summaryrefslogtreecommitdiffstats
path: root/drivers/ata
AgeCommit message (Collapse)Author
2011-04-24libata: ahci_start_engine compliant to AHCI specJian Peng
At the end of section 10.1 of AHCI spec (rev 1.3), it states Software shall not set PxCMD.ST to 1 until it is determined that a functoinal device is present on the port as determined by PxTFD.STS.BSY=0, PxTFD.STS.DRQ=0 and PxSSTS.DET=3h Even though most AHCI host controller works without this check, specific controller will fail under this condition. Signed-off-by: Jian Peng <jipeng2005@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24ata: pata_at91.c bugfix for initial_timing initialisationIgor Plyatov
The "struct ata_timing" must contain 10 members, but ".dmack_hold" member was forgotten for "initial_timing" initialisation. This patch fixes such a problem. Signed-off-by: Igor Plyatov <plyatov@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24ata: pata_at91.c bugfix for high master clockIgor Plyatov
The AT91SAM9 microcontrollers with master clock higher then 105 MHz and PIO0, have overflow of the NCS_RD_PULSE value in the MSB. This lead to "NCS_RD_PULSE" pulse longer then "NRD_CYCLE" pulse and driver does not detect ATA device. Signed-off-by: Igor Plyatov <plyatov@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24ahci: AHCI-mode SATA patch for Intel Panther Point DeviceIDsSeth Heasley
The previously submitted patch was word-wrapped. This patch adds the AHCI-mode SATA DeviceIDs for the Intel Panther Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24ata_piix: IDE-mode SATA patch for Intel Panther Point DeviceIDsSeth Heasley
The previously submitted patch was word-wrapped. This patch adds the IDE-mode SATA DeviceIDs for the Intel Panther Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24libata: Pioneer DVR-216D can't do SETXFERJeff Mahoney
Commit 4a5610a04d415ed94af75bb1159d2621d62c8328 fixed an issue with the Pioneer DVR-212D not handling SETXFER correctly. An openSUSE user reported a similar issue with his DVR-216D that the NOSETXFER horkage worked around for him as well. This patch adds the DVR-216D (1.08) to the horkage list for NOSETXFER. The issue was reported at: https://bugzilla.novell.com/show_bug.cgi?id=679143 Reported-by: Volodymyr Kyrychenko <vladimir.kirichenko@gmail.com> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24ahci: don't enable port irq before handler is registeredMaxime Bizon
The ahci_pmp_attach() & ahci_pmp_detach() unmask port irqs, but they are also called during port initialization, before ahci host irq handler is registered. On ce4100 platform, this sometimes triggers "irq 4: nobody cared" message when loading driver. Fixed this by not touching the register if the port is in frozen state, and mark all uninitialized port as frozen. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Acked-by: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24libata: Implement ATA_FLAG_NO_DIPM and apply it to mcp65Tejun Heo
NVIDIA mcp65 familiy of controllers cause command timeouts when DIPM is used. Implement ATA_FLAG_NO_DIPM and apply it. This problem was reported by Stefan Bader in the following thread. http://thread.gmane.org/gmane.linux.ide/48841 stable: applicable to 2.6.37 and 38. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Stefan Bader <stefan.bader@canonical.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24ahci: EM supported message type sysfs attributeHannes Reinecke
This patch adds an sysfs attribute 'em_message_supported' to the ahci host device which prints out the supported enclosure management message types. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-30Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (65 commits) ARM: 6826/1: Merge v6 and v7 DEBUG_LL DCC support ARM: 6838/1: etm: fix section mismatch warning ARM: 6837/1: remove unused pci_fixup_prpmc1100 ARM: 6836/1: kprobes/fix emulation of LDR/STR instruction when Rn == PC Fix the broken build for Marvell Dove platform. ARM: 6835/1: perf: ensure overflows aren't missed due to IRQ latency ARM: 6834/1: perf: reset counters on all CPUs during initialisation ARM: 6833/1: perf: add required isbs() to ARMv7 backend ARM: 6825/1: kernel/sleep.S: fix Thumb2 compilation issues ARM: 6807/1: realview: Fix secondary GIC initialisation for EB with MPCore tile arm: mach-mx3: pcm043: add write-protect and card-detect for SD1 eukrea_mbimxsd51: add SD Card detect eukrea_mbimxsd25-baseboard: add SD card detect mx3/eukrea_mbimxsd-baseboard: add SD card detect support mx3/eukrea_mbimxsd-baseboard: fix gpio request ARM: mxs/mx28evk: add mmc device ARM: mxs/mx23evk: add mmc device ARM: mxs: dynamically allocate mmc device ARM: mx51_efika: update platform data for new mfd changes mx2/iomux: Set direction for CSPI2 pins ...
2011-03-29drivers: Final irq namespace conversionThomas Gleixner
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-26Merge branch 'devel' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable Conflicts: arch/arm/mach-pxa/tosa.c
2011-03-18Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (62 commits) powerpc/85xx: Fix signedness bug in cache-sram powerpc/fsl: 85xx: document cache sram bindings powerpc/fsl: define binding for fsl mpic interrupt controllers powerpc/fsl_msi: Handle msi-available-ranges better drivers/serial/ucc_uart.c: Add of_node_put to avoid memory leak powerpc/85xx: Fix SPE float to integer conversion failure powerpc/85xx: Update sata controller compatible for p1022ds board ATA: Add FSL sata v2 controller support powerpc/mpc8xxx_gpio: simplify searching for 'fsl, qoriq-gpio' compatiable powerpc/8xx: remove obsolete mgsuvd board powerpc/82xx: rename and update mgcoge board support powerpc/83xx: rename and update kmeter1 powerpc/85xx: Workaroudn e500 CPU erratum A005 powerpc/fsl_pci: Add support for FSL PCIe controllers v2.x powerpc/85xx: Fix writing to spin table 'cpu-release-addr' on ppc64e powerpc/pseries: Disable MSI using new interface if possible powerpc: Enable GENERIC_HARDIRQS_NO_DEPRECATED. powerpc: core irq_data conversion. powerpc: sysdev/xilinx_intc irq_data conversion. powerpc: sysdev/uic irq_data conversion. ... Fix up conflicts in arch/powerpc/sysdev/fsl_msi.c (due to getting rid of of_platform_driver in arch/powerpc)
2011-03-16Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits) tty: serial: altera_jtaguart: Add device tree support tty: serial: altera_uart: Add devicetree support dt: eliminate of_platform_driver shim code dt: Eliminate of_platform_{,un}register_driver dt/serial: Eliminate users of of_platform_{,un}register_driver dt/usb: Eliminate users of of_platform_{,un}register_driver dt/video: Eliminate users of of_platform_{,un}register_driver dt/net: Eliminate users of of_platform_{,un}register_driver dt/sound: Eliminate users of of_platform_{,un}register_driver dt/spi: Eliminate users of of_platform_{,un}register_driver dt: uartlite: merge platform and of_platform driver bindings dt: xilinx_hwicap: merge platform and of_platform driver bindings ipmi: convert OF driver to platform driver leds/leds-gpio: merge platform_driver with of_platform_driver dt/sparc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: move of_bus_type infrastructure to ibmebus drivercore/dt: add a match table pointer to struct device dt: Typo fix. altera_ps2: Add devicetree support ...
2011-03-16ARM: pxa: Use gpio arrays in palmld_hdd driverMarek Vasut
Use gpio_request_array() / gpio_free_array(), this makes the code cleaner and less error prone. This patch also properly frees GPIOs in case ata_host_activate() call fails. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2011-03-15ATA: Add FSL sata v2 controller supportXulei
In FSL sata v2 block, the snoop bit of PRDT Word3 description information is at bit28 instead of bit22. This patch adds FSL sata v2 probe and resolve this difference. Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-03-15ahci: add another PCI ID for marvellTejun Heo
1b4b:91a3 seems to be another PCI ID for marvell ahci. Add it. Reported and tested in the following thread. http://thread.gmane.org/gmane.linux.kernel/1068354 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Borislav Petkov <bp@alien8.de> Reported-by: Alessandro Tagliapietra <tagliapietra.alessandro@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-14sata_fsl: Update RX_WATER_MARK for TRANSCFGPrabhakar Kushwaha
RX_WATER_MARK sets the number of locations in Rx FIFO that can be used before the transport layer instructs the link layer to transmit HOLDS. Note that it can take some time for the HOLDs to get to the other end, and that in the interim there must be enough room in the FIFO to absorb all data that could arrive. Update the new recommended value to 16. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-14sata_fsl: Fix wrong Device Error Register usagePrabhakar Kushwaha
When a single device error is detected, the device under the error is indicated by the error bit set in the DER. There is a one to one mapping between register bit and devices on Port multiplier(PMP) i.e. bit 0 represents PMP device 0 and bit 1 represents PMP device 1 etc. Current implementation treats Device error register value as device number not set of bits representing multiple device on PMP. It is changed to consider bit level. No need to check for each set bit as all command is going to be aborted. Signed-off-by: Ashish Kalra <B00888@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-14libata: Include WWN ID in inquiry VPD emulationHannes Reinecke
As per SAT-3 the WWN ID should be included in the VPD page 0x83 (device identification) emulation. Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-14ata/pata_arasan_cf: fill dma chan->private from pdata->dma_privViresh Kumar
Some DMA controllers (eg: drivers/dma/dw_dmac*) allow platform specific configuration for dma transfers. User drivers need to set chan->private field of channel with pointer to configuration data. This patch takes dma_priv data from platform data and passes it to chan->private_data, in order to pass platform specific configuration to DMAC controller. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-14ata: pata: Convert pr_*(DRV_NAME ...) to pr_fmt/pr_<level>Joe Perches
Commit 40d69ba029c8d5de51aaeb5358999266c482d00a ("pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...)") used pr_<level>. Add #define pr_fmt and remove DRV_NAME. Increment driver version numbers. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-14pata_arasan_cf: fix printk format string warningJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-14pata_arasan_cf: Adding support for arasan compact flash host controllerViresh Kumar
The Arasan CompactFlash Device Controller has three basic modes of operation: PC card ATA using I/O mode, PC card ATA using memory mode, PC card ATA using true IDE modes. Currently driver supports only True IDE mode. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-14libata-sff: add ata_sff_queue_work() & ata_sff_queue_delayed_work()Viresh Kumar
This patch adds ata_sff_queue_work() & ata_sff_queue_delayed_work() routine in libata-sff.c file. This routine can be used by ata drivers to use ata_sff_wq. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-14ahci: AHCI mode SATA patch for Intel Patsburg SATA RAID controllerSeth Heasley
This patch adds an updated SATA RAID DeviceID for the Intel Patsburg PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-03-02ahci: recognize Marvell 88se9125 PCIe SATA 6.0 Gb/s controllerPer Jessen
Recognize Marvell 88SE9125 PCIe SATA 6.0 Gb/s controller. Signed-off-by: Per Jessen <per@computer.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: remove ATA_FLAG_LPMSergei Shtylyov
Commit 6b7ae9545ad9875a289f4191c0216b473e313cb9 (libata: reimplement link power management) removed the check of ATA_FLAG_LPM but neglected to remove the flag itself. Do it now... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: remove ATA_FLAG_NO_LEGACYSergei Shtylyov
All checks of ATA_FLAG_NO_LEGACY have been removed by the commits c791c30670ea61f19eec390124128bf278e854fe ([libata] minor PCI IDE probe fixes and cleanups) and f0d36efdc624beb3d9e29b9ab9e9537bf0f25d5b (libata: update libata core layer to use devres), so I think it's time to finally get rid of this flag... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: remove ATA_FLAG_MMIOSergei Shtylyov
Commit 0d5ff566779f894ca9937231a181eb31e4adff0e (libata: convert to iomap) removed all checks of ATA_FLAG_MMIO but neglected to remove the flag itself. Do it now, at last... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: remove ATA_FLAG_{SRST|SATA_RESET}Sergei Shtylyov
These flags are marked as obsolete and the checks for them have been removed by commit 294440887b32c58d220fb54b73b7a58079b78f20 (libata-sff: kill unused ata_bus_reset()), so I think it's time to finally get rid of them... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02sata_dwc_460ex: add debugging optionsSergei Shtylyov
The driver makes use of the two options (CONFIG_SATA_DWC_[V]DEBUG) to enable the debug output but they both are absent in drivers/ata/Kconfig... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02sata_dwc_460ex: fix misuse of ata_get_cmd_descript()Sergei Shtylyov
The driver erroneously uses ata_get_cmd_descript() not only for printing out the ATA commands but also the protocol and DMA direction enums. Add functions for properly printing those out... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02sata_dwc_460ex: fix return value of dma_dwc_xfer_setup()Sergei Shtylyov
The caller expects this function to return the DMA channel number on success, while it returns 0... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02sata_dwc_460ex: fix compilation errors/warningsSergei Shtylyov
Fix the following compilation errors/warnings: drivers/ata/sata_dwc_460ex.c:43:1: warning: "DRV_NAME" redefined In file included from drivers/ata/sata_dwc_460ex.c:38: drivers/ata/libata.h:31:1: warning: this is the location of the previous definition drivers/ata/sata_dwc_460ex.c:44:1: warning: "DRV_VERSION" redefined drivers/ata/libata.h:32:1: warning: this is the location of the previous definition drivers/ata/sata_dwc_460ex.c: In function `sata_dwc_exec_command_by_tag': drivers/ata/sata_dwc_460ex.c:1356: warning: passing argument 1 of `ata_get_cmd_descript' makes integer from pointer without a cast drivers/ata/sata_dwc_460ex.c: In function `sata_dwc_qc_issue': drivers/ata/sata_dwc_460ex.c:1476: warning: `err' is used uninitialized in this function drivers/ata/sata_dwc_460ex.c:1465: note: `err' was declared here drivers/ata/sata_dwc_460ex.c: In function `sata_dwc_qc_issue': drivers/ata/sata_dwc_460ex.c:1493: warning: passing argument 1 of `ata_get_cmd_descript' makes integer from pointer without a cast drivers/ata/sata_dwc_460ex.c: In function `sata_dwc_qc_prep': drivers/ata/sata_dwc_460ex.c:1537: error: `tag' undeclared (first use in this function) drivers/ata/sata_dwc_460ex.c:1537: error: (Each undeclared identifier is reported only once drivers/ata/sata_dwc_460ex.c:1537: error: for each function it appears in.) NB: error only happens if DEBUG_NCQ macro is defined... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02sata_dwc_460ex: use ATA_PIO4Sergei Shtylyov
Somehow the driver was committed with a bare number for the PIO mask, instead of ATA_PIO4... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02[libata] trivial: trim trailing whitespace for drivers/ata/*.[ch]Jeff Garzik
2011-03-02libata: separate error handler into usable componentsJames Bottomley
Right at the moment, the libata error handler is incredibly monolithic. This makes it impossible to use from composite drivers like libsas and ipr which have to handle error themselves in the first instance. The essence of the change is to split the monolithic error handler into two components: one which handles a queue of ata commands for processing and the other which handles the back end of readying a port. This allows the upper error handler fine grained control in calling libsas functions (and making sure they only get called for ATA commands whose lower errors have been fixed up). Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: fix eh lockingJames Bottomley
The SCSI host eh_cmd_q should be protected by the host lock (not the port lock). This probably doesn't matter that much at the moment, since we try to serialise the add and eh pieces, but it might matter in future for more convenient error handling. Plus this switches libata to the standard eh pattern where you lock, remove from the cmd queue to a local list and unlock and then operate on the local list. Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: fix locking for sas pathsJames Bottomley
For historical reasons, libsas uses the scsi host lock as the ata port lock, and libata always uses the ata host. For the old eh, this was largely irrelevant since the two locks were never mixed inside the code. However, the new eh has a case where it nests acquisition of the host lock inside the port lock (this does look rather deadlock prone). Obviously this would be an instant deadlock if the port lock were the host lock, so switch the libsas paths to use the ata host lock as well. Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: plumb sas port scan into standard libata pathsJames Bottomley
The function ata_sas_port_init() has always really done its own thing. However, as a precursor to moving to the libata new eh, it has to be properly using the standard libata scan paths. This means separating the current libata scan paths into pieces which can be shared with libsas and pieces which cant (really just the async call and the host scan). Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-03-02libata: fix hotplug for drivers which don't implement LPMTejun Heo
ata_eh_analyze_serror() suppresses hotplug notifications if LPM is being used because LPM generates spurious hotplug events. It compared whether link->lpm_policy was different from ATA_LPM_MAX_POWER to determine whether LPM is enabled; however, this is incorrect as for drivers which don't implement LPM, lpm_policy is always ATA_LPM_UNKNOWN. This disabled hotplug detection for all drivers which don't implement LPM. Fix it by comparing whether lpm_policy is greater than ATA_LPM_MAX_POWER. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-02-28dt: Eliminate of_platform_{,un}register_driverGrant Likely
Final step to eliminate of_platform_bus_type. They're all just platform drivers now. v2: fix type in pasemi_nand.c (thanks to Stephen Rothwell) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-28libata: set queue DMA alignment to sector size for ATAPI tooTejun Heo
ata_pio_sectors() expects buffer for each sector to be contained in a single page; otherwise, it ends up overrunning the first page. This is achieved by setting queue DMA alignment. If sector_size is smaller than PAGE_SIZE and all buffers are sector_size aligned, buffer for each sector is always contained in a single page. This wasn't applied to ATAPI devices but IDENTIFY_PACKET is executed as ATA_PROT_PIO and thus uses ata_pio_sectors(). Newer versions of udev issue IDENTIFY_PACKET with unaligned buffer triggering the problem and causing oops. This patch fixes the problem by setting sdev->sector_size to ATA_SECT_SIZE on ATATPI devices and always setting DMA alignment to sector_size. While at it, add a warning for the unlikely but still possible scenario where sector_size is larger than PAGE_SIZE, in which case the alignment wouldn't be enough. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: John Stanley <jpsinthemix@verizon.net> Tested-by: John Stanley <jpsinthemix@verizon.net> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-28libata: DVR-212D can't do SETXFER DVD-RW DVR-212DFrancesco Antonacci
PIONEER DVR-212D can't do SETXFER like its sibling DVRTD08. Add ATA_HORKAGE_NOSETXFER for it. Reported in bko#27502. https://bugzilla.kernel.org/show_bug.cgi?id=27502 Signed-off-by: Francesco Antonacci <fraanto@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-28ahci: add HFLAG_YES_FBS and apply it to 88SE9128Anssi Hannula
Commit 5f173107ecad83a50 added HFLAG_YES_FBS workaround for 88SE9128 (1b4b:9123). However, that change inadvertently caused the legacy IDE interface of the controller (with the same pci id) to become associated with the AHCI driver as well, causing the driver to try to bring the interface up in vain. Fix that by matching against class as well. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-28pata_hpt37x: inherit prereset() method for HPT374Sergei Shtylyov
Commit ab81a505ae6be069be5b67acd7e1bab3cfb53968 (pata_hpt37x: unify ->pre_reset methods) neglected to remove the initializer for the prereset() method from 'hpt374_fn1_port_ops' (it's inherited from 'hpt372_port_ops' anyway), as well as to update the comment in hpt37x_init_one()... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-28ahci: AHCI mode SATA patch for Intel DH89xxCC DeviceIDsSeth Heasley
This patch adds the AHCI-mode SATA DeviceID for the Intel DH89xxCC PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-28pata_hpt37x: fold 'if' statement into 'switch'Sergei Shtylyov
hpt37x_init_one() has a large *if* statement which should really be folded into the *switch* statement that currently constitutes its *else* branch, reducing one level of indentation... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-29 00:35:32 +0000