pci_routing_table_length is not performing sufficient validation on the package returned from _PRT. It assumes a package of packages and fails/faults if this is not the case. We should validate each subpackage when extracted from the parent package, and not accept objects of the wrong type, since that will just cause the scanning to fail (likely with a kernel oops). This can only happen with a serious BIOS bug, and is accompanied by a warning something like this: ACPI Warning (nspredef-0949): \_SB_.PCI0.PEG4._PRT: Return Package type mismatch at index 0 - found Integer, expected Package [20090320] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-28Merge branch 'drm-intel-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: fix up error path leak in i915_cmdbuffer drm/i915: fix unpaired i915 device mutex on entervt failure. drm/i915: add support for G41 chipset drm/i915: Enable ASLE if present drm/i915: Unregister ACPI video driver when exiting drm/i915: Register ACPI video even when not modesetting drm/i915: fix transition to I915_TILING_NONE drm/i915: Don't let an oops get triggered from irq_emit without dma init. drm/i915: allow tiled front buffers on 965+
2009-04-28irq: change ACPI GSI APIs to also take a device argumentYinghai Lu
We want to use dev_to_node() later on, to be aware of the 'home node' of the GSI in question. [ Impact: cleanup, prepare the IRQ code to be more NUMA aware ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Len Brown <lenb@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-acpi@vger.kernel.org Cc: linux-ia64@vger.kernel.org LKML-Reference: <49F65560.20904@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>