summaryrefslogtreecommitdiffstats
path: root/drivers/clocksource/sh_cmt.c
AgeCommit message (Collapse)Author
2012-03-16PM / shmobile: Make CMT driver use pm_genpd_dev_always_on()Rafael J. Wysocki
Make the CMT clocksource driver mark its device as "always on" using pm_genpd_dev_always_on() to protect it from surprise power removals. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: stable@vger.kernel.org
2011-10-31drivers/clocksource: Add module.h to those who were using it implicitlyPaul Gortmaker
A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in clocksource are actually calling out for <module.h> explicitly in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-21clocksource: sh_cmt: wait for CMCNT on init V2Magnus Damm
Add code to the CMT driver to wait for CMCNT V2. This to let the register value settle before starting the timer channel. Makes the driver more robust. Needed for CMT2 on sh7372 and certain CMT channels on sh73a0. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-31Revert "clocksource: sh_cmt: Runtime PM support"Paul Mundt
This reverts commit 01fa68b58492a5d6708a91c1f474b6a099a9509e. The same note as per the sh_tmu change applies here, too. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-23clocksource: sh_cmt: Runtime PM supportMagnus Damm
Add Runtime PM support to the CMT driver. The hardware device is enabled as long as the clocksource or the clockevent portion of the driver is used. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-23clocksource: sh_cmt: __clocksource_updatefreq_hz() updateMagnus Damm
This patch updates the clocksource part of the CMT driver to make use of the __clocksource_updatefreq_hz() function. Without this patch the old code uses clocksource_register() together with a hack that assumes a never changing clock rate (see clk_enable(), clk_get_rate() and clk_disable()). The patch uses clocksource_register_hz() with 1 Hz as initial value, then lets the ->enable() callback update the value with __clocksource_updatefreq_hz() once the struct clk has been enabled and the frequency is stable. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-17clocksource: sh_cmt: Remove nested spinlock fixTakashi YOSHII
There are control flow that sh_cmt_set_next() does double spin-lock. The callers sh_cmt_{start,stop}() already have lock. But another callers sh_cmt_clock_event_{start,next}() does not. Now sh_cmt_set_next() does not lock by itself. All the callers should hold spin-lock before calling it. [damm@opensource.se: use __sh_cmt_set_next() to simplify code] [damm@opensource.se: added stable, suitable for v2.6.35 + v2.6.36] Cc: stable@kernel.org Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-31ARM: shmobile: remove sh_timer_config clk memberMagnus Damm
Now when the SH-Mobile ARM platforms have been converted to use device name it is possible to remove "clk" from struct sh_timer_config. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-04clocksource: sh_cmt: Rate calculation fixMagnus Damm
Fix the rate calculation in the CMT driver. Without this fix the clocksource runs way too fast and we get a divide-by-zero error. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-04clocksource: sh_cmt: One-off clockevent fix V2Magnus Damm
Fix a one-off error in the CMT driver V2. The match register should be programmed with the period minus one. Many thanks to Eiraku-san for tracking down this issue. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-22clocksource: sh_cmt: Fix up bogus shift value.Paul Mundt
The previous CMT fixup accidentally copied in the TMU shift value, reset this back to its original value while preserving the TMU fix. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02clocksource: sh_cmt: compute mult and shift before registrationPaul Mundt
Based on the sh_tmu change in 66f49121ffa41a19c59965b31b046d8368fec3c7 ("clocksource: sh_tmu: compute mult and shift before registration"). The same issues impact the sh_cmt driver, so we take the same approach here. Cc: stable@kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-26Merge branch 'sh/stable-updates'Paul Mundt
Conflicts: arch/sh/kernel/dwarf.c drivers/dma/shdma.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-15sh: Disable IRQ balancing for timer and IPI IRQs.Paul Mundt
Make sure that the timer IRQs and IPIs aren't enabled for IRQ balancing. IPIs are disabled as a result of being percpu while the timers simply disable balancing outright. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-29clocksource: Deprecate clock string across the SH drivers.Paul Mundt
We want to get rid of the clock string from platform data entirely, depending on the clkdev-based clock lookup to do the right thing for us instead. This converts all of the SH drivers to request their associated function clocks directly, and if there is no match for that then we fall back on the legacy lookup while warning about it. After all of the outstanding CPUs have been converted to clkdev lookups the clock string will be killed off completely. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-10clocksource: Use dev_name() universally across the SH drivers.Paul Mundt
There is no need to copy in the name from the sh timer config now that dev_name() is available early. We prefer the dev_name() variant for consistent naming. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-01Merge branch 'timers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: posix-timers.c: Don't export local functions clocksource: start CMT at clocksource resume clocksource: add suspend callback clocksource: add argument to resume callback ntp: Cleanup xtime references in ntp.c ntp: Make time_esterror and time_maxerror static
2010-02-25clocksource: Fix up a registration/IRQ race in the sh drivers.Paul Mundt
All of the SH clocksource drivers follow the scheme that the IRQ is setup prior to registering the clockevent. The interrupt handler in the clockevent cases looks to the event handler function pointer being filled in by the registration code, permitting us to get in to situations where asserted IRQs step in to the handler before registration has had a chance to complete and hitting a NULL pointer deref. In practice this is not an issue for most platforms, but some of them with fairly special loaders (or that are chain-loading from another kernel) may enter in to this situation. This fixes up the oops reported by Rafael on hp6xx. Reported-and-tested-by: Rafael Ignacio Zurita <rafaelignacio.zurita@gmail.com> Cc: stable@kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05clocksource: start CMT at clocksource resumeMagnus Damm
Add code to start the CMT timer on clocksource resume. While at it handle the suspend case as well. Remove the platform device specific suspend calls. This makes sure the timer is started during sysdev_resume(). Without this patch the clocksource may be read as suspended, this after sysdev resume but before platform device resume. Signed-off-by: Magnus Damm <damm@opensource.se> Cc: john stultz <johnstul@us.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-15sh: CMT suspend/resumeMagnus Damm
This patch updates the SuperH CMT driver with suspend and resume callbacks for the suspend-to-ram case. This patch stops the CMT channel at suspend time to avoid unwanted wake up events. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17sh: turn off irqs when disabling CMT/TMU timersMagnus Damm
Modify the CMT and TMU drivers to disable interrupts when disabling the timer. Only using start/stop bits is not enough. This fixes a bootup hang on Migo-R when the CMT is replaced by TMU for clockevents but the CMT keeps on delivering irqs even though the timer start bit is off. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14clocksource: Drop unused irqaction.mask from SH drivers.Paul Mundt
The irqaction.mask is legacy code that is wholly unused and going away, so simply drop its use in the SH drivers completely. Fixes up build failures in -next. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-03clocksource: sh_mtu2/cmt_register() should be static.Paul Mundt
Neither of these need to be exported, so just make them static. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-03sh: Consolidate MTU2/CMT/TMU timer platform data.Paul Mundt
All of the SH timers use a roughly identical structure for platform data, which presently is broken out for each block. Consolidate all of these definitions, as there is no reason for them to be broken out in the first place. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-30clocksource: sh_cmt 16-bit fixesMagnus Damm
This patch contains various fixes for 16-bit cmt hardware. With this applied periodic clockevents work fine on sh7203. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-28sh: setup timers in late_time_init()Magnus Damm
This patch moves the SuperH timer setup code from time_init() to late_time_init(). Good things about this change: - interrupts: they are enabled at late_time_init() - mm: regular kmalloc() can be used at late_time_init() Together with moving to late_time_init() this patch changes the sh_cmt driver to always allocate with kmalloc(). This simplifies the code a bit and also fixes section mismatches. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-28clocksource: improve sh_cmt clocksource overflow handlingMagnus Damm
This patch improves the sh_cmt clocksource handling. Currently the counter value is ignored in the case of overflow. With this patch the overflow flag is read before and after reading the counter, removing any counter value and overflow flag mismatch issues. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-22clocksource: sh_cmt clocksource supportMagnus Damm
Add clocksource support to the sh_cmt driver. With this in place we can do tickless with a single CMT channel. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-19clocksource: sh_cmt earlytimer supportMagnus Damm
Add Early Platform Driver support to the sh_cmt driver using the earlytimer class. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-02clocksource: sh_cmt: use remove_irq() and remove clockevent workaroundMagnus Damm
Update the sh_cmt driver to make use of recent irq and clockevent changes: - use remove_irq() together with setup_irq() - remove mult workaround since WARN_ON() now has been moved Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29sh: CMT clockevent platform driverMagnus Damm
SuperH CMT clockevent driver. Both 16-bit and 32-bit CMT versions are supported, but only 32-bit is tested. This driver contains support for both clockevents and clocksources, but no unregistration is supported at this point. Works fine as clock source and/or event in periodic or oneshot mode. Tested on sh7722 and sh7723, but should work with any cpu/architecture. This version is lacking clocksource and early platform driver support for now - this to minimize the amount of dependencies. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>