summaryrefslogtreecommitdiffstats
path: root/drivers/block
AgeCommit message (Collapse)Author
2015-01-08NVMe: Fix locking on abort handlingKeith Busch
The queues and device need to be locked when messing with them. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-08NVMe: Start and stop h/w queues on resetKeith Busch
This freezes and stops all the queues on device shutdown and restarts them on resume. This fixes hotplug and reset issues when the controller is actively being used. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-08NVMe: Command abort handling fixesKeith Busch
Aborts all requeued commands prior to killing the request_queue. For commands that time out on a dying request queue, set the "Do Not Retry" bit on the command status so the command cannot be requeued. Finanally, if the driver is requested to abort a command it did not start, do nothing. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-08NVMe: Admin queue removal handlingKeith Busch
This protects admin queue access on shutdown. When the controller is disabled, the queue is frozen to prevent new entry, and unfrozen on resume, and fixes cq_vector signedness to not suspend a queue twice. Since unfreezing the queue makes it available for commands, it requires the queue be initialized, so this moves this part after that. Special handling is done when the device is unresponsive during shutdown. This can be optimized to not require subsequent commands to timeout, but saving that fix for later. This patch also removes the kill signals in this path that were left-over artifacts from the blk-mq conversion and no longer necessary. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-08NVMe: Reference count admin queue usageKeith Busch
Since there is no gendisk associated with the admin queue, the driver needs to hold a reference to it until all open references to the controller are closed. This also combines queue cleanup with freeing the tag set since these should not be separate. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-08NVMe: Start all requestsKeith Busch
Once the nvme callback is set for a request, the driver can start it and make it available for timeout handling. For timed out commands on a device that is not initialized, this fixes potential deadlocks that can occur on startup and shutdown when a device is unresponsive since they can now be cancelled. Asynchronous requests do not have any expected timeout, so these are using the new "REQ_NO_TIMEOUT" request flags. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-02block: fix checking return value of blk_mq_init_queueMing Lei
Check IS_ERR_OR_NULL(return value) instead of just return value. Signed-off-by: Ming Lei <ming.lei@canonical.com> Reduced to IS_ERR() by me, we never return NULL. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-22NVMe: Fix double free irqKeith Busch
Sets the vector to an invalid value after it's freed so we don't free it twice. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull ceph updates from Sage Weil: "The big item here is support for inline data for CephFS and for message signatures from Zheng. There are also several bug fixes, including interrupted flock request handling, 0-length xattrs, mksnap, cached readdir results, and a message version compat field. Finally there are several cleanups from Ilya, Dan, and Markus. Note that there is another series coming soon that fixes some bugs in the RBD 'lingering' requests, but it isn't quite ready yet" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (27 commits) ceph: fix setting empty extended attribute ceph: fix mksnap crash ceph: do_sync is never initialized libceph: fixup includes in pagelist.h ceph: support inline data feature ceph: flush inline version ceph: convert inline data to normal data before data write ceph: sync read inline data ceph: fetch inline data when getting Fcr cap refs ceph: use getattr request to fetch inline data ceph: add inline data to pagecache ceph: parse inline data in MClientReply and MClientCaps libceph: specify position of extent operation libceph: add CREATE osd operation support libceph: add SETXATTR/CMPXATTR osd operations support rbd: don't treat CEPH_OSD_OP_DELETE as extent op ceph: remove unused stringification macros libceph: require cephx message signature by default ceph: introduce global empty snap context ceph: message versioning fixes ...
2014-12-17rbd: don't treat CEPH_OSD_OP_DELETE as extent opIlya Dryomov
CEPH_OSD_OP_DELETE is not an extent op, stop treating it as such. This sneaked in with discard patches - it's one of the three osd ops (the other two are CEPH_OSD_OP_TRUNCATE and CEPH_OSD_OP_ZERO) that discard is implemented with. Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-12-17ceph, rbd: delete unnecessary checks before two function callsSF Markus Elfring
The functions ceph_put_snap_context() and iput() test whether their argument is NULL and then return immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [idryomov@redhat.com: squashed rbd.c hunk, changelog] Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-13Merge branch 'for-3.19/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer driver updates from Jens Axboe: - NVMe updates: - The blk-mq conversion from Matias (and others) - A stack of NVMe bug fixes from the nvme tree, mostly from Keith. - Various bug fixes from me, fixing issues in both the blk-mq conversion and generic bugs. - Abort and CPU online fix from Sam. - Hot add/remove fix from Indraneel. - A couple of drbd fixes from the drbd team (Andreas, Lars, Philipp) - With the generic IO stat accounting from 3.19/core, converting md, bcache, and rsxx to use those. From Gu Zheng. - Boundary check for queue/irq mode for null_blk from Matias. Fixes cases where invalid values could be given, causing the device to hang. - The xen blkfront pull request, with two bug fixes from Vitaly. * 'for-3.19/drivers' of git://git.kernel.dk/linux-block: (56 commits) NVMe: fix race condition in nvme_submit_sync_cmd() NVMe: fix retry/error logic in nvme_queue_rq() NVMe: Fix FS mount issue (hot-remove followed by hot-add) NVMe: fix error return checking from blk_mq_alloc_request() NVMe: fix freeing of wrong request in abort path xen/blkfront: remove redundant flush_op xen/blkfront: improve protection against issuing unsupported REQ_FUA NVMe: Fix command setup on IO retry null_blk: boundary check queue_mode and irqmode block/rsxx: use generic io stats accounting functions to simplify io stat accounting md: use generic io stats accounting functions to simplify io stat accounting drbd: use generic io stats accounting functions to simplify io stat accounting md/bcache: use generic io stats accounting functions to simplify io stat accounting NVMe: Update module version major number NVMe: fail pci initialization if the device doesn't have any BARs NVMe: add ->exit_hctx() hook NVMe: make setup work for devices that don't do INTx NVMe: enable IO stats by default NVMe: nvme_submit_async_admin_req() must use atomic rq allocation NVMe: replace blk_put_request() with blk_mq_free_request() ...
2014-12-13Merge branch 'for-3.19/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver core update from Jens Axboe: "This is the pull request for the core block IO changes for 3.19. Not a huge round this time, mostly lots of little good fixes: - Fix a bug in sysfs blktrace interface causing a NULL pointer dereference, when enabled/disabled through that API. From Arianna Avanzini. - Various updates/fixes/improvements for blk-mq: - A set of updates from Bart, mostly fixing buts in the tag handling. - Cleanup/code consolidation from Christoph. - Extend queue_rq API to be able to handle batching issues of IO requests. NVMe will utilize this shortly. From me. - A few tag and request handling updates from me. - Cleanup of the preempt handling for running queues from Paolo. - Prevent running of unmapped hardware queues from Ming Lei. - Move the kdump memory limiting check to be in the correct location, from Shaohua. - Initialize all software queues at init time from Takashi. This prevents a kobject warning when CPUs are brought online that weren't online when a queue was registered. - Single writeback fix for I_DIRTY clearing from Tejun. Queued with the core IO changes, since it's just a single fix. - Version X of the __bio_add_page() segment addition retry from Maurizio. Hope the Xth time is the charm. - Documentation fixup for IO scheduler merging from Jan. - Introduce (and use) generic IO stat accounting helpers for non-rq drivers, from Gu Zheng. - Kill off artificial limiting of max sectors in a request from Christoph" * 'for-3.19/core' of git://git.kernel.dk/linux-block: (26 commits) bio: modify __bio_add_page() to accept pages that don't start a new segment blk-mq: Fix uninitialized kobject at CPU hotplugging blktrace: don't let the sysfs interface remove trace from running list blk-mq: Use all available hardware queues blk-mq: Micro-optimize bt_get() blk-mq: Fix a race between bt_clear_tag() and bt_get() blk-mq: Avoid that __bt_get_word() wraps multiple times blk-mq: Fix a use-after-free blk-mq: prevent unmapped hw queue from being scheduled blk-mq: re-check for available tags after running the hardware queue blk-mq: fix hang in bt_get() blk-mq: move the kdump check to blk_mq_alloc_tag_set blk-mq: cleanup tag free handling blk-mq: use 'nr_cpu_ids' as highest CPU ID count for hwq <-> cpu map blk: introduce generic io stat accounting help function blk-mq: handle the single queue case in blk_mq_hctx_next_cpu genhd: check for int overflow in disk_expand_part_tbl() blk-mq: add blk_mq_free_hctx_request() blk-mq: export blk_mq_free_request() blk-mq: use get_cpu/put_cpu instead of preempt_disable/preempt_enable ...
2014-12-13Merge branch 'akpm' (second patch-bomb from Andrew)Linus Torvalds
Merge second patchbomb from Andrew Morton: - the rest of MM - misc fs fixes - add execveat() syscall - new ratelimit feature for fault-injection - decompressor updates - ipc/ updates - fallocate feature creep - fsnotify cleanups - a few other misc things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (99 commits) cgroups: Documentation: fix trivial typos and wrong paragraph numberings parisc: percpu: update comments referring to __get_cpu_var percpu: update local_ops.txt to reflect this_cpu operations percpu: remove __get_cpu_var and __raw_get_cpu_var macros fsnotify: remove destroy_list from fsnotify_mark fsnotify: unify inode and mount marks handling fallocate: create FAN_MODIFY and IN_MODIFY events mm/cma: make kmemleak ignore CMA regions slub: fix cpuset check in get_any_partial slab: fix cpuset check in fallback_alloc shmdt: use i_size_read() instead of ->i_size ipc/shm.c: fix overly aggressive shmdt() when calls span multiple segments ipc/msg: increase MSGMNI, remove scaling ipc/sem.c: increase SEMMSL, SEMMNI, SEMOPM ipc/sem.c: change memory barrier in sem_lock() to smp_rmb() lib/decompress.c: consistency of compress formats for kernel image decompress_bunzip2: off by one in get_next_block() usr/Kconfig: make initrd compression algorithm selection not expert fault-inject: add ratelimit option ratelimit: add initialization macro ...
2014-12-13zram: use DEVICE_ATTR_[RW|RO|WO] to define zram sys device attributeGanesh Mahendran
In current zram, we use DEVICE_ATTR() to define sys device attributes. SO, we need to set (S_IRUGO | S_IWUSR) permission and other arguments manually. Linux already provids the macro DEVICE_ATTR_[RW|RO|WO] to define sys device attribute. It is simple and readable. This patch uses kernel defined macro DEVICE_ATTR_[RW|RO|WO] to define zram device attribute. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13mm/zram: correct ZRAM_ZERO flag bit positionMahendran Ganesh
In struct zram_table_entry, the element *value* contains obj size and obj zram flags. Bit 0 to bit (ZRAM_FLAG_SHIFT - 1) represent obj size, and bit ZRAM_FLAG_SHIFT to the highest bit of unsigned long represent obj zram_flags. So the first zram flag(ZRAM_ZERO) should be from ZRAM_FLAG_SHIFT instead of (ZRAM_FLAG_SHIFT + 1). This patch fixes this cosmetic issue. Also fix a typo, "page in now accessed" -> "page is now accessed" Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Weijie Yang <weijie.yang@samsung.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13zram: implement rw_page operation of zramkaram.lee
This patch implements rw_page operation for zram block device. I implemented the feature in zram and tested it. Test bed was the G2, LG electronic mobile device, whtich has msm8974 processor and 2GB memory. With a memory allocation test program consuming memory, the system generates swap. Operating time of swap_write_page() was measured. -------------------------------------------------- | | operating time | improvement | | | (20 runs average) | | -------------------------------------------------- |with patch | 1061.15 us | +2.4% | -------------------------------------------------- |without patch| 1087.35 us | | -------------------------------------------------- Each test(with paged_io,with BIO) result set shows normal distribution and has equal variance. I mean the two values are valid result to compare. I can say operation with paged I/O(without BIO) is faster 2.4% with confidence level 95%. [minchan@kernel.org: make rw_page opeartion return 0] [minchan@kernel.org: rely on the bi_end_io for zram_rw_page fails] [sergey.senozhatsky@gmail.com: code cleanup] [minchan@kernel.org: add comment] Signed-off-by: karam.lee <karam.lee@lge.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: <seungho1.park@lge.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13zram: change parameter from vaild_io_request()karam.lee
This patch changes parameter of valid_io_request for common usage. The purpose of valid_io_request() is to determine if bio request is valid or not. This patch use I/O start address and size instead of a BIO parameter for common usage. Signed-off-by: karam.lee <karam.lee@lge.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: <seungho1.park@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13zram: remove bio parameter from zram_bvec_rw()karam.lee
Recently rw_page block device operation has been added. This patchset implements rw_page operation for zram block device and does some clean-up. This patch (of 3): Remove an unnecessary parameter(bio) from zram_bvec_rw() and zram_bvec_read(). zram_bvec_read() doesn't use a bio parameter, so remove it. zram_bvec_rw() calls a read/write operation not using bio, so a rw parameter replaces a bio parameter. Signed-off-by: karam.lee <karam.lee@lge.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: <seungho1.park@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-12NVMe: fix race condition in nvme_submit_sync_cmd()Jens Axboe
If we have a race between the schedule timing out and the command completing, we could have the task issuing the command exit nvme_submit_sync_cmd() while the irq is running sync_completion(). If that happens, we could be corrupting memory, since the stack that held 'cmdinfo' is no longer valid. Fix this by always calling nvme_abort_cmd_info(). Once that call completes, we know that we have either run sync_completion() if the completion came in, or that we will never run it since we now have special_completion() as the command callback handler. Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-11sunvdc: reconnect ldc after vds service domain restartsDwight Engen
This change enables the sunvdc driver to reconnect and recover if a vds service domain is disconnected or bounced. By default, it will wait indefinitely for the service domain to become available again, but will honor a non-zero vdc-timout md property if one is set. If a timeout is reached, any in-progress I/O's are completed with -EIO. Signed-off-by: Dwight Engen <dwight.engen@oracle.com> Reviewed-by: Chris Hyser <chris.hyser@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-11vio: create routines for inc,dec vio dring indexesDwight Engen
Both sunvdc and sunvnet implemented distinct functionality for incrementing and decrementing dring indexes. Create common functions for use by both from the sunvnet versions, which were chosen since they will still work correctly in case a non power of two ring size is used. Signed-off-by: Dwight Engen <dwight.engen@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-11sunvdc: fix module unload/reloadDwight Engen
Free resources allocated during port/disk probing so that the module may be successfully reloaded after unloading. Signed-off-by: Dwight Engen <dwight.engen@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-11NVMe: fix retry/error logic in nvme_queue_rq()Jens Axboe
The logic around retrying and erroring IO in nvme_queue_rq() is broken in a few ways: - If we fail allocating dma memory for a discard, we return retry. We have the 'iod' stored in ->special, but we free the 'iod'. - For a normal request, if we fail dma mapping of setting up prps, we have the same iod situation. Additionally, we haven't set the callback for the request yet, so we also potentially leak IOMMU resources. Get rid of the ->special 'iod' store. The retry is uncommon enough that it's not worth optimizing for or holding on to resources to attempt to speed it up. Additionally, it's usually best practice to free any request related resources when doing retries. Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: "virtio: virtio 1.0 support, misc patches This adds a lot of infrastructure for virtio 1.0 support. Notable missing pieces: virtio pci, virtio balloon (needs spec extension), vhost scsi. Plus, there are some minor fixes in a couple of places. Note: some net drivers are affected by these patches. David said he's fine with merging these patches through my tree. Rusty's on vacation, he acked using my tree for these, too" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (70 commits) virtio_ccw: finalize_features error handling virtio_ccw: future-proof finalize_features virtio_pci: rename virtio_pci -> virtio_pci_common virtio_pci: update file descriptions and copyright virtio_pci: split out legacy device support virtio_pci: setup config vector indirectly virtio_pci: setup vqs indirectly virtio_pci: delete vqs indirectly virtio_pci: use priv for vq notification virtio_pci: free up vq->priv virtio_pci: fix coding style for structs virtio_pci: add isr field virtio: drop legacy_only driver flag virtio_balloon: drop legacy_only driver flag virtio_ccw: rev 1 devices set VIRTIO_F_VERSION_1 virtio: allow finalize_features to fail virtio_ccw: legacy: don't negotiate rev 1/features virtio: add API to detect legacy devices virtio_console: fix sparse warnings vhost: remove unnecessary forward declarations in vhost.h ...
2014-12-11NVMe: Fix FS mount issue (hot-remove followed by hot-add)Indraneel M
After Hot-remove of a device with a mounted partition, when the device is hot-added again, the new node reappears as nvme0n1. Mounting this new node fails with the error: mount: mount /dev/nvme0n1p1 on /mnt failed: File exists. The old nodes's FS entries still exist and the kernel can't re-create procfs and sysfs entries for the new node with the same name. The patch fixes this issue. Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Indraneel M <indraneel.m@samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS changes from Al Viro: "First pile out of several (there _definitely_ will be more). Stuff in this one: - unification of d_splice_alias()/d_materialize_unique() - iov_iter rewrite - killing a bunch of ->f_path.dentry users (and f_dentry macro). Getting that completed will make life much simpler for unionmount/overlayfs, since then we'll be able to limit the places sensitive to file _dentry_ to reasonably few. Which allows to have file_inode(file) pointing to inode in a covered layer, with dentry pointing to (negative) dentry in union one. Still not complete, but much closer now. - crapectomy in lustre (dead code removal, mostly) - "let's make seq_printf return nothing" preparations - assorted cleanups and fixes There _definitely_ will be more piles" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) copy_from_iter_nocache() new helper: iov_iter_kvec() csum_and_copy_..._iter() iov_iter.c: handle ITER_KVEC directly iov_iter.c: convert copy_to_iter() to iterate_and_advance iov_iter.c: convert copy_from_iter() to iterate_and_advance iov_iter.c: get rid of bvec_copy_page_{to,from}_iter() iov_iter.c: convert iov_iter_zero() to iterate_and_advance iov_iter.c: convert iov_iter_get_pages_alloc() to iterate_all_kinds iov_iter.c: convert iov_iter_get_pages() to iterate_all_kinds iov_iter.c: convert iov_iter_npages() to iterate_all_kinds iov_iter.c: iterate_and_advance iov_iter.c: macros for iterating over iov_iter kill f_dentry macro dcache: fix kmemcheck warning in switch_names new helper: audit_file() nfsd_vfs_write(): use file_inode() ncpfs: use file_inode() kill f_dentry uses lockd: get rid of ->f_path.dentry->d_sb ...
2014-12-10Merge branch 'for-jens-3.19' of ↵Jens Axboe
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-3.19/drivers Konrad writes: These are two fixes for Xen blkfront. They harden how it deals with broken backends.
2014-12-10NVMe: fix error return checking from blk_mq_alloc_request()Jens Axboe
We return an error pointer or the request, not NULL. Half the call paths got it right, the others didn't. Fix those up. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-10NVMe: fix freeing of wrong request in abort pathSam Bradshaw
We allocate 'abort_req', but free 'req' in case of an error submitting the IO. Signed-off-by: Sam Bradshaw <sbradshaw@micron.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-12-10xen/blkfront: remove redundant flush_opVitaly Kuznetsov
flush_op is unambiguously defined by feature_flush: REQ_FUA | REQ_FLUSH -> BLKIF_OP_WRITE_BARRIER REQ_FLUSH -> BLKIF_OP_FLUSH_DISKCACHE 0 -> 0 and thus can be removed. This is just a cleanup. The patch was suggested by Boris Ostrovsky. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-12-10xen/blkfront: improve protection against issuing unsupported REQ_FUAVitaly Kuznetsov
Guard against issuing unsupported REQ_FUA and REQ_FLUSH was introduced in d11e61583 and was factored out into blkif_request_flush_valid() in 0f1ca65ee. However: 1) This check in incomplete. In case we negotiated to feature_flush = REQ_FLUSH and flush_op = BLKIF_OP_FLUSH_DISKCACHE (so FUA is unsupported) FUA request will still pass the check. 2) blkif_request_flush_valid() is misnamed. It is bool but returns true when the request is invalid. 3) When blkif_request_flush_valid() fails -EIO is being returned. It seems that -EOPNOTSUPP is more appropriate here. Fix all of the above issues. This patch is based on the original patch by Laszlo Ersek and a comment by Jeff Moyer. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-12-09virtio: drop VIRTIO_F_VERSION_1 from driversMichael S. Tsirkin
Core activates this bit automatically now, drop it from drivers that set it explicitly. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-09virtio_blk: fix race at module removalMichael S. Tsirkin
If a device appears while module is being removed, driver will get a callback after we've given up on the major number. In theory this means this major number can get reused by something else, resulting in a conflict. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09virtio_blk: make serial attribute staticMichael S. Tsirkin
It's never declared so no need to make it extern. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09virtio_blk: v1.0 supportMichael S. Tsirkin
Based on patch by Cornelia Huck. Note: for consistency, and to avoid sparse errors, convert all fields, even those no longer in use for virtio v1.0. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-08Merge branch 'iov_iter' into for-nextAl Viro
2014-12-08Merge remote-tracking branch 'scsi-queue/core-for-3.19' into for-linusJames Bottomley
2014-12-03NVMe: Fix command setup on IO retryKeith Busch
On retry, the req->special is pointing to an already setup IOD, but we still need to setup the command context and callback, otherwise you'll see false twice completed errors and leak requests. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-11-26null_blk: boundary check queue_mode and irqmodeMatias Bjorling
When either queue_mode or irq_mode parameter is set outside its boundaries, the driver will not complete requests. This stalls driver initialization when partitions are probed. Fix by setting out of bound values to the parameters default. Signed-off-by: Matias Bjørling <m@bjorling.me> Updated by me to have the parse+check in just one function. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-11-24scsi: rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16Hannes Reinecke
SPC-3 defines SERVICE ACTION IN(12) and SERVICE ACTION IN(16). So rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16 to be consistent with SPC and to allow for better distinction. Signed-off-by: Hannes Reinecke <hare@suse.de> Tested-by: Robert Elliott <elliott@hp.com> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-24block/rsxx: use generic io stats accounting functions to simplify io stat ↵Gu Zheng
accounting Use generic io stats accounting help functions (generic_{start,end}_io_acct) to simplify io stat accounting. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-11-24drbd: use generic io stats accounting functions to simplify io stat accountingGu Zheng
Use generic io stats accounting help functions (generic_{start,end}_io_acct) to simplify io stat accounting. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-11-21NVMe: Update module version major numberKeith Busch
It's already near impossible to tell what bits someone is running based on a 'modinfo nvme', and I don't want to try guessing if someone is running blk-mq or bio-based. Let's make it obvious with the module version that the blk-mq conversion is a major change. Future bio-based versions can increment to 0.10 in a fork if revisions occur. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-11-20NVMe: fail pci initialization if the device doesn't have any BARsJens Axboe
The PCI init of NVMe doesn't check for valid bars before proceeding to map and use BAR 0. If the device is hosed (or firmware is), then we should catch this case and give up early. This fixes a: [ 1662.035778] WARNING: CPU: 0 PID: 4 at arch/x86/mm/ioremap.c:63 __ioremap_check_ram+0xa7/0xc0() and later badness on such a device. Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-11-20NVMe: add ->exit_hctx() hookJens Axboe
If we do teardown and setup of the queue and block related parts of the driver, then we should clear nvmeq->hctx once we kill the hardware queue. Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-11-19NVMe: make setup work for devices that don't do INTxJens Axboe
The setup/probe part currently relies on INTx being there and working, that's not always the case. For devices that don't advertise INTx, enable a single MSIx vector early on and disable it again before we ask for our full range of queue vecs. Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-11-19kill f_dentry usesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-18Merge branch 'master' into for-3.19/driversJens Axboe