summaryrefslogtreecommitdiffstats
path: root/drivers/char/watchdog
AgeCommit message (Collapse)Author
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-02PCI: Cleanup the includes of <linux/pci.h>Jean Delvare
I noticed that many source files include <linux/pci.h> while they do not appear to need it. Here is an attempt to clean it all up. In order to find all possibly affected files, I searched for all files including <linux/pci.h> but without any other occurence of "pci" or "PCI". I removed the include statement from all of these, then I compiled an allmodconfig kernel on both i386 and x86_64 and fixed the false positives manually. My tests covered 66% of the affected files, so there could be false positives remaining. Untested files are: arch/alpha/kernel/err_common.c arch/alpha/kernel/err_ev6.c arch/alpha/kernel/err_ev7.c arch/ia64/sn/kernel/huberror.c arch/ia64/sn/kernel/xpnet.c arch/m68knommu/kernel/dma.c arch/mips/lib/iomap.c arch/powerpc/platforms/pseries/ras.c arch/ppc/8260_io/enet.c arch/ppc/8260_io/fcc_enet.c arch/ppc/8xx_io/enet.c arch/ppc/syslib/ppc4xx_sgdma.c arch/sh64/mach-cayman/iomap.c arch/xtensa/kernel/xtensa_ksyms.c arch/xtensa/platform-iss/setup.c drivers/i2c/busses/i2c-at91.c drivers/i2c/busses/i2c-mpc.c drivers/media/video/saa711x.c drivers/misc/hdpuftrs/hdpu_cpustate.c drivers/misc/hdpuftrs/hdpu_nexus.c drivers/net/au1000_eth.c drivers/net/fec_8xx/fec_main.c drivers/net/fec_8xx/fec_mii.c drivers/net/fs_enet/fs_enet-main.c drivers/net/fs_enet/mac-fcc.c drivers/net/fs_enet/mac-fec.c drivers/net/fs_enet/mac-scc.c drivers/net/fs_enet/mii-bitbang.c drivers/net/fs_enet/mii-fec.c drivers/net/ibm_emac/ibm_emac_core.c drivers/net/lasi_82596.c drivers/parisc/hppb.c drivers/sbus/sbus.c drivers/video/g364fb.c drivers/video/platinumfb.c drivers/video/stifb.c drivers/video/valkyriefb.c include/asm-arm/arch-ixp4xx/dma.h sound/oss/au1550_ac97.c I would welcome test reports for these files. I am fine with removing the untested files from the patch if the general opinion is that these changes aren't safe. The tested part would still be nice to have. Note that this patch depends on another header fixup patch I submitted to LKML yesterday: [PATCH] scatterlist.h needs types.h http://lkml.org/lkml/2007/3/01/141 Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-30[POWERPC] remove kernel module option for booke wdtDave Jiang
Remove option of making booke_wdt into a kernel module. This watchdog cannot be disabled. No point being a kernel module. Signed-off-by: Dave Jiang <djiang@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-18[PATCH] machzwd warning fixAndrew Morton
drivers/char/watchdog/machzwd.c: In function 'zf_ioctl': drivers/char/watchdog/machzwd.c:327: warning: passing argument 1 of 'zf_ping' makes integer from pointer without a cast Also some coding-style repairs. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@ftp.linux.org.uk> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-14Merge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] i8xx TCO driver - mark for removal
2007-03-14[PATCH] misc NULL noiseAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-11[WATCHDOG] i8xx TCO driver - mark for removalWim Van Sebroeck
Mark the i8xx TCO driver for removal. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-02-17[WATCHDOG] machzwd warning fixAndrew Morton
From: Andrew Morton <akpm@linux-foundation.org> drivers/char/watchdog/machzwd.c: In function 'zf_ioctl': drivers/char/watchdog/machzwd.c:327: warning: passing argument 1 of 'zf_ping' makes integer from pointer without a cast Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-14[PATCH] Scheduled removal of SA_xxx interrupt flags fixupsThomas Gleixner
The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Roland Dreier <rolandd@cisco.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Dave Airlie <airlied@linux.ie> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-13Merge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (23 commits) [WATCHDOG] timers cleanup [WATCHDOG] ib700wdt.c - convert to platform_device part 2 [WATCHDOG] ib700wdt.c - convert to platform_device [WATCHDOG] ib700wdt.c spinlock/WDIOC_SETOPTIONS changes [WATCHDOG] ib700wdt.c small clean-up's [WATCHDOG] ib700wdt.c clean-up init and exit routines [WATCHDOG] ib700_wdt.c stop + set_heartbeat operations [WATCHDOG] show default value for nowayout in module parameter [WATCHDOG] advantechwdt.c - convert to platform_device part 2 [WATCHDOG] advantechwdt.c - convert to platform_device [WATCHDOG] advantechwdt.c - move set_heartbeat to a seperate function [WATCHDOG] advantechwdt.c - cleanup before platform_device patches [WATCHDOG] acquirewdt.c - convert to platform_device part 2 [WATCHDOG] acquirewdt.c - convert to platform_device [WATCHDOG] acquirewdt.c - clean before platform_device patches [WATCHDOG] pcwd_usb.c - get heartbeat from dip switches [WATCHDOG] pcwd.c - e-mail adres update [WATCHDOG] pcwd_usb.c - get heartbeat from dip switches [WATCHDOG] pcwd_usb.c - document includes [WATCHDOG] pcwd_pci.c - spinlock fixes ...
2007-02-12[WATCHDOG] timers cleanupJiri Slaby
- Use timer macros to set function and data members and to modify expiration time. - Use DEFINE_TIMER for single (platform dependent) watchdog timers and do not init them at run-time in these cases. - del_timer_sync is common in most cases -- we want to wait for timer function if it's still running. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Steve Hill <steve@navaho.co.uk> Cc: Heiko Ronsdorf <hero@ihg.uni-duisburg.de> Cc: Fernando Fuganti <fuganti@conectiva.com.br> Cc: Gergely Madarasz <gorgo@itc.hu> Cc: Ken Hollis <khollis@bitgate.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-12[PATCH] mark struct file_operations const 3Arjan van de Ven
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] Char: use more PCI_DEVICE macroJiri Slaby
Use more PCI_DEVICE macro Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> (alim7101_wdt.c part) Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09[PATCH] misc NULL noise removalAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-08[POWERPC] ppc: Fix booke watchdog initializationStefan Roese
Fix two problems in the book-e watchdog driver. a) The 4xx default period was defined wrong b) Clear status before enabling the watchdog exception Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-27[WATCHDOG] ib700wdt.c - convert to platform_device part 2Wim Van Sebroeck
Convert the reboot_notifier into the platform_device's shutdown method Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-27[WATCHDOG] ib700wdt.c - convert to platform_deviceWim Van Sebroeck
Convert the ib700wdt watchdog into a platform_device Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-27[WATCHDOG] ib700wdt.c spinlock/WDIOC_SETOPTIONS changesWim Van Sebroeck
Add the WDIOC_SETOPTIONS ioctl call. Because of this we move the spinlocking to the different watchdog operations. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-27[WATCHDOG] ib700wdt.c small clean-up'sWim Van Sebroeck
* Fix identation * Add watchdog "mandatory" WDIOC_GETBOOTSTATUS ioctl * On unexpected close -> since this is considered as a write to the watchdog device, make sure we ping a last time. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-27[WATCHDOG] ib700wdt.c clean-up init and exit routinesWim Van Sebroeck
clean-up the init and exit routines so that they use the same sequence. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-27[WATCHDOG] ib700_wdt.c stop + set_heartbeat operationsWim Van Sebroeck
move the code to stop the watchdog and the code to set the heartbeat of the watchdog to seperate functions. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-27[WATCHDOG] show default value for nowayout in module parameterWim Van Sebroeck
change default=CONFIG_WATCHDOG_NOWAYOUT in the module parameter for nowayout by it's real value (0 or 1) by using: __MODULE_STRING(WATCHDOG_NOWAYOUT) Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-11[WATCHDOG] advantechwdt.c - convert to platform_device part 2Wim Van Sebroeck
Convert the reboot_notifier into the platform_device's shutdown method Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-11[WATCHDOG] advantechwdt.c - convert to platform_deviceWim Van Sebroeck
Convert the advantechwdt watchdog into a platform_device Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-11[WATCHDOG] advantechwdt.c - move set_heartbeat to a seperate functionWim Van Sebroeck
Put the set_heartbeat/timeout code into a seperate function Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-11[WATCHDOG] advantechwdt.c - cleanup before platform_device patchesWim Van Sebroeck
This cleanup consists of: - make sure that the printk's use the module/driver-name - do the exit of the module exactly the opposite of the init of the module Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-10[WATCHDOG] acquirewdt.c - convert to platform_device part 2Wim Van Sebroeck
Convert the reboot_notifier into the platform_device's shutdown method Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-10[WATCHDOG] acquirewdt.c - convert to platform_deviceWim Van Sebroeck
Convert the acquirewdt watchdog into a platform_device Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-10[WATCHDOG] acquirewdt.c - clean before platform_device patchesWim Van Sebroeck
Clean the current code before we convert the driver to a platform_device. This clean consists of: - document the includes - make sure that the printk's use the module/driver-name - do the exit of the module exactly the opposite of the init of the module Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-09[WATCHDOG] pcwd_usb.c - get heartbeat from dip switchesWim Van Sebroeck
The PCWD cards normally use the heartbeat that is set via the dip-switches of the card. There are only 3 switches, thus 8 combinations that each have a certain heartbeat. The card can however be programmed with a heartbeat from 1 till 65535 seconds. This is what our driver does: it programs the heartbeat on the card. There are however a lot of people that don't know that we set the heartbeat of the watchdog card to the value provided by the heartbeat module parameter. Instead they think that the heartbeat value is the same as set by the dip-switches. This patch changes the driver so that at startup you can take the heartbeat from the dip-switches. You do this by setting the heartbeat module parameter to 0. This patch also makes this the default behaviour. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-09[WATCHDOG] pcwd.c - e-mail adres updateWim Van Sebroeck
update Simon Machell's e-mail adres Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-08[WATCHDOG] pcwd_usb.c - get heartbeat from dip switchesWim Van Sebroeck
The PCWD cards normally use the heartbeat that is set via the dip-switches of the card. There are only 3 switches, thus 8 combinations that each have a certain heartbeat. The card can however be programmed with a heartbeat from 1 till 65535 seconds. This is what our driver does: it programs the heartbeat on the card. There are however a lot of people that don't know that we set the heartbeat of the watchdog card to the value provided by the heartbeat module parameter. Instead they think that the heartbeat value is the same as set by the dip-switches. This patch changes the driver so that at startup you can take the heartbeat from the dip-switches. You do this by setting the heartbeat module parameter to 0. This patch also makes this the default behaviour. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-08[WATCHDOG] pcwd_usb.c - document includesWim Van Sebroeck
document and review the include files. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-07[WATCHDOG] pcwd_pci.c - spinlock fixesWim Van Sebroeck
the keepalive and get_temperature functions should use spinlocks also. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-07[WATCHDOG] pcwd_pci.c - get heartbeat from dip switchesWim Van Sebroeck
The PCWD cards normally use the heartbeat that is set via the dip-switches of the card. There are only 3 switches, thus 8 combinations that each have a certain heartbeat. The card can however be programmed with a heartbeat from 1 till 65535 seconds. This is what our driver does: it programs the heartbeat on the card. There are however a lot of people that don't know that we set the heartbeat of the watchdog card to the value provided by the heartbeat module parameter. Instead they think that the heartbeat value is the same as set by the dip-switches. This patch changes the driver so that at startup you can take the heartbeat from the dip-switches. You do this by setting the heartbeat module parameter to 0. This patch also makes this the default behaviour. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-12-19[WATCHDOG] fix clk_get() error checkAkinobu Mita
The return value of clk_get() should be checked by IS_ERR(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-12-18[WATCHDOG] s3c2410_wdt exit driver via labelsBen Dooks
Cleanup the s3c2410_wdt driver's exit point by using labels instead of multiple returns. Also remove the checks for the resources having been allocate in the exit, as we will now either have fully allocated or not allocated the resources at-all. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-12-12Merge branch 'master' of ↵Wim Van Sebroeck
master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
2006-12-12[WATCHDOG] pcwd_usb.c generic HID include fileWim Van Sebroeck
Now that the generic HID layer created include/linux/hid.h we can use the HID_REQ_SET_REPORT and HID_DT_REPORT defines directly from that include file. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-12-07Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (76 commits) [ARM] 4002/1: S3C24XX: leave parent IRQs unmasked [ARM] 4001/1: S3C24XX: shorten reboot time [ARM] 3983/2: remove unused argument to __bug() [ARM] 4000/1: Osiris: add third serial port in [ARM] 3999/1: RX3715: suspend to RAM support [ARM] 3998/1: VR1000: LED platform devices [ARM] 3995/1: iop13xx: add iop13xx support [ARM] 3968/1: iop13xx: add iop13xx_defconfig [ARM] Update mach-types [ARM] Allow gcc to optimise arm_add_memory a little more [ARM] 3991/1: i.MX/MX1 high resolution time source [ARM] 3990/1: i.MX/MX1 more precise PLL decode [ARM] 3986/1: H1940: suspend to RAM support [ARM] 3985/1: ixp4xx clocksource cleanup [ARM] 3984/1: ixp4xx/nslu2: Fix disk LED numbering (take 2) [ARM] 3994/1: ixp23xx: fix handling of pci master aborts [ARM] 3981/1: sched_clock for PXA2xx [ARM] 3980/1: extend the ARM Versatile sched_clock implementation from 32 to 63 bit [ARM] 3979/1: extend the SA11x0 sched_clock implementation from 32 to 63 bit period [ARM] 3978/1: macro to provide a 63-bit value from a 32-bit hardware counter ...
2006-12-07[WATCHDOG] watchdog miscdevice patchAndrew Victor
It looks like the recent changes to 'struct miscdevice' have impacted some of the Watchdog drivers. at91rm9200_wdt.c:205: error: 'struct miscdevice' has no member named 'dev' For the AT91RM9200 driver I just replaced "miscdevice.dev" with "miscdevice.parent". The mpcore_wdt.c and omap_wdt.c seem similarly affected. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-12-07[WATCHDOG] rm9k_wdt: fix interrupt handler argumentsThomas Koeller
Removed 'struct pt_regs *' from interrupt handler arguments. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-12-07[WATCHDOG] rm9k_wdt: fix compilationThomas Koeller
Driver did not compile any more. Someone moved the definition of 'struct miscdevice miscdev' to a place near the end of the file, after some code that was refering to this variable. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-12-07[PATCH] slab: remove SLAB_ATOMICChristoph Lameter
SLAB_ATOMIC is an alias of GFP_ATOMIC Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-01Merge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] MIPS RM9000 on-chip watchdog device - patch 4 [WATCHDOG] MIPS RM9000 on-chip watchdog device - patch 3 [WATCHDOG] MIPS RM9000 on-chip watchdog device - patch 2 [WATCHDOG] MIPS RM9000 on-chip watchdog device - patch 1 [WATCHDOG] MIPS RM9000 on-chip watchdog device [WATCHDOG] Add iTCO vendor specific support [WATCHDOG] sc1200wdt.c pnp unregister fix. [WATCHDOG] config.h removal [WATCHDOG] NS pc87413-wdt Watchdog driver - fixes [WATCHDOG] NS pc87413-wdt Watchdog driver v1.1 [WATCHDOG] NS pc87413-wdt Watchdog driver
2006-12-01usb: pcwd_usb free urb cleanupMariusz Kozlowski
- usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-30[ARM] 3954/1: AT91: Update drivers for new headersAndrew Victor
This patch updates the drivers (and other files) which include the hardware headers. This fixes the breakage introduced in patches 3950/1 and 3951/1 (those patches were getting big). The AVR32 architecture uses the same serial driver and had its own copy of at91rm9200_pdc.h. Renamed it to at91_pdc.h Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30Merge ../linux-2.6-watchdog-mmWim Van Sebroeck
2006-11-17[WATCHDOG] MIPS RM9000 on-chip watchdog device - patch 4Wim Van Sebroeck
a number of small patches: - include notifier.h include file - re-arrange prototype functions - remove =0 initializations - change printk logging levels to what's used in other drivers - /dev/watchdog is a VFS so use nonseekable_open - Style: Instead of "if (constant op function_or_variable)" we prefer "if (function_or_variable op constant)" - arg is a __user pointer - use MAX_TIMEOUT_SECONDS instead of 32 in WDIOC_SETTIMEOUT Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-11-17[WATCHDOG] MIPS RM9000 on-chip watchdog device - patch 3Wim Van Sebroeck
Move start and stop code into seperate functions Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-23 06:34:15 +0000