summaryrefslogtreecommitdiffstats
path: root/drivers/ata
AgeCommit message (Collapse)Author
2008-04-29ahci: SB600 ahci can't do MSI, blacklist that capabilityTejun Heo
This fixes bz#10507. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Shane Huang <Shane.Huang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29libata: More TSSTcorp pain, keep in sync with legacy IDEAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29pata_via: Fix 6410 misdetectAlan Cox
The discrete VIA ATA chips don't have 0x40 enable bits. We check that properly in one location but not another. This causes some users 6410 RAID cards to be incorrectly skipped. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29[libata] pata_atiixp: fix PIO timing data misprogrammingJeff Garzik
Use correct variable, achieve desired result... Spotted by LKML/linux-ide poster whose name I lost (apologies!) Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29Fix bug - Implement bfin ata interrupt handler to avoid "irq 68 nobody ↵Sonic Zhang
cared" (v2) Return IRQ_HANDLED when bfin ata device is busy. http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3513 v1-v2: - fold api breakage fixing patch together. - mark 'static', not 'inline'. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29sata_mv: Improve naming of main_irq cause/mask identifiersMark Lord
Tidy up naming of things associated with the PCI / SOC chip "main irq cause/mask" registers, as inspired by Jeff. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29libata-scsi: improve rbuf handling for simulated commandsTejun Heo
Buffer length handling in simulated commands is error-prone and full of bugs. There are a number of places where necessary length checks are missing and if the output buffer is passed in as sglist, nothing works. This patch adds a static buffer ata_scsi_rbuf which is sufficiently large to handle the larges output from simulated commands (4k currently), let all simulte functions write to the buffer and removes all length checks as we know that there always is enough buffer space. Copying in (for ATAPI inquiry fix up) and out are handled by sg_copy_to/from_buffer() behind ata_scsi_rbuf_get/put() interface which handles sglist properly. This patch is inspired from buffer length check fix patch from Petr Vandrovec. Updated to use sg_copy_to/from_buffer() as suggested by FUJITA Tomonori. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Petr Vandrovec <petr@vmware.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29libata-scsi: clean up inquiry / mode sense related functionsTejun Heo
* make ata_scsiop_*() static * make ata_scsi_set_sense() static and move it above its users * make ata_scsi_rbuf_fill() static * kill unused ata_scsi_badcmd() Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29[MIPS] ATA: Rename routerboard 500 to 532Ralf Baechle
The platform is actually named routerboard 532 so let's call it this. This patch only rename files, Kconfig and C symbols; no functional changes. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-28typo in sata_fslAl Viro
it's ata_link, not ata_linke Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-25pata_bf54x: decrease count first.Roel Kluin
When count reaches 0 the postfix decrement still subtracts (to -1), so bfin_reset_controller() returns as if the busy flag was cleared while it was not. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Acked-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25sata_mv: re-enable hotplug, update TODO listMark Lord
Re-enable hotplug, now that the interrupt/error handling are mostly sane. Also update the TODO list at the top. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25sata_mv: leave SError bits untouched in mv_err_intrMark Lord
Here it is again, minus the checkpatch.pl complaint: Rework mv_err_intr() to leave the SError bits as-is, so that libata-eh has a chance to see/use them. We originally thought that clearing them here was necessary before writing back to edma_err_cause (per the Marvell datasheets), but we will end up reseting the chip regardless in those cases. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25sata_mv: more interrupt handling reworkMark Lord
Continue fixing the interrupt handling logic. Get rid of mv_intr_pio(), by using ata_sff_host_intr() for PIO.. Add a mv_unexpected_intr() catch-all for "impossible" scenarios, where we get an interrupt that shouldn't have happened (never seen in testing, but just in case..). Rearrange the logic so that we always process completed response queue entries before looking for other events, This avoids having to re-issue commands that had already succeeded. As part of this, we split out some duplicated functionality into a new function, mv_get_active_qc(). Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25sata_mv: tidy host controller interrupt handlingMark Lord
Tidy up host controller interrupt handling, by moving the weirdo bit shifting from mv_interrupt() to mv_host_intr(). This lets us take advantage of the MV_PORT_TO_SHIFT_AND_HARDPORT() macro from an earlier patch to greatly simplify the port numbering logic. Also, defer reading the hc_irq_cause (one per hc) until it is actually proven to be needed. This may save a microsecond or so per interrupt, on average (a later patchset will further reduce unnecessary register reads throughout the driver). Apart from that, we still leave the actual IRQ handling logic alone. Subsequent patches in this series will address that. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25sata_mv: simplify request/response queue handlingMark Lord
Try and simplify handling of the request/response queues. Maintain the cached copies of queue indexes in a fully-masked state, rather than having each use of them have to do the masking. Split off handling of a single crpb response into a separate function, to reduce complexity in the main mv_process_crpb_entries() routine. Ignore the rarely-valid error bits from the crpb status field, as we already handle that information in mv_err_intr(). For now, preserve the rest of the original logic. A later patch will deal with fixing that separately. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25sata_mv: simplify freeze/thaw bit-shift calculationsMark Lord
Introduce the MV_PORT_TO_SHIFT_AND_HARDPORT() macro, to centralize/simplify various scattered bits of logic for calculating bit shifts and the like. Some of the places that do this get it wrong, too, so consolidating the algorithm at one place will help keep the code correct. For now, we use the new macro in mv_eh_{freeze,thaw}. A subsequent patch will re-use this in the interrupt handlers Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25sata_mv mask all interrupt coalescing bitsMark Lord
Ignore *all* interrupt coalescing bits on all controllers, not just some of each. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25sata_mv more cosmeticsMark Lord
More cosmetic cleanups prior to the interrupt/error handling logic changes. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25ata_piix: add Asus Eee 701 controller to short cable listDan McGee
The drive is directly soldered to the controller, so there is no cable at all. Remove the 40-wire assumption so the drive can operate at max speed. Before patch: $ dd if=/dev/sda of=/dev/null bs=2M count=64 iflag=direct 134217728 bytes (134 MB) copied, 5.29612 s, 25.3 MB/s After patch: $ dd if=/dev/sda of=/dev/null bs=2M count=64 iflag=direct 134217728 bytes (134 MB) copied, 3.94955 s, 34.0 MB/s Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25libata-eh set tf flags in NCQ EH result_tfMark Lord
Fix mis-reporting of NCQ errors by ensuring that result_tf->flags is properly initialized in libata-eh. This allows ata_gen_ata_sense() to report the failed block number correctly to SCSI after a media error during NCQ. This patch may also be a candidate for backporting to earlier kernels. Without this fix, SCSI will fail I/O on the entire request rather than just the bad sector. That can be bad for a request that was merged from many independent read reads from different tasks. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25make sata_set_spd_needed() staticAdrian Bunk
sata_set_spd_needed() can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25make sata_print_link_status() staticAdrian Bunk
sata_print_link_status() can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25libata-acpi.c: remove unneeded #if'sAdrian Bunk
These #if's are unneeded since they: - did anyway not handle the CONFIG_ACPI_DOCK_MODULE case correctly and - this is already handled in include/acpi/acpi_drivers.h and - it's now correctly handled in kconfig. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25sata_nv: make hardreset return -EAGAIN on successTejun Heo
sata_nv hardreset can't classify but was left out while unifying follow-up SRST request mechanism[1]. This caused detection failures on those controllers. Fix it. Reported and bisected by Roland Dreier, Petr Vandrovec and Marc Dionne. Thanks guys. [1] 305d2a1ab137d11d573319c315748a87060fe82d Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Petr Vandrovec <vandrove@vc.cvut.cz> Cc: Marc Dionne <marc.c.dionne@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25ahci: retry enabling AHCI a few times before spitting out WARN_ON()Tejun Heo
Some chips need AHCI_EN set more than once to actually set it. Try a few times before giving up and spitting out WARN_ON(). Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Peer Chen <pchen@nvidia.com> Cc: Volker Armin Hemmann <volker.armin.hemmann@tu-clausthal.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25libata: make WARN_ON conditions in ata_sff_hsm_move() more strictTejun Heo
WARN_ON()'s in ata_hsm_move() was too liberal and got triggerred when it shouldn't (e.g. hotplug events at the right moment). As the HSM only deals with device errors and state machine violations, make it check only against them. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <liml@rtr.ca> Cc: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25ATA/IDE: fix platform driver hotplug/coldplugKay Sievers
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable ATA and IDE platform drivers, to re-enable auto loading. NOTE: both ata/pata_platform.c and ide/legacy/ide_platform.c claim to provide "the" platform_pata driver, and there's no build-time mutual exclusion mechanism. This means that configs which enable both drivers will make some trouble when hotplugging... [dbrownell@users.sourceforge.net: more drivers, registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Tejun Heo <htejun@gmail.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-24sata_sis: SCR accessors return -EINVAL when requested SCR isn't availableTejun Heo
sis_scr_cfg_read() can't access SError and was incorrectly returning -1 instead of -EINVAL. This went unnoticed because SError used to be cleared in @postreset() and it didn't care about how scr_read() failed but commit ac371987 moved SError clearing into sata_link_resume() and SCR access failure other than -EINVAL is considered an error condition and exposes the incorrect return value bug as detection failure. Fix it. Also, scsi_scr_cfg_write() was incorrectly returning 0 after it ignored the request to write to SError. Make it also return -EINVAL. This was bisected and reported by Patrick McHardy. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-24libata: functions with definition should not be externHarvey Harrison
Noticed by sparse drivers/ata/libata-core.c:3380:12: warning: function 'ata_wait_after_reset' with external linkage has definition Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits) SCSI: convert struct class_device to struct device DRM: remove unused dev_class IB: rename "dev" to "srp_dev" in srp_host structure IB: convert struct class_device to struct device memstick: convert struct class_device to struct device driver core: replace remaining __FUNCTION__ occurrences sysfs: refill attribute buffer when reading from offset 0 PM: Remove destroy_suspended_device() Firmware: add iSCSI iBFT Support PM: Remove legacy PM (fix) Kobject: Replace list_for_each() with list_for_each_entry(). SYSFS: Explicitly include required header file slab.h. Driver core: make device_is_registered() work for class devices PM: Convert wakeup flag accessors to inline functions PM: Make wakeup flags available whenever CONFIG_PM is set PM: Fix misuse of wakeup flag accessors in serial core Driver core: Call device_pm_add() after bus_add_device() in device_add() PM: Handle device registrations during suspend/resume block: send disk "change" event for rescan_partitions() sysdev: detect multiple driver registrations ... Fixed trivial conflict in include/linux/memory.h due to semaphore header file change (made irrelevant by the change to mutex).
2008-04-21Merge branch 'semaphore' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc * 'semaphore' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: Deprecate the asm/semaphore.h files in feature-removal-schedule. Convert asm/semaphore.h users to linux/semaphore.h security: Remove unnecessary inclusions of asm/semaphore.h lib: Remove unnecessary inclusions of asm/semaphore.h kernel: Remove unnecessary inclusions of asm/semaphore.h include: Remove unnecessary inclusions of asm/semaphore.h fs: Remove unnecessary inclusions of asm/semaphore.h drivers: Remove unnecessary inclusions of asm/semaphore.h net: Remove unnecessary inclusions of asm/semaphore.h arch: Remove unnecessary inclusions of asm/semaphore.h
2008-04-19SCSI: convert struct class_device to struct deviceTony Jones
It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19Merge branch 'merge-fixes' into develRussell King
2008-04-19Merge branch 'omap2-upstream' into develRussell King
2008-04-18drivers: Remove unnecessary inclusions of asm/semaphore.hMatthew Wilcox
None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have fix any build failures as they come up. Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (137 commits) [SCSI] iscsi: bidi support for iscsi_tcp [SCSI] iscsi: bidi support at the generic libiscsi level [SCSI] iscsi: extended cdb support [SCSI] zfcp: Fix error handling for blocked unit for send FCP command [SCSI] zfcp: Remove zfcp_erp_wait from slave destory handler to fix deadlock [SCSI] zfcp: fix 31 bit compile warnings [SCSI] bsg: no need to set BSG_F_BLOCK bit in bsg_complete_all_commands [SCSI] bsg: remove minor in struct bsg_device [SCSI] bsg: use better helper list functions [SCSI] bsg: replace kobject_get with blk_get_queue [SCSI] bsg: takes a ref to struct device in fops->open [SCSI] qla1280: remove version check [SCSI] libsas: fix endianness bug in sas_ata [SCSI] zfcp: fix compiler warning caused by poking inside new semaphore (linux-next) [SCSI] aacraid: Do not describe check_reset parameter with its value [SCSI] aacraid: Fix down_interruptible() to check the return value [SCSI] sun3_scsi_vme: add MODULE_LICENSE [SCSI] st: rename flush_write_buffer() [SCSI] tgt: use KMEM_CACHE macro [SCSI] initio: fix big endian problems for auto request sense ...
2008-04-18libata: fix boot panic with SATAPI devices on non-SFF HBAsJames Bottomley
The kernel now panics reliably on boot if you have a SATAPI device connected. The problem was introduced by the libata merge trying to pull out all the SFF code into a separate module. Unfortunately, if you're a satapi device you usually need to call atapi_request_sense, which has a bare invocation of a SFF callback which is NULL on non-SFF HBAs. Fix this by making the call conditional. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-17ata-acpi: don't call _GTF for disabled driveShaohua Li
I got below log after a S3 resume in a ASUS A6VC laptop. The system has only one IDE drive. It appears there is no reason calling _GTF for disabled drive. ACPI Error (dsopcode-0483): Attempt to CreateField of length zero [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node df822a7c), AE_AML_OPERAND_VALUE ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node df822bd0), AE_AML_OPERAND_VALUE ata2.00: _GTF evaluation failed (AE 0x3006) ACPI Error (dsopcode-0483): Attempt to CreateField of length zero [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node df822a7c), AE_AML_OPERAND_VALUE ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV1._GTF] (Node df822b94), AE_AML_OPERAND_VALUE ata2.01: _GTF evaluation failed (AE 0x3006) Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-17sata_mv add temporary 3 second init delay for SiliconImage PMsMark Lord
sata_mv does not yet fully support hotplug (coming soon, though). This means that the driver may not find a Silicon Image port-multiplier when first loaded, because those devices take in exceess of 3 seconds to sync up the SATA PHY (most devices do this in mere microseconds). So, as a short-term interim measure, here we insert a 3-second pause on initial driver load, once per controller board (not once per port!), to allow the Silicon Image port-multipliers to be detected later. This will be removed again (soon!) once hotplug is fully implemented/working. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-17sata_mv remove redundant edma init codeMark Lord
Remove unnecessary edma init code from port_start. This sequence gets done later on the first I/O to the port. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-17sata_mv add basic port multiplier supportMark Lord
Add basic port-multiplier support to sata_mv. This works in Command-based-switching mode for Gen-II chipsets, and in FIS-based-switching mode for Gen-IIe chipsets. Error handling remains at the primary port level for now (works okay, but not great). This will get fixed in a subsequent patch series for IRQ/EH handling fixes. There are also some known NCQ/PMP errata to be dealt with in the near future, once we have this basic PMP support in place. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-17sata_mv fix SOC flags, enable NCQ on SOCMark Lord
The System-On-Chip (SOC) core supports all of the same features as the other recent Marvell chips, including NCQ and IRQ coalescing. Fix the chip_soc flags to enable these capabilities (note that the driver currently does nothing special for IRQ coalescing, though). Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-17sata_mv disable hotplug for nowMark Lord
Disable hot plug/unplug detection in sata_mv for now. It is currently broken, and also interferes with PMP support. This will get fixed in a subsequent patch series. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-17sata_mv cosmeticsMark Lord
More cosmetic cleanups to unclutter the changes needed for PMP support. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-17sata_mv hardreset reworkMark Lord
Rework and simplify sata_mv's hardreset code to take advantage of libata improvements since it was first coded. Also, get rid of the now unnecessary prereset, postreset, and phy_reset functions. This patch also paves the way for subsequent pmp support patches, which will follow once this one passes muster. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-17[libata] improve Kconfig help text for new PMP, SFF optionsJeff Garzik
2008-04-17libata: make EH fail gracefully if no reset method is availableTejun Heo
When no reset method is available, libata currently oopses. Although the condition can't happen unless there's a bug in a low level driver, oopsing isn't the best way to report the error condition. Complain, dump stack and fail reset instead. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-17libata: Be a bit more slack about early devicesAlan Cox
We have a certain number of 'ATA' emulations often on CF or other flash devices that are at best "loosely based" on the CF 1.1 standard. These devices report themselves as disk but don't support the ATA minimal command set only the CF 1.1 set. Relax the PIO checking for devices reporting ATA rev 0, or no iordy support, or CFA. Rework the code a bit as it was already messy and this made it quite ugly. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-17libata: cable logicAlan Cox
The cable detect isolation patch inadvertently removed 40 wire short cable handling. Put it back Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>