summaryrefslogtreecommitdiffstats
path: root/drivers/crypto/talitos.h
AgeCommit message (Collapse)Author
2012-07-11crypto: talitos - add sha224, sha384 and sha512 to existing AEAD algorithmsHoria Geanta
With this, now all combinations of CBC: AES, 3DES-EDE with HMAC: SHA-1, SHA-224, SHA-256, SHA-384, SHA-512 are supported. Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11crypto: talitos - export the talitos_submit functionHoria Geanta
This patch exports the talitos_submit function so that on need basis same can be used by other entities. Signed-off-by: Sandeep Malik <Sandeep.Malik@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-11crypto: talitos - move talitos structures to header fileHoria Geanta
This patch moves the talitos structure definitions from c file to its header file so that the same can be shared on need basis. Signed-off-by: Sandeep Malik <Sandeep.Malik@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-21crypto: talitos - support for channel remap and 2nd IRQKim Phillips
Some later SEC v3.x are equipped with a second IRQ line. By correctly assigning IRQ affinity, this feature can be used to increase performance on dual core parts, like the MPC8572E and P2020E. The existence of the 2nd IRQ is determined from the device node's interrupt property. If present, the driver remaps two of four channels, which in turn makes those channels trigger their interrupts on the 2nd line instead of the first. To handle single- and dual-IRQ combinations efficiently, talitos gets two new interrupt handlers and back-half workers. [includes a fix to MCR_LO's address.] Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-21crypto: talitos - prepare driver for channel remap supportKim Phillips
Add a reg member to the channel struct and use it to access channels. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19crypto: talitos - add support for sha224Kim Phillips
SEC h/w versions 2.1 and above support sha224 via explicit instruction. Performing sha224 ahashes on earlier versions is still possible because they support sha256 (sha224 is sha256 with different initial constants and a different truncation length). We do this by overriding hardware context self-initialization, and perform it manually in s/w instead. Thanks to Lee for his fixes for correct execution on actual sec2.0 h/w. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off by: Lee Nipper <lee.nipper@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19crypto: talitos - add hash algorithmsLee Nipper
Add the following alorithms to talitos: md5, sha1, sha256, sha384, sha512. These are all type ahash. Signed-off-by: Lee Nipper <lee.nipper@gmail.com> Acked-By: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-08-13crypto: talitos - add support for 36 bit addressingKim Phillips
Enabling extended addressing in the h/w requires we always assign the extended address component (eptr) of the talitos h/w pointer. This is for e500 based platforms with large memories. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25crypto: remove uses of __constant_{endian} helpersHarvey Harrison
Base versions handle constant folding just fine. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25crypto: talitos - Perform auth check in h/w if on sec 2.1 and aboveKim Phillips
SEC version 2.1 and above adds the capability to do the IPSec ICV memcmp in h/w. Results of the cmp are written back in the descriptor header, along with the done status. A new callback is added that checks these ICCR bits instead of performing the memcmp on the core, and is enabled by h/w capability. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> After testing on different parts, another condition was added before using h/w auth check because different SEC revisions require different handling. The SEC 3.0 allows a more flexible link table where the auth data can span separate link table entries. The SEC 2.4/2.1 does not support this case. So a test was added in the decrypt routine for a fragmented case; the h/w auth check is disallowed for revisions not having the extent in the link table; in this case the hw auth check is done by software. A portion of a previous change for SEC 3.0 link table handling was removed since it became dead code with the hw auth check supported. This seems to be the best compromise for using hw auth check on supporting SEC revisions; it keeps the link table logic simpler for the fragmented cases. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25crypto: talitos - Implement done interrupt mitigationLee Nipper
In talitos_interrupt, upon one done interrupt, mask further done interrupts, and ack only any error interrupt. In talitos_done, unmask done interrupts after completing processing. In flush_channel, ack each done channel processed. Keep done overflow interrupts masked because even though each pkt is ack'ed, a few done overflows still occur. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: talitos - Add support for 3desLee Nipper
This patch adds support for authenc(hmac(sha1),cbc(des3_ede)) to the talitos crypto driver for the Freescale Security Engine. Some adjustments were made to the scatterlist to link table conversion to make 3des work for ping -s 1439..1446. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: talitos - Freescale integrated security engine (SEC) driverKim Phillips
Add support for the SEC available on a wide range of PowerQUICC devices, e.g. MPC8349E, MPC8548E. This initial version supports authenc(hmac(sha1),cbc(aes)) for use with IPsec. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>