summaryrefslogtreecommitdiffstats
path: root/drivers/char/moxa.c
AgeCommit message (Collapse)Author
2009-12-11tty: moxa: split open lockAlan Cox
moxa_openlock is used for several situations where we want to handle the case of an ioctl that crosses many ports (not just the open tty), and also cases where an open races a deinit (eg a pci unplug) and we hangup a port before we can cope with that. The non open race cases can use the moxa_lock spinlock. This simplifies sorting out the remaining mess. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11tty: moxa: Kill the use of lock_kernelAlan Cox
It isn't needed here any more Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11tty: moxa: Fix modem op lockingAlan Cox
This is overkill and mostly not needed Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11tty: moxa: Kill off the throttle methodAlan Cox
The tty flag can be tested so the shadow flag isn't needed Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11tty: moxa: Locking clean upAlan Cox
- The open lock is needed to fix up the case of a board reset occuring during tty open but too early for a sane hangup response. - The lock can however got for other cases - Use the port mutex for get/setserial - Fix up the confused lack of locking on the THROTTLE and other bits in the private flags. Just use set/test/clear bit and it covers the cases we need Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11tty: moxa: rework the locking a bitAlan Cox
Introduce a lock for moxafunc() to protect the cases where were get collisions between two function requests at the same time. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11tty: moxa: Use more tty_port opsAlan Cox
Rework a few bits of this into tty_port format Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22Revert "char: moxa, prevent opening unavailable ports"Linus Torvalds
This reverts commit a90b037583d5f1ae3e54e9c687c79df82d1d34a4, which already got fixed as commit f0e8527726b9e56649b9eafde3bc0fbc4dd2dd47: the same patch (trivial differences) got applied twice. Requested-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19char: moxa, prevent opening unavailable portsDirk Eibach
In moxa.c there are 32 minor numbers reserved for each device. The number of ports actually available per device is stored in moxa_board_conf->numPorts. This number is not considered in moxa_open(). Opening a port that is not available results in a kernel oops. This patch adds a test to moxa_open() that prevents opening unavailable ports. [akpm@linux-foundation.org: avoid multiple returns] Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11moxa: prevent opening unavailable portsDirk Eibach
In moxa.c there are 32 minor numbers reserved for each device. The number of ports actually available per device is stored in moxa_board_conf->numPorts. This number is not considered in moxa_open(). Opening a port that is not available results in a kernel oops. This patch adds a test to moxa_open() that prevents opening unavailable ports. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06tty: moxa, fix refcounting in moxa_poll_portJiri Slaby
There is missing tty_kref_put on some paths in moxa_poll_port, although the reference is always taken. Fix it. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Reported-by: Jan 'Yenya' Kasprzak <kas@fi.muni.cz> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty_port: Add a port level carrier detect operationAlan Cox
This is the first step to generalising the various pieces of waiting logic duplicated in all sorts of serial drivers. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16char: moxa.c sparse annotationHarvey Harrison
The only use is to pass this to le16_to_cpu, declare as such drivers/char/moxa.c:548:11: warning: cast to restricted __le16. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13tty: kref usage for isicom and moxaAlan Cox
Rather than blindly keep taking krefs we reorder the code in a few places to pass the tty down to the right place (which is important as from the user side it is not the case that tty == port->tty in all situations). For the irq and related paths use the krefs to stop the tty being freed under us. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22tty: rework break handlingAlan Cox
Some hardware needs to do break handling itself and may have partial support only. Make break_ctl return an error code. Add a tty driver flag so you can indicate driver hardware side break support. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20tty: add more tty_port fieldsAlan Cox
Move more bits into the tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20moxa: use tty_portAlan Cox
Switch MOXA to use the new tty_port structure Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-10Fix a const assignment in moxa_load_fw()David Howells
Fix an assignment of a const pointer to a non-const pointer in moxa_load_fw(). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-04-30char serial: switch drivers to ioremap_nocacheAlan Cox
Simple search/replace except for synclink.c where I noticed a real bug and fixed it too. It was doing NULL + offset, then checking for NULL if the remap failed. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Paul Fulghum <paulkf@microgate.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30tty/serial: lay the foundations for the next set of reworksAlan Cox
- Stop drivers calling their own flush method indirectly, it obfuscates code and it will change soon anyway - A few more lock_kernel paths temporarily needed in some driver internal waiting code - Remove private put_char method that does a write call for one char - we have that anyway - Most but not yet all of the termios copy under lock fixing (some has other dependencies to follow) - Note a few locking bugs in drivers found in the process - Kill remaining [ab]users of TIOCG/SSOFTCAR in the driver, these must go to fix the termios locking Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, add firmware loading fixJiri Slaby
Be more verbose on fw load fail as noted by Oyvind. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, update creditsJiri Slaby
- update version - update maintainers - copyright the stuff Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, notify about board readinessJiri Slaby
Drop a message to dmesg about card being ready. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, introduce MOXA_IS_320 macroJiri Slaby
It allows to simplify the code, especially MoxaPortSetBaud. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, remove useless tty functionsJiri Slaby
- moxa_flush_chars -- no code; ldics handle this well - moxa_put_char -- only wrapper to moxa_write (same code), tty does this the same way if tty->driver->put_char is NULL Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, little cleanupJiri Slaby
Cleanup of - whitespace - macros - useless casts - return (sth); -> return sth; - types - superfluous parenthesis and braces - init tmp directly in moxa_get_serial_info - commented defunct code - commented prototypes - MOXA/moxa printk case Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, rework open/closeJiri Slaby
- add locking to open/close/hangup and ioctl (tiocm) - add pci hot-un-plug support (hangup on board remove, wait for openers) - cleanup block_till_ready - move close code common to close/hangup into separate function to be able to call it from open when hangup occurs while block_till_ready - let ldisc flush on tty layer, it will do it after we return Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, serialise timerJiri Slaby
- del timer after we are sure it won't be fired again - make timer scheduling atomic - don't reschedule timer when all cards have gone Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, cleanup rx/txJiri Slaby
- cleanup types - use tty_prepare_flip_string and io memcpys Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, merge 2 poll functionsJiri Slaby
- merge 2 timers into one -- one can handle the emptywait as good as the other - merge 2 separated poll functions into one, this allows handle the actions directly and simplifies the code Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, ioctl cleanupJiri Slaby
- allow stats only for sys_admin - move TCSBRK* processing to .break_ctl tty op - let TIOCGSOFTCAR and TIOCSSOFTCAR be processed by ldisc - remove MOXA_GET_MAJOR, MOXA_GET_CUMAJOR - fix jiffies subtraction by time_after - move moxa ioctl numbers into the header; still not exported to userspace, needs _IOC and 32/64 compat cleanup anyways Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, timer cleanupJiri Slaby
- schedule timer even after some card is installed, not after insmod - cleanup timer functions Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, centralize board readinessJiri Slaby
The only relevant sign of port being ready is its board->ready since now. Remove all other flags for this purpose which are set almost on the same place. Move ports inside the board to be sure that nobody will grab reference to the port without being sure that it exists. [jirislaby@gmail.com: fix unused var warning] Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, remove unused port entriesJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, remove port->portJiri Slaby
We don't need to hold a reference to port index. In most cases we need port structure anyway and index is available in port->tty->index. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, merge c2xx and c320 firmware loadingJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, add firmware loadingJiri Slaby
Substitute ioctl load firmware interface by kernel firmware api. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, fix TIOC(G/S)SOFTCAR paramJiri Slaby
according to ioctl_list, both have int * as a param, not ulong *. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, pci io space fixupJiri Slaby
- request region before remapping pci io space - use ioremap, iounmap istead of iomap interface, because we use readX/writeX for accessing this space because of isa support Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, cleanup module-param passed isa initJiri Slaby
Make the code more readable, remap the base address directly. Describe module parameters. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30Char: moxa, remove static isa supportJiri Slaby
Static ISA field is empty and probably will never be filled in, remove it. The driver still supports ISA cards passed through module parameter. This actually fixes one bug inside the initialization of module-param passed cards initialization. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08moxa: first pass at termios reportingAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18Char: moxa, remove sleep_onJiri Slaby
interruptible_sleep_on is deprecated, use completion instead Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18Char: moxa, function names cleanupJiri Slaby
prepend moxa_ to all moxa functions which laxes this Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18Char: moxa, cleanup printsJiri Slaby
- use dev_* where pdev is available (probe function) - add some printks on fail paths - add KERN_ macros otherwise - remove useless verbose variable - wrap lines to 80 cols at most Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18Char: moxa, fix and optimise empty timerJiri Slaby
moxa, fix and optimise empty timer don't wait and delete empty timer in empty timer function. Also fire next empty timer at rounded jiffies to save power. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17Char: moxa, eliminate busy waitingJiri Slaby
blah, moxa delays 250+ ms in busy waiting, use msleep instead. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08old buffer overflow in moxa driverdann frazier
I noticed that the moxa input checking security bug described by CVE-2005-0504 appears to remain unfixed upstream. The issue is described here: http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2005-0504 Debian has been shipping the following patch from Andres Salomon. (akpm: it's a privileged operation) Signed-off-by: dann frazier <dannf@hp.com> Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] Char: moxa, pci probingJiri Slaby
Alter the driver to use the pci probing. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-25 06:42:18 +0000