summaryrefslogtreecommitdiffstats
path: root/drivers/crypto
AgeCommit message (Collapse)Author
2009-03-04crypto: ixp4xx - Fix qmgr_request_queue build failureKrzysztof Hałasa
There is another user of IXP4xx queue manager, fix it. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-02-26crypto: api - Fix module load deadlock with fallback algorithmsHerbert Xu
With the mandatory algorithm testing at registration, we have now created a deadlock with algorithms requiring fallbacks. This can happen if the module containing the algorithm requiring fallback is loaded first, without the fallback module being loaded first. The system will then try to test the new algorithm, find that it needs to load a fallback, and then try to load that. As both algorithms share the same module alias, it can attempt to load the original algorithm again and block indefinitely. As algorithms requiring fallbacks are a special case, we can fix this by giving them a different module alias than the rest. Then it's just a matter of using the right aliases according to what algorithms we're trying to find. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25crypto: talitos - Ack done interrupt in isr instead of taskletLee Nipper
Previous commit for interrupt mitigation moved the done interrupt acknowlegement from the isr to the talitos_done tasklet. This patch moves the done interrupt acknowledgement back into the isr so that done interrupts will always be acknowledged. This covers the case for acknowledging interrupts for channel done processing that has actually already been completed by the tasklet prior to fielding a pending interrupt. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25crypto: remove uses of __constant_{endian} helpersHarvey Harrison
Base versions handle constant folding just fine. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25crypto: hifn_795x - Use softirq kernel mapping in bh contextEvgeniy Polyakov
Use KM_SOFTIRQ instead of KM_IRQ in tasklet context. Added bug_on on input no-page condition. Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25crypto: hifn_795x - Fix queue managementEvgeniy Polyakov
Fix queue management. Change ring size and perform its check not one after another descriptor, but using stored pointers to the last checked descriptors. Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25crypto: hifn_795x - Remove some unused cruftPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25crypto: hifn_795x - Fix queue processingPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25crypto: hifn_795x - Fix request context corruptionPatrick McHardy
HIFN uses the transform context to store per-request data, which breaks when more than one request is outstanding. Move per request members from struct hifn_context to a new struct hifn_request_context and convert the code to use this. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25crypto: hifn_795x - Don't copy src sg listPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25crypto: hifn_795x - Fix DMA setupPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25crypto: padlock - Avoid resetting cword on successive operationsHerbert Xu
Resetting the control word is quite expensive. Fortunately this isn't an issue for the common operations such as CBC and ECB as the whole operation is done through a single call. However, modes such as LRW and XTS have to call padlock over and over again for one operation which really hurts if each call resets the control word. This patch uses an idea by Sebastian Siewior to store the last control word used on a CPU and only reset the control word if that changes. Note that any task switch automatically resets the control word so we only need to be accurate with regard to the stored control word when no task switches occur. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25crypto: talitos - Preempt overflow interrupts off-by-one fixVishnu Suresh
In commit ec6644d6325b5a38525f1d5b20fd4bf7db05cf2a "crypto: talitos - Preempt overflow interrupts", the test in atomic_inc_not_zero was interpreted by the author to be applied after the increment operation (not before). This off-by-one fix prevents overflow error interrupts from occurring when requests are frequent and large enough to do so. Signed-off-by: Vishnu Suresh <Vishnu@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25crypto: talitos - Perform auth check in h/w if on sec 2.1 and aboveKim Phillips
SEC version 2.1 and above adds the capability to do the IPSec ICV memcmp in h/w. Results of the cmp are written back in the descriptor header, along with the done status. A new callback is added that checks these ICCR bits instead of performing the memcmp on the core, and is enabled by h/w capability. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> After testing on different parts, another condition was added before using h/w auth check because different SEC revisions require different handling. The SEC 3.0 allows a more flexible link table where the auth data can span separate link table entries. The SEC 2.4/2.1 does not support this case. So a test was added in the decrypt routine for a fragmented case; the h/w auth check is disallowed for revisions not having the extent in the link table; in this case the hw auth check is done by software. A portion of a previous change for SEC 3.0 link table handling was removed since it became dead code with the hw auth check supported. This seems to be the best compromise for using hw auth check on supporting SEC revisions; it keeps the link table logic simpler for the fragmented cases. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25crypto: talitos - Implement done interrupt mitigationLee Nipper
In talitos_interrupt, upon one done interrupt, mask further done interrupts, and ack only any error interrupt. In talitos_done, unmask done interrupts after completing processing. In flush_channel, ack each done channel processed. Keep done overflow interrupts masked because even though each pkt is ack'ed, a few done overflows still occur. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25crypto: talitos - Pass correct interrupt status to error handlerKim Phillips
Since we ack early, the re-read interrupt status in talitos_error may be already updated with a new value. Pass the error ISR value directly in order to report and handle the error based on the correct error status. Also remove unused error tasklet. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-12-25crypto: hifn - Disable driver when physical size exceeds 32 bitsEvgeniy Polyakov
On Tue, Sep 23, 2008 at 08:06:32PM +0200, Dimitri Puzin (max@psycast.de) wrote: > With this patch applied it still doesn't work as expected. The overflow > messages are gone however syslog shows > [ 120.924266] hifn0: abort: c: 0, s: 1, d: 0, r: 0. > when doing cryptsetup luksFormat as in original e-mail. At this point > cryptsetup hangs and can't be killed with -SIGKILL. I've attached > SysRq-t dump of this condition. Yes, I was wrong with the patch: HIFN does not support 64-bit addresses afaics. Attached patch should not allow HIFN to be registered on 64-bit arch, so crypto layer will fallback to the software algorithms. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-11-30fix talitosAl Viro
talitos_remove() can be called from talitos_probe() on failure exit path, so it can't be __devexit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-14crypto: talitos - Avoid consecutive packets going out with same IVKim Phillips
The SEC's h/w IV out implementation DMAs the trailing encrypted payload block of the last encryption to ctx->iv. Since the last encryption may still be pending completion, we can sufficiently prevent successive packets from being transmitted with the same IV by xoring with sequence number. Also initialize alg_list earlier to prevent oopsing on a failed probe. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-13crypto: padlock - fix VIA PadLock instruction usage with irq_ts_save/restore()Suresh Siddha
Wolfgang Walter reported this oops on his via C3 using padlock for AES-encryption: ################################################################## BUG: unable to handle kernel NULL pointer dereference at 000001f0 IP: [<c01028c5>] __switch_to+0x30/0x117 *pde = 00000000 Oops: 0002 [#1] PREEMPT Modules linked in: Pid: 2071, comm: sleep Not tainted (2.6.26 #11) EIP: 0060:[<c01028c5>] EFLAGS: 00010002 CPU: 0 EIP is at __switch_to+0x30/0x117 EAX: 00000000 EBX: c0493300 ECX: dc48dd00 EDX: c0493300 ESI: dc48dd00 EDI: c0493530 EBP: c04cff8c ESP: c04cff7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Process sleep (pid: 2071, ti=c04ce000 task=dc48dd00 task.ti=d2fe6000) Stack: dc48df30 c0493300 00000000 00000000 d2fe7f44 c03b5b43 c04cffc8 00000046 c0131856 0000005a dc472d3c c0493300 c0493470 d983ae00 00002696 00000000 c0239f54 00000000 c04c4000 c04cffd8 c01025fe c04f3740 00049800 c04cffe0 Call Trace: [<c03b5b43>] ? schedule+0x285/0x2ff [<c0131856>] ? pm_qos_requirement+0x3c/0x53 [<c0239f54>] ? acpi_processor_idle+0x0/0x434 [<c01025fe>] ? cpu_idle+0x73/0x7f [<c03a4dcd>] ? rest_init+0x61/0x63 ======================= Wolfgang also found out that adding kernel_fpu_begin() and kernel_fpu_end() around the padlock instructions fix the oops. Suresh wrote: These padlock instructions though don't use/touch SSE registers, but it behaves similar to other SSE instructions. For example, it might cause DNA faults when cr0.ts is set. While this is a spurious DNA trap, it might cause oops with the recent fpu code changes. This is the code sequence that is probably causing this problem: a) new app is getting exec'd and it is somewhere in between start_thread() and flush_old_exec() in the load_xyz_binary() b) At pont "a", task's fpu state (like TS_USEDFPU, used_math() etc) is cleared. c) Now we get an interrupt/softirq which starts using these encrypt/decrypt routines in the network stack. This generates a math fault (as cr0.ts is '1') which sets TS_USEDFPU and restores the math that is in the task's xstate. d) Return to exec code path, which does start_thread() which does free_thread_xstate() and sets xstate pointer to NULL while the TS_USEDFPU is still set. e) At the next context switch from the new exec'd task to another task, we have a scenarios where TS_USEDFPU is set but xstate pointer is null. This can cause an oops during unlazy_fpu() in __switch_to() Now: 1) This should happen with or with out pre-emption. Viro also encountered similar problem with out CONFIG_PREEMPT. 2) kernel_fpu_begin() and kernel_fpu_end() will fix this problem, because kernel_fpu_begin() will manually do a clts() and won't run in to the situation of setting TS_USEDFPU in step "c" above. 3) This was working before the fpu changes, because its a spurious math fault which doesn't corrupt any fpu/sse registers and the task's math state was always in an allocated state. With out the recent lazy fpu allocation changes, while we don't see oops, there is a possible race still present in older kernels(for example, while kernel is using kernel_fpu_begin() in some optimized clear/copy page and an interrupt/softirq happens which uses these padlock instructions generating DNA fault). This is the failing scenario that existed even before the lazy fpu allocation changes: 0. CPU's TS flag is set 1. kernel using FPU in some optimized copy routine and while doing kernel_fpu_begin() takes an interrupt just before doing clts() 2. Takes an interrupt and ipsec uses padlock instruction. And we take a DNA fault as TS flag is still set. 3. We handle the DNA fault and set TS_USEDFPU and clear cr0.ts 4. We complete the padlock routine 5. Go back to step-1, which resumes clts() in kernel_fpu_begin(), finishes the optimized copy routine and does kernel_fpu_end(). At this point, we have cr0.ts again set to '1' but the task's TS_USEFPU is stilll set and not cleared. 6. Now kernel resumes its user operation. And at the next context switch, kernel sees it has do a FP save as TS_USEDFPU is still set and then will do a unlazy_fpu() in __switch_to(). unlazy_fpu() will take a DNA fault, as cr0.ts is '1' and now, because we are in __switch_to(), math_state_restore() will get confused and will restore the next task's FP state and will save it in prev tasks's FP state. Remember, in __switch_to() we are already on the stack of the next task but take a DNA fault for the prev task. This causes the fpu leakage. Fix the padlock instruction usage by calling them inside the context of new routines irq_ts_save/restore(), which clear/restore cr0.ts manually in the interrupt context. This will not generate spurious DNA in the context of the interrupt which will fix the oops encountered and the possible FPU leakage issue. Reported-and-bisected-by: Wolfgang Walter <wolfgang.walter@stwm.de> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-13crypto: talitos - Add handling for SEC 3.x treatment of link tableLee Nipper
Later SEC revision requires the link table (used for scatter/gather) to have an extra entry to account for the total length in descriptor [4], which contains cipher Input and ICV. This only applies to decrypt, not encrypt. Without this change, on 837x, a gather return/length error results when a decryption uses a link table to gather the fragments. This is observed by doing a ping with size of 1447 or larger with AES, or a ping with size 1455 or larger with 3des. So, add check for SEC compatible "fsl,3.0" for using extra link table entry. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-17crypto: talitos - sparse fixKim Phillips
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-17crypto: talitos - Stop leaking memory in error pathKim Phillips
free edescriptor when returning error (such as -EAGAIN). Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-17crypto: talitos - Fix GFP flag usageKim Phillips
use GFP_ATOMIC when necessary; use atomic_t when allocating submit_count. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-17crypto: talitos - Preempt overflow interruptsKim Phillips
add requests pending/submit count to prevent request queue full condition by preempting h/w overflow interrupts in software. We do this due to the delay in the delivery and handling of the channel overflow error interrupt. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-17crypto: talitos - Correct dst != src case handlingLee Nipper
Seems that dst == src, but this fixes the logic in case it's not. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-17crypto: talitos - Remove calls to of_node_putLee Nipper
Remove of_node_put calls since there is no corresponding of_node_get. This patch prevents an exception when talitos is loaded a 2nd time. This sequence: modprobe talitos; rmmod talitos; modprobe talitos causes this message: "WARNING: Bad of_node_put() on /soc8349@e0000000/crypto@30000". Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-13crypto: ixp4xx - Select CRYPTO_AUTHENCImre Kaloz
Without CRYPTO_AUTHENC the driver fails to build: drivers/built-in.o: In function `ixp_module_init': ixp4xx_crypto.c:(.init.text+0x3250): undefined reference to `crypto_aead_type' Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: talitos - Add support for sha256 and md5 variantsLee Nipper
This patch adds support for: authenc(hmac(sha256),cbc(aes)), authenc(hmac(sha256),cbc(des3_ede)), authenc(hmac(md5),cbc(aes)), authenc(hmac(md5),cbc(des3_ede)). Some constant usage was changed to use aes, des, and sha include files. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: talitos - Use proper form for algorithm driver namesHerbert Xu
The name authenc(hmac(sha1-talitos),cbc(aes-talitos)) is potentially ambiguous since it could also mean using the generic authenc template on hmac(sha1-talitos) and cbc(aes-talitos). In general, parentheses should be reserved for templates that spawn algorithms. This patches changes it to the form authenc-hmac-sha1-cbc-aes-talitos. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: talitos - Add support for 3desLee Nipper
This patch adds support for authenc(hmac(sha1),cbc(des3_ede)) to the talitos crypto driver for the Freescale Security Engine. Some adjustments were made to the scatterlist to link table conversion to make 3des work for ping -s 1439..1446. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: padlock - Make module loading quieter when hardware isn't availableJeremy Katz
When loading aes or sha256 via the module aliases, the padlock modules also try to get loaded. Make the error message for them not being present only be a NOTICE rather than an ERROR so that use of 'quiet' will suppress the messages Signed-off-by: Jeremy Katz <katzj@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: ixp4xx - Hardware crypto support for IXP4xx CPUsChristian Hohnstaedt
Add support for the hardware crypto engine provided by the NPE C of the Intel IXP4xx networking processor series. Supported ciphers: des, des3, aes and a combination of them with md5 and sha1 hmac Signed-off-by: Christian Hohnstaedt <chohnstaedt@innominate.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: talitos - Freescale integrated security engine (SEC) driverKim Phillips
Add support for the SEC available on a wide range of PowerQUICC devices, e.g. MPC8349E, MPC8548E. This initial version supports authenc(hmac(sha1),cbc(aes)) for use with IPsec. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[CRYPTO] hifn: Simplify code using ARRAY_SIZE() macroRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[CRYPTO] hifn: Remove duplicated includeHuang Weiyi
Removed duplicated include file <linux/interrupt.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Have HW invalidate src and dest descriptors after processingPatrick McHardy
The descriptors need to be invalidated after processing for ring cleanup to work properly and to avoid using an old destination descriptor when the src and cmd descriptors are already set up and the dst descriptor isn't. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Move command descriptor setup to seperate functionPatrick McHardy
Move command descriptor setup to seperate function as preparation for the following DMA setup fixes. Note 1: also fix a harmless typo while moving it: sa_idx is initialized to dma->resi instead of dma->cmdi. Note 2: errors from command descriptor setup are not propagated back, anymore, they can't be handled anyway and all conditions leading to errors should be checked earlier. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Fix max queue length valuePatrick McHardy
All but the last element of the command and result descriptor rings can be used for crypto requests, fix HIFN_QUEUE_LENGTH. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Properly initialize ivsize for CBC modesPatrick McHardy
For combined modes like cbc(aes) the driver is responsible for initializing ivsize. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Use unique driver names for different algosPatrick McHardy
When the CryptoAPI instantiates a new algorithm, it performs a lookup by driver name. Since hifn uses the same name for all modes of one algorithm, the lookup may return an incorrect algorithm. Change the name to use <mode>-<algo>-<devicename> to provide unique names for the different combinations and devices. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Properly handle requests for less than the full scatterlistPatrick McHardy
The scatterlist may contain more data than the crypto request, causing an underflow of the remaining byte count while walking the list. Use the minimum of the scatterlist element size and the remaining byte count specified in the crypto request to avoid this. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Fix data alignment checksPatrick McHardy
The check for misalignment of the scatterlist data has two bugs: - the source buffer doesn't need to be aligned at all - the destination buffer and its size needs to be aligned to a multiple of 4, not to the crypto alg blocksize Introduce symbolic constant for destination buffer alignment requirements, use it instead of the crypto alg blocksize and remove the unnecessary checks for source buffer alignment and change cra_alignmask to zero. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Handle ablkcipher_walk errorsPatrick McHardy
ablkcipher_walk may return a negative error value, handle this properly instead of treating it as a huge number of scatter-gather elements. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Indicate asynchronous processing to crypto APIPatrick McHardy
hifn_setup_crypto() needs to return -EINPROGRESS on success to indicate asynchronous processing to the crypto API. This also means it must not return the errno code returned by hifn_process_queue(), if any. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Remove printk_ratelimit() for debugging printkPatrick McHardy
Without debugging this spams the log with "printk: N messages surpressed" without any actual messages on error. With debugging its more useful to always see the message. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[HIFN]: Endianess fixesPatrick McHardy
HIFN uses little-endian by default, move cpu_to_le32 conversion to hifn_write_0/ hifn_write_1, add sparse annotations and fix an invalid endian conversion in hifn_setup_src_desc. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21[CRYPTO] padlock-aes: Use generic setkey functionSebastian Siewior
The Padlock AES setkey routine is the same as exported by the generic implementation. So we could use it. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Cc: Michal Ludvig <michal@logix.cz> Tested-by: Stefan Hellermann <stefan@the2masters.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21[CRYPTO] sha384: Hardware acceleration for s390Jan Glauber
Exploit the System z10 hardware acceleration for SHA384. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>