summaryrefslogtreecommitdiffstats
path: root/drivers/ata/ahci.h
AgeCommit message (Collapse)Author
2011-07-23ahci: move ahci_sb600_softreset to libahci.c and rename itYuan-Hsin Chen
ahci_sb600_softreset was in ahci.c. This function is used to fix soft reset failure and renames as ahci_pmp_retry_softreset in libahci.c. Signed-off-by: Yuan-Hsin Chen <yhchen@faraday-tech.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24ahci: EM supported message type sysfs attributeHannes Reinecke
This patch adds an sysfs attribute 'em_message_supported' to the ahci host device which prints out the supported enclosure management message types. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-02libata: remove ATA_FLAG_LPMSergei Shtylyov
Commit 6b7ae9545ad9875a289f4191c0216b473e313cb9 (libata: reimplement link power management) removed the check of ATA_FLAG_LPM but neglected to remove the flag itself. Do it now... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: remove ATA_FLAG_NO_LEGACYSergei Shtylyov
All checks of ATA_FLAG_NO_LEGACY have been removed by the commits c791c30670ea61f19eec390124128bf278e854fe ([libata] minor PCI IDE probe fixes and cleanups) and f0d36efdc624beb3d9e29b9ab9e9537bf0f25d5b (libata: update libata core layer to use devres), so I think it's time to finally get rid of this flag... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: remove ATA_FLAG_MMIOSergei Shtylyov
Commit 0d5ff566779f894ca9937231a181eb31e4adff0e (libata: convert to iomap) removed all checks of ATA_FLAG_MMIO but neglected to remove the flag itself. Do it now, at last... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-05[libata] new driver acard_ahci, for ATP8620 host controllerDavid Milburn
Add support for Acard ATP8620 host controller. Based upon initial version by Jeff Garzik. Signed-off-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21libahci: fix result_tf handling after an ATA PIO data-in commandTejun Heo
ATA devices don't send D2H Reg FIS after an successful ATA PIO data-in command. The host is supposed to take the TF and E_Status of the preceding PIO Setup FIS. Update ahci_qc_fill_rtf() such that it takes TF + E_Status from PIO Setup FIS after a successful ATA PIO data-in command. Without this patch, result_tf for such a command is filled with the content of the previous D2H Reg FIS which belongs to a previous command, which can make the command incorrectly seen as failed. * Patch updated to grab the whole TF + E_Status from PIO Setup FIS instead of just E_Status as suggested by Robert Hancock. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Mark Lord <kernel@teksavvy.com> Cc: Robert Hancock <hancockrwd@gmail.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21libata: reimplement link power managementTejun Heo
The current LPM implementation has the following issues. * Operation order isn't well thought-out. e.g. HIPM should be configured after IPM in SControl is properly configured. Not the other way around. * Suspend/resume paths call ata_lpm_enable/disable() which must only be called from EH context directly. Also, ata_lpm_enable/disable() were called whether LPM was in use or not. * Implementation is per-port when it should be per-link. As a result, it can't be used for controllers with slave links or PMP. * LPM state isn't managed consistently. After a link reset for whatever reason including suspend/resume the actual LPM state would be reset leaving ap->lpm_policy inconsistent. * Generic/driver-specific logic boundary isn't clear. Currently, libahci has to mangle stuff which libata EH proper should be handling. This makes the implementation unnecessarily complex and fragile. * Tied to ALPM. Doesn't consider DIPM only cases and doesn't check whether the device allows HIPM. * Error handling isn't implemented. Given the extent of mismatch with the rest of libata, I don't think trying to fix it piecewise makes much sense. This patch reimplements LPM support. * The new implementation is per-link. The target policy is still port-wide (ap->target_lpm_policy) but all the mechanisms and states are per-link and integrate well with the rest of link abstraction and can work with slave and PMP links. * Core EH has proper control of LPM state. LPM state is reconfigured when and only when reconfiguration is necessary. It makes sure that LPM state is reset when probing for new device on the link. Controller agnostic logic is now implemented in libata EH proper and driver implementation only has to deal with controller specifics. * Proper error handling. LPM config failure is attributed to the device on the link and LPM is disabled for the link if it fails repeatedly. * ops->enable/disable_pm() are replaced with single ops->set_lpm() which takes @policy and @hints. This simplifies driver specific implementation. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21libata: clean up lpm related symbols and sysfs show/store functionsTejun Heo
Link power management related symbols are in confusing state w/ mixed usages of lpm, ipm and pm. This patch cleans up lpm related symbols and sysfs show/store functions as follows. * lpm states - NOT_AVAILABLE, MIN_POWER, MAX_PERFORMANCE and MEDIUM_POWER are renamed to ATA_LPM_UNKNOWN and ATA_LPM_{MIN|MAX|MED}_POWER. * Pre/postfixes are unified to lpm. * sysfs show/store functions for link_power_management_policy were curiously named get/put and unnecessarily complex. Renamed to show/store and simplified. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-09-28ahci: fix module refcount breakage introduced by libahci splitTejun Heo
libata depends on scsi_host_template for module reference counting and sht's should be owned by each low level driver. During libahci split, the sht was left with libahci.ko leaving the actual low level drivers not reference counted. This made ahci and ahci_platform always unloadable even while they're being actively used. Fix it by defining AHCI_SHT() macro in ahci.h and defining a sht for each low level ahci driver. stable: only applicable to 2.6.35. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Pedro Francisco <pedrogfrancisco@gmail.com> Tested-by: Michael Tokarev <mjt@tls.msk.ru> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-08-25ahci: add HFLAG_YES_FBS and apply it to 88SE9128Tejun Heo
88SE9128 can do FBS and sets it in HOST_CAP but forgets to set FBSCP in PORT_CMD. Implement AHCI_HFLAG_YES_FBS and apply it to 88SE9128. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-14ahci: add "em_buffer" attribute for AHCI hostsHarry Zhang
Add "em_buffer" attribute for SATA AHCI hosts to provide a way for userland to access AHCI EM (enclosure management) buffer directly if the host supports EM. AHCI driver should support SGPIO EM messages. However the SATA/AHCI specs did not define the SGPIO message format filled in EM buffer. Different HW vendors may have different definitions. The mainly purpose of this attribute is to solve this issue by allowing HW vendors to provide userland drivers and tools for their SGPIO initiators. Signed-off-by: Harry Zhang <harry.zhang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-14ahci: EM message type auto detectHarry Zhang
Detect enclosure management message type automatically at driver initialization, instead of using module parameter "ahci_em_messages". Signed-off-by: Harry Zhang <harry.zhang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-14ahci: implement AHCI_HFLAG_NO_FPDMA_AA and update NV quirksTejun Heo
It turns out different generations of MCPs have differing quirks. * MCP 65-73 : FPDMA AA broken, lies about PMP support, forgets to report NCQ * MCP 77-79 : FPDMA AA broken, lies about PMP support * MCP 89 : FPDMA AA broken Instead of turngin off FPDMA AA on all NVIDIAs, implement HFLAG_NO_FPDMA_AA, define additional board IDs and apply necessary quirks. This fixes bko#15481 and the list of quirks is verified by Peer Chen. http://bugzilla.kernel.org/show_bug.cgi?id=15481 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Peer Chen <pchen@nvidia.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-14ahci: Move generic code into libahciAnton Vorontsov
This patch should contain no functional changes, just moves code around. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>