summaryrefslogtreecommitdiffstats
path: root/drivers/base/Makefile
AgeCommit message (Collapse)Author
2014-01-24Merge tag 'pm+acpi-3.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "As far as the number of commits goes, the top spot belongs to ACPI this time with cpufreq in the second position and a handful of PM core, PNP and cpuidle updates. They are fixes and cleanups mostly, as usual, with a couple of new features in the mix. The most visible change is probably that we will create struct acpi_device objects (visible in sysfs) for all devices represented in the ACPI tables regardless of their status and there will be a new sysfs attribute under those objects allowing user space to check that status via _STA. Consequently, ACPI device eject or generally hot-removal will not delete those objects, unless the table containing the corresponding namespace nodes is unloaded, which is extremely rare. Also ACPI container hotplug will be handled quite a bit differently and cpufreq will support CPU boost ("turbo") generically and not only in the acpi-cpufreq driver. Specifics: - ACPI core changes to make it create a struct acpi_device object for every device represented in the ACPI tables during all namespace scans regardless of the current status of that device. In accordance with this, ACPI hotplug operations will not delete those objects, unless the underlying ACPI tables go away. - On top of the above, new sysfs attribute for ACPI device objects allowing user space to check device status by triggering the execution of _STA for its ACPI object. From Srinivas Pandruvada. - ACPI core hotplug changes reducing code duplication, integrating the PCI root hotplug with the core and reworking container hotplug. - ACPI core simplifications making it use ACPI_COMPANION() in the code "glueing" ACPI device objects to "physical" devices. - ACPICA update to upstream version 20131218. This adds support for the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug facilities. From Bob Moore, Lv Zheng and Betty Dall. - Init code change to carry out the early ACPI initialization earlier. That should allow us to use ACPI during the timekeeping initialization and possibly to simplify the EFI initialization too. From Chun-Yi Lee. - Clenups of the inclusions of ACPI headers in many places all over from Lv Zheng and Rashika Kheria (work in progress). - New helper for ACPI _DSM execution and rework of the code in drivers that uses _DSM to execute it via the new helper. From Jiang Liu. - New Win8 OSI blacklist entries from Takashi Iwai. - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria, Tang Chen, Zhang Rui. - intel_pstate driver updates, including proper Baytrail support, from Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra. - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski. - powernow-k6 cpufreq driver fixes from Mikulas Patocka. - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown. - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar. - cpuidle cleanups from Bartlomiej Zolnierkiewicz. - Support for hibernation APM events from Bin Shi. - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled during thaw transitions from Bjørn Mork. - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson. - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa, Rashika Kheria. - New tool for profiling system suspend from Todd E Brandt and a cpupower tool cleanup from One Thousand Gnomes" * tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits) thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412) cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ Documentation: cpufreq / boost: Update BOOST documentation cpufreq: exynos: Extend Exynos cpufreq driver to support boost cpufreq / boost: Kconfig: Support for software-managed BOOST acpi-cpufreq: Adjust the code to use the common boost attribute cpufreq: Add boost frequency support in core intel_pstate: Add trace point to report internal state. cpufreq: introduce cpufreq_generic_get() routine ARM: SA1100: Create dummy clk_get_rate() to avoid build failures cpufreq: stats: create sysfs entries when cpufreq_stats is a module cpufreq: stats: free table and remove sysfs entry in a single routine cpufreq: stats: remove hotplug notifiers cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly cpufreq: speedstep: remove unused speedstep_get_state platform: introduce OF style 'modalias' support for platform bus PM / tools: new tool for suspend/resume performance optimization ACPI: fix module autoloading for ACPI enumerated devices ACPI: add module autoloading support for ACPI enumerated devices ACPI: fix create_modalias() return value handling ...
2014-01-10drivers/base: provide an infrastructure for componentised subsystemsRussell King
Subsystems such as ALSA, DRM and others require a single card-level device structure to represent a subsystem. However, firmware tends to describe the individual devices and the connections between them. Therefore, we need a way to gather up the individual component devices together, and indicate when we have all the component devices. We do this in DT by providing a "superdevice" node which specifies the components, eg: imx-drm { compatible = "fsl,drm"; crtcs = <&ipu1>; connectors = <&hdmi>; }; The superdevice is declared into the component support, along with the subcomponents. The superdevice receives callbacks to locate the subcomponents, and identify when all components are present. At this point, we bind the superdevice, which causes the appropriate subsystem to be initialised in the conventional way. When any of the components or superdevice are removed from the system, we unbind the superdevice, thereby taking the subsystem down. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-29ACPI / hotplug / driver core: Handle containers in a special wayRafael J. Wysocki
ACPI container devices require special hotplug handling, at least on some systems, since generally user space needs to carry out system-specific cleanup before it makes sense to offline devices in the container. However, the current ACPI hotplug code for containers first attempts to offline devices in the container and only then it notifies user space of the container offline. Moreover, after commit 202317a573b2 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace), ACPI device objects representing containers are present as long as the ACPI namespace nodes corresponding to them are present, which may be forever, even if the container devices are physically detached from the system (the return values of the corresponding _STA methods change in those cases, but generally the namespace nodes themselves are still there). Thus it is useful to introduce entities representing containers that will go away during container hot-unplug. The goal of this change is to address both the above issues. The idea is to create a "companion" container system device for each of the ACPI container device objects during the initial namespace scan or on a hotplug event making the container present. That system device will be unregistered on container removal. A new bus type for container devices is added for this purpose, because device offline and online operations need to be defined for them. The online operation is a trivial function that is always successful and the offline uses a callback pointed to by the container device's offline member. For ACPI containers that callback simply walks the list of ACPI device objects right below the container object (its children) and checks if all of their physical companion devices are offline. If that's not the case, it returns -EBUSY and the container system devivce cannot be put offline. Consequently, to put the container system device offline, it is necessary to put all of the physical devices depending on its ACPI companion object offline beforehand. Container system devices created for ACPI container objects are initially online. They are created by the container ACPI scan handler whose hotplug.demand_offline flag is set. That causes acpi_scan_hot_remove() to check if the companion container system device is offline before attempting to remove an ACPI container or any devices below it. If the check fails, a KOBJ_CHANGE uevent is emitted for the container system device in question and user space is expected to offline all devices below the container and the container itself in response to it. Then, user space can finalize the removal of the container with the help of its ACPI device object's eject attribute in sysfs. Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29Merge remote-tracking branch 'origin/next' into kvm-ppc-nextAlexander Graf
Conflicts: mm/Kconfig CMA DMA split and ZSWAP introduction were conflicting, fix up manually.
2013-07-02mm/cma: Move dma contiguous changes into a seperate configAneesh Kumar K.V
We want to use CMA for allocating hash page table and real mode area for PPC64. Hence move DMA contiguous related changes into a seperate config so that ppc64 can enable CMA without requiring DMA contiguous. Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [removed defconfig changes] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2013-06-28reservation: cross-device reservation support, v4Maarten Lankhorst
This adds support for a generic reservations framework that can be hooked up to ttm and dma-buf and allows easy sharing of reservations across devices. The idea is that a dma-buf and ttm object both will get a pointer to a struct reservation_object, which has to be reserved before anything is done with the contents of the dma-buf. Changes since v1: - Fix locking issue in ticket_reserve, which could cause mutex_unlock to be called too many times. Changes since v2: - All fence related calls and members have been taken out for now, what's left is the bare minimum to be useful for ttm locking conversion. Changes since v3: - Removed helper functions too. The documentation has an example implementation for locking. With the move to ww_mutex there is no need to have much logic any more. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-01-23drivers/pinctrl: grab default handles from device coreLinus Walleij
This makes the device core auto-grab the pinctrl handle and set the "default" (PINCTRL_STATE_DEFAULT) state for every device that is present in the device model right before probe. This will account for the lion's share of embedded silicon devcies. A modification of the semantics for pinctrl_get() is also done: previously if the pinctrl handle for a certain device was already taken, the pinctrl core would return an error. Now, since the core may have already default-grabbed the handle and set its state to "default", if the handle was already taken, this will be disregarded and the located, previously instanitated handle will be returned to the caller. This way all code in drivers explicitly requesting their pinctrl handlers will still be functional, and drivers that want to explicitly retrieve and switch their handles can still do that. But if the desired functionality is just boilerplate of this type in the probe() function: struct pinctrl *p; p = devm_pinctrl_get_select_default(&dev); if (IS_ERR(p)) { if (PTR_ERR(p) == -EPROBE_DEFER) return -EPROBE_DEFER; dev_warn(&dev, "no pinctrl handle\n"); } The discussion began with the addition of such boilerplate to the omap4 keypad driver: http://marc.info/?l=linux-input&m=135091157719300&w=2 A previous approach using notifiers was discussed: http://marc.info/?l=linux-kernel&m=135263661110528&w=2 This failed because it could not handle deferred probes. This patch alone does not solve the entire dilemma faced: whether code should be distributed into the drivers or if it should be centralized to e.g. a PM domain. But it solves the immediate issue of the addition of boilerplate to a lot of drivers that just want to grab the default state. As mentioned, they can later explicitly retrieve the handle and set different states, and this could as well be done by e.g. PM domains as it is only related to a certain struct device * pointer. ChangeLog v4->v5 (Stephen): - Simplified the devicecore grab code. - Deleted a piece of documentation recommending that pins be mapped to a device rather than hogged. ChangeLog v3->v4 (Linus): - Drop overzealous NULL checks. - Move kref initialization to pinctrl_create(). - Seeking Tested-by from Stephen Warren so we do not disturb the Tegra platform. - Seeking ACK on this from Greg (and others who like it) so I can merge it through the pinctrl subsystem. ChangeLog v2->v3 (Linus): - Abstain from using IS_ERR_OR_NULL() in the driver core, Russell recently sent a patch to remove it. Handle the NULL case explicitly even though it's a bogus case. - Make sure we handle probe deferral correctly in the device core file. devm_kfree() the container on error so we don't waste memory for devices without pinctrl handles. - Introduce reference counting into the pinctrl core using <linux/kref.h> so that we don't release pinctrl handles that have been obtained for two or more places. ChangeLog v1->v2 (Linus): - Only store a pointer in the device struct, and only allocate this if it's really used by the device. Cc: Felipe Balbi <balbi@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Mitch Bradley <wmb@firmworks.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Rickard Andersson <rickard.andersson@stericsson.com> Cc: Russell King <linux@arm.linux.org.uk> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [swarren: fixed and simplified error-handling in pinctrl_bind_pins(), to correctly handle deferred probe. Removed admonition from docs not to use pinctrl hogs for devices] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-21drivers: add Contiguous Memory AllocatorMarek Szyprowski
The Contiguous Memory Allocator is a set of helper functions for DMA mapping framework that improves allocations of contiguous memory chunks. CMA grabs memory on system boot, marks it with MIGRATE_CMA migrate type and gives back to the system. Kernel is allowed to allocate only movable pages within CMA's managed memory so that it can be used for example for page cache when DMA mapping do not use it. On dma_alloc_from_contiguous() request such pages are migrated out of CMA area to free required contiguous block and fulfill the request. This allows to allocate large contiguous chunks of memory at any time assuming that there is enough free memory available in the system. This code is heavily based on earlier works by Michal Nazarewicz. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Rob Clark <rob.clark@linaro.org> Tested-by: Ohad Ben-Cohen <ohad@wizery.com> Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Tested-by: Robert Nelson <robertcnelson@gmail.com> Tested-by: Barry Song <Baohua.Song@csr.com>
2012-02-10drivers/base: add bus for System-on-Chip devicesLee Jones
Traditionally, any System-on-Chip based platform creates a flat list of platform_devices directly under /sys/devices/platform. In order to give these some better structure, this introduces a new bus type for soc_devices that are registered with the new soc_device_register() function. All devices that are on the same chip should then be registered as child devices of the soc device. The soc bus also exports a few standardised device attributes which allow user space to query the specific type of soc. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-22driver core: remove drivers/base/sys.c and include/linux/sysdev.hGreg Kroah-Hartman
Now that all users of 'struct sysdev' are removed from the kernel, we can safely remove the .h and .c files for this code, to ensure that no one accidentally starts to use it again. Many thanks for Kay who did all the hard work here on making this happen. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-08Merge branch 'dma-buf-merge' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
* 'dma-buf-merge' of git://people.freedesktop.org/~airlied/linux: dma-buf: mark EXPERIMENTAL for 1st release. dma-buf: Documentation for buffer sharing framework dma-buf: Introduce dma buffer sharing mechanism
2012-01-06dma-buf: Introduce dma buffer sharing mechanismSumit Semwal
This is the first step in defining a dma buffer sharing mechanism. A new buffer object dma_buf is added, with operations and API to allow easy sharing of this buffer object across devices. The framework allows: - creation of a buffer object, its association with a file pointer, and associated allocator-defined operations on that buffer. This operation is called the 'export' operation. - different devices to 'attach' themselves to this exported buffer object, to facilitate backing storage negotiation, using dma_buf_attach() API. - the exported buffer object to be shared with the other entity by asking for its 'file-descriptor (fd)', and sharing the fd across. - a received fd to get the buffer object back, where it can be accessed using the associated exporter-defined operations. - the exporter and user to share the scatterlist associated with this buffer object using map_dma_buf and unmap_dma_buf operations. Atleast one 'attach()' call is required to be made prior to calling the map_dma_buf() operation. Couple of building blocks in map_dma_buf() are added to ease introduction of sync'ing across exporter and users, and late allocation by the exporter. For this first version, this framework will work with certain conditions: - *ONLY* exporter will be allowed to mmap to userspace (outside of this framework - mmap is not a buffer object operation), - currently, *ONLY* users that do not need CPU access to the buffer are allowed. More details are there in the documentation patch. This is based on design suggestions from many people at the mini-summits[1], most notably from Arnd Bergmann <arnd@arndb.de>, Rob Clark <rob@ti.com> and Daniel Vetter <daniel@ffwll.ch>. The implementation is inspired from proof-of-concept patch-set from Tomasz Stanislawski <t.stanislaws@samsung.com>, who demonstrated buffer sharing between two v4l2 devices. [2] [1]: https://wiki.linaro.org/OfficeofCTO/MemoryManagement [2]: http://lwn.net/Articles/454389 Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Dave Airlie <airlied@redhat.com> Reviewed-and-Tested-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-26topology: Provide CPU topology in sysfs in !SMP configurationsBen Hutchings
We should provide topology information to userland even if it's not very interesting. The current code appears to work properly for !SMP (tested on i386). Reference: http://bugs.debian.org/649216 Reported-by: Marcus Osdoba <marcus.osdoba@googlemail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regulator: Convert tps65023 to use regmap API regmap: Add SPI bus support regmap: Add I2C bus support regmap: Add generic non-memory mapped register access API
2011-07-23regmap: Add generic non-memory mapped register access APIMark Brown
There are many places in the tree where we implement register access for devices on non-memory mapped buses, especially I2C and SPI. Since hardware designers seem to have settled on a relatively consistent set of register interfaces this can be effectively factored out into shared code. There are a standard set of formats for marshalling data for exchange with the device, with the actual I/O mechanisms generally being simple byte streams. We create an abstraction for marshaling data into formats which can be sent on the control interfaces, and create a standard method for plugging in actual transport underneath that. This is mostly a refactoring and renaming of the bottom level of the existing code for sharing register I/O which we have in ASoC. A subsequent patch in this series converts ASoC to use this. The main difference in interface is that reads return values by writing to a location provided by a pointer rather than in the return value, ensuring we can use the full range of the type for register data. We also use unsigned types rather than ints for the same reason. As some of the devices can have very large register maps the existing ASoC code also contains infrastructure for managing register caches. This cache work will be moved over in a future stage to allow for separate review, the current patch only deals with the physical I/O. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-14drivers: iommu: move to a dedicated folderOhad Ben-Cohen
Create a dedicated folder for iommu drivers, and move the base iommu implementation over there. Grouping the various iommu drivers in a single location will help finding similar problems shared by different platforms, so they could be solved once, in the iommu framework, instead of solved differently (or duplicated) in each driver. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2011-03-15PM / Core: Introduce struct syscore_ops for core subsystems PMRafael J. Wysocki
Some subsystems need to carry out suspend/resume and shutdown operations with one CPU on-line and interrupts disabled. The only way to register such operations is to define a sysdev class and a sysdev specifically for this purpose which is cumbersome and inefficient. Moreover, the arguments taken by sysdev suspend, resume and shutdown callbacks are practically never necessary. For this reason, introduce a simpler interface allowing subsystems to register operations to be executed very late during system suspend and shutdown and very early during resume in the form of strcut syscore_ops objects. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22driver-core: base: change to new flag variablematt mooney
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Driver Core: devtmpfs - kernel-maintained tmpfs-based /devKay Sievers
Devtmpfs lets the kernel create a tmpfs instance called devtmpfs very early at kernel initialization, before any driver-core device is registered. Every device with a major/minor will provide a device node in devtmpfs. Devtmpfs can be changed and altered by userspace at any time, and in any way needed - just like today's udev-mounted tmpfs. Unmodified udev versions will run just fine on top of it, and will recognize an already existing kernel-created device node and use it. The default node permissions are root:root 0600. Proper permissions and user/group ownership, meaningful symlinks, all other policy still needs to be applied by userspace. If a node is created by devtmps, devtmpfs will remove the device node when the device goes away. If the device node was created by userspace, or the devtmpfs created node was replaced by userspace, it will no longer be removed by devtmpfs. If it is requested to auto-mount it, it makes init=/bin/sh work without any further userspace support. /dev will be fully populated and dynamic, and always reflect the current device state of the kernel. With the commonly used dynamic device numbers, it solves the problem where static devices nodes may point to the wrong devices. It is intended to make the initial bootup logic simpler and more robust, by de-coupling the creation of the inital environment, to reliably run userspace processes, from a complex userspace bootstrap logic to provide a working /dev. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jan Blunck <jblunck@suse.de> Tested-By: Harald Hoyer <harald@redhat.com> Tested-By: Scott James Remnant <scott@ubuntu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15driver-core: move dma-coherent.c from kernel to driver/baseMing Lei
Placing dma-coherent.c in driver/base is better than in kernel, since it contains code to do per-device coherent dma memory handling. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-03select IOMMU_API when DMAR and/or AMD_IOMMU is selectedJoerg Roedel
These two IOMMUs can implement the current version of this API. So select the API if one or both of these IOMMU drivers is selected. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2008-02-05Merge branch 'dmapool' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc * 'dmapool' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: pool: Improve memory usage for devices which can't cross boundaries Change dmapool free block management dmapool: Tidy up includes and add comments dmapool: Validate parameters to dma_pool_create Avoid taking waitqueue lock in dmapool dmapool: Fix style problems Move dmapool.c to mm/ directory
2008-01-24driver core: fix build with SYSFS=nRandy Dunlap
When SYSFS=n and MODULES=y, build ends with: linux-2.6.24-rc6-mm1/drivers/base/module.c: In function 'module_add_driver': linux-2.6.24-rc6-mm1/drivers/base/module.c:49: error: 'module_kset' undeclared (first use in this function) make[3]: *** [drivers/base/module.o] Error 1 Below is one possible fix. Build-tested with all 4 config combinations of SYSFS & MODULES. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Driver core: move the driver specific module code into the driver coreGreg Kroah-Hartman
The module driver specific code should belong in the driver core, not in the kernel/ directory. So move this code. This is done in preparation for some struct device_driver rework that should be confined to the driver core code only. This also lets us keep from exporting these functions, as no external code should ever be calling it. Thanks to Andrew Morton for the !CONFIG_MODULES fix. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-04Move dmapool.c to mm/ directoryMatthew Wilcox
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2007-05-07Introduce CONFIG_HAS_DMAHeiko Carstens
Architectures that don't support DMA can say so by adding a config NO_DMA to their Kconfig file. This will prevent compilation of some dma specific driver code. Also dma-mapping-broken.h isn't needed anymore on at least s390. This avoids compilation and linking of otherwise dead/broken code. Other architectures that include dma-mapping-broken.h are arm26, h8300, m68k, m68knommu and v850. If these could be converted as well we could get rid of the header file. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> "John W. Linville" <linville@tuxdriver.com> Cc: Kyle McMartin <kyle@parisc-linux.org> Cc: <James.Bottomley@SteelEye.com> Cc: Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <geert@linux-m68k.org> Cc: <zippel@linux-m68k.org> Cc: <spyro@f2s.com> Cc: <uclinux-v850@lsi.nec.co.jp> Cc: <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09devres: device resource managementTejun Heo
Implement device resource management, in short, devres. A device driver can allocate arbirary size of devres data which is associated with a release function. On driver detach, release function is invoked on the devres data, then, devres data is freed. devreses are typed by associated release functions. Some devreses are better represented by single instance of the type while others need multiple instances sharing the same release function. Both usages are supported. devreses can be grouped using devres group such that a device driver can easily release acquired resources halfway through initialization or selectively release resources (e.g. resources for port 1 out of 4 ports). This patch adds devres core including documentation and the following managed interfaces. * alloc/free : devm_kzalloc(), devm_kzfree() * IO region : devm_request_region(), devm_release_region() * IRQ : devm_request_irq(), devm_free_irq() * DMA : dmam_alloc_coherent(), dmam_free_coherent(), dmam_declare_coherent_memory(), dmam_pool_create(), dmam_pool_destroy() * PCI : pcim_enable_device(), pcim_pin_device(), pci_is_managed() * iomap : devm_ioport_map(), devm_ioport_unmap(), devm_ioremap(), devm_ioremap_nocache(), devm_iounmap(), pcim_iomap_table(), pcim_iomap(), pcim_iounmap() Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-01[PATCH] hot-add-mem x86_64: use CONFIG_MEMORY_HOTPLUG_SPARSEKeith Mannthey
Migate CONFIG_MEMORY_HOTPLUG to CONFIG_MEMORY_HOTPLUG_SPARSE where needed. Signed-off-by: Keith Mannthey <kmannth@us.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-21[PATCH] Driver model: add ISA busRene Herman
During the recent "isa drivers using platform devices" discussion it was pointed out that (ALSA) ISA drivers ran into the problem of not having the option to fail driver load (device registration rather) upon not finding their hardware due to a probe() error not being passed up through the driver model. In the course of that, I suggested a seperate ISA bus might be best; Russell King agreed and suggested this bus could use the .match() method for the actual device discovery. The attached does this. For this old non (generically) discoverable ISA hardware only the driver itself can do discovery so as a difference with the platform_bus, this isa_bus also distributes match() up to the driver. As another difference: these devices only exist in the driver model due to the driver creating them because it might want to drive them, meaning that all device creation has been made internal as well. The usage model this provides is nice, and has been acked from the ALSA side by Takashi Iwai and Jaroslav Kysela. The ALSA driver module_init's now (for oldisa-only drivers) become: static int __init alsa_card_foo_init(void) { return isa_register_driver(&snd_foo_isa_driver, SNDRV_CARDS); } static void __exit alsa_card_foo_exit(void) { isa_unregister_driver(&snd_foo_isa_driver); } Quite like the other bus models therefore. This removes a lot of duplicated init code from the ALSA ISA drivers. The passed in isa_driver struct is the regular driver struct embedding a struct device_driver, the normal probe/remove/shutdown/suspend/resume callbacks, and as indicated that .match callback. The "SNDRV_CARDS" you see being passed in is a "unsigned int ndev" parameter, indicating how many devices to create and call our methods with. The platform_driver callbacks are called with a platform_device param; the isa_driver callbacks are being called with a "struct device *dev, unsigned int id" pair directly -- with the device creation completely internal to the bus it's much cleaner to not leak isa_dev's by passing them in at all. The id is the only thing we ever want other then the struct device * anyways, and it makes for nicer code in the callbacks as well. With this additional .match() callback ISA drivers have all options. If ALSA would want to keep the old non-load behaviour, it could stick all of the old .probe in .match, which would only keep them registered after everything was found to be present and accounted for. If it wanted the behaviour of always loading as it inadvertently did for a bit after the changeover to platform devices, it could just not provide a .match() and do everything in .probe() as before. If it, as Takashi Iwai already suggested earlier as a way of following the model from saner buses more closely, wants to load when a later bind could conceivably succeed, it could use .match() for the prerequisites (such as checking the user wants the card enabled and that port/irq/dma values have been passed in) and .probe() for everything else. This is the nicest model. To the code... This exports only two functions; isa_{,un}register_driver(). isa_register_driver() register's the struct device_driver, and then loops over the passed in ndev creating devices and registering them. This causes the bus match method to be called for them, which is: int isa_bus_match(struct device *dev, struct device_driver *driver) { struct isa_driver *isa_driver = to_isa_driver(driver); if (dev->platform_data == isa_driver) { if (!isa_driver->match || isa_driver->match(dev, to_isa_dev(dev)->id)) return 1; dev->platform_data = NULL; } return 0; } The first thing this does is check if this device is in fact one of this driver's devices by seeing if the device's platform_data pointer is set to this driver. Platform devices compare strings, but we don't need to do that with everything being internal, so isa_register_driver() abuses dev->platform_data as a isa_driver pointer which we can then check here. I believe platform_data is available for this, but if rather not, moving the isa_driver pointer to the private struct isa_dev is ofcourse fine as well. Then, if the the driver did not provide a .match, it matches. If it did, the driver match() method is called to determine a match. If it did _not_ match, dev->platform_data is reset to indicate this to isa_register_driver which can then unregister the device again. If during all this, there's any error, or no devices matched at all everything is backed out again and the error, or -ENODEV, is returned. isa_unregister_driver() just unregisters the matched devices and the driver itself. More global points/questions... - I'm introducing include/linux/isa.h. It was available but is ofcourse a somewhat generic name. Moving more isa stuff over to it in time is ofcourse fine, so can I have it please? :) - I'm using device_initcall() and added the isa.o (dependent on CONFIG_ISA) after the base driver model things in the Makefile. Will this do, or I really need to stick it in drivers/base/init.c, inside #ifdef CONFIG_ISA? It's working fine. Lastly -- I also looked, a bit, into integrating with PnP. "Old ISA" could be another pnp_protocol, but this does not seem to be a good match, largely due to the same reason platform_devices weren't -- the devices do not have a life of their own outside the driver, meaning the pnp_protocol {get,set}_resources callbacks would need to callback into driver -- which again means you first need to _have_ that driver. Even if there's clean way around that, you only end up inventing fake but valid-form PnP IDs and generally catering to the PnP layer without any practical advantages over this very simple isa_bus. The thing I also suggested earlier about the user echoing values into /sys to set up the hardware from userspace first is... well, cute, but a horrible idea from a user standpoint. Comments ofcourse appreciated. Hope it's okay. As said, the usage model is nice at least. Signed-off-by: Rene Herman <rene.herman@keyaccess.nl>
2006-06-21[PATCH] Driver Core: Add /sys/hypervisor when neededMichael Holzheu
To have a home for all hypervisors, this patch creates /sys/hypervisor. A new config option SYS_HYPERVISOR is introduced, which should to be set by architecture dependent hypervisors (e.g. s390 or Xen). Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-03[PATCH] Export cpu topology in sysfsZhang, Yanmin
The patch implements cpu topology exportation by sysfs. Items (attributes) are similar to /proc/cpuinfo. 1) /sys/devices/system/cpu/cpuX/topology/physical_package_id: represent the physical package id of cpu X; 2) /sys/devices/system/cpu/cpuX/topology/core_id: represent the cpu core id to cpu X; 3) /sys/devices/system/cpu/cpuX/topology/thread_siblings: represent the thread siblings to cpu X in the same core; 4) /sys/devices/system/cpu/cpuX/topology/core_siblings: represent the thread siblings to cpu X in the same physical package; To implement it in an architecture-neutral way, a new source file, driver/base/topology.c, is to export the 5 attributes. If one architecture wants to support this feature, it just needs to implement 4 defines, typically in file include/asm-XXX/topology.h. The 4 defines are: #define topology_physical_package_id(cpu) #define topology_core_id(cpu) #define topology_thread_siblings(cpu) #define topology_core_siblings(cpu) The type of **_id is int. The type of siblings is cpumask_t. To be consistent on all architectures, the 4 attributes should have deafult values if their values are unavailable. Below is the rule. 1) physical_package_id: If cpu has no physical package id, -1 is the default value. 2) core_id: If cpu doesn't support multi-core, its core id is 0. 3) thread_siblings: Just include itself, if the cpu doesn't support HT/multi-thread. 4) core_siblings: Just include itself, if the cpu doesn't support multi-core and HT/Multi-thread. So be careful when declaring the 4 defines in include/asm-XXX/topology.h. If an attribute isn't defined on an architecture, it won't be exported. Thank Nathan, Greg, Andi, Paul and Venki. The patch provides defines for i386/x86_64/ia64. Signed-off-by: Zhang, Yanmin <yanmin.zhang@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29[PATCH] memory hotplug: sysfs and add/remove functionsDave Hansen
This adds generic memory add/remove and supporting functions for memory hotplug into a new file as well as a memory hotplug kernel config option. Individual architecture patches will follow. For now, disable memory hotplug when swsusp is enabled. There's a lot of churn there right now. We'll fix it up properly once it calms down. Signed-off-by: Matt Tolentino <matthew.e.tolentino@intel.com> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-20[PATCH] Move device/driver code to drivers/base/dd.cmochel@digitalimplant.org
This relocates the driver binding/unbinding code to drivers/base/dd.c. This is done for two reasons: One, it's not code related to the bus_type itself; it uses some from that, some from devices, and some from drivers. And Two, it will make it easier to do some of the upcoming lock removal on that code.. Signed-off-by: Patrick Mochel <mochel@digitalimplant.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] class: remove class_simple code, as no one in the tree is using it ↵gregkh@suse.de
anymore. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17[PATCH] Driver Core: remove driver model detach_stateDavid Brownell
The driver model has a "detach_state" mechanism that: - Has never been used by any in-kernel drive; - Is superfluous, since driver remove() methods can do the same thing; - Became buggy when the suspend() parameter changed semantics and type; - Could self-deadlock when called from certain suspend contexts; - Is effectively wasted documentation, object code, and headspace. This removes that "detach_state" mechanism; net code shrink, as well as a per-device saving in the driver model and sysfs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!