summaryrefslogtreecommitdiffstats
path: root/drivers/char
AgeCommit message (Collapse)Author
2006-09-01[PATCH] IPMI: fix occasional oops on module unloadCorey Minyard
Olaf Kirch of SuSE tracked down a problem where module unloads of the IPMI driver would occasionally result in Oopses. He tracked that down to a variable that wasn't always initialized properly in some situations. This patch initializes that variable. Olaf sent a patch that kzalloc-ed the data, but this structure is large enough that I would perfer to not do that. Thanks Olaf! Signed-off-by: Corey Minyard <minyard@acm.org> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-01[PATCH] SBC8360: module_param() permission fixesIan E. Morgan
The last argument of module_param is permissions, not default value. Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-01[PATCH] synclink_gt: fix receive tty error handlingPaul Fulghum
Fix receive tty error handling in synclink_gt driver. Adrian reported compiler warning for incorrect bit test against char variable. I determined these and other device specific error bits were incorrectly defined. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-30[PATCH] drm: radeon flush TCL VAP for vertex program enable/disableRoland Scheidegger
The radeon requires a VAP state flush when enabling/disabling vertex programs on the r200 cards. Signed-off-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27[PATCH] Fix tty layer DoS and comment relevant codeAlan Cox
Unlike the other tty comment patch this one has code changes. Specifically it limits the queue size for a tty to 64K characters (128Kbytes) worst case even if the tty is ignoring tty->throttle. This is because certain drivers don't honour the throttle value correctly, although it is a useful safeguard anyway. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27[PATCH] tty layer comment the locking assumptions and functions somewhatAlan Cox
Doesn't fix them but does show up some interesting areas that need review and fixing. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27[PATCH] vcsa attribute bits -> ioctl(VT_GETHIFONTMASK)Samuel Thibault
When reading /dev/vcsa while a font with more than 256 characters is loaded, one of the attribute bits records the 9th bit of the character. But depending on the console driver (vgacon or fbcon for instance), that's bit 3 or bit 0. And there is no way for userland to know that, thus no way for userland to safely grab the screen content. So here is a (tested) patch: Add a VT_GETHIFONTMASK ioctl for knowing which bit is the 9th bit for VC text (vc_hi_font_mask field of the vc_data structure). Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27[PATCH] char/moxa.c: fix endianess and multiple-card issuesDirk Eibach
While testing Moxa C218T/PCI on PowerPC 405EP I found that loading firmware using the linux kernel driver fails because calculation of the checksum is not endianess independent in the original code. After I fixed this I found that uploading firmware in a system with multiple cards causes a kernel oops. I had a look in the recent moxa sources and found that they do some kind of locking there. Applying this lock fixed the problem. Alan sayeth: Checksum changes are clearly correct. Other changes is an improvement but not I think enough to handle malicious firmware attacks. That said such an attacker has CAP_SYS_RAWIO anyway so that part is irrelevant except for neatness. [akpm@osdl.org: cleanups] Signed-off-by: Dirk Eibach <eibach@gdsys.de> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27[PATCH] tty: remove bogus call to cdev_del()Rolf Eike Beer
When cdev_add() failed there is no reason to call cdev_del(). Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-15[WATCHDOG] Kconfig typos fix.Matt LaPlante
Three typos in drivers/char/watchdog/Kconfig... Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-08-06Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: (24 commits) Input: ati_remote - use msec instead of jiffies Input: ati_remote - add missing input_sync() Input: ati_remote - relax permissions sysfs module parameters Input: ati_remote - make filter time a module parameter Input: atkbd - restore repeat rate when resuming Input: trackpoint - activate protocol when resuming Input: logips2pp - fix button mapping for MX300 Input: keyboard - change to use kzalloc Input: serio/gameport - check whether driver core calls succeeded Input: spaceball - make 4000FLX Lefty work Input: keyboard - simplify emulate_raw() implementation Input: keyboard - remove static variable and clean up initialization Input: hiddev - use standard list implementation Input: add missing handler->start() call Input: HID - fix potential out-of-bound array access Input: fix list iteration in input_release_device() Input: iforce - add Trust Force Feedback Race Master support Input: iforce - check array bounds before accessing elements Input: libps2 - warn instead of oopsing when passed bad arguments Input: fm801-gp - fix use after free ...
2006-08-06[PATCH] pSeries: hvsi char driver janitorial cleanupLinas Vepstas
A set of tty line discipline cleanup patches were introduced before the dawn of time, in kernel version 2.4.21. This patch performs that cleanup for the hvsi driver. The hvsi driver is used only on IBM pSeries PowerPC boxes. The driver was originally written by Hollis Blanchard, who has delegated maintainership to me. So this my first and maybe only patch in this official new role, because this driver is otherwise bug-free :-) Alan: "Actually its also a bug fix, tty->ldisc should be locked by refcounting and the helpers do this for you." Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] pSeries hvsi char driver null pointer derefLinas Vepstas
Under certain rare circumstances, it appears that there can be be a NULL-pointer deref when a user fiddles with terminal emeulation programs while outpu is being sent to the console. This patch checks for and avoids a NULL-pointer deref. Signed-off-by: Hollis Blanchard <hollisbl@austin.ibm.com> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: Paul Fulghum <paulkf@microgate.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] omap-rng build fixDavid Brownell
Seems like the omap-rng driver in the main tree predates the switch from <asm/hardware/clock.h> to <linux/clk.h> ... now it builds OK. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-04Input: keyboard - change to use kzallocDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-04Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 ↵Dmitry Torokhov
into for-linus
2006-08-03Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fix show_mem for VIRTUAL_MEM_MAP+FLATMEM [IA64] align high endpoint of VIRTUAL_MEM_MAP [PATCH] Fix RAID5 + IA64 compile [IA64] Don't alloc empty frame in ia64_switch_mode_phys [IA64] Do not assume output registers be reservered. [IA64] add platform check to snsc driver init [IA64] sparse cleanups [IA64] Fix breakage in simscsi.c [IA64] Format /proc/pal/*/version_info correctly
2006-08-02[IA64] add platform check to snsc driver initGreg Edwards
Add a platform check to the snsc driver init function, to prevent loading on non-sn2 systems. Signed-off-by: Greg Edwards <edwardsg@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-07-31[PATCH] hwrng: fix geode probe error unwindMichael Buesch
The geode hwrng leaks an iomapped resource, if hwrng_register() fails. This fixes it. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-31[PATCH] hwrng: fix intel probe error unwindMichael Buesch
The intel hwrng leaks an iomapped resource, if hwrng_register() failes. This fixes it. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-31[PATCH] drivers/char/pc8736x_gpio.c: unexport a static structAdrian Bunk
A static struct mustn't be exported. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-21[WAN]: Converted synclink drivers to use netif_carrier_*()Krzysztof Halasa
WAN: Converted synclink drivers to use netif_carrier_*() instead of hdlc_set_carrier(). Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-19Input: keyboard - simplify emulate_raw() implementationDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-19Input: keyboard - remove static variable and clean up initializationDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-14[PATCH] tpm_tis: use resource_size_tKylene Jo Hall
Fix the start and len variables that should be using the new resource_size_t. Signed_off_by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14[PATCH] tpm: Add force device probe optionKylene Jo Hall
Some machine manufacturers are not sticking to the TCG specifications and including an ACPI DSDT entry for the TPM which allows PNP discovery of the device. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14[PATCH] tpm: interrupt clear fixKylene Jo Hall
Under stress testing I found that the interrupt is not always cleared. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14[PATCH] TPM: fix failure path leakRandy Dunlap
kfree(devname) on the misc_register() failure path. Otherwise it is lost forever. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14[PATCH] gpio: rename exported vtables to better match purposeJim Cromie
- rename EXPORTed gpio vtables from {scx200,pc8736x}_access to _gpio_ops new name is much closer to the vtable-name struct nsc_gpio_ops, should be clearer. Also rename the _fops vtable var to _fileops to better disambiguate it from the gpio vtable. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14[PATCH] gpio: cosmetics: remove needless newlinesJim Cromie
- pure cosmetics: lose needless newlines. - rename EXPORTed gpio vtables from {scx200,pc8736x}_access to _gpio_ops new name is much closer to the vtable-name struct nsc_gpio_ops, should be clearer. Also rename the _fops vtable var to _fileops to better disambiguate it from the gpio vtable. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14[PATCH] gpio: drop vtable members .gpio_set_high .gpio_set_low gpio_set is ↵Jim Cromie
enough drops gpio_set_high, gpio_set_low from the nsc_gpio_ops vtable. While we can't drop them from scx200_gpio (or can we?), we dont need them for new users of the exported vtable; gpio_set(1), gpio_set(0) work fine. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14[PATCH] scx200_gpio: use 1 cdev for N minors, not N for NJim Cromie
Remove the scx200_gpio's cdev-array & ksalloc, replacing it with a single static struct cdev, which is sufficient for all the pins. cdev_put is commented out since kernel wont link properly with it, and its apparently not needed. With these patches, this driver continues to work with Chris Boot's leds_48xx driver. Signed-off-by Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14[PATCH] scx200_gpio: 1 cdev for N minors: cleanup, prepJim Cromie
this patch is mostly cleanup of scx200_gpio : - drop #include <linux/config.h> - s/DEVNAME/DRVNAME/ apparently a convention - replace variable num_pins with #define MAX_PINS - s/dev/devid/ to clarify that its a dev_t, not a struct device dev. - move devid = MKDEV(major,0) into branch where its needed. 2 minor 'changes' : - reduced MAX_PINS from 64 to 32. Ive never tested other pins, and theyre all multiplexed with other functions, some of which may be in use on my soekris 4801, so I dont know what testing should yield. - +EXPORT_SYMBOL(scx200_access); This exposes the driver's vtable, which another driver can use along with #include <linux/nsc_gpio.h>, to manipulate a gpio-pin. Signed-off-by Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-13[MIPS] vr41xx: Move IRQ numbers to asm-mips/vr41xx/irq.hYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-12[PATCH] lockdep: HPET/RTC fixIngo Molnar
Joseph Fannin reported that hpet_rtc_interrupt() enables hardirqs in irq context: [ 25.628000] [<c014af4e>] trace_hardirqs_on+0xce/0x200 [ 25.628000] [<c036cf21>] _spin_unlock_irq+0x31/0x70 [ 25.628000] [<c0296584>] rtc_get_rtc_time+0x44/0x1a0 [ 25.628000] [<c01198bb>] hpet_rtc_interrupt+0x21b/0x280 [ 25.628000] [<c0161141>] handle_IRQ_event+0x31/0x70 [ 25.628000] [<c0162d37>] handle_edge_irq+0xe7/0x210 [ 25.628000] [<c0106192>] do_IRQ+0x92/0x120 [ 25.628000] [<c0104121>] common_interrupt+0x25/0x2c the call of rtc_get_rtc_time() is highly suspect. At a minimum we need the patch below to save/restore hardirq state. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Joseph Fannin <jfannin@gmail.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10[PATCH] snsc: switch from force_sig to kill_procChristoph Hellwig
Currently the snsc driver uses force_sig to send init a SIGPWR when the system overheats. This patch switches it to kill_proc instead which has the following advantages: (1) gets rid of one of the last remaining tasklist_lock users in modular code (2) simplifies the snsc code significantly The downside is that an init implementation could in theory block SIGPWR and it would not get delivered. The sysvinit code used by all major distributions doesn't do this and blocking this signal in init would be a rather stupid thing to do. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10[PATCH] pc8736x_gpio: fix re-modprobe errors: fix/finish cdev-initJim Cromie
- Switch from register_chrdev() to (register|alloc)_chrdev_region(). - use a cdev. This was intended for original patchset, but was overlooked. We use a single cdev for all pins (minor device-numbers), as gleaned from cs5535_gpio, and in contrast to whats currently done in scx200_gpio (which I'll fix soon) Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10[PATCH] pc8736x_gpio: fix re-modprobe errors: undo region reservationJim Cromie
Fix module-init-func by repairing usage of platform_device_del/put in module-exit-func. IOW, it imitates Ingo's 'mishaps' patch, which fixed the module-init-func's undo handling. Also fixes lack of release_region to undo the earlier registration. Also starts to 'use a cdev' which was originally intended (its present in scx200_gpio). Code compiles and runs, exhibits a lesser error than previously. (re-register-chrdev fails) Since I had to add "include <linux/cdev.h>", I went ahead and made 2 tweaks that fell into diff-context-window: - remove include <linux/config.h> everyone's doing it - copyright updates - current date is 'wrong' Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10[PATCH] pc8736x_gpio: fix re-modprobe errors: define and use constantsJim Cromie
add constant defines - preparatory patch - adds #define CONSTs for max-pin, gpio-addr-range (for reserving region) - fix wrong max-pin check in gpio_open() - add 'Winbond' to module description. NSC sold the product, Winbond has supported us / lm-sensors Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10[PATCH] char/rtc: Handle memory-mapped chips properlyMaciej W. Rozycki
Handle memory-mapped chips properly, needed for example on DECstations. This support was in Linux 2.4 but for some reason got lost in 2.6. This patch is taken directly from the linux-mips repository. [akpm@osdl.org: cleanup] Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Cc: Paul Gortmaker <penguin@muskoka.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10[PATCH] make valid_mmap_phys_addr_range() take a pfnLennert Buytenhek
Newer ARMs have a 40 bit physical address space, but mapping physical memory above 4G needs a special page table format which we (currently?) do not use for userspace mappings, so what happens instead is that mapping an address >= 4G will happily discard the upper bits and wrap. There is a valid_mmap_phys_addr_range() arch hook where we could check for >= 4G addresses and deny the mapping, but this hook takes an unsigned long address: static inline int valid_mmap_phys_addr_range(unsigned long addr, size_t size); And drivers/char/mem.c:mmap_mem() calls it like this: static int mmap_mem(struct file * file, struct vm_area_struct * vma) { size_t size = vma->vm_end - vma->vm_start; if (!valid_mmap_phys_addr_range(vma->vm_pgoff << PAGE_SHIFT, size)) So that's not much help either. This patch makes the hook take a pfn instead of a phys address. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10[PATCH] powerpc: fix trigger handling in the new irq codeBenjamin Herrenschmidt
This patch slightly reworks the new irq code to fix a small design error. I removed the passing of the trigger to the map() calls entirely, it was not a good idea to have one call do two different things. It also fixes a couple of corner cases. Mapping a linux virtual irq to a physical irq now does only that. Setting the trigger is a different action which has a different call. The main changes are: - I no longer call host->ops->map() for an already mapped irq, I just return the virtual number that was already mapped. It was called before to give an opportunity to change the trigger, but that was causing issues as that could happen while the interrupt was in use by a device, and because of the trigger change, map would potentially muck around with things in a racy way. That was causing much burden on a given's controller implementation of map() to get it right. This is much simpler now. map() is only called on the initial mapping of an irq, meaning that you know that this irq is _not_ being used. You can initialize the hardware if you want (though you don't have to). - Controllers that can handle different type of triggers (level/edge/etc...) now implement the standard irq_chip->set_type() call as defined by the generic code. That means that you can use the standard set_irq_type() to configure an irq line manually if you wish or (though I don't like that interface), pass explicit trigger flags to request_irq() as defined by the generic kernel interfaces. Also, using those interfaces guarantees that your controller set_type callback is called with the descriptor lock held, thus providing locking against activity on the same interrupt (including mask/unmask/etc...) automatically. A result is that, for example, MPIC's own map() implementation calls irq_set_type(NONE) to configure the hardware to the default triggers. - To allow the above, the irq_map array entry for the new mapped interrupt is now set before map() callback is called for the controller. - The irq_create_of_mapping() (also used by irq_of_parse_and_map()) function for mapping interrupts from the device-tree now also call the separate set_irq_type(), and only does so if there is a change in the trigger type. - While I was at it, I changed pci_read_irq_line() (which is the helper I would expect most archs to use in their pcibios_fixup() to get the PCI interrupt routing from the device tree) to also handle a fallback when the DT mapping fails consisting of reading the PCI_INTERRUPT_PIN to know wether the device has an interrupt at all, and the the PCI_INTERRUPT_LINE to get an interrupt number from the device. That number is then mapped using the default controller, and the trigger is set to level low. That default behaviour works for several platforms that don't have a proper interrupt tree like Pegasos. If it doesn't work for your platform, then either provide a proper interrupt tree from the firmware so that fallback isn't needed, or don't call pci_read_irq_line() - Add back a bit that got dropped by my main rework patch for properly clearing pending IPIs on pSeries when using a kexec Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10[PATCH] Add Specialix IO8+ card support hotplug supportChuck Short
Patch Description: Add "Specialix IO8+ card support" hotplug support patch location: http://www.kernel.org/git/?p=linux/kernel/git/bcollins/ubuntu-dapper.git;a=commitdiff;h=d795cfc591bb44f6b3d86d8f054a227cecb44bb4 [akpm@osdl.org: cleanup] Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Chuck Short <zulcss@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10[PATCH] Add Computone IntelliPort Plus serial hotplug supportChuck Short
Patch Description: Add "Computone IntelliPort Plus serial" hotplug support patch location: http://www.kernel.org/git/?p=linux/kernel/git/bcollins/ubuntu-dapper.git;a=commitdiff;h=8c36723187c0fa5efe0e5c6a9b1e66ed4b824792 [akpm@osdl.org: cleanup] Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Chuck Short <zulcss@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-06Input: introduce input_inject_event() functionDmitry Torokhov
Create input_inject_event() function which is to be used by input handlers as opposed to input_event() which is reserved for drivers implementing input devices. The difference is that if device is "grabbed" by some process input_inject_event() will ignore events unless sent from the handle that is currently owns the device. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-06Input: add start() method to input handlersDmitry Torokhov
The new start() method is called immediately after connect() and also when "grabbed" device is released by its owner. This will allow input handlers to re-synchronize state of once-grabbed device with the rest of devices. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: add defconfig for Freescale MPC8349E-mITX board powerpc: Add base support for the Freescale MPC8349E-mITX eval board Documentation: correct values in MPC8548E SEC example node [POWERPC] Actually copy over i8259.c to arch/ppc/syslib this time [POWERPC] Add new interrupt mapping core and change platforms to use it [POWERPC] Copy i8259 code back to arch/ppc [POWERPC] New device-tree interrupt parsing code [POWERPC] Use the genirq framework [PATCH] genirq: Allow fasteoi handler to retrigger disabled interrupts [POWERPC] Update the SWIM3 (powermac) floppy driver [POWERPC] Fix error handling in detecting legacy serial ports [POWERPC] Fix booting on Momentum "Apache" board (a Maple derivative) [POWERPC] Fix various offb and BootX-related issues [POWERPC] Add a default config for 32-bit CHRP machines [POWERPC] fix implicit declaration on cell. [POWERPC] change get_property to return void *
2006-07-03[PATCH] sched: cleanup, remove task_t, convert to struct task_structIngo Molnar
cleanup: remove task_t and convert all the uses to struct task_struct. I introduced it for the scheduler anno and it was a mistake. Conversion was mostly scripted, the result was reviewed and all secondary whitespace and style impact (if any) was fixed up by hand. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[PATCH] lockdep: print all lock classes on SysRQ-DIngo Molnar
Print all lock-classes on SysRq-D. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[PATCH] lockdep: locking init debugging improvementIngo Molnar
Locking init improvement: - introduce and use __SPIN_LOCK_UNLOCKED for array initializations, to pass in the name string of locks, used by debugging Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>