summaryrefslogtreecommitdiffstats
path: root/drivers/cpufreq/acpi-cpufreq.c
AgeCommit message (Collapse)Author
2013-04-02cpufreq: Notify all policy->cpus in cpufreq_notify_transition()Viresh Kumar
policy->cpus contains all online cpus that have single shared clock line. And their frequencies are always updated together. Many SMP system's cpufreq drivers take care of this in individual drivers but the best place for this code is in cpufreq core. This patch modifies cpufreq_notify_transition() to notify frequency change for all cpus in policy->cpus and hence updates all users of this API. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-25cpufreq: acpi-cpufreq: Don't set policy->related_cpus from .init()Viresh Kumar
With the addition of following patch: fcf8058 cpufreq: Simplify cpufreq_add_dev() cpufreq driver's .init() routine must initialize policy->cpus with mask of all possible CPUs (Online + Offline) that share the clock. Then the core would copy this mask onto policy->related_cpus and will reset policy->cpus to carry only online cpus. acpi-cpufreq driver wasn't updated with this assumption and so sometimes when we try to hot[un]plug CPUs at run time, sysfs directories get corrupted. This patch fixes acpi-cpufreq driver against this corruption. Reported-and-tested-by: Maciej Rutecki <maciej.rutecki@gmail.com> Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-02cpufreq: governors: implement generic policy_is_sharedFabio Baltieri
Implement a generic helper function policy_is_shared() to replace the current dbs_sw_coordinated_cpus() at cpufreq level, so that it can be used by code other than cpufreq governors. Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-02acpi-cpufreq: Do not load on K8Matthew Garrett
de3ed81d746d ("[CPUFREQ] Change link order of x86 cpufreq modules") changed cpufreq drivers link order so that powernow-k8 gets loaded first due to earlier K8s having BIOS bugs. However, now that acpi-cpufreq supports both AMD and Intel CPUs with HW P-states, we want to load it first, so that cases where acpi-cpufreq and powernow-k8 are both built-in and powernow-k8 initializing first, can be addressed. So, make sure that even if acpi-cpufreq gets loaded first, it errors out on K8s and powernow-k8 can be loaded then successfully. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> References: http://lkml.kernel.org/r/20130118162347.GA31499@srcf.ucam.org Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-22cpufreq: Add module aliases for acpi-cpufreqMatthew Garrett
The acpi core will call request_module("acpi-cpufreq") on subsystem init, but this will fail if the module isn't available at that stage of boot. Add some module aliases to ensure that udev can load the module on Intel and AMD systems with the appropriate feature bits - I /think/ that this will also work on VIA systems, but haven't verified that. References: http://lkml.kernel.org/r/1448223.sdUJnNSRz4@vostro.rjw.lan Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Tested-by: Leonid Isaev <lisaev@umail.iu.edu> Acked-by: Borislav Petkov <bp@suse.de> Cc: 3.7+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-09-09acpi-cpufreq: Add compatibility for legacy AMD cpb sysfs knobAndre Przywara
The powernow-k8 driver supported a sysfs knob called "cpb", which was instantiated per CPU, but actually acted globally for the whole system. To keep some compatibility with this feature, we re-introduce this behavior here, but: a) only enable it on AMD CPUs and b) protect it with a Kconfig switch I'd like to consider this feature obsolete. Lets keep it around for some kernel versions and then phase it out. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-09acpi-cpufreq: Add support for disabling dynamic overclockingAndre Przywara
One feature present in powernow-k8 that isn't present in acpi-cpufreq is support for enabling or disabling AMD's core performance boost technology. This patch adds support to acpi-cpufreq, but also includes support for Intel's dynamic acceleration. The original boost disabling sysfs file was per CPU, but acted globally. Also the naming (cpb) was at least not intuitive. So lets introduce a single file simply called "boost", which sits once in /sys/devices/system/cpu/cpufreq. This should be the only way of using this feature, so add documentation about the rationale and the usage. A following patch will re-introduce the cpb knob for compatibility reasons on AMD CPUs. Per-CPU boost switching is possible, but not trivial and is thus postponed to a later patch series. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-09acpi-cpufreq: Add quirk to disable _PSD usage on all AMD CPUsAndre Przywara
To workaround some Windows specific behavior, the ACPI _PSD table on AMD desktop boards advertises all cores as dependent, meaning that they all can only use the same P-state. acpi-cpufreq strictly obeys this description, instantiating one CPU only and symlinking the others. But the hardware can have distinct frequencies for each core and powernow-k8 did it that way. So, in order to use the hardware to its full potential and keep the original powernow-k8 behavior, lets override the _PSD table setting on AMD hardware. We use the siblings table, as it matches the current hardware behavior. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-09acpi-cpufreq: Add support for modern AMD CPUsMatthew Garrett
The programming model for P-states on modern AMD CPUs is very similar to that of Intel and VIA. It makes sense to consolidate this support into one driver rather than duplicating functionality between two of them. This patch adds support for AMDs with hardware P-state control to acpi-cpufreq. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-13[CPUFREQ] Handle CPUs with different capabilities in acpi-cpufreqMatthew Garrett
acpi-cpufreq checks each CPU for aperf/mperf support, but only sets a global flag. This will cause errors if some CPUs in the system don't support the feature. Check boot_cpu_has() instead in order to make sure that all CPUs support it. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Dave Jones <davej@redhat.com>
2011-07-10[CPUFREQ] fix cpumask memory leak in acpi-cpufreq on cpu hotplug.Luming Yu
I came across a memory leak during a cyclic cpu-online-offline test. Signed-off-by: Yu Luming <luming.yu@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2011-05-19[CPUFREQ] Move x86 drivers to drivers/cpufreq/Dave Jones
Signed-off-by: Dave Jones <davej@redhat.com>