summaryrefslogtreecommitdiffstats
path: root/drivers/block/sunvdc.c
AgeCommit message (Collapse)Author
2014-12-11sunvdc: reconnect ldc after vds service domain restartsDwight Engen
This change enables the sunvdc driver to reconnect and recover if a vds service domain is disconnected or bounced. By default, it will wait indefinitely for the service domain to become available again, but will honor a non-zero vdc-timout md property if one is set. If a timeout is reached, any in-progress I/O's are completed with -EIO. Signed-off-by: Dwight Engen <dwight.engen@oracle.com> Reviewed-by: Chris Hyser <chris.hyser@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-11vio: create routines for inc,dec vio dring indexesDwight Engen
Both sunvdc and sunvnet implemented distinct functionality for incrementing and decrementing dring indexes. Create common functions for use by both from the sunvnet versions, which were chosen since they will still work correctly in case a non power of two ring size is used. Signed-off-by: Dwight Engen <dwight.engen@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-11sunvdc: fix module unload/reloadDwight Engen
Free resources allocated during port/disk probing so that the module may be successfully reloaded after unloading. Signed-off-by: Dwight Engen <dwight.engen@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-31sunvdc: don't call VD_OP_GET_VTOCDwight Engen
The VD_OP_GET_VTOC operation will succeed only if the vdisk backend has a VTOC label, otherwise it will fail. In particular, it will return error 48 (ENOTSUP) if the disk has an EFI label. VTOC disk labels are already handled by directly reading the disk in block/partitions/sun.c (enabled by CONFIG_SUN_PARTITION which defaults to y on SPARC). Since port->label is unused in the driver, remove the call and the field. Signed-off-by: Dwight Engen <dwight.engen@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30vio: fix reuse of vio_dring slotDwight Engen
vio_dring_avail() will allow use of every dring entry, but when the last entry is allocated then dr->prod == dr->cons which is indistinguishable from the ring empty condition. This causes the next allocation to reuse an entry. When this happens in sunvdc, the server side vds driver begins nack'ing the messages and ends up resetting the ldc channel. This problem does not effect sunvnet since it checks for < 2. The fix here is to just never allocate the very last dring slot so that full and empty are not the same condition. The request start path was changed to check for the ring being full a bit earlier, and to stop the blk_queue if there is no space left. The blk_queue will be restarted once the ring is only half full again. The number of ring entries was increased to 512 which matches the sunvnet and Solaris vdc drivers, and greatly reduces the frequency of hitting the ring full condition and the associated blk_queue stop/starting. The checks in sunvent were adjusted to account for vio_dring_avail() returning 1 less. Orabug: 19441666 OraBZ: 14983 Signed-off-by: Dwight Engen <dwight.engen@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30sunvdc: limit each sg segment to a pageDwight Engen
ldc_map_sg() could fail its check that the number of pages referred to by the sg scatterlist was <= the number of cookies. This fixes the issue by doing a similar thing to the xen-blkfront driver, ensuring that the scatterlist will only ever contain a segment count <= port->ring_cookies, and each segment will be page aligned, and <= page size. This ensures that the scatterlist is always mappable. Orabug: 19347817 OraBZ: 15945 Signed-off-by: Dwight Engen <dwight.engen@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30sunvdc: compute vdisk geometry from capacityAllen Pais
The LDom diskserver doesn't return reliable geometry data. In addition, the types for all fields in the vio_disk_geom are u16, which were being truncated in the cast into the u8's of the Linux struct hd_geometry. Modify vdc_getgeo() to compute the geometry from the disk's capacity in a manner consistent with xen-blkfront::blkif_getgeo(). Signed-off-by: Dwight Engen <dwight.engen@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30sunvdc: add cdrom and v1.1 protocol supportAllen Pais
Interpret the media type from v1.1 protocol to support CDROM/DVD. For v1.0 protocol, a disk's size continues to be calculated from the geometry returned by the vdisk server. The geometry returned by the server can be less than the actual number of sectors available in the backing image/device due to the rounding in the division used to compute the geometry in the vdisk server. In v1.1 protocol a disk's actual size in sectors is returned during the handshake. Use this size when v1.1 protocol is negotiated. Since this size will always be larger than the former geometry computed size, disks created under v1.0 will be forwards compatible to v1.1, but not vice versa. Signed-off-by: Dwight Engen <dwight.engen@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-14sunvdc: Fix off-by-one in generic_request().David S. Miller
The 'operations' bitmap corresponds one-for-one with the operation codes, no adjustment is necessary. Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-03Drivers: block: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Mike Miller <mike.miller@hp.com> Cc: Chirag Kantharia <chirag.kantharia@hp.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Jim Paris <jim@jtan.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: NeilBrown <neilb@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Tao Guo <Tao.Guo@emc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-28powerpc+sparc/vio: Modernize driver registrationBenjamin Herrenschmidt
This makes vio_register_driver() get the module owner & name at compile time like PCI drivers do, and adds a name pointer directly in struct vio_driver to avoid having to explicitly initialize the embedded struct device. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David S. Miller <davem@davemloft.net>
2010-02-26block: Consolidate phys_segment and hw_segment limitsMartin K. Petersen
Except for SCSI no device drivers distinguish between physical and hardware segment limits. Consolidate the two into a single segment limit. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-26block: Rename blk_queue_max_sectors to blk_queue_max_hw_sectorsMartin K. Petersen
The block layer calling convention is blk_queue_<limit name>. blk_queue_max_sectors predates this practice, leading to some confusion. Rename the function to appropriately reflect that its intended use is to set max_hw_sectors. Also introduce a temporary wrapper for backwards compability. This can be removed after the merge window is closed. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-22const: make block_device_operations constAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-11block: implement and enforce request peek/start/fetchTejun Heo
Till now block layer allowed two separate modes of request execution. A request is always acquired from the request queue via elv_next_request(). After that, drivers are free to either dequeue it or process it without dequeueing. Dequeue allows elv_next_request() to return the next request so that multiple requests can be in flight. Executing requests without dequeueing has its merits mostly in allowing drivers for simpler devices which can't do sg to deal with segments only without considering request boundary. However, the benefit this brings is dubious and declining while the cost of the API ambiguity is increasing. Segment based drivers are usually for very old or limited devices and as converting to dequeueing model isn't difficult, it doesn't justify the API overhead it puts on block layer and its more modern users. Previous patches converted all block low level drivers to dequeueing model. This patch completes the API transition by... * renaming elv_next_request() to blk_peek_request() * renaming blkdev_dequeue_request() to blk_start_request() * adding blk_fetch_request() which is combination of peek and start * disallowing completion of queued (not started) requests * applying new API to all LLDs Renamings are for consistency and to break out of tree code so that it's apparent that out of tree drivers need updating. [ Impact: block request issue API cleanup, no functional change ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Mike Miller <mike.miller@hp.com> Cc: unsik Kim <donari75@gmail.com> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: David S. Miller <davem@davemloft.net> Cc: Laurent Vivier <Laurent@lvivier.info> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: Pierre Ossman <drzeus@drzeus.cx> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: Stefan Weinhuber <wein@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11block: convert to pos and nr_sectors accessorsTejun Heo
With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-28sunvdc: kill vdc_end_request()Tejun Heo
vdc_end_request() is a thin silly wrapper on top of __blk_end_request(). Kill it. [ Impact: cleanup ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-01-06sparc64: Fix unsigned long long warnings in drivers.Sam Ravnborg
Fix warnings caused by the unsigned long long usage in sparc specific drivers. The drivers were considered sparc specific more or less from the filename alone. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-01sparc64: Apply const or __initdata to vio_device_id[]David S. Miller
This mirrors the of_device_id[] changes done in fd098316ef533e8441576f020ead4beab93154ce ("sparc: Annotate of_device_id arrays with const or __initdata.") Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-01block/sunvdc.c:print_version() must be __devinitAdrian Bunk
This patch fixes the following section mismatches: <-- snip --> ... WARNING: drivers/block/sunvdc.o(.text+0xf0): Section mismatch in reference from the function print_version() to the variable .devinit.data:version WARNING: drivers/block/sunvdc.o(.text+0xf8): Section mismatch in reference from the function print_version() to the variable .devinit.data:version ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28blk_end_request: changing sunvdc (take 4)Kiyoshi Ueda
This patch converts sunvdc to use blk_end_request interfaces. Related 'uptodate' arguments are converted to 'error'. As a result, the interface of internal function, vdc_end_request(), is changed. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-24More SG build fixesDavid Miller
Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2007-10-22[SG] Update drivers to use sg helpersJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-08-26[SUNVDC]: Use slice 0xff on VD_DISK_TYPE_DISK.David S. Miller
While debugging issues with the VDS server I made the driver use partition 2 to get at the whole disk since this is the "whole disk" partition in the Sun disk label. We really should use slice 0xff which really means the whole physical disk in the VIO disk protocol. Otherwise things won't work well on a disk image that doesn't have a proper disk label on it. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-24[BLOCK] Get rid of request_queue_t typedefJens Axboe
Some of the code has been gradually transitioned to using the proper struct request_queue, but there's lots left. So do a full sweet of the kernel and get rid of this typedef and replace its uses with the proper type. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-19[SPARC64]: Fix handling of multiple vdc-port nodes.David S. Miller
The "id" property in vdc-port nodes are not unique, they are all zero. Therefore assign ID's using the parent's "cfg-handle" property which will be unique. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-19[SPARC64]: Fix MODULE_DEVICE_TABLE() specification in VDC and VNET.Fabio Massimo Di Nitto
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-18[SPARC64]: Simplify VDC device probing.David S. Miller
We just need to match on the vdc-port nodes, the parent is really not interesting at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16[SPARC64]: Abstract out mdesc accesses for better MD update handling.David S. Miller
Since we have to be able to handle MD updates, having an in-tree set of data structures representing the MD objects actually makes things more painful. The MD itself is easy to parse, and we can implement the existing interfaces using direct parsing of the MD binary image. The MD is now reference counted, so accesses have to now take the form: handle = mdesc_grab(); ... operations on MD ... mdesc_release(handle); The only remaining issue are cases where code holds on to references to MD property values. mdesc_get_property() returns a direct pointer to the property value, most cases just pull in the information they need and discard the pointer, but there are few that use the pointer directly over a long lifetime. Those will be fixed up in a subsequent changeset. A preliminary handler for MD update events from domain services is there, it is rudimentry but it works and handles all of the reference counting. It does not check the generation number of the MDs, and it does not generate a "add/delete" list for notification to interesting parties about MD changes but that will be forthcoming. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16[SPARC64]: Add Sun LDOM virtual disk driver.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>