| Age | Commit message (Collapse) | Author |
|---|
|
module_platform_driver() makes the code simpler by eliminating boilerplate
code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
After DMA is complete, the omap_aes_finish_req function is called as
a part of the done_task tasklet. During this its atomic and any calls
to pm functions should not assume they wont sleep.
The patch replaces a call to pm_runtime_put_sync (which can sleep) with
pm_runtime_put thus fixing a kernel panic observed on AM33xx SoC during
AES operation.
Tested on an AM33xx SoC device (beaglebone board).
To reproduce the problem, I used the tcrypt kernel module as:
modprobe tcrypt sec=2 mode=500
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The OMAP3 and OMAP4/AM33xx versions of the AES crypto
module support the CTR algorithm in addition to ECB
and CBC that the OMAP2 version of the module supports.
So, OMAP2 and OMAP3 share a common register set but
OMAP3 supports CTR while OMAP2 doesn't. OMAP4/AM33XX
uses a different register set from OMAP2/OMAP3 and
also supports CTR.
To add this support, use the platform_data introduced
in an ealier commit to hold the list of algorithms
supported by the current module. The probe routine
will use that list to register the correct algorithms.
Note: The code being integrated is from the TI AM33xx SDK
and was written by Greg Turner <gkmturner@gmail.com> and
Herman Schuurman (current email unknown) while at TI.
CC: Greg Turner <gkmturner@gmail.com>
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for the OMAP4 version of the AES module
that is present on OMAP4 and AM33xx SoCs.
The modules have several differences including register
offsets and how DMA is triggered. To handle these
differences, a platform_data structure is defined and
contains routine pointers, register offsets, and bit
offsets within registers. OMAP2/OMAP3-specific routines
are suffixed with '_omap2' and OMAP4/AM33xx routines are
suffixed with '_omap4'.
Note: The code being integrated is from the TI AM33xx SDK
and was written by Greg Turner <gkmturner@gmail.com> and
Herman Schuurman (current email unknown) while at TI.
CC: Greg Turner <gkmturner@gmail.com>
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the dma_request_slave_channel_compat() call instead of
the dma_request_channel() call to request a DMA channel.
This allows the omap-aes driver use different DMA engines.
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add Device Tree suport to the omap-aes crypto
driver. Currently, only support for OMAP2 and
OMAP3 is being added but support for OMAP4 will
be added in a subsequent patch.
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove usage of the private OMAP DMA API.
The dmaengine API will be used instead.
CC: Russell King <rmk+kernel@arm.linux.org.uk>
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add code to use the new dmaengine API alongside
the existing DMA code that uses the private
OMAP DMA API. The API to use is chosen by
defining or undefining 'OMAP_AES_DMA_PRIVATE'.
CC: Russell King <rmk+kernel@arm.linux.org.uk>
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add suspend/resume support to the OMAP AES driver.
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convert the omap-aes crypto driver to use the
pm_runtime API instead of the clk API.
CC: Kevin Hilman <khilman@deeprootsystems.com>
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The AES controller only needs to be reset once and that will
be done by the hwmod infrastructure, if possible. Therefore,
remove the reset code from the omap-aes driver.
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove the unnecessary pr_info() calls from omap_aes_probe()
and omap_aes_mod_init().
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Based on earlier discussions[1] we attempted to find a suitable
location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP:
DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion
to dmaengine is complete.
Unfortunately that was before I was able to try to test compile
of the ARM multiplatform builds for omap2+, and the end result
was not very good.
So I'm creating yet another all over the place patch to cut the
last dependency for building omap2+ for ARM multiplatform. After
this, we have finally removed the driver dependencies to the
arch/arm code, except for few drivers that are being worked on.
The other option was to make the <plat-omap/dma-omap.h> path
to work, but we'd have to add some new header directory to for
multiplatform builds.
Or we would have to manually include arch/arm/plat-omap/include
again from arch/arm/Makefile for omap2+.
Neither of these alternatives sound appealing as they will
likely lead addition of various other headers exposed to the
drivers, which we want to avoid for the multiplatform kernels.
Since we already have a minimal include/linux/omap-dma.h,
let's just use that instead and add a note to it to not
use the custom omap DMA functions any longer where possible.
Note that converting omap DMA to dmaengine depends on
dmaengine supporting automatically incrementing the FIFO
address at the device end, and converting all the remaining
legacy drivers. So it's going to be few more merge windows.
[1] https://patchwork.kernel.org/patch/1519591/#
cc: Russell King <linux@arm.linux.org.uk>
cc: Kevin Hilman <khilman@ti.com>
cc: "Benoît Cousson" <b-cousson@ti.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Vinod Koul <vinod.koul@intel.com>
cc: Dan Williams <djbw@fb.com>
cc: Mauro Carvalho Chehab <mchehab@infradead.org>
cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
cc: David Woodhouse <dwmw2@infradead.org>
cc: Kyungmin Park <kyungmin.park@samsung.com>
cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
cc: Hans Verkuil <hans.verkuil@cisco.com>
cc: Vaibhav Hiremath <hvaibhav@ti.com>
cc: Lokesh Vutla <lokeshvutla@ti.com>
cc: Rusty Russell <rusty@rustcorp.com.au>
cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
cc: Afzal Mohammed <afzal@ti.com>
cc: linux-crypto@vger.kernel.org
cc: linux-media@vger.kernel.org
cc: linux-mtd@lists.infradead.org
cc: linux-usb@vger.kernel.org
cc: linux-fbdev@vger.kernel.org
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
omap-for-v3.8/cleanup-headers
Conflicts:
drivers/crypto/omap-aes.c
drivers/crypto/omap-sham.c
drivers/dma/omap-dma.c
|
|
Drivers should not use cpu_is_omap or cpu_class_is_omap macros,
they should be private to the platform init code. And we'll be
removing plat/cpu.h and only have a private soc.h for the
arch/arm/*omap* code.
This patch is intended as preparation for the core omap changes
and removes the need to include plat/cpu.h from several drivers.
This is needed for the ARM common zImage support.
These changes are OK to do because:
- omap-rng.c does not need plat/cpu.h
- omap-aes.c and omap-sham.c get the proper platform_data
passed to them so they don't need extra checks in the driver
- omap-dma.c and omap-pcm.c can test the arch locally as
omap1 and omap2 cannot be compiled together because of
conflicting compiler flags
Cc: Deepak Saxena <dsaxena@plexity.net>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Venkatraman S <svenkatr@ti.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <djbw@fb.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org
[tony@atomide.com: mmc changes folded in to an earlier patch]
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Move plat/dma.h to plat-omap/dma-omap.h as part of single
zImage work
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Initialization of cra_list is currently mixed, most ciphers initialize this
field and most shashes do not. Initialization however is not needed at all
since cra_list is initialized/overwritten in __crypto_register_alg() with
list_add(). Therefore perform cleanup to remove all unneeded initializations
of this field in 'crypto/drivers/'.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linux-geode@lists.infradead.org
Cc: Michal Ludvig <michal@logix.cz>
Cc: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Cc: Varun Wadekar <vwadekar@nvidia.com>
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: Kent Yoder <key@linux.vnet.ibm.com>
Acked-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The added CRYPTO_ALG_KERN_DRIVER_ONLY indicates whether a cipher
is only available via a kernel driver. If the cipher implementation
might be available by using an instruction set or by porting the
kernel code, then it must not be set.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
clk_get() returns a struct clk cookie to the driver and some platforms
may return NULL if they only support a single clock. clk_get() has only
failed if it returns a ERR_PTR() encoded pointer.
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Reviewed-and-tested-by: Tobias Karnat <tobias.karnat@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
AES module was initialized for every DMA transaction.
That is redundant.
Now it is initialized once per request.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Key and IV should always be set before AES operation.
So no need to check if it has changed or not.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Previous version had not error handling.
Request could remain uncompleted.
Also in the case of DMA error, FLAGS_INIT is unset
and accelerator will be initialized again.
Buffer size allignment is checked.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Submitting request involved double locking for enqueuing and
dequeuing. Now it is done under the same lock.
FLAGS_BUSY is now handled under the same lock.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
DMA parameters for constant data were initialized during driver probe().
It seems that those settings sometimes are lost when devices goes to off mode.
This patch makes DMA initialization just before use.
It solves off mode problems.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
